summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica
AgeCommit message (Collapse)Author
2021-06-07ACPICA: Add support for PlatformRtMechanism OperationRegion handlerErik Kaneda
ACPICA commit cdf48b141d7da38e47fe4020310033ddd1971f9e Writing a buffer to a PlatformRtMechanism FieldUnit invokes a bidirectional transaction. The input buffer contains 26 bytes containing 9 bytes of status, a command byte and a 16-byte UUID. This change will will simply pass this incoming buffer to a handler registered by the OS. Link: https://github.com/acpica/acpica/commit/cdf48b14 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07ACPICA: Use ACPI_FALLTHROUGHWei Ming Chen
ACPICA commit 2296edd39b4ce2d2dd691c1f309c4da00843ecc9 Replace /* FALLTHROUGH */ comment with ACPI_FALLTHROUGH Link: https://github.com/acpica/acpica/commit/2296edd3 Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-07ACPICA: Fix memory leak caused by _CID repair functionErik Kaneda
ACPICA commit 180cb53963aa876c782a6f52cc155d951b26051a According to the ACPI spec, _CID returns a package containing hardware ID's. Each element of an ASL package contains a reference count from the parent package as well as the element itself. Name (TEST, Package() { "String object" // this package element has a reference count of 2 }) A memory leak was caused in the _CID repair function because it did not decrement the reference count created by the package. Fix the memory leak by calling acpi_ut_remove_reference on _CID package elements that represent a hardware ID (_HID). Link: https://github.com/acpica/acpica/commit/180cb539 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-31ACPICA: Clean up context mutex during object deletionErik Kaneda
ACPICA commit bc43c878fd4ff27ba75b1d111b97ee90d4a82707 Fixes: c27f3d011b08 ("Fix race in GenericSerialBus (I2C) and GPIO OpRegion parameter handling") Link: https://github.com/acpica/acpica/commit/bc43c878 Reported-by: John Garry <john.garry@huawei.com> Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CSI2Bus resource templateBob Moore
This commit the result of squashing the following: ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c Link: https://github.com/acpica/acpica/commit/21a316fd Link: https://github.com/acpica/acpica/commit/f5506fc7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CXL ACPI device ID and _CBR objectErik Kaneda
ACPICA commit 7f634ac53fe1e480c01ceff7532cd8dc6430f1b9 The ACPI device ID represents the CXL host bridge. _CBR objects gets the memory location of CXL Host Bridge Registers. Link: https://github.com/acpica/acpica/commit/7f634ac5 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: Add new predefined objects _BPC, _BPS, and _BPTErik Kaneda
ACPICA commit 3cfef24ae2d98babbbfbe4ba612a2f5d9014d3ba The object definition for these can be found in the ACPI 6.4 specification. Link: https://github.com/acpica/acpica/commit/3cfef24a Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-24ACPICA: Always create namespace nodes using acpi_ns_create_node()Vegard Nossum
ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329 ACPI is allocating an object using kmalloc(), but then frees it using kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong and can lead to boot failures manifesting like this: hpet0: 3 comparators, 64-bit 100.000000 MHz counter clocksource: Switched to clocksource tsc-early BUG: unable to handle page fault for address: 000000003ffe0018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b 20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b 1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20 RSP: 0000:ffffc90000013df8 EFLAGS: 00010206 RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002 RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300 RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001 R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000 R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80 FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __trace_define_field+0x33/0xa0 event_trace_init+0xeb/0x2b4 tracer_init_tracefs+0x60/0x195 ? register_tracer+0x1e7/0x1e7 do_one_initcall+0x74/0x160 kernel_init_freeable+0x190/0x1f0 ? rest_init+0x9a/0x9a kernel_init+0x5/0xf6 ret_from_fork+0x35/0x40 CR2: 000000003ffe0018 ---[ end trace 707efa023f2ee960 ]--- RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Bisection leads to unrelated changes in slab; Vlastimil Babka suggests an unrelated layout or slab merge change merely exposed the underlying bug. Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/ Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com Link: https://github.com/acpica/acpica/commit/29da9a2a Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace") Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Diagnosed-by: Vlastimil Babka <vbabka@suse.cz> Diagnosed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Remove some code duplication from acpi_ev_address_space_dispatchHans de Goede
