Age | Commit message (Collapse) | Author |
|
When PAGE_SIZE is greater than 4kB, multiple stripes may share the same
page. Thus, src_offs is added to async_xor_offs() with array of offsets.
However, async_xor() passes NULL src_offs to async_xor_offs(). In such
case, src_offs should not be updated. Add a check before the update.
Fixes: ceaf2966ab08(async_xor: increase src_offs when dropping destination page)
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@linux.intel.com>
Tested-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@intel.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
|
Now we support sharing one page if PAGE_SIZE is not equal stripe size. To
support this, it needs to support calculating xor value with different
offsets for each r5dev. One offset array is used to record those offsets.
In RMW mode, parity page is used as a source page. It sets
ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5.
So it needs to add src_list and src_offs at the same time. Now it only
needs src_list. So the xor value which is calculated is wrong. It can
cause data corruption problem.
I can reproduce this problem 100% on a POWER8 machine. The steps are:
mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G
mkfs.xfs /dev/md0
mount /dev/md0 /mnt/test
mount: /mnt/test: mount(2) system call failed: Structure needs cleaning.
Fixes: 29bcff787a25 ("md/raid5: add new xor function to support different page offset")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
|
|
All 5 CAMELLIA crypto driver Kconfig symbols have a duplicate
"depends on CRYPTO" line but they are inside an
"if CRYPTO"/"endif # if CRYPTO" block, so drop the duplicate "depends"
lines.
These 5 symbols still depend on CRYPTO.
Fixes: 584fffc8b196 ("[CRYPTO] kconfig: Ordering cleanup")
Fixes: 0b95ec56ae19 ("crypto: camellia - add assembler implementation for x86_64")
Fixes: d9b1d2e7e10d ("crypto: camellia - add AES-NI/AVX/x86_64 assembler implementation of camellia cipher")
Fixes: f3f935a76aa0 ("crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher")
Fixes: c5aac2df6577 ("sparc64: Add DES driver making use of the new des opcodes.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix function name in chacha.c kernel-doc comment to remove a warning.
Convert af_alg.c to kernel-doc notation to eliminate many kernel-doc
warnings.
../lib/crypto/chacha.c:77: warning: expecting prototype for chacha_block(). Prototype was for chacha_block_generic() instead
chacha.c:104: warning: Excess function parameter 'out' description in 'hchacha_block_generic'
af_alg.c:498: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_tsgl'
../crypto/af_alg.c:539: warning: expecting prototype for aead_count_tsgl(). Prototype was for af_alg_count_tsgl() instead
../crypto/af_alg.c:596: warning: expecting prototype for aead_pull_tsgl(). Prototype was for af_alg_pull_tsgl() instead
af_alg.c:663: warning: Function parameter or member 'areq' not described in 'af_alg_free_areq_sgls'
af_alg.c:700: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_wmem'
af_alg.c:700: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_wmem'
af_alg.c:731: warning: Function parameter or member 'sk' not described in 'af_alg_wmem_wakeup'
af_alg.c:757: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'min' not described in 'af_alg_wait_for_data'
af_alg.c:796: warning: Function parameter or member 'sk' not described in 'af_alg_data_wakeup'
af_alg.c:832: warning: Function parameter or member 'sock' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'msg' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'size' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'ivsize' not described in 'af_alg_sendmsg'
af_alg.c:985: warning: Function parameter or member 'sock' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'page' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'offset' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'size' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'flags' not described in 'af_alg_sendpage'
af_alg.c:1040: warning: Function parameter or member 'areq' not described in 'af_alg_free_resources'
af_alg.c:1059: warning: Function parameter or member '_req' not described in 'af_alg_async_cb'
af_alg.c:1059: warning: Function parameter or member 'err' not described in 'af_alg_async_cb'
af_alg.c:1083: warning: Function parameter or member 'file' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'sock' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'wait' not described in 'af_alg_poll'
af_alg.c:1114: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_areq'
af_alg.c:1114: warning: Function parameter or member 'areqlen' not described in 'af_alg_alloc_areq'
af_alg.c:1146: warning: Function parameter or member 'sk' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'msg' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'flags' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'areq' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'maxsize' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'outlen' not described in 'af_alg_get_rsgl'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it.
This also removes a reference to http://www.xyratex.com which seems to be
down.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This function declaration has been added in 'ecc_curve.h',
delete it in 'crypto/ecc.h'.
Fixes: 4e6602916bc6(crypto: ecdsa - Add support for ECDSA ...)
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the 'do while(0)' loop in the macro, as it is not needed for single
statement macros. Condense into one line.
