| Age | Commit message (Collapse) | Author |
|---|
|
On most platforms, _LID returning value, lid open/close events are all
reliable, but there are exceptions. Some AML tables report wrong initial
lid state [1], and some of them never report lid open state [2].
The usage model on such buggy platforms is:
1. The initial lid state returned from _LID is not reliable;
2. The lid open event is not reliable;
3. The lid close event is always reliable, used by the platform firmware to
trigger OSPM power saving operations.
This usage model is not compliant to the Linux SW_LID model as the Linux
userspace is very strict to the reliability of the open events.
In order not to trigger issues on such buggy platforms, the ACPI button
driver currently implements a lid_init_state=open quirk to send additional
"open" event after resuming. However, this is still not sufficient because:
1. Some special usage models (e.x., the dark resume scenario) cannot be
supported by this mode.
2. If a "close" event is not used to trigger "suspend", then the subsequent
"close" events cannot be seen by the userspace.
So we need to stop sending the additional "open" event and switch the
driver to lid_init_state=ignore mode and make sure the platform triggered
events can be reliably delivered to the userspace. The userspace programs
then can be changed to not to be strict to the "open" events on such buggy
platforms.
Why will the subsequent "close" events be lost? This is because the input
layer automatically filters redundant events for switch events. Thus given
that the buggy AML tables do not guarantee paired "open"/"close" events,
the ACPI button driver currently is not able to guarantee that the platform
triggered reliable events can be always be seen by the userspace via
SW_LID.
This patch adds a mechanism to insert lid events as a compensation for the
platform triggered ones to form a complete event switches in order to make
sure that the platform triggered events can always be reliably delivered
to the userspace. This essentially guarantees that the platform triggered
reliable "close" events will always be relibly delivered to the userspace.
However this mechanism is not suitable for lid_init_state=open/method as
it should not send the complement switch event for the unreliable initial
lid state notification. 2 unreliable events can trigger unexpected
behavior. Thus this patch only implements this mechanism for
lid_init_state=ignore.
Known issues:
1. Possible alternative approach
This approach is based on the fact that Linux requires a switch event
type for LID events. Another approach is to use key event type to
implement ACPI lid events.
With SW event type, since ACPI button driver inserts wrong lid events,
there could be a potential issue that an "open" event issued from some
AML update methods could result in a wrong "close" event to be delivered
to the userspace. While using KEY event type, there is no such problem.
However there may not be such a kind of real case, and if there is such
a case, it is worked around in this patch as the complement switch event
is only generated for "close" event in order to deliver the reliable
"close" event to the userspace.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89211 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106151 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106941 # [2]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When we removed the procfs dir on error or if the driver is
unbound, the two variables acpi_lid_dir and acpi_button_dir
were not reset. On the next rebind, those static variables
were not null and we couldn't re-register the device again.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Linux userspace (systemd-logind) keeps on rechecking lid state when the
lid state is closed. If it failed to update the lid state to open after
boot/resume, the system suspending right after the boot/resume could be
resulted.
Graphics drivers also use the lid notifications to implment
MODESET_ON_LID_OPEN option.
Before the situation is improved from the userspace and from the graphics
driver, users can simply configure ACPI button driver to send initial
"open" lid state using button.lid_init_state=open to avoid such kind of
issues.
And our ultimate target should be making button.lid_init_state=ignore
the default behavior. This patch implements the 2 options and keep the
old behavior (button.lid_init_state=method).
Link: https://lkml.org/2016/3/7/460
Link: https://github.com/systemd/systemd/issues/2087
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
(Correct a wrong macro usage.)
This patch simplies the code by merging some redundant code.
No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The _LID control method's initial returning value is not reliable.
The _LID control method is described to return the "current" lid state.