ACPICA commit 383f50ff8cb7424ca16a6c0234f103b41d4a783e The handling of the space_id == ACPI_ADR_SPACE_GSBUS and space_id == ACPI_ADR_SPACE_GPIO cases is almost identical, fold the 2 cases into 1 to remove some code duplication. Link: https://github.com/acpica/acpica/commit/383f50ff Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter ↵Hans de Goede
handling ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61 The handling of the generic_serial_bus (I2C) and GPIO op_regions in acpi_ev_address_space_dispatch() passes a number of extra parameters to the address-space handler through the address-space Context pointer (instead of using more function parameters). The Context is shared between threads, so if multiple threads try to call the handler for the same address-space at the same time, then a second thread could change the parameters of a first thread while the handler is running for the first thread. An example of this race hitting is the Lenovo Yoga Tablet2 1015L, where there are both attrib_bytes accesses and attrib_byte accesses to the same address-space. The attrib_bytes access stores the number of bytes to transfer in Context->access_length. Where as for the attrib_byte access the number of bytes to transfer is always 1 and field_obj->Field.access_length is unused (so 0). Both types of accesses racing from different threads leads to the following problem: 1. Thread a. starts an attrib_bytes access, stores a non 0 value from field_obj->Field.access_length in Context->access_length 2. Thread b. starts an attrib_byte access, stores 0 in Context->access_length 3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE and calls acpi_gsb_i2c_read_bytes(..., Context->access_length) 4. At this point Context->access_length is 0 (set by thread b.) rather then the field_obj->Field.access_length value from thread a. This 0 length reads leads to the following errors being logged: i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read) i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95 Note this is just an example of the problems which this race can cause. There are likely many more (sporadic) problems caused by this race. This commit adds a new context_mutex to struct acpi_object_addr_handler and makes acpi_ev_address_space_dispatch() take that mutex when using the shared Context to pass extra parameters to an address-space handler, fixing this race. Note the new mutex must be taken *after* exiting the interpreter, therefor the existing acpi_ex_exit_interpreter() call is moved to above the code which stores the extra parameters in the Context. Link: https://github.com/acpica/acpica/commit/c9e01169 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-10Merge back ACPICA material for v5.12.Rafael J. Wysocki
2021-02-08Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"Ard Biesheuvel
This reverts commit 32cf1a12cad43358e47dac8014379c2f33dfbed4. The 'exisitng buffer' in this case is the firmware provided table, and we should not modify that in place. This fixes a crash on arm64 with initrd table overrides, in which case the DSDT is not mapped with read/write permissions. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: Updated all copyrights to 2021Bob Moore
This affects all ACPICA source code modules. ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4 Link: https://github.com/acpica/acpica/commit/c570953c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: add type casts for string functionsBob Moore
Detected by gcc 10.2.0. ACPICA commit 608559800e1ad48b819744aeb1866d94335e2655 Link: https://github.com/acpica/acpica/commit/60855980 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: fix -WfallthroughNick Desaulniers
ACPICA commit 4b9135f5774caa796ddf826448811e8e7f08ef2f GCC 7.1 gained -Wimplicit-fallthrough to warn on implicit fallthrough, as well as __attribute__((__fallthrough__)) and comments to explicitly denote that cases of fallthrough were intentional. Clang also supports this warning and statement attribute, but not the comment form. Robert Moore provides additional context about the lint comments being removed. They were for "an old version of PC-Lint, which we don't use anymore." Drop those. This will help us enable -Wimplicit-fallthrough throughout the Linux kernel. Suggested-by: Robert Moore <robert.moore@intel.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Link: https://github.com/acpica/acpica/commit/4b9135f5 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-18ACPICA: Clean up exception code class checksMaximilian Luz