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the else because the if statement has a break statement. Fix the
checkpatch.pl warning.
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_stats_get() is a no-op when the kernel is compiled without
CONFIG_CRYPTO_STATS, so pairing it with crypto_alg_put() unconditionally
(as crypto_rng_reset() does) is wrong.
Fix this by moving the call to crypto_stats_get() to just before the
actual algorithm operation which might need it. This makes it always
paired with crypto_stats_rng_seed().
Fixes: eed74b3eba9e ("crypto: rng - Fix a refcounting bug in crypto_rng_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove repeated word 'bit' in comments.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes the following checkpatch.pl warnings:
crypto/jitterentropy.c:600: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:681: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:772: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:829: WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This pulls in the NIST P384/256/192 x509 changes.
|
|
Prepare the x509 parser to accept NIST P384 certificates and add the
OID for ansip384r1, which is the identifier for NIST P384.
Summary of changes:
* crypto/asymmetric_keys/x509_cert_parser.c
- prepare x509 parser to load NIST P384
* include/linux/oid_registry.h
- add OID_ansip384r1
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for parsing of x509 certificates that contain ECDSA keys,
such as NIST P256, that have been signed by a CA using any of the
current SHA hash algorithms.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.
Summary of changes:
* crypto/ecdsa.c
- add ecdsa_nist_p384_init_tfm
- register and unregister P384 tfm
* crypto/testmgr.c
- add test vector for P384 on vector of tests
* crypto/testmgr.h
- add test vector params for P384(sha1, sha224, sha256, sha384
and sha512)
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the math needed for NIST P384 and adapt certain functions'
parameters so that the ecc_curve is passed to vli_mmod_fast. This
allows to identify the curve by its name prefix and the appropriate
function for fast mmod calculation can be used.
Summary of changes:
* crypto/ecc.c
- add vli_mmod_fast_384
- change some routines to pass ecc_curve forward until vli_mmod_fast
* crypto/ecc.h
- add ECC_CURVE_NIST_P384_DIGITS
- change ECC_MAX_DIGITS to P384 size
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the parameters for the NIST P384 curve and define a new curve ID
for it. Make the curve available in ecc_get_curve.
Summary of changes:
* crypto/ecc_curve_defs.h
- add nist_p384 params
* include/crypto/ecdh.h
- add ECC_CURVE_NIST_P384
* crypto/ecc.c
- change ecc_get_curve to accept nist_p384
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes missing prototype warnings in crypto/aegis128-neon.c.
Fixes: a4397635afea ("crypto: aegis128 - provide a SIMD...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. Add curve 25519 parameters in 'crypto/ecc_curve_defs.h';
2. Add curve25519 interface 'ecc_get_curve25519_param' in
'include/crypto/ecc_curve.h', to make its parameters be
exposed to everyone in kernel tree.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move 'ecc_get_curve' to 'include/crypto/ecc_curve.h', so everyone
in kernel tree can easily get ecc curve params;
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. crypto and crypto/atmel-ecc:
Move curve id of ECDH from the key into the algorithm name instead
in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Given that crypto_alloc_tfm() may return ERR pointers, and to avoid
crashes on obscure error paths where such pointers are presented to
crypto_destroy_tfm() (such as [0]), add an ERR_PTR check there
before dereferencing the second argument as a struct crypto_tfm
pointer.
[0] https://lore.kernel.org/linux-crypto/000000000000de949705bc59e0f6@google.com/
Reported-by: syzbot+12cf5fbfdeba210a89dd@syzkaller.appspotmail.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Delete sg_data function, because sg_data function definition same as
sg_virt(), so need to delete it and use sg_virt() replace to sg_data().
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes the byte order markings in serpent.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # arm64 big-endian
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring updates from David Howells:
"Here's a set of minor keyrings fixes/cleanups that I've collected from
various people for the upcoming merge window.
A couple of them might, in theory, be visible to userspace:
- Make blacklist_vet_description() reject uppercase letters as they
don't match the all-lowercase hex string generated for a blacklist
search.
This may want reconsideration in the future, but, currently, you
can't add to the blacklist keyring from userspace and the only
source of blacklist keys generates lowercase descriptions.
- Fix blacklist_init() to use a new KEY_ALLOC_* flag to indicate that
it wants KEY_FLAG_KEEP to be set rather than passing KEY_FLAG_KEEP
into keyring_alloc() as KEY_FLAG_KEEP isn't a valid alloc flag.
This isn't currently a problem as the blacklist keyring isn't
currently writable by userspace.
