| Age | Commit message (Collapse) | Author |
|---|
|
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
full_charge_capacity
On some devices (with a buggy _BIX implementation) full_charge_capacity
always reports as 0. This means that our energy_full sysfs attribute will
also always be 0, which is not useful to export.
Worse we calculate our reported capacity on full_charge_capacity and if it
is 0 we always report 0. This causes userspace to immediately shutdown or
hibernate the laptop since it assumes that the battery is critically low.
This commit makes us not report energy_full[_design] or capacity on such
broken devices, avoiding the immediate shutdown / hibernate from userspace.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=83941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Simple conditions without negations inflict less cognitive load
on readers.
Rework conditional branches not to use negations. Also add braces
around single statement branches where their counterpart else-branches
consist of more than one statement as suggested in the paragraph 3 of
the coding style.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The kernel provides specialized macros for printing
info and warning messages which make the code shorter.
Use the specialized macros instead of bare printk()'s.
Also format one user visible string literal into a searchable one
line string.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Headers ordered alphabetically as easier to maintain.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The driver can be built as a module thus inclusion of init.h is
redundant in battery.c since it's always included by module.h.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On removal battery_present changes from 1 to 0 after calling
acpi_battery_get_status() and battery->update_time is set to 0
before returning.
On insertion battery_present changes from 0 to 1 after calling
acpi_battery_get_status() and acpi_battery_get_info() is called
because battery->update_time is 0.
The old_present condition is therefore redundant.
This was added in the commit below when there was a path without
sysfs that would skip getting the newly inserted battery info.
commit 50b178512b7d ("Newly inserted battery might differ from one
just removed, so update of battery info fields is required.")
Signed-off-by: Lucas Rangit Magasweran <lucas.magasweran@ieee.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed
by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.
Additionally, a lock was kept in place and debugging information was
printed out of order.
Fixes: fa93854f7a7e (battery: Add the battery hooking API)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20180508 upstream
revision and make it support the RT patch, add CPPC v3 support to the
ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes
with the RTC, add quirks to the ACPI AC and battery drivers, and
update the ACPI SoC drivers.
Specifics:
- Update the ACPICA code in the kernel to the 20180508 upstream
revision including:
* iASL -tc option enhancement (Bob Moore).
* Debugger improvements (Bob Moore).
* Support for tables larger than 1 MB in acpidump/acpixtract (Bob
Moore).
* Minor fixes and cleanups (Colin Ian King, Toomas Soome).
- Make the ACPICA code in the kernel support the RT patch (Sebastian
Andrzej Siewior, Steven Rostedt).
- Add a kmemleak annotation to the ACPICA code (Larry Finger).
- Add CPPC v3 support to the ACPI CPPC library and fix two issues
related to CPPC (Prashanth Prakash, Al Stone).
- Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems
where WDAT clashes with the RTC SRAM (Mika Westerberg).
- Add some quirks to the ACPI AC and battery drivers (Carlo Caione,
Hans de Goede).
- Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD)
platforms (Akshu Agrawal, Hans de Goede).
- Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu
Malaterre)"
* tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks
ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM
mailbox: PCC: erroneous error message when parsing ACPI PCCT
ACPICA: Update version to 20180508
ACPICA: acpidump/acpixtract: Support for tables larger than 1MB
ACPI: APD: Add AMD misc clock handler support
clk: x86: Add ST oscout platform clock
ACPICA: Update version to 20180427
ACPICA: Debugger: Removed direct support for EC address space in "Test Objects"
ACPICA: Debugger: Add Package support for "test objects" command
ACPICA: Improve error messages for the namespace root node
ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list
ACPICA: vsnprintf: this statement may fall through
ACPICA: Tables: Fix spelling mistake in comment
ACPICA: iASL: Enhance the -tc option (create AML hex file in C)
ACPI: Add missing prototype_for arch_post_acpi_subsys_init()
ACPI / tables: improve comments regarding acpi_parse_entries_array()
ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock
ACPICA: provide abstraction for raw_spinlock_t
ACPI / CPPC: Fix invalid PCC channel status errors
...
|
|
Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls. Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With commit dccfae6d4f4c (ACPI / battery: Add a blacklist with PMIC ACPI
HIDs with a native battery driver) a blacklist was introduced to avoid
using the ACPI drivers for the battery when a native PMIC driver was
already present. While this is in general a good idea (because of broken
DSDT or proprietary and undocumented ACPI opregions for the ACPI battery
devices) there are some Cherry Trail devices which use a separate FG
controller despite the AXP288 having a builtin FG.
