Age | Commit message (Collapse) | Author |
|
Set the module licence to prevent the kernel from being tainted if loaded
as a module.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
|
|
public_key_verify_signature() is starting an async crypto op and
waiting for it to complete. Move it over to generic code doing
the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ASN.1 parser does not necessarily set the sinfo field,
this patch prevents a NULL pointer dereference on broken
input.
Fixes: 99db44350672 ("PKCS#7: Appropriately restrict authenticated attributes and content type")
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org # 4.3+
|
|
For finding asymmetric key, the input id_0 and id_1 parameters can
not be NULL at the same time. This patch adds the BUG_ON checking
for id_0 and id_1.
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the wrong index number when checking the existence of second
id in function of finding asymmetric key. The id_1 is the second
id that the index in array must be 1 but not 0.
Fixes: 9eb029893ad5 (KEYS: Generalise x509_request_asymmetric_key())
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: Loganaden Velvindron <logan@hackers.mu>
Signed-off-by: Yasir Auleear <yasirmx@hackers.mu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
We forgot to set the error code on this path so it could result in
returning NULL which leads to a NULL dereference.
Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
public_key_verify_signature() was passing the CRYPTO_TFM_REQ_MAY_BACKLOG
flag to akcipher_request_set_callback() but was not handling correctly
the case where a -EBUSY error could be returned from the call to
crypto_akcipher_verify() if backlog was used, possibly casuing
data corruption due to use-after-free of buffers.
Resolve this by handling -EBUSY correctly.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a restrict_link_by_key_or_keyring_chain link restriction that
searches for signing keys in the destination keyring in addition to the
signing key or keyring designated when the destination keyring was
created. Userspace enables this behavior by including the "chain" option
in the keyring restriction:
keyctl(KEYCTL_RESTRICT_KEYRING, keyring, "asymmetric",
"key_or_keyring:<signing key>:chain");
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
|
|
Adds restrict_link_by_signature_keyring(), which uses the restrict_key
member of the provided destination_keyring data structure as the
key or keyring to search for signing keys.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
|
|
Look up asymmetric keyring restriction information using the key-type
lookup_restrict hook.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
|
|
The first argument to the restrict_link_func_t functions was a keyring
pointer. These functions are called by the key subsystem with this
argument set to the destination keyring, but restrict_link_by_signature
expects a pointer to the relevant trusted keyring.
Restrict functions may need something other than a single struct key
pointer to allow or reject key linkage, so the data used to make that
decision (such as the trust keyring) is moved to a new, fourth
argument. The first argument is now always the destination keyring.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
|
|
PKCS#7: Handle certificates that are blacklisted when verifying the chain
of trust on the signatures on a PKCS#7 message.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Allow X.509 certs to be blacklisted based on their TBSCertificate hash.
This is convenient since we have to determine this anyway to be able to
check the signature on an X.509 certificate. This is also what UEFI uses
in its blacklist.
If a certificate built into the kernel is blacklisted, something like the
following might then be seen during boot:
X.509: Cert 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 is blacklisted
Problem loading in-kernel X.509 certificate (-129)
where the hex string shown is the blacklisted hash.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- a crash regression in the new skcipher walker
- incorrect return value in public_key_verify_signature
- fix for in-place signing in the sign-file utility"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - fix crash in virtual walk
sign-file: Fix inplace signing when src and dst names are both specified
crypto: asymmetric_keys - set error code on failure
|
|
In function public_key_verify_signature(), returns variable ret on
error paths. When the call to kmalloc() fails, the value of ret is 0,
and it is not set to an errno before returning. This patch fixes the
bug.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188891
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We shouldn't free cert->pub->key in x509_cert_parse() because
x509_free_certificate() also does this:
BUG: Double free or freeing an invalid pointer
...
