| Age | Commit message (Collapse) | Author |
|---|
|
The 'lend' parameter of truncate_inode_pages_range is required to be
inclusive, so follow the rule.
This patch fixes one memory corruption triggered by discard.
Cc: <stable@vger.kernel.org>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Fixes: 351499a172c0 ("block: Invalidate cache on discard v2")
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
struct efi_uga_draw_protocol *uga = NULL, *first_uga;
efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
unsigned long nr_ugas;
- u32 *handles = (u32 *)uga_handle;;
+ u32 *handles = (u32 *)uga_handle;
efi_status_t status = EFI_INVALID_PARAMETER;
int i;
This patch is the result of the following script:
$ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)
... followed by manual review to make sure it's all good.
Splitting this up is just crazy talk, let's get over with this and just do it.
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.
Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
Changes since v2->v3:
-using __set_current_state() instead of set_current_state()
Changes since v1->v2:
-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 'a6a252e64914 ("blk-mq-sched: decide how to handle flush rq via
RQF_FLUSH_SEQ")' makes all non-flush re-prepared requests for a device
be re-inserted into the active I/O scheduler for that device. As a
consequence, I/O schedulers may get the same request inserted again,
even several times, without a finish_request invoked on that request
before each re-insertion.
This fact is the cause of the failure reported in [1]. For an I/O
scheduler, every re-insertion of the same re-prepared request is
equivalent to the insertion of a new request. For schedulers like
mq-deadline or kyber, this fact causes no harm. In contrast, it
confuses a stateful scheduler like BFQ, which keeps state for an I/O
request, until the finish_request hook is invoked on the request. In
particular, BFQ may get stuck, waiting forever for the number of
request dispatches, of the same request, to be balanced by an equal
number of request completions (while there will be one completion for
that request). In this state, BFQ may refuse to serve I/O requests
from other bfq_queues. The hang reported in [1] then follows.
However, the above re-prepared requests undergo a requeue, thus the
requeue_request hook of the active elevator is invoked for these
requests, if set. This commit then addresses the above issue by
properly implementing the hook requeue_request in BFQ.
[1] https://marc.info/?l=linux-block&m=151211117608676
Reported-by: Ivan Kozik <ivan@ludios.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Serena Ziviani <ziviani.serena@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The classic error injection mechanism, should_fail_request() does not
support use cases where more information is required (from the entire
struct bio, for example).
To that end, this patch introduces should_fail_bio(), which calls
should_fail_request() under the hood but provides a convenient
place for kprobes to hook into if they require the entire struct bio.
This patch also replaces some existing calls to should_fail_request()
with should_fail_bio() with no degradation in performance.
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mikulas reported a workload that saw bad performance, and figured
out what it was due to various other types of requests being
accounted as reads. Flush requests, for instance. Due to the
high latency of those, we heavily throttle the writes to keep
the latencies in balance. But they really should be accounted
as writes.
Fix this by checking the exact type of the request. If it's a
read, account as a read, if it's a write or a flush, account
as a write. Any other request we disregard. Previously everything
would have been mistakenly accounted as reads.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
|
|
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I ran into an issue on my laptop that triggered a bug on the
discard path:
WARNING: CPU: 2 PID: 207 at drivers/nvme/host/core.c:527 nvme_setup_cmd+0x3d3/0x430
Modules linked in: rfcomm fuse ctr ccm bnep arc4 binfmt_misc snd_hda_codec_hdmi nls_iso8859_1 nls_cp437 vfat snd_hda_codec_conexant fat snd_hda_codec_generic iwlmvm snd_hda_intel snd_hda_codec snd_hwdep mac80211 snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq x86_pkg_temp_thermal intel_powerclamp kvm_intel uvcvideo iwlwifi btusb snd_seq_device videobuf2_vmalloc btintel videobuf2_memops kvm snd_timer videobuf2_v4l2 bluetooth irqbypass videobuf2_core aesni_intel aes_x86_64 crypto_simd cryptd snd glue_helper videodev cfg80211 ecdh_generic soundcore hid_generic usbhid hid i915 psmouse e1000e ptp pps_core xhci_pci xhci_hcd intel_gtt