However the word of "current" has ambiguity, many BIOSen return the lid
state upon the last lid notification instead of returning the lid state
upon the last _LID evaluation. There won't be difference when the _LID
control method is evaluated during the runtime, the problem is its initial
returning value. When the BIOSen implement this control method with cached
value, the initial returning value is likely not reliable. There are simply
so many examples retuning "close" as initial lid state (Link 1), sending
this state to the userspace causes suspending right after booting/resuming.
Since the lid state is implemented by the BIOSen, the kernel lid driver has
no idea how it can be correct, this patch stops sending the initial lid
state to the userspace to try to avoid sending the wrong lid state to the
userspace to trigger such kind of wrong suspending. This actually reverts
the following commit introduced for fixing a Novell bug:
Commit: 23de5d9ef2a4bbc4f733f58311bcb7cf6239c813
Subject: ACPI: button: send initial lid state after add and resume
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89211
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106151
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106941
Link: https://bugzilla.novell.com/show_bug.cgi?id=326814
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
During system suspend mark ACPI buttons (other than the lid) as
"suspended" and if in that state, report wakeup events on button
events, but do not propagate those events up the stack.
This prevents systems from being turned off after a button-triggered
wakeup from the "freeze" sleep state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77611
Tested-on: Acer Aspire S5, Toshiba Portege R500
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface)
removed ACPI Button event which originally was sent to userspace via
/proc/acpi/event. This caused ACPI shutdown regression on gentoo
in VirtualBox. Now ACPI events are sent to userspace via netlink,
so add ACPI Button event back via netlink routine.
References: https://bugzilla.kernel.org/show_bug.cgi?id=71721
Reported-and-tested-by: Richard Musil <richard.musil@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI button driver defines acpi_button_resume() when
CONFIG_PM_SLEEP is defined. This results in the following
compile error when CONFIG_PM_SLEEP is undefined:
drivers/acpi/button.c:85:8: error: ‘acpi_button_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
'acpi-sleep'
* acpi-gpe:
ACPI / EC: disable GPE before removing GPE handler
ACPI / Button: Fix enabling button GPEs twice
* acpi-video:
ACPI: Blacklist Win8 OSI for some HP laptop 2013 models
ACPI / video: Fix typo in video_detect.c
* acpi-thermal:
ACPI / thermal: remove const from thermal_zone_device_ops declaration
* acpi-processor:
ACPI / scan: bail out early if failed to parse APIC ID for CPU
* acpi-sleep:
ACPI / sleep: remove panic in case hardware has changed after S4
|
|
Button GPEs have been enabled in the acpi_wake_device_init() during
boot and the button driver enables them for the second time.
Consequently, it is necessary to do
# echo disable > /sys/firmware/acpi/interrupts/gpeXXX
twice in a row to disable those GPEs via sysfs. This patch is to
remove the GPE enabling code from the button driver to avoid the
problem.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Input layer provides input_set_capability() to set input device's event
related bits. This patch is to use it to replace origin code.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is quite some time that this one has been deprecated.
Get rid of it.
Should some really important user be overseen, it may be reverted and
the userspace program worked on first, but it is time to do something
to get rid of this old stuff...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
|
|
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch fixes following compiler warnings when build via make W=1:
drivers/acpi/button.c:220:5: warning: no previous prototype for ‘acpi_lid_notifier_register’ [-Wmissing-prototypes]
drivers/acpi/button.c:226:5: warning: no previous prototype for ‘acpi_lid_notifier_unregister’ [-Wmissing-prototypes]
drivers/acpi/button.c:232:5: warning: no previous prototype for ‘acpi_lid_open’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field. For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
|
|
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Make the ACPI button driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Remove unused ACPI button procfs interface.