The rest of the patches are cleanups and I don't think they should
have any visible effect"
* tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
watch_queue: rectify kernel-doc for init_watch()
certs: Replace K{U,G}IDT_INIT() with GLOBAL_ROOT_{U,G}ID
certs: Fix blacklist flag type confusion
PKCS#7: Fix missing include
certs: Fix blacklisted hexadecimal hash string check
certs/blacklist: fix kernel doc interface issue
crypto: public_key: Remove redundant header file from public_key.h
keys: remove trailing semicolon in macro definition
crypto: pkcs7: Use match_string() helper to simplify the code
PKCS#7: drop function from kernel-doc pkcs7_validate_trust_one
encrypted-keys: Replace HTTP links with HTTPS ones
crypto: asymmetric_keys: fix some comments in pkcs7_parser.h
KEYS: remove redundant memset
security: keys: delete repeated words in comments
KEYS: asymmetric: Fix kerneldoc
security/keys: use kvfree_sensitive()
watch_queue: Drop references to /dev/watch_queue
keys: Remove outdated __user annotations
security: keys: Fix fall-through warnings for Clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Restrict crypto_cipher to internal API users only.
Algorithms:
- Add x86 aesni acceleration for cts.
- Improve x86 aesni acceleration for xts.
- Remove x86 acceleration of some uncommon algorithms.
- Remove RIPE-MD, Tiger and Salsa20.
- Remove tnepres.
- Add ARM acceleration for BLAKE2s and BLAKE2b.
Drivers:
- Add Keem Bay OCS HCU driver.
- Add Marvell OcteonTX2 CPT PF driver.
- Remove PicoXcell driver.
- Remove mediatek driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (154 commits)
hwrng: timeriomem - Use device-managed registration API
crypto: hisilicon/qm - fix printing format issue
crypto: hisilicon/qm - do not reset hardware when CE happens
crypto: hisilicon/qm - update irqflag
crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'
crypto: hisilicon/qm - fix request missing error
crypto: hisilicon/qm - removing driver after reset
crypto: octeontx2 - fix -Wpointer-bool-conversion warning
crypto: hisilicon/hpre - enable Elliptic curve cryptography
crypto: hisilicon - PASID fixed on Kunpeng 930
crypto: hisilicon/qm - fix use of 'dma_map_single'
crypto: hisilicon/hpre - tiny fix
crypto: hisilicon/hpre - adapt the number of clusters
crypto: cpt - remove casting dma_alloc_coherent
crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generation
crypto: xor - Fix typo of optimization
hwrng: optee - Use device-managed registration API
crypto: arm64/crc-t10dif - move NEON yield to C code
crypto: arm64/aes-ce-mac - simplify NEON yield
crypto: arm64/aes-neonbs - remove NEON yield calls
...
|
|
Add the bit of information that makes
restrict_link_by_key_or_keyring_chain different from
restrict_link_by_key_or_keyring to the inline docs comment.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
s/optimzation/optimization/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.
Add a check to prevent that.
Fixes: 3c4b23901a0c7 ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Twofish input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The fcrypt implementation uses memcpy() to access the input and output
buffers so there is no need to set an alignmask.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
CAST6 input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
CAST5 input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Camellia input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of
the Blowfish input and output blocks, which propagates to mode drivers,
and results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using an alignmask of 0x3 to ensure 32-bit alignment of the
Serpent input and output blocks, which propagates to mode drivers, and
results in pointless copying on architectures that don't care about
alignment, use the unaligned accessors, which will do the right thing on
each respective architecture, avoiding the need for double buffering.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.
In other words, nobody is likely to care anymore today, so let's get rid
of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Michael MIC driver uses the cra_alignmask to ensure that pointers
presented to its update and finup/final methods are 32-bit aligned.
However, due to the way the shash API works, this is no guarantee that
the 32-bit reads occurring in the update method are also aligned, as the
size of the buffer presented to update may be of uneven length. For
instance, an update() of 3 bytes followed by a misaligned update() of 4
or more bytes will result in a misaligned access using an accessor that
is not suitable for this.
On most architectures, this does not matter, and so setting the
cra_alignmask is pointless. On architectures where this does matter,
setting the cra_alignmask does not actually solve the problem.
So let's get rid of the cra_alignmask, and use unaligned accessors
instead, where appropriate.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
match_string() returns the array index of a matching string.
Use it instead of the open-coded implementation.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
|
|
The function is a static function, so no needs add into kernel-doc. and
we could avoid warning:
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'pkcs7' not described in 'pkcs7_validate_trust_one'
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'sinfo' not described in 'pkcs7_validate_trust_one'
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'trust_keyring' not described in 'pkcs7_validate_trust_one'
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|