Call Trace:
[<ffffffff81896c20>] dump_stack+0x63/0x83
[<ffffffff81356571>] kasan_object_err+0x21/0x70
[<ffffffff81356ed9>] kasan_report_double_free+0x49/0x60
[<ffffffff813561ad>] kasan_slab_free+0x9d/0xc0
[<ffffffff81350b7a>] kfree+0x8a/0x1a0
[<ffffffff81844fbf>] public_key_free+0x1f/0x30
[<ffffffff818455d4>] x509_free_certificate+0x24/0x90
[<ffffffff818460bc>] x509_cert_parse+0x2bc/0x300
[<ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Object at ffff880110bd1900, in cache kmalloc-512 size: 512
....
Freed:
PID = 2579
[<ffffffff8104283b>] save_stack_trace+0x1b/0x20
[<ffffffff813558f6>] save_stack+0x46/0xd0
[<ffffffff81356183>] kasan_slab_free+0x73/0xc0
[<ffffffff81350b7a>] kfree+0x8a/0x1a0
[<ffffffff818460a3>] x509_cert_parse+0x2a3/0x300
[<ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Arbitrary X.509 certificates without authority key identifiers (AKIs)
can be added to "trusted" keyrings, including IMA or EVM certs loaded
from the filesystem. Signature verification is currently bypassed for
certs without AKIs.
Trusted keys were recently refactored, and this bug is not present in
4.6.
restrict_link_by_signature should return -ENOKEY (no matching parent
certificate found) if the certificate being evaluated has no AKIs,
instead of bypassing signature checks and returning 0 (new certificate
accepted).
Reported-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Commit e68503bd68 forgot to set digest_len and thus cause the following
error reported by kexec when launching a crash kernel:
kexec_file_load failed: Bad message
Fixes: e68503bd68 (KEYS: Generalise system_verify_data() to provide access to internal content)
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
cc: kexec@lists.infradead.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
This fix resolves the following kernel panic if an empty or missing
AuthorityKeyIdentifier is encountered and DEBUG is defined in
pkcs7_verify.c.
[ 459.041989] PKEY: <==public_key_verify_signature() = 0
[ 459.041993] PKCS7: Verified signature 1
[ 459.041995] PKCS7: ==> pkcs7_verify_sig_chain()
[ 459.041999] PKCS7: verify Sample DB Certificate for SCP: 01
[ 459.042002] PKCS7: - issuer Sample KEK Certificate for SCP
[ 459.042014] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 459.042135] IP: [<ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.042217] PGD 739e6067 PUD 77719067 PMD 0
[ 459.042286] Oops: 0000 [#1] PREEMPT SMP
[ 459.042328] Modules linked in:
[ 459.042368] CPU: 0 PID: 474 Comm: kexec Not tainted 4.7.0-rc7-WR8.0.0.0_standard+ #18
[ 459.042462] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 10/09/2014
[ 459.042586] task: ffff880073a50000 ti: ffff8800738e8000 task.ti: ffff8800738e8000
[ 459.042675] RIP: 0010:[<ffffffff813e7b4c>] [<ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.042784] RSP: 0018:ffff8800738ebd58 EFLAGS: 00010246
[ 459.042845] RAX: 0000000000000000 RBX: ffff880076b7da80 RCX: 0000000000000006
[ 459.042929] RDX: 0000000000000001 RSI: ffffffff81c85001 RDI: ffffffff81ca00a9
[ 459.043014] RBP: ffff8800738ebd98 R08: 0000000000000400 R09: ffff8800788a304c
[ 459.043098] R10: 0000000000000000 R11: 00000000000060ca R12: ffff8800769a2bc0
[ 459.043182] R13: ffff880077358300 R14: 0000000000000000 R15: ffff8800769a2dc0
[ 459.043268] FS: 00007f24cc741700(0000) GS:ffff880074e00000(0000) knlGS:0000000000000000
[ 459.043365] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 459.043431] CR2: 0000000000000000 CR3: 0000000073a36000 CR4: 00000000001006f0
[ 459.043514] Stack:
[ 459.043530] 0000000000000000 ffffffbf00000020 31ffffff813e68b0 0000000000000002
[ 459.043644] ffff8800769a2bc0 0000000000000000 00000000007197b8 0000000000000002
[ 459.043756] ffff8800738ebdd8 ffffffff81153fb1 0000000000000000 0000000000000000
[ 459.043869] Call Trace:
[ 459.043898] [<ffffffff81153fb1>] verify_pkcs7_signature+0x61/0x140
[ 459.043974] [<ffffffff813e7f0b>] verify_pefile_signature+0x2cb/0x830
[ 459.044052] [<ffffffff813e8470>] ? verify_pefile_signature+0x830/0x830
[ 459.044134] [<ffffffff81048e25>] bzImage64_verify_sig+0x15/0x20
[ 459.046332] [<ffffffff81046e09>] arch_kexec_kernel_verify_sig+0x29/0x40
[ 459.048552] [<ffffffff810f10e4>] SyS_kexec_file_load+0x1f4/0x6c0
[ 459.050768] [<ffffffff81050e36>] ? __do_page_fault+0x1b6/0x550
[ 459.052996] [<ffffffff8199241f>] entry_SYSCALL_64_fastpath+0x17/0x93
[ 459.055242] Code: e8 0a d6 ff ff 85 c0 0f 88 7a fb ff ff 4d 39 fd 4d 89 7d 08 74 45 4d 89 fd e9 14 fe ff ff 4d 8b 76 08 31 c0 48 c7 c7 a9 00 ca 81 <41> 0f b7 36 49 8d 56 02 e8 d0 91 d6 ff 4d 8b 3c 24 4d 85 ff 0f