The net effect of blacklisting the ACPI drivers is that on these devices
the battery reporting is broken since the AXP288 PMIC FG bits are not
actually used on this hardware.
This commit adds a battery_do_not_check_pmic quirk for this and sets
this on the 2 devices currently known to use a separate FG controller,
the ECS EF20EA and the Lenovo Ideapad Miix 320.
[hdegoede@redhat.com: Merge the quirk handling and the adding of the DMI
table entry into 1 commit, add a second DMI entry for the Miix 320.]
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
broken
On some devices the "AC" interface ACPI AML code uses the exact same broken
logic which is causing the battery code to wrongly report discharging to
determine the "AC" state. Specifically the ACPI AML code is checking the
charging status bits of the charger-IC rather then the vbus present or
power-good status bits.
This makes our workaround for devices which wrongly report discharging when
plugged into AC while the charge is above the start charging threshold not
work on these devices.
This commit adds a battery_ac_is_broken flag and when that is set it skips
the power_supply_is_system_supplied() check in the workaround fixing this.
This flag gets set by a DMI quirk selected by systems where we know the AC
AML code is broken in this way *and* the rate_now value can be trusted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On quite a few devices the battery code in the ACPI tables is buggy and
first checks the charging status bits of the charger-IC, and if those
report not charging it will report discharging, without looking at the
presence of AC power or at the battery dis(charge) current from the
fuel-gauge.
This causes the wrong status to be reported for the battery in the
following quite common scenario:
1) Plug in charger while battery is say half full, battery starts
charging, charging state bits indicate: pre-charge or fast-charge,
ACPI reported battery status is ok
2) When fully charged charging state bits indicate: end-of-charge,
ACPI reported battery status is ok
3) unplug the charger, wait 1 minute, replug. Now the battery voltage is
still above the start-charging threshold, so the charger will not start
charging to avoid wrecking the battery by repeatedly recharging the last 1%
capacity. The charger IC charging state bits now are all 0 (not-charging)
and the broken ACPI code wrongly translate this to "discharging" and ends
up setting the ACPI_BATTERY_STATE_DISCHARGING bit in its state field.
Reporting this "not charging" state as discharging is confusing for users,
making the user think his adapter/power-brick is broken or not properly
plugged in.
This commit adds a helper for handling the ACPI_BATTERY_STATE_DISCHARGING
state. This helper checks if we're an AC and the current going out of the
battery is 0 and in that case reports a status of "not charging" to
userspace rather then "discharging".
This replaces commit c68f0676ef7d ("ACPI / battery: Add quirk for Asus
GL502VSK and UX305LA"), a previous fix for this which was reverted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The battery code does not use the dmi_system_id ident member, so there is
no need to initialize it. This saves us storing the unused strings as
as const data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-battery:
Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk"
ACPI: battery: do not export degraded capacity values over 100
ACPI: battery: make function __battery_hook_unregister() static
ACPI: battery: Add the ThinkPad "Not Charging" quirk
thinkpad_acpi: Add support for battery thresholds
power: add to_power_supply macro to the API
battery: Add the battery hooking API
* acpi-doc:
ACPI: sysfs: Update device object sysfs documentation
* acpi-pmic:
ACPI / PMIC: Replace license boilerplate with SPDX license identifier
|
|
Revert commit c68f0676ef7d ("ACPI / battery: Add quirk for Asus
GL502VSK and UX305LA") and commit 4446823e2573 ("ACPI / battery: Add
quirk for Asus UX360UA and UX410UAK").
On many many Asus products, the battery is sometimes reported as
charging or discharging even when it is full and you are on AC power.
This change quirked the kernel to avoid advertising the discharging
state when this happens on 4 laptop models, under the belief that
this was incorrect information. I presume it originates from user
reports who are confused that their battery status icon says that it
is discharging.
However, the reported information is indeed correct, and the quirk
approach taken is inadequate and more thought is needed first.