Only /proc/acpi/button/lid/LID/state remains.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
If a button device had already been enabled to wake up the system
from sleep states before the button driver saw it, the driver
shouldn't disable the device's wakeup capability when being detached
from the device.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
The wakeup.run_wake_count ACPI device field is only used by the PCI
runtime PM code to "protect" devices from being prepared for
generating wakeup signals more than once in a row. However, it
really doesn't provide any protection, because (1) all of the
functions it is supposed to protect use their own reference counters
effectively ensuring that the device will be set up for generating
wakeup signals just once and (2) the PCI runtime PM code uses
wakeup.run_wake_count in a racy way, since nothing prevents
acpi_dev_run_wake() from being called concurrently from two different
threads for the same device.
Remove the wakeup.run_wake_count ACPI device field which is
unnecessary, confusing and used in a wrong way.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Since ACPI buttons and lids can be configured to wake up the system
from sleep states, report wakeup events from these devices.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
There are ACPI devices (buttons and the laptop lid) that can wake up
the system from sleep states and have no "physical" companion
devices. The ACPI subsystem uses two flags, wakeup.state.enabled and
wakeup.flags.always_enabled, for handling those devices, but they
are not accessible through the standard device wakeup infrastructure.
User space can only control them via the /proc/acpi/wakeup interface
that is not really convenient (e.g. the way in which devices are
enabled to wake up the system is not portable between different
systems, because it requires one to know the devices' "names" used in
the system's ACPI tables).
To address this problem, use standard device wakeup flags instead of
the special ACPI flags for handling those devices. In particular,
use device_set_wakeup_capable() to mark the ACPI wakeup devices
during initialization and use device_set_wakeup_enable() to allow
or disallow them to wake up the system from sleep states. Rework
the /proc/acpi/wakeup interface to take these changes into account.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
After the previous patch that introduced acpi_gpe_wakeup() and
modified the ACPI suspend and wakeup code to use it, the third
argument of acpi_{enable|disable}_gpe() and the GPE wakeup
reference counter are not necessary any more. Remove them and
modify all of the users of acpi_{enable|disable}_gpe()
accordingly. Also drop GPE type constants that aren't used
any more.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
After commit 9630bdd9b15d2f489c646d8bc04b60e53eb5ec78
(ACPI: Use GPE reference counting to support shared GPEs) the wakeup
enable mask bits of GPEs are set as soon as the GPEs are enabled to
wake up the system. Unfortunately, this leads to a regression
reported by Michal Hocko, where a system is woken up from ACPI S5 by
a device that is not supposed to do that, because the wakeup enable
mask bit of this device's GPE is always set when
acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(),
although it should only be set if the device is supposed to wake up
the system from the target state.
To work around this issue, rework the ACPI power management code so
that GPEs are not enabled to wake up the system upfront, but only
during a system state transition when the target state of the system
is known. [Of course, this means that the reference counting of
"wakeup" GPEs doesn't really make sense and it is sufficient to
set/unset the wakeup mask bits for them during system sleep
transitions. This will allow us to simplify the GPE handling code
quite a bit, but that change is too intrusive for 2.6.35.]
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Use the run_wake flag to mark all devices for which run-time wake-up
events may be generated by the platform. Introduce a new wake-up
flag, always_enabled, for marking devices that should be permanently
enabled to generate run-time events. Also, introduce a reference
counter for run-wake devices and a function that will initialize all
of the run-time wake-up fields for given device.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
ACPI GPEs may map to multiple devices. The current GPE interface
only provides a mechanism for enabling and disabling GPEs, making
it difficult to change the state of GPEs at runtime without extensive
cooperation between devices.
Add an API to allow devices to indicate whether or not they want
their device's GPE to be enabled for both runtime and wakeup events.
Remove the old GPE type handling entirely, which gets rid of various
quirks, like the implicit disabling with GPE type setting. This
requires a small amount of rework in order to ensure that non-wake
GPEs are enabled by default to preserve existing behaviour.