[ 459.060535] RIP [<ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.063040] RSP <ffff8800738ebd58>
[ 459.065456] CR2: 0000000000000000
[ 459.075998] ---[ end trace c15f0e897cda28dc ]---
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- missing selection in public_key that may result in a build failure
- Potential crash in error path in omap-sham
- ccp AES XTS bug that affects requests larger than 4096"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix AES XTS error for request sizes above 4096
crypto: public_key: select CRYPTO_AKCIPHER
crypto: omap-sham - potential Oops on error in probe
|
|
In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:
crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'
This adds a Kconfig 'select' statement to ensure the dependency
is always there.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The PKCS#7 test key type should use the secondary keyring instead of the
built-in keyring if available as the source of trustworthy keys.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Move the point at which a key is determined to be trustworthy to
__key_link() so that we use the contents of the keyring being linked in to
to determine whether the key being linked in is trusted or not.
What is 'trusted' then becomes a matter of what's in the keyring.
Currently, the test is done when the key is parsed, but given that at that
point we can only sensibly refer to the contents of the system trusted
keyring, we can only use that as the basis for working out the
trustworthiness of a new key.
With this change, a trusted keyring is a set of keys that once the
trusted-only flag is set cannot be added to except by verification through
one of the contained keys.
Further, adding a key into a trusted keyring, whilst it might grant
trustworthiness in the context of that keyring, does not automatically
grant trustworthiness in the context of a second keyring to which it could
be secondarily linked.
To accomplish this, the authentication data associated with the key source
must now be retained. For an X.509 cert, this means the contents of the
AuthorityKeyIdentifier and the signature data.
If system keyrings are disabled then restrict_link_by_builtin_trusted()
resolves to restrict_link_reject(). The integrity digital signature code
still works correctly with this as it was previously using
KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there
is no system keyring against which trust can be determined.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make the system trusted keyring depend on the asymmetric key type as
there's not a lot of point having it if you can't then load asymmetric keys
onto it.
This requires the ASYMMETRIC_KEY_TYPE to be made a bool, not a tristate, as
the Kconfig language doesn't then correctly force ASYMMETRIC_KEY_TYPE to
'y' rather than 'm' if SYSTEM_TRUSTED_KEYRING is 'y'.
Making SYSTEM_TRUSTED_KEYRING *select* ASYMMETRIC_KEY_TYPE instead doesn't
work as the Kconfig interpreter then wrongly complains about dependency
loops.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Move the X.509 trust validation code out to its own file so that it can be
generalised.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
We should call verify_signature() rather than directly calling
public_key_verify_signature() if we have a struct key to use as we
shouldn't be poking around in the private data of the key struct as that's
subtype dependent.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Generalise x509_request_asymmetric_key(). It doesn't really have any
dependencies on X.509 features as it uses generalised IDs and the
public_key structs that contain data extracted from X.509.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Move x509_request_asymmetric_key() to asymmetric_type.c so that it can be
generalised.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make the determination of the trustworthiness of a key dependent on whether
a key that can verify it is present in the supplied ring of trusted keys
rather than whether or not the verifying key has KEY_FLAG_TRUSTED set.
verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust
chain cannot be verified.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Generalise system_verify_data() to provide access to internal content
through a callback. This allows all the PKCS#7 stuff to be hidden inside
this function and removed from the PE file parser and the PKCS#7 test key.