ACPICA commit 5a8390fbd4c5c60da0b6d4ba53b5ee34fda9a0cb With the exception code class check macros fixed in the previous commit, let us now use those to simplify exception class checks across ACPICA. Link: https://github.com/acpica/acpica/commit/5a8390fb Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Interpreter: fix memory leak by using existing bufferErik Kaneda
ACPICA commit 52d1da5dcbd79a722b70f02a1a83f04088f51ff6 There was a memory leak that ocurred when a _CID object is defined as a package containing string objects. When _CID is checked for any possible repairs, it calls a helper function to repair _HID (because _CID basically contains multiple _HID entries). The _HID repair function assumes that string objects are standalone objects that are not contained inside of any packages. The _HID repair function replaces the string object with a brand new object and attempts to delete the old object by decrementing the reference count of the old object. Strings inside of packages have a reference count of 2 so the _HID repair function leaves this object in a dangling state and causes a memory leak. Instead of allocating a brand new object and removing the old object, use the existing object when repairing the _HID object. Link: https://github.com/acpica/acpica/commit/52d1da5d Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Add function trace macros to improve debuggingErik Kaneda
ACPICA commit 87b8dba05b4cf8c111948327023c710e2b6b5a05 The namespace repair mechanism does not have function tracing macros. Add several trace macros to improve debuggability. Link: https://github.com/acpica/acpica/commit/87b8dba0 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Also handle "orphan" _REG methods for GPIO OpRegionsHans de Goede
ACPICA commit b9dc31e2fc67cf196fab5253a9a673bee68b2ef5 Before this commit acpi_ev_execute_reg_methods() had special handling to handle "orphan" (no matching op_region declared) _REG methods for EC nodes. On Intel Cherry Trail devices there are 2 possible ACPI op_regions for accessing GPIOs. The standard general_purpose_io op_region and the Cherry Trail specific user_defined 0x9X op_regions. Having 2 different types of op_regions leads to potential issues with checks for op_region availability, or in other words checks if _REG has been called for the op_region which the ACPI code wants to use. Except for the "orphan" EC handling, ACPICA core does not call _REG on an ACPI node which does not define an op_region matching the type being registered; and the reference design DSDT, from which most Cherry Trail DSDTs are derived, does not define general_purpose_io, nor user_defined(0x93) op_regions for the GPO2 (UID 3) device, because no pins were assigned ACPI controlled functions in the reference design. Together this leads to the perfect storm, at least on the Cherry Trail based Medion Akayo E1239T. This design does use a GPO2 pin from its ACPI code and has added the Cherry Trail specific user_defined(0x93) opregion to its GPO2 ACPI node to access this pin. But it uses a has _REG been called availability check for the standard general_purpose_io op_region. This clearly is a bug in the DSDT, but this does work under Windows. This issue leads to the intel_vbtn driver reporting the device always being in tablet-mode at boot, even if it is in laptop mode. Which in turn causes userspace to ignore touchpad events. So iow this issues causes the touchpad to not work at boot. This commit fixes this by extending the "orphan" _REG method handling to also apply to GPIO address-space handlers. Note it seems that Windows always calls "orphan" _REG methods so me may want to consider dropping the space-id check and always do "orphan" _REG method handling. Link: https://github.com/acpica/acpica/commit/b9dc31e2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-01ACPICA: Remove extreaneous "the" in commentsColin Ian King
ACPICA commit f6eae3961bf39ad8beda70c001d1815780600e39 There are several ocurrances of "the the", remove the extraneous "the". Link: https://github.com/acpica/acpica/commit/f6eae396 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-19ACPICA: Add missing type casts in GPE register access codeRafael J. Wysocki
Type casts needed on 32-bit systems are missing in two places in the GPE register access code, so add them. Fixes: 7a8379eb41a4 ("ACPICA: Add support for using logical addresses of GPE blocks") Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08Merge back earlier ACPICA-related changes for 5.10.Rafael J. Wysocki
2020-10-08ACPICA: Remove unnecessary semicolonBob Moore
ACPICA commit 02ffcba2af123a891eefbaed4d37780ba1e36ccc Reported by: Zou Wei. Link: https://github.com/acpica/acpica/commit/02ffcba2 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08ACPICA: Debugger: Add a new command: "ALL <NameSeg>"Bob Moore