Specifically:
1. It only quirks discharging state, not charging
2. There are so many different Asus products and DMI naming variants
within those product families that behave this way; Linux could
grow to quirk hundreds of products and still not even be close at
"winning" this battle.
3. Asus previously clarified that this behaviour is intentional. The
platform will periodically do a partial discharge/charge cycle
when the battery is full, because this is one way to extend the
lifetime of the battery (leaving a battery at 100% charge and
unused will decrease its usable capacity over time).
My understanding is that any decent consumer product will have
this behaviour, but it appears that Asus is different in that
they expose this info through ACPI.
However, the behaviour seems correct. The ACPI spec does not
suggest in that the platform should hide the truth. It lets you
report that the battery is full of charge, and discharging, and
with external power connected; and Asus does this.
4. In terms of not confusing the user, this seems like something that
could/should be handled by userspace, which can also detect these
same (accurate) conditions in the general case.
Revert this quirk before it gets included in a release, while we look
for better approaches.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Revert commit 91eea70e5e5c (ACPI: battery: Add the ThinkPad "Not
Charging" quirk) as it is reported to cause user space to misbehave.
That appears to be due to bugs in user space, so this commit will go
in again after the bugs have been fixed and the fixes have been
delivered to users.
Link: https://marc.info/?l=linux-acpi&m=152089585129589&w=2
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With a degraded battery, full_charge_capacity can be less
than design_capacity, however it's not sure that capacity_now's
max will follow.
Example from an affected machine:
/sys/class/power_supply/BAT0/charge_full -> 4290000
/sys/class/power_supply/BAT0/charge_full_design -> 5900000
/sys/class/power_supply/BAT0/charge_now -> 5900000
/sys/class/power_supply/BAT0/capacity -> 137
The battery is a degraded one with a full charge, and
charge_now is the value of charge_full_design instead of
charge_full.
Added a new quirk to test and correct this, and
a new function to check if the battery is a degraded one
or not. This keeps the possibility to be over 100 if
it's really the case.
Signed-off-by: Laszlo Toth <laszlth@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The function __battery_hook_unregister is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
drivers/acpi/battery.c:654:6: warning: symbol '__battery_hook_unregister'
was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.
Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ognjen Galic <smclt30p@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This is a patch that implements a generic hooking API for the
generic ACPI battery driver.
With this new generic API, drivers can expose platform specific
behaviour via sysfs attributes in /sys/class/power_supply/BATn/
in a generic way.
A perfect example of the need for this API are Lenovo ThinkPads.
Lenovo ThinkPads have a ACPI extension that allows the setting of
start and stop charge thresholds in the EC and battery firmware
via ACPI. The thinkpad_acpi module can use this API to expose
sysfs attributes that it controls inside the ACPI battery driver
sysfs tree, under /sys/class/power_supply/BATN/.
The file drivers/acpi/battery.h has been moved to
include/acpi/battery.h and the includes inside ac.c, sbs.c, and
battery.c have been adjusted to reflect that.
When drivers hooks into the API, the API calls add_battery() for
each battery in the system that passes it a acpi_battery
struct. Then, the drivers can use device_create_file() to create
new sysfs attributes with that struct and identify the batteries
for per-battery attributes.
Signed-off-by: Ognjen Galic <smclt30p@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Same issue as other Asus laptops, ACPI incorrectly reports discharging
when battery is full and AC is plugged.
Use the same battery quirk can workaround the issue.
Link: https://bugs.launchpad.net/bugs/1661876
Link: https://bugs.launchpad.net/bugs/1745032
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On Asus GL502VSK and UX305LA, ACPI incorrectly reports discharging when
battery is full and AC is plugged.
However rate_now is correct under this circumstance, hence we can use
"rate_now == 0" as a predicate to report battery full status correctly.
Link: https://bugs.launchpad.net/bugs/1482390
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merging the two adjacent conditionally built blocks makes the code
a lot more readable. And as a bonus, we drop a duplicate test when
CONFIG_ACPI_PROCFS_POWER is undefined.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make these const as they are only passed as an argument to the function
device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled. However, to preserve the existing
behavior with respect to suspend-to-RAM, this only is done in
the suspend-to-idle case and only if an SCI has occurred while
suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* intel_pstate:
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
* pm-sleep:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
|
|
Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.