If external content is not required, NULL should be passed as data to the
function. If the callback is not required, that can be set to NULL.
The function is now called verify_pkcs7_signature() to contrast with
verify_pefile_signature() and the definitions of both have been moved into
linux/verification.h along with the key_being_used_for enum.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
There's a bug in the code determining whether a certificate is self-signed
or not: if they have neither AKID nor SKID then we just assume that the
cert is self-signed, which may not be true.
Fix this by checking that the raw subject name matches the raw issuer name
and that the public key algorithm for the key and signature are both the
same in addition to requiring that the AKID bits match.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Extract the signature digest for an X.509 certificate earlier, at the end
of x509_cert_parse() rather than leaving it to the callers thereof since it
has to be called anyway.
Further, immediately after that, check the signature on self-signed
certificates, also rather in the callers of x509_cert_parse().
We note in the x509_certificate struct the following bits of information:
(1) Whether the signature is self-signed (even if we can't check the
signature due to missing crypto).
(2) Whether the key held in the certificate needs unsupported crypto to be
used. We may get a PKCS#7 message with X.509 certs that we can't make
use of - we just ignore them and give ENOPKG at the end it we couldn't
verify anything if at least one of these unusable certs are in the
chain of trust.
(3) Whether the signature held in the certificate needs unsupported crypto
to be checked. We can still use the key held in this certificate,
even if we can't check the signature on it - if it is held in the
system trusted keyring, for instance. We just can't add it to a ring
of trusted keys or follow it further up the chain of trust.
Making these checks earlier allows x509_check_signature() to be removed and
replaced with direct calls to public_key_verify_signature().
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Point to the public_key_signature struct from the pkcs7_signed_info struct
rather than embedding it. This makes the code consistent with the X.509
signature handling and makes it possible to have a common cleanup function.
We also save a copy of the digest in the signature without sharing the
memory with the crypto layer metadata.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Retain the key verification data (ie. the struct public_key_signature)
including the digest and the key identifiers.
Note that this means that we need to take a separate copy of the digest in
x509_get_sig_params() rather than lumping it in with the crypto layer data.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add key identifier pointers to public_key_signature struct so that they can
be used to retain the identifier of the key to be used to verify the
signature in both PKCS#7 and X.509.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Allow authentication data to be stored in an asymmetric key in the 4th
element of the key payload and provide a way for it to be destroyed.
For the public key subtype, this will be a public_key_signature struct.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Clean up some whitespace.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The OID_sha224 case is missing a break and it falls through
to the -ENOPKG error default. Since HASH_ALGO_SHA224 seems
to be supported, this looks like an unintentional missing break.
Fixes: 07f081fb5057 ("PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a bug in pkcs7_validate_trust and its users where the
output value may in fact be taken from uninitialised memory"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
|
|
Despite what the DocBook comment to pkcs7_validate_trust() says, the
*_trusted argument is never set to false.
pkcs7_validate_trust() only positively sets *_trusted upon encountering
a trusted PKCS#7 SignedInfo block.
This is quite unfortunate since its callers, system_verify_data() for
example, depend on pkcs7_validate_trust() clearing *_trusted on non-trust.