This command will execute/evaluate all objects with a match to the <NameSeg> argument. ACPICA commit a1a32ec054f067d1617067e2bafb0a27a8728e07 Link: https://github.com/acpica/acpica/commit/a1a32ec0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08ACPICA: iASL: Return exceptions for string-to-integer conversionsBob Moore
This allows iASL to generate errors by passing exceptions that may be encountered during string-to-integer conversions. The exceptions point out invalid hex, decimal, and octal integers. ACPICA commit e98b8c0a3d96fdabb167c0ef18a809b32ade3228 Link: https://github.com/acpica/acpica/commit/e98b8c0a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08ACPICA: Add predefined names found in the SMBus sepcificationBob Moore
Affects run-time (kernel) ACPICA, iASL, and acpi_help. The "SMBus Control Method Interface Specification, Version 1.0, December 10, 1999" containes predefined names: _SBA _SBI _SBR _SBT _SBW. This was done outside of the ACPI specification. This commit adds support for ACPICA to recognize these named objects as predefined named objects. ACPICA commit 2fe13bd7ba9f97d3bf25488bf1bb1b2329427093 Link: https://github.com/acpica/acpica/commit/2fe13bd7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-08ACPICA: Tree-wide: fix various typos and spelling mistakesColin Ian King
ACPICA commit 6648a6ac8410813bcfedb5c8345259dd155ea851 Fix spelling issues found using the codespell checker Link: https://github.com/acpica/acpica/commit/6648a6ac Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-11ACPICA: Add support for using logical addresses of GPE blocksRafael J. Wysocki
The logical address of every GPE block in system memory must be known before passing it to acpi_ev_initialize_gpe_block(), because memory cannot be mapped on the fly from an interrupt handler. Accordingly, the host OS must map every GPE block in system memory upfront and it can store the logical addresses of GPE blocks for future use. If these logical addresses were known to ACPICA, it could use them instead of the corresponding physical addresses of GPE block for GPE register accesses and the memory mapping lookups carried out by acpi_os_read_memory() and acpi_os_write_memory() on every attempt to access a GPE register would not be necessary any more. To allow that to happen, introduce the ACPI_GPE_USE_LOGICAL_ADDRESSES symbol to indicate whether or not the host OS wants ACPICA to use the logical addresses of GPE registers in system memory directly (which is the case if this symbol is defined). Moreover, conditional on whether ACPI_GPE_USE_LOGICAL_ADDRESSES is defined, introduce two new global variables for storing the logical addresses of the FADT GPE blocks 0 and 1, respectively, acpi_gbl_xgpe0_block_logical_address and acpi_gbl_xgpe1_block_logical_address, make acpi_ev_gpe_initialize() pass their values instead of the physical addresses of the GPE blocks in question to acpi_ev_create_gpe_block() and modify acpi_hw_gpe_read() and acpi_hw_gpe_write() to access memory directly via the addresses stored in the struct acpi_gpe_address objects, which are expected to be the logical addresses of GPE registers if ACPI_GPE_USE_LOGICAL_ADDRESSES is defined. With the above changes in place, a host OS wanting ACPICA to access GPE registers directly through their logical addresses needs to define the ACPI_GPE_USE_LOGICAL_ADDRESSES symbol and make sure that the logical addresses of the FADT GPE blocks 0 and 1 are stored in acpi_gbl_xgpe0_block_logical_address and acpi_gbl_xgpe1_block_logical_address, respectively, prior to calling acpi_ev_gpe_initialize(). [If such a host OS also uses acpi_install_gpe_block() to add non-FADT GPE register blocks located in system memory, it must pass their logical addresses instead of their physical addresses to this function.] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-04ACPICA: Introduce special struct type for GPE register addressesRafael J. Wysocki
Notice that the bit_width, bit_offset and access_width fields in struct acpi_generic_address are not used during GPE register accesses any more, so introduce a simplified address structure type, struct acpi_gpe_address, to represent addresses of GPE registers and use it instead of struct acpi_generic_address in struct acpi_gpe_register_info. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-04ACPICA: Introduce acpi_hw_gpe_read() and acpi_hw_gpe_write()Rafael J. Wysocki
Now that GPE blocks are validated at the initialization time, accesses to GPE registers can be made more straightforward by ommitting all of the redundant checks in acpi_hw_read() and acpi_hw_write() and only invoking the OS-provided helper for the given type of access (read or write) and the address space holding these registers. For this reason, introduce simplified routines for accessing GPE registers, acpi_hw_gpe_read() and acpi_hw_gpe_write(), designed in accordance with the above observation, and modify all of the code accessing GPE registers to use them instead of acpi_hw_read() and acpi_hw_write(), respectively. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-04ACPICA: Validate GPE blocks at init timeRafael J. Wysocki