That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.
The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-domains:
PM / Domains: Add DT file to MAINTAINERS
PM / Domains: Fix DT example
* pm-cpuidle:
x86/intel_idle: add Gemini Lake support
cpuidle: check dev before usage in cpuidle_use_deepest_state()
* pm-sleep:
ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
PM / wakeup: Integrate mechanism to abort transitions in progress
* powercap:
powercap: intel_rapl: Add support for Gemini Lake
|
|
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled (that also helps to catch device-induced
wakeup events occurring during suspend transitions in progress).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some systems we have a native PMIC driver which provides battery
monitoring, while the ACPI battery driver is broken on these systems
due to bad DSDTs or because we do not support the proprietary and
undocumented ACPI opregions these ACPI battery devices rely on
(e.g. BMOP opregion).
This leads to there being 2 battery power_supply-s registed like this:
~$ acpi
Battery 0: Charging, 84%, 00:49:39 until charged
Battery 1: Unknown, 0%, rate information unavailable
Even if the ACPI battery where to function fine (which on systems
where we have a native PMIC driver it often doesn't) we still do not
want to export the same battery to userspace twice.
This commit adds a blacklist with PMIC ACPI HIDs for which we've a
native battery driver and makes the ACPI battery driver not register
itself when a PMIC on this list is present.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194811
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi_lock_battery_dir() / acpi_bus_register_driver() calls in
acpi_battery_init_async() may fail.
Check that they succeeded before undoing them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Lenovo Yoga 300 laptop's firmware advertises that it provides the _BIX
the method to retrieve battery information. Unfortunately (some versions
of?) the implementation return with an error.
[ 21.712228] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000010) is beyond end of object (length 0xD) (20160422/exoparg2-427)
[ 21.712244] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff95f8ff0b20f0), AE_AML_PACKAGE_LIMIT (20160422/psparse-542)
The _BIF method does succeed and returns convincing data. We detect _BIX
failing and automatically retry with _BIF.
Signed-off-by: Dave Lambley <linux@davel.me.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Thus move sysfs_add_battery() after acpi_battery_get_state(), which doesn't
require the power_supply. Prevents possible hanged tasks if
acpi_battery_get_state() fails consistently (and takes a long time in doing
so) when called inside acpi_battery_add().
In this situation the battery module first calls sysfs_add_battery(),
which creates a power_supply, which spawns an async
power_supply_deferred_register_work() task, which shall try to hold the
parent battery device mutex (being already held) so this register work
is set up after device initialization. If initialization takes long enough
the thread will be eventually run and try to hold the mutex before
acpi_battery_add() had the chance to finish.
Eventually the 5 retries in acpi_battery_update_retry() fail, the error
state is propagated, and results in sysfs_remove_battery() being called
within the error handling paths of acpi_battery_add(), and the power_supply
tear down too.
This triggers a cancel_delayed_work_sync() of the deferred_register_work
task, which ends up in schedule(). The end result is that the deferred
task is blocked trying to acquire the parent device mutex, which is not
released because the thread doing initialization (and failure handling)
went to sleep awaiting for the deferred task to be cancelled.
The hanged tasks look like this:
INFO: task kworker/u8:0:6 blocked for more than 120 seconds.
...