Indeed, UBSAN splats when attempting to load the uninitialized local
variable 'trusted' from system_verify_data() in pkcs7_validate_trust():
UBSAN: Undefined behaviour in crypto/asymmetric_keys/pkcs7_trust.c:194:14
load of value 82 is not a valid value for type '_Bool'
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff8194113b>] ubsan_epilogue+0xd/0x4e
[<ffffffff819419fa>] __ubsan_handle_load_invalid_value+0x111/0x158
[<ffffffff819418e9>] ? val_to_string.constprop.12+0xcf/0xcf
[<ffffffff818334a4>] ? x509_request_asymmetric_key+0x114/0x370
[<ffffffff814b83f0>] ? kfree+0x220/0x370
[<ffffffff818312c2>] ? public_key_verify_signature_2+0x32/0x50
[<ffffffff81835e04>] pkcs7_validate_trust+0x524/0x5f0
[<ffffffff813c391a>] system_verify_data+0xca/0x170
[<ffffffff813c3850>] ? top_trace_array+0x9b/0x9b
[<ffffffff81510b29>] ? __vfs_read+0x279/0x3d0
[<ffffffff8129372f>] mod_verify_sig+0x1ff/0x290
[...]
The implication is that pkcs7_validate_trust() effectively grants trust
when it really shouldn't have.
Fix this by explicitly setting *_trusted to false at the very beginning
of pkcs7_validate_trust().
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the identifier public key and digest algorithm fields text instead of
enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template. This means that the
public_key subtype no longer has any dependencies on public key type.
To make this work, the following changes have been made:
(1) The rsa pkcs1pad template is now used for RSA keys. This strips off the
padding and returns just the message hash.
(2) In a previous patch, the pkcs1pad template gained an optional second
parameter that, if given, specifies the hash used. We now give this,
and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
encoding and verifies that the correct digest OID is present.
(3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
something that doesn't care about what the encryption actually does
and and has been merged into public_key.c.
(4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone. Module signing must set
CONFIG_CRYPTO_RSA=y instead.
Thoughts:
(*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
the padding template? Should there be multiple padding templates
registered that share most of the code?
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ASN.1 GeneralizedTime object carries an ISO 8601 format date and time.
The time is permitted to show midnight as 00:00 or 24:00 (the latter being
equivalent of 00:00 of the following day).
The permitted value is checked in x509_decode_time() but the actual
handling is left to mktime64().
Without this patch, certain X.509 certificates will be rejected and could
lead to an unbootable kernel.
Note that with this patch we also permit any 24:mm:ss time and extend this
to UTCTime, which whilst not strictly correct don't permit much leeway in
fiddling date strings.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: David Woodhouse <David.Woodhouse@intel.com>
cc: John Stultz <john.stultz@linaro.org>
|
|
The format of ASN.1 GeneralizedTime seems to be specified by ISO 8601
[X.680 46.3] and this apparently supports leap seconds (ie. the seconds
field is 60). It's not entirely clear that ASN.1 expects it, but we can
relax the seconds check slightly for GeneralizedTime.
This results in us passing a time with sec as 60 to mktime64(), which
handles it as being a duplicate of the 0th second of the next minute.
We can't really do otherwise without giving the kernel much greater
knowledge of where all the leap seconds are. Unfortunately, this would
require change the mapping of the kernel's current-time-in-seconds.
UTCTime, however, only supports a seconds value in the range 00-59, but for
the sake of simplicity allow this with UTCTime also.
Without this patch, certain X.509 certificates will be rejected,
potentially making a kernel unbootable.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: David Woodhouse <David.Woodhouse@intel.com>
cc: John Stultz <john.stultz@linaro.org>
|
|
There are still a couple of minor issues in the X.509 leap year handling:
(1) To avoid doing a modulus-by-400 in addition to a modulus-by-100 when
determining whether the year is a leap year or not, I divided the year
by 100 after doing the modulus-by-100, thereby letting the compiler do
one instruction for both, and then did a modulus-by-4.
Unfortunately, I then passed the now-modified year value to mktime64()
to construct a time value.
Since this isn't a fast path and since mktime64() does a bunch of
divisions, just condense down to "% 400". It's also easier to read.
(2) The default month length for any February where the year doesn't
divide by four exactly is obtained from the month_length[] array where
the value is 29, not 28.
This is fixed by altering the table.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: stable@vger.kernel.org
|
|
The boolean want is not initialized and hence garbage. The default should
be false (later it is only set to true on tne sinfo->authattrs check).
Found with static analysis using CoverityScan
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
|