Based on patches from Matthew Garrett <mjg@redhat.com>.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
On some laptops it will return NOTIFY_OK(non-zero) when calling the ACPI LID
notifier. Then it is used as the result of ACPI LID resume function, which
will complain the following warning message in course of suspend/resume:
>PM: Device PNP0C0D:00 failed to resume: error 1
This patch is to eliminate the above warning message.
http://bugzilla.kernel.org/show_bug.cgi?id=14782
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
If a call comes in to check the lid state but there's no lid device
present, we should return -ENODEV.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits)
drm/i915: Handle ERESTARTSYS during page fault
drm/i915: Warn before mmaping a purgeable buffer.
drm/i915: Track purged state.
drm/i915: Remove eviction debug spam
drm/i915: Immediately discard any backing storage for uneeded objects
drm/i915: Do not mis-classify clean objects as purgeable
drm/i915: Whitespace correction for madv
drm/i915: BUG_ON page refleak during unbind
drm/i915: Search harder for a reusable object
drm/i915: Clean up evict from list.
drm/i915: Add tracepoints
drm/i915: framebuffer compression for GM45+
drm/i915: split display functions by chip type
drm/i915: Skip the sanity checks if the current relocation is valid
drm/i915: Check that the relocation points to within the target
drm/i915: correct FBC update when pipe base update occurs
drm/i915: blacklist Acer AspireOne lid status
ACPI: make ACPI button funcs no-ops if not built in
drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks
drm/i915: intel_display.c handle latency variable efficiently
...
Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
|
|
Some drivers need to know when a lid event occurs and get the current
status. This can be useful for when a platform firmware clobbers some
hardware state at lid time, and a driver needs to restore things when
the lid is opened again.
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.
Add GPL commment to internal.h while we are there.
This does not change any actual console output,
asside from a whitespace fix.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This patch removes the driver distinction between control method (CM)
and fixed hardware (FF) buttons. We previously needed that so we
could install either a fixed event handler or a notify handler, but
the Linux/ACPI code now handles that for us, so we don't need to
worry about it.
Note that this removes the FF/CM annotation from the "info" files
in /proc. For example,
/proc/acpi/button/PWRF/info:
-type: Power Button (FF)
+type: Power Button
I don't think there's anything meaningful user-space can do by
knowing whether a button is a control method or a fixed hardware
button, so nobody should be looking at the FF/CM.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
We no longer need a pointer from struct acpi_button back to the
struct acpi_device. Everywhere we used that pointer, we either
already have, or can easily get, the acpi_device pointer without
using the copy from acpi_button. So this patch removes the
structure element.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This patch adds temporaries to cache the acpi_device_hid(),
acpi_device_name(), and acpi_device_class() pointers so we
don't have to clutter the code with so many uses of those
interfaces.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It's typical and slightly more compact to look up the driver_data
structure by initializing the automatic variable at its definition.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Better to oops and learn about a bug than to silently cover it up.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This patch changes a bit of whitespace to follow Linux conventions.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This patch adds a .notify() method. The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.
Note that events from fixed hardware buttons now show up as a special
notify event, so to preserve user-space backward compatibility, we
convert that back to ACPI_BUTTON_NOTIFY_STATUS.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.
We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.
But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.
->read_proc/->write_proc were just fixed to not require ->owner for
protection.
rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.
Removing ->owner will also make PDE smaller.
So, let's nuke it.
Kudos to Jeff Layton for reminding about this, let's say, oversight.
http://bugzilla.kernel.org/show_bug.cgi?id=12454
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
|
|
|
|
Disabling gpe might interfere with gpe detection/handling,
thus producing "interrupt not handled" errors.
Ironically, disabling of GPE from interrupt context is already
under spinlock, so only userspace needs to start using it.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Currently not always an EV_SYN event is reported to userland
after the EV_SW SW_LID event has been sent. This is easy to verify
by using “input-events” from input-utils and just closing and opening
the lid.
Signed-off-by: Guillem Jover <guillem.jover@nokia.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Conflicts:
drivers/acpi/bay.c
drivers/acpi/dock.c
drivers/ata/libata-acpi.c
Signed-off-by: Len Brown <len.brown@intel.com>
|