Some of the checks done by acpi_hw_read() and acpi_hw_write(), which are used for accessing GPE registers, are redundant in the specific case of GPE registers and the ones that are not redundant can be done upfront at the initialization time so as to fail the initialization if they are not passed instead of failing every access to the affected GPE registers going forward (including accesses from the SCI interrupt handler). Modify the GPE blocks initialization code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-03Merge branches 'acpi-mm', 'acpi-tables', 'acpi-apei' and 'acpi-misc'Rafael J. Wysocki
* acpi-mm: ACPI: OSL: Clean up the removal of unused memory mappings ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem() ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address() ACPICA: Preserve memory opregion mappings ACPI: OSL: Implement deferred unmapping of ACPI memory * acpi-tables: ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check ACPI: NUMA: Remove the useless sub table pointer check ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array() ACPI: tables: avoid relocations for table signature array * acpi-apei: ACPI: APEI: remove redundant assignment to variable rc * acpi-misc: ACPI: Replace HTTP links with HTTPS ones ACPI: Use valid link to the ACPI specification ACPI: Use fallthrough pseudo-keyword
2020-07-27ACPICA: Do not increment operation_region reference counts for field unitsErik Kaneda
ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70 Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects. Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region. This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object. Link: https://github.com/acpica/acpica/commit/e17b28cf Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Replace one-element array with flexible-arrayGustavo A. R. Silva
ACPICA commit 7ba2f3d91a32f104765961fda0ed78b884ae193d The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the linux codebase from now on. This issue was found with the help of Coccinelle and audited _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://github.com/acpica/acpica/commit/7ba2f3d9 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Preserve memory opregion mappingsRafael J. Wysocki
The ACPICA's strategy with respect to the handling of memory mappings associated with memory operation regions is to avoid mapping the entire region at once which may be problematic at least in principle (for example, it may lead to conflicts with overlapping mappings having different attributes created by drivers). It may also be wasteful, because memory opregions on some systems take up vast chunks of address space while the fields in those regions actually accessed by AML are sparsely distributed. For this reason, a one-page "window" is mapped for a given opregion on the first memory access through it and if that "window" does not cover an address range accessed through that opregion subsequently, it is unmapped and a new "window" is mapped to replace it. Next, if the new "window" is not sufficient to acess memory through the opregion in question in the future, it will be replaced with yet another "window" and so on. That may lead to a suboptimal sequence of memory mapping and unmapping operations, for example if two fields in one opregion separated from each other by a sufficiently wide chunk of unused address space are accessed in an alternating pattern. The situation may still be suboptimal if the deferred unmapping introduced previously is supported by the OS layer. For instance, the alternating memory access pattern mentioned above may produce a relatively long list of mappings to release with substantial duplication among the entries in it, which could be avoided if acpi_ex_system_memory_space_handler() did not release the mapping used by it previously as soon as the current access was not covered by it. In order to improve that, modify acpi_ex_system_memory_space_handler() to preserve all of the memory mappings created by it until the memory regions associated with them go away. Accordingly, update acpi_ev_system_memory_region_setup() to unmap all memory associated with memory opregions that go away. Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiang Li <xiang.z.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-05ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanismErik Kaneda