CPU: 2 PID: 207 Comm: jbd2/nvme0n1p7- Tainted: G U 4.15.0+ #176
Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET59W (1.33 ) 12/19/2017
RIP: 0010:nvme_setup_cmd+0x3d3/0x430
RSP: 0018:ffff880423e9f838 EFLAGS: 00010217
RAX: 0000000000000000 RBX: ffff880423e9f8c8 RCX: 0000000000010000
RDX: ffff88022b200010 RSI: 0000000000000002 RDI: 00000000327f0000
RBP: ffff880421251400 R08: ffff88022b200000 R09: 0000000000000009
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000ffff
R13: ffff88042341e280 R14: 000000000000ffff R15: ffff880421251440
FS: 0000000000000000(0000) GS:ffff880441500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b684795030 CR3: 0000000002e09006 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
nvme_queue_rq+0x40/0xa00
? __sbitmap_queue_get+0x24/0x90
? blk_mq_get_tag+0xa3/0x250
? wait_woken+0x80/0x80
? blk_mq_get_driver_tag+0x97/0xf0
blk_mq_dispatch_rq_list+0x7b/0x4a0
? deadline_remove_request+0x49/0xb0
blk_mq_do_dispatch_sched+0x4f/0xc0
blk_mq_sched_dispatch_requests+0x106/0x170
__blk_mq_run_hw_queue+0x53/0xa0
__blk_mq_delay_run_hw_queue+0x83/0xa0
blk_mq_run_hw_queue+0x6c/0xd0
blk_mq_sched_insert_request+0x96/0x140
__blk_mq_try_issue_directly+0x3d/0x190
blk_mq_try_issue_directly+0x30/0x70
blk_mq_make_request+0x1a4/0x6a0
generic_make_request+0xfd/0x2f0
? submit_bio+0x5c/0x110
submit_bio+0x5c/0x110
? __blkdev_issue_discard+0x152/0x200
submit_bio_wait+0x43/0x60
ext4_process_freed_data+0x1cd/0x440
? account_page_dirtied+0xe2/0x1a0
ext4_journal_commit_callback+0x4a/0xc0
jbd2_journal_commit_transaction+0x17e2/0x19e0
? kjournald2+0xb0/0x250
kjournald2+0xb0/0x250
? wait_woken+0x80/0x80
? commit_timeout+0x10/0x10
kthread+0x111/0x130
? kthread_create_worker_on_cpu+0x50/0x50
? do_group_exit+0x3a/0xa0
ret_from_fork+0x1f/0x30
Code: 73 89 c1 83 ce 10 c1 e1 10 09 ca 83 f8 04 0f 87 0f ff ff ff 8b 4d 20 48 8b 7d 00 c1 e9 09 48 01 8c c7 00 08 00 00 e9 f8 fe ff ff <0f> ff 4c 89 c7 41 bc 0a 00 00 00 e8 0d 78 d6 ff e9 a1 fc ff ff
---[ end trace 50d361cc444506c8 ]---
print_req_error: I/O error, dev nvme0n1, sector 847167488
Decoding the assembly, the request claims to have 0xffff segments,
while nvme counts two. This turns out to be because we don't check
for a data carrying request on the mq scheduler path, and since
blk_phys_contig_segment() returns true for a non-data request,
we decrement the initial segment count of 0 and end up with
0xffff in the unsigned short.
There are a few issues here:
1) We should initialize the segment count for a discard to 1.
2) The discard merging is currently using the data limits for
segments and sectors.
Fix this up by having attempt_merge() correctly identify the
request, and by initializing the segment count correctly
for discards.
This can only be triggered with mq-deadline on discard capable
devices right now, which isn't a common configuration.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This status is returned from driver to block layer if device related
resource is unavailable, but driver can guarantee that IO dispatch
will be triggered in future when the resource is available.
Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver
returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after
a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is
3 ms because both scsi-mq and nvmefc are using that magic value.
If a driver can make sure there is in-flight IO, it is safe to return
BLK_STS_DEV_RESOURCE because:
1) If all in-flight IOs complete before examining SCHED_RESTART in
blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue
is run immediately in this case by blk_mq_dispatch_rq_list();
2) if there is any in-flight IO after/when examining SCHED_RESTART
in blk_mq_dispatch_rq_list():
- if SCHED_RESTART isn't set, queue is run immediately as handled in 1)
- otherwise, this request will be dispatched after any in-flight IO is
completed via blk_mq_sched_restart()
3) if SCHED_RESTART is set concurently in context because of
BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two
cases and make sure IO hang can be avoided.
One invariant is that queue will be rerun if SCHED_RESTART is set.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
|
|
Use pr_debug instead of hand crafted macros. This way it is not needed to
re-compile the kernel to enable bsg debug outputs and it's possible to
selectively enable specific prints.
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Attributes that only implement .seq_ops are read-only, any write to
them should be rejected. But currently kernel would crash when
writing to such debugfs entries, e.g.
chmod +w /sys/kernel/debug/block/<dev>/requeue_list
echo 0 > /sys/kernel/debug/block/<dev>/requeue_list
chmod -w /sys/kernel/debug/block/<dev>/requeue_list