Call Trace:
[<ffffffff815daec5>] schedule+0x35/0x80
[<ffffffff815dda3c>] schedule_timeout+0x1ec/0x250
[<ffffffff810a0572>] ? check_preempt_curr+0x52/0x90
[<ffffffff810a05c9>] ? ttwu_do_wakeup+0x19/0xe0
[<ffffffff815db915>] wait_for_common+0xc5/0x190
[<ffffffff810a1500>] ? wake_up_q+0x70/0x70
[<ffffffff815db9fd>] wait_for_completion+0x1d/0x20
[<ffffffff8108ffb1>] flush_work+0x111/0x1c0
[<ffffffff8108dfe0>] ? flush_workqueue_prep_pwqs+0x1a0/0x1a0
[<ffffffff810909af>] __cancel_work_timer+0x9f/0x1d0
[<ffffffff81090b13>] cancel_delayed_work_sync+0x13/0x20
[<ffffffff8147ac67>] power_supply_unregister+0x37/0xc0
[<ffffffffa058b03d>] sysfs_remove_battery+0x3d/0x52 [battery]
[<ffffffffa058bf3a>] acpi_battery_add+0x112/0x181 [battery]
[<ffffffff81366db6>] acpi_device_probe+0x54/0x19b
[<ffffffff81427e9c>] driver_probe_device+0x22c/0x440
[<ffffffff81428181>] __driver_attach+0xd1/0xf0
[<ffffffff814280b0>] ? driver_probe_device+0x440/0x440
[<ffffffff8142591c>] bus_for_each_dev+0x6c/0xc0
[<ffffffff8142758e>] driver_attach+0x1e/0x20
[<ffffffff81426fc3>] bus_add_driver+0x1c3/0x280
[<ffffffff81428b00>] driver_register+0x60/0xe0
[<ffffffff81366c80>] acpi_bus_register_driver+0x3b/0x43
[<ffffffffa0591040>] acpi_battery_init_async+0x1c/0x1e [battery]
[<ffffffff81099268>] async_run_entry_fn+0x48/0x150
[<ffffffff81090d09>] process_one_work+0x1e9/0x440
[<ffffffff81090fab>] worker_thread+0x4b/0x4f0
[<ffffffff81090f60>] ? process_one_work+0x440/0x440
[<ffffffff81096b58>] kthread+0xd8/0xf0
[<ffffffff815de97f>] ret_from_fork+0x1f/0x40
[<ffffffff81096a80>] ? kthread_worker_fn+0x180/0x180
INFO: task kworker/u8:4:282 blocked for more than 120 seconds.
...
Call Trace:
[<ffffffff810ad745>] ? put_prev_entity+0x35/0x8b0
[<ffffffff815daec5>] schedule+0x35/0x80
[<ffffffff815db14e>] schedule_preempt_disabled+0xe/0x10
[<ffffffff815dc533>] __mutex_lock_slowpath+0xb3/0x120
[<ffffffff815dc5bf>] mutex_lock+0x1f/0x30
[<ffffffff8147a59b>] power_supply_deferred_register_work+0x2b/0x50
[<ffffffff81090d09>] process_one_work+0x1e9/0x440
[<ffffffff81090fab>] worker_thread+0x4b/0x4f0
[<ffffffff81090f60>] ? process_one_work+0x440/0x440
[<ffffffff81090f60>] ? process_one_work+0x440/0x440
[<ffffffff81096b58>] kthread+0xd8/0xf0
[<ffffffff815de97f>] ret_from_fork+0x1f/0x40
[<ffffffff81096a80>] ? kthread_worker_fn+0x180/0x180
Making sysfs_add_battery() the last operation here means that the
power_supply won't be created yet when the acpi_add_battery() failure
handling happens, the deferred task won't even spawn, and
sysfs_remove_battery will just skip over the NULL battery->bat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
async_synchronize_cookie() only serialises all tasks up to the specified
cookie, and importantly does not wait for the task corresponding with
the cookie. [This is so that it can be trivially used from inside the
async_func_t in order to serialise with all preceding tasks.] In order
to serialise with acpi_battery_init_async() we need to compensate and
pass in the next cookie instead.
The impact today is zero since performing an async_schedule() from inside
a module init function will trigger an async_synchronize_full() prior to
the module loader's completion. However, if the probe was moved to its
own unregistered async_domain, then the async_synchronize_cookie would
be replaced with an async_synchronize_full_domain.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The bat_dmi_table[] DMI table is referenced from the __init function
acpi_battery_init_async() only. It and its referenced functions can
therefore be marked __initconst to free up ~1kB of runtime memory after
initialization is done.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make the acpi_battery_units() function take a const argument and return
a const char*, too. Also make it static. It probably doesn't matter, as
gcc will be clever enough to optimize and inline the code even without
these hints. However, we also get rid of a #ifdef block by moving the
function closer to its usage location, so it's at least a small gain in
code readability.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The offset tables are only read, not modified. Make them const.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make sure that async function scheduled with async_schedule() has already
been executed.
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If ACPI is disabled there's no need to schedule an async function call,
the driver initialization can be aborted earlier in acpi_battery_init().
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over, although there are a few
items that sort of fall into the new feature category.