ACPICA commit 2c2eefa827bd37297f5f9ca4b263fcba829aaf3f Link: https://github.com/acpica/acpica/commit/2c2eefa8 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09ACPICA: Fix required parameters for _NIG and _NIHErik Kaneda
ACPICA commit 4b0e043386c7e698bea9e862f60a388647f56622 Previously, there was a mixup where _NIG required one parameter and _NIH required zero parameters. This changes swaps these parameter requirements. Now this change requires _NIH to be called with one parameter and _NIG requires zero. Link: https://github.com/acpica/acpica/commit/4b0e0433 Reported-by: Paul A Lohr <paul.a.lohr@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09ACPICA: Dispatcher: add status checksErik Kaneda
ACPICA commit 3244c1eeba9f9fb9ccedb875f7923a3d85e0c6aa The status chekcs are used to to avoid NULL pointer dereference on field objects Link: https://github.com/acpica/acpica/commit/3244c1ee Reported-by: Kurt Kennett <kurt_kennett@hotmail.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09ACPICA: Disassembler: ignore AE_ALREADY_EXISTS status when parsing create ↵Erik Kaneda
operators ACPICA commit cd66d0a50fdc9cc4dcd998e08e7aa3c4154bea2d Disassembler is intended to emit existing ASL code as-is. Therefore, error messages emitted during disassembly should be ignored or handled in a way such that the disassembler can continue to parse the AML. This change ignores AE_ALREADY_EXISTS errors during the deferred Op parsing for create operators in order to complete parsing ASL termlists. Link: https://github.com/acpica/acpica/commit/cd66d0a5 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09ACPICA: Move acpi_gbl_next_cmd_num definition to acglobal.hErik Kaneda
ACPICA commit 8296a24f33984c26a61103c590b049de3c9b61ff This commit cleans up the code by moving the global definition out of dbhistry.c to acglobal.h. Link: https://github.com/acpica/acpica/commit/8296a24f Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09ACPICA: Make acpi_protocol_lengths staticYue Haibing
ACPICA commit 0ebacf12b8ca66ce6d3fce4d349b3f2448da18cb A linux-based static analyzer (sparse) caught this as a warning. Making this variable static will result in better optimizations and ensure that this variable does not get used outside of this file. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> [ek: commit message] Link: https://github.com/acpica/acpica/commit/0ebacf12 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-06Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version 20200326 ACPICA: Fixes for acpiExec namespace init file ACPICA: Add NHLT table signature ACPICA: WSMT: Fix typo, no functional change ACPICA: utilities: fix sprintf() ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support ACPICA: Change PlatformCommChannel ASL keyword to PCC ACPICA: Fix IVRS IVHD type 10h reserved field name ACPICA: Implement IVRS IVHD type 11h parsing ACPICA: Fix a typo in a comment field
2020-03-30Merge tag 'acpi-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: - Update the ACPICA code in the kernel to the 20200214 upstream release including: * Fix to re-enable the sleep button after wakeup (Anchal Agarwal). * Fixes for mistakes in comments and typos (Bob Moore). * ASL-ASL+ converter updates (Erik Kaneda). * Type casting cleanups (Sven Barth). - Clean up the intialization of the EC driver and eliminate some dead code from it (Rafael Wysocki). - Clean up the quirk tables in the AC and battery drivers (Hans de Goede). - Fix the global lock handling on x86 to ignore unspecified bit positions in the global lock field (Jan Engelhardt). - Add a new "tiny" driver for ACPI button devices exposed by VMs to guest kernels to send signals directly to init (Josh Triplett). - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung). - Make the ACPI PCI host bridge and fan drivers use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Clean up assorted pieces of code: * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan). * Drop unneeded variable initialization (Colin Ian King). * Add missing __acquires/__releases annotations (Jules Irenge). * Replace list_for_each_safe() with list_for_each_entry_safe() (chenqiwu)" * tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits) ACPICA: Update version to 20200214 ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow ACPI: fan: Use scnprintf() for avoiding potential buffer overflow ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code acpi/x86: ignore unspecified bit positions in the ACPI global lock field acpi/x86: add a kernel parameter to disable ACPI BGRT x86/acpi: make "asmlinkage" part first thing in the function definition ACPI: list_for_each_safe() -> list_for_each_entry_safe() ACPI: video: remove redundant assignments to variable result ACPI: OSL: Add missing __acquires/__releases annotations ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() ...
