| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds rfc4106 test vectors sourced from
draft-mcgrew-gcm-test-01.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit 9b9f9296a7b73fbafe0a0a6f2494eaadd97f9f73 as
all in-kernel implementations of GCM have been converted to the
new AEAD interface, meaning that they should now pass the updated
rfc4543 test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch updates the rfc4543 test vectors to the new format
where the IV is part of the AD. For now these vectors are still
unused. They will be reactivated once all rfc4543 implementations
have migrated.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts generic gcm and its associated transforms to
the new AEAD interface. The biggest reward is in code reduction
for rfc4543 where it used to do IV stitching which is no longer
needed as the IV is already part of the AD on input.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Because the old rfc4543 implementation always injected an IV into
the AD, while the new one does not, we have to disable the test
while it is converted over to the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This driver builds off of the tristate CONFIG_PKCS7_TEST_KEY and calls
module_init and module_exit. So it should explicitly include module.h
to avoid compile breakage during header shuffles done in the future.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
The hash-based DRBG variants all use sha256 so we need to add a
select on it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Be more verbose and also report ->backend_cra_name when
crypto_alloc_shash() or crypto_alloc_cipher() fail in
drbg_init_hash_kernel() or drbg_init_sym_kernel()
correspondingly.
Example
DRBG: could not allocate digest TFM handle: hmac(sha256)
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As required by SP800-90A, the DRBG implements are reseeding threshold.
This threshold is at 2**48 (64 bit) and 2**32 bit (32 bit) as
implemented in drbg_max_requests.
With the recently introduced changes, the DRBG is now always used as a
stdrng which is initialized very early in the boot cycle. To ensure that
sufficient entropy is present, the Jitter RNG is added to even provide
entropy at early boot time.
However, the 2nd seed source, the nonblocking pool, is usually
degraded at that time. Therefore, the DRBG is seeded with the Jitter RNG
(which I believe contains good entropy, which however is questioned by
others) and is seeded with a degradded nonblocking pool. This seed is
now used for quasi the lifetime of the system (2**48 requests is a lot).
The patch now changes the reseed threshold as follows: up until the time
the DRBG obtains a seed from a fully iniitialized nonblocking pool, the
reseeding threshold is lowered such that the DRBG is forced to reseed
itself resonably often. Once it obtains the seed from a fully
initialized nonblocking pool, the reseed threshold is set to the value
required by SP800-90A.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The get_blocking_random_bytes API is broken because the wait can
be arbitrarily long (potentially forever) so there is no safe way
of calling it from within the kernel.
This patch replaces it with the new callback API which does not
have this problem.
The patch also removes the entropy buffer registered with the DRBG
handle in favor of stack variables to hold the seed data.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the global -O0 compiler flag from the Makefile with GCC
pragmas to mark only the functions required to be compiled without
optimizations.
This patch also adds a comment describing the rationale for the
functions chosen to be compiled without optimizations.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes krng so that DRBG can take its place.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT
that simply selects the DRBG. This new option is then selected
by the IV generators.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As this is required by many IPsec algorithms, let's set the default
to m.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the stdrng module alias and increases the priority
to ensure that it is loaded in preference to other RNGs.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We currently do the IV seeding on the first givencrypt call in
order to conserve entropy. However, this does not work with
DRBG which cannot be called from interrupt context. In fact,
with DRBG we don't need to conserve entropy anyway. So this
patch moves the seeding into the init function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We currently do the IV seeding on the first givencrypt call in
order to conserve entropy. However, this does not work with
DRBG which cannot be called from interrupt context. In fact,
with DRBG we don't need to conserve entropy anyway. So this
patch moves the seeding into the init function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We currently do the IV seeding on the first givencrypt call in
order to conserve entropy. However, this does not work with
DRBG which cannot be called from interrupt context. In fact,
with DRBG we don't need to conserve entropy anyway. So this
patch moves the seeding into the init function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We currently do the IV seeding on the first givencrypt call in
order to conserve entropy. However, this does not work with
DRBG which cannot be called from interrupt context. In fact,
with DRBG we don't need to conserve entropy anyway. So this
patch moves the seeding into the init function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
draft-ietf-ipsecme-chacha20-poly1305 defines the use of ChaCha20/Poly1305 in
ESP. It uses additional four byte key material as a salt, which is then used
with an 8 byte IV to form the ChaCha20 nonce as defined in the RFC7539.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the
ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and
asynchronous operations, even if we currently have no async chacha20 or poly1305
drivers.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Poly1305 is a fast message authenticator designed by Daniel J. Bernstein.
It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305
AEAD for use in IETF protocols.
This is a portable C implementation of the algorithm without architecture
specific optimizations, based on public domain code by Daniel J. Bernstein and
Andrew Moon.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We explicitly set the Initial block Counter by prepending it to the nonce in
Little Endian. The same test vector is used for both encryption and decryption,
ChaCha20 is a cipher XORing a keystream.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by
Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF
protocols as a building block for the ChaCha20-Poly1305 AEAD.
This is a portable C implementation without any architecture specific
optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce
prepended by the initial block counter. Some algorithms require an explicit
counter value, for example the mentioned AEAD construction.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On architectures where flush_dcache_page is not needed, we will
end up generating all the code up to the PageSlab call. This is
because PageSlab operates on a volatile pointer and thus cannot
be optimised away.
This patch works around this by checking whether flush_dcache_page
is needed before we call PageSlab which then allows PageSlab to be
compiled awy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts cryptd to the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds setkey and setauthsize for cryptd AEAD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts pcrypt over to the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the helpers that allow the registration and removal
of multiple algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
No new code should be using the return value of crypto_unregister_alg
as it will become void soon.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch ensures that the tfm context always has enough extra
memory to ensure that it is aligned according to cra_alignment.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As it stands the only non-type safe functions left in the new
AEAD interface are the cra_init/cra_exit functions. It means
exposing the ugly __crypto_aead_cast to every AEAD implementor.
This patch adds type-safe init/exit functions to AEAD. Existing
algorithms are unaffected while new implementations can simply
fill in these two instead of cra_init/cra_exit.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit f858c7bcca8c20761a20593439fe998b4b67e86b as
the algif_aead interface has been switched over to the new AEAD
interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Conflicts:
drivers/net/phy/amd-xgbe-phy.c
drivers/net/wireless/iwlwifi/Kconfig
include/net/mac80211.h
iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.
The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch removes the use of timekeeping_valid_for_hres which is now
marked as internal for the time keeping subsystem. The jitterentropy
does not really require this verification as a coarse timer (when
random_get_entropy is absent) is discovered by the initialization test
of jent_entropy_init, which would cause the jitter rng to not load in
that case.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Note that the user-space interface now requires both input and
output to be of the same length, and both must include space for
the AD as well as the authentication tag.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On module unload we weren't unregistering the seqniv template,
thus leading to a crash the next time someone walks the template
list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a bug in the context size calculation where we
were still referring to the old cra_aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes use of the new common IV generation code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As the AD does not necessarily exist in the destination buffer
it must be copied along with the plain/cipher text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a bug in the context size calculation where we
were still referring to the old cra_aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes use of the new common IV generation code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As the AD does not necessarily exist in the destination buffer
it must be copied along with the plain text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds some common IV generation code currently duplicated
by seqiv and echainiv. For example, the setkey and setauthsize
functions are completely identical.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