First off, we have new callbacks for PM domains that should help us to
handle some issues related to device initialization in a better way.
There also is some consolidation in the unified device properties API
area allowing us to use that inferface for accessing data coming from
platform initialization code in addition to firmware-provided data.
We have some new device/CPU IDs in a few drivers, support for new
chips and a new cpufreq driver too.
Specifics:
- Generic PM domains support update including new PM domain callbacks
to handle device initialization better (Russell King, Rafael J
Wysocki, Kevin Hilman)
- Unified device properties API update including a new mechanism for
accessing data provided by platform initialization code (Rafael J
Wysocki, Adrian Hunter)
- ARM cpuidle update including ARM32/ARM64 handling consolidation
(Daniel Lezcano)
- intel_idle update including support for the Silvermont Core in the
Baytrail SOC and for the Airmont Core in the Cherrytrail and
Braswell SOCs (Len Brown, Mathias Krause)
- New cpufreq driver for Hisilicon ACPU (Leo Yan)
- intel_pstate update including support for the Knights Landing chip
(Dasaratharaman Chandramouli, Kristen Carlson Accardi)
- QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)
- powernv cpufreq driver update (Shilpasri G Bhat)
- devfreq update including Tegra support changes (Tomeu Vizoso,
MyungJoo Ham, Chanwoo Choi)
- powercap RAPL (Running-Average Power Limit) driver update including
support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)
- ACPI device enumeration update related to the handling of the
special PRP0001 device ID allowing DT-style 'compatible' property
to be used for ACPI device identification (Rafael J Wysocki)
- ACPI EC driver update including limited _DEP support (Lan Tianyu,
Lv Zheng)
- ACPI backlight driver update including a new mechanism to allow
native backlight handling to be forced on non-Windows 8 systems and
a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)
- New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)
- Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)
- Fixes related to suspend-to-idle for the iTCO watchdog driver and
the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)
- PM tracing support for the suspend phase of system suspend/resume
transitions (Zhonghui Fu)
- Configurable delay for the system suspend/resume testing facility
(Brian Norris)
- PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"
* tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
ACPI / scan: Rework modalias creation when "compatible" is present
intel_idle: mark cpu id array as __initconst
powercap / RAPL: mark rapl_ids array as __initconst
powercap / RAPL: add ID for Broadwell server
intel_pstate: Knights Landing support
intel_pstate: remove MSR test
cpufreq: fix qoriq uniprocessor build
ACPI / scan: Take the PRP0001 position in the list of IDs into account
ACPI / scan: Simplify acpi_match_device()
ACPI / scan: Generalize of_compatible matching
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
PM / watchdog: iTCO: stop watchdog during system suspend
cpufreq: hisilicon: add acpu driver
ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
cpufreq: powernv: Report cpu frequency throttling
intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
intel_idle: Update support for Silvermont Core in Baytrail SOC
PM / devfreq: tegra: Register governor on module init
...
|
|
Commit 297d716f6260 ("power_supply: Change ownership from driver to
core") inverted the logic in battery_notify(). As an effect already
present battery was re-added on each system suspend or hibernation.
WARNING: CPU: 0 PID: 303 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0A:00/power_supply/BAT0'
CPU: 0 PID: 303 Comm: rtcwake Not tainted 4.0.0-ARCH-02621-g07e6253af953 #48
Call Trace:
sysfs_create_dir_ns+0x8d/0xa0
kobject_add_internal+0xb6/0x370
kobject_add+0x6f/0xd0
device_add+0x120/0x6c0
__power_supply_register+0x145/0x290
power_supply_register_no_ws+0x10/0x20
sysfs_add_battery+0x84/0xc5 [battery]
battery_notify+0x45/0x6b [battery]
notifier_call_chain+0x4f/0x80
__blocking_notifier_call_chain+0x4b/0x70
blocking_notifier_call_chain+0x16/0x20
pm_notifier_call_chain+0x1a/0x40
pm_suspend+0x3ed/0x4e0
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change the ownership of power_supply structure from each driver
implementing the class to the power supply core.
The patch changes power_supply_register() function thus all drivers
implementing power supply class are adjusted.
Each driver provides the implementation of power supply. However it
should not be the owner of power supply class instance because it is
exposed by core to other subsystems with power_supply_get_by_name().