2020-03-30Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200214 ACPICA: Fix a couple of typos ACPICA: use acpi_size instead of u32 for prefix_path_length ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32 ACPICA: cast the result of the pointer difference to u32 ACPICA: Table Manager: Update comments in a function header ACPICA: Enable sleep button on ACPI legacy wake ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events. ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30ACPICA: Fixes for acpiExec namespace init fileBob Moore
This is the result of squashing the following ACPICA commit ID's: 6803997e5b4f3635cea6610b51ff69e29d251de3 f31cdf8bfda22fe265c1a176d0e33d311c82a7f7 This change fixes several problems with the support for the acpi_exec namespace init file (-fi option). Specifically, it fixes AE_ALREADY_EXISTS errors, as well as various seg faults. Link: https://github.com/acpica/acpica/commit/f31cdf8b Link: https://github.com/acpica/acpica/commit/6803997e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: utilities: fix sprintf()John Levon
This contains changes for the following ACPICA commit ID's: 8f99a6ccd3b8e5c3d3d68c53fdbb054c2477eeb4 d30647af53abd334cbcf6362387464ea647bac9e d3c5fb4cf5b2880d789c987eb847fc3de3774abc On 32-bit, the provided sprintf() is non-functional: with a size of ACPI_UINT32_MAX, String + Size will wrap, meaning End < Start, and acpi_ut_bound_string_output() will never output anything as a result. The symptom we saw of this was acpixtract failing to output anything. Link: https://github.com/acpica/acpica/commit/8f99a6cc Link: https://github.com/acpica/acpica/commit/d30647af Link: https://github.com/acpica/acpica/commit/d3c5fb4c Signed-off-by: MSathieu <18145111+MSathieu@users.noreply.github.com> Signed-off-by: John Levon <john.levon@joyent.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_supportErik Kaneda
ACPICA commit 825c53661cacc7e3dab4844588201846143bd1b7 This variable was re-defined in a file specific to acpiexec. Remove the redundant declaration and move the initialize to the debugger. Patch based on suggestions by David Seifert and Benjamin Berg. Link: https://github.com/acpica/acpica/commit/825c5366 Reported-by: David Seifert <soap@gentoo.org> Reported-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: Change PlatformCommChannel ASL keyword to PCCErik Kaneda
ACPICA commit 811e69a59cb4189ebf8b882eba74c881f598a239 The former was proposed during specification discussions but it was dropped. This keyword was introduced to the ACPICA code base by mistake so this commit changes the keyword representing Platform Communication Channel to be PCC. Link: https://github.com/acpica/acpica/commit/811e69a5 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-25ACPICA: Allow acpi_any_gpe_status_set() to skip one GPERafael J. Wysocki
The check carried out by acpi_any_gpe_status_set() is not precise enough for the suspend-to-idle implementation in Linux and in some cases it is necessary make it skip one GPE (specifically, the EC GPE) from the check to prevent a race condition leading to a premature system resume from occurring. For this reason, redefine acpi_any_gpe_status_set() to take the number of a GPE to skip as an argument. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629 Tested-by: Ondřej Caletka <ondrej@caletka.cz> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-21ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()Rafael J. Wysocki
Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:38:20 +0000