These other subsystems have no knowledge when the driver will unregister
the power supply. This leads to several issues when driver is unbound -
mostly because user of power supply accesses freed memory.
Instead let the core own the instance of struct 'power_supply'. Other
users of this power supply will still access valid memory because it
will be freed when device reference count reaches 0. Currently this
means "it will leak" but power_supply_put() call in next patches will
solve it.
This solves invalid memory references in following race condition
scenario:
Thread 1: charger manager
Thread 2: power supply driver, used by charger manager
THREAD 1 (charger manager) THREAD 2 (power supply driver)
========================== ==============================
psy = power_supply_get_by_name()
Driver unbind, .remove
power_supply_unregister()
Device fully removed
psy->get_property()
The 'get_property' call is executed in invalid context because the driver was
unbound and struct 'power_supply' memory was freed.
This could be observed easily with charger manager driver (here compiled
with max17040 fuel gauge):
$ cat /sys/devices/virtual/power_supply/cm-battery/capacity &
$ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind
[ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 55.732584] pgd = d98d4000
[ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000
[ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[ 55.746210] Modules linked in:
[ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496
[ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000
[ 55.771647] PC is at 0x0
[ 55.774182] LR is at charger_get_property+0x2f4/0x36c
[ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013
[ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000
[ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68
[ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000
[ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68
[ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015
[ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210)
[ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000)
[ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8
[ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4
[ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80
[ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001
[ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000
[ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000
[ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124
[ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550
[ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364
[ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c
[ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000
[ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000
[ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c)
[ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48)
[ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104)
[ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28)
[ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484)
[ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c)
[ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100)
[ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c)
[ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48)
[ 56.000626] Code: bad PC value
[ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]---
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[for the nvec part]
Reviewed-by: Marc Dietrich <marvin24@gmx.de>
[for compal-laptop.c]
Acked-by: Darren Hart <dvhart@linux.intel.com>
[for the mfd part]
Acked-by: Lee Jones <lee.jones@linaro.org>
[for the hid part]
Acked-by: Jiri Kosina <jkosina@suse.cz>
[for the acpi part]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
|
|
Add new structure 'power_supply_config' for holding run-time
initialization data like of_node, supplies and private driver data.
The power_supply_register() function is changed so all power supply
drivers need updating.
When registering the power supply this new 'power_supply_config' should be
used instead of directly initializing 'struct power_supply'. This allows
changing the ownership of power_supply structure from driver to the
power supply core in next patches.
When a driver does not use of_node or supplies then it should use NULL
as config. If driver uses of_node or supplies then it should allocate
config on stack and initialize it with proper values.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
[for the nvec part]
Reviewed-by: Marc Dietrich <marvin24@gmx.de>
[for drivers/platform/x86/compal-laptop.c]
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
[for drivers/hid/*]
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
|
|
ACPI 5.0 introduces _DEP (Operation Region Dependencies) to designate
device objects that OSPM should assign a higher priority in start
ordering due to future operation region accesses.
On Asus T100TA, ACPI battery info are read from a I2C slave device via
I2C operation region. Before I2C operation region handler is installed,
battery _STA always returns 0. There is a _DEP method of designating
start order under battery device node.
This patch is to implement _DEP feature to fix battery issue on the
Asus T100TA. Introducing acpi_dep_list and adding dep_unmet count
in struct acpi_device. During ACPI namespace scan, create struct
acpi_dep_data for a valid pair of master (device pointed to by _DEP)/
slave(device with _DEP), record master's and slave's ACPI handle in
it and put it into acpi_dep_list. The dep_unmet count will increase
by one if there is a device under its _DEP. Driver's probe() should
return EPROBE_DEFER when find dep_unmet is larger than 0. When I2C
operation region handler is installed, remove all struct acpi_dep_data
on the acpi_dep_list whose master is pointed to I2C host controller
and decrease slave's dep_unmet. When dep_unmet decreases to 0, all
_DEP conditions are met and then do acpi_bus_attach() for the device
in order to resolve battery _STA issue on the Asus T100TA.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=69011
Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Adam Williamson <adamw@happyassassin.net>
Tested-by: Michael Shigorin <shigorin@gmail.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics
and a slightly buggy strncasecmp. The latter is the POSIX name, so
strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper
for the new strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in
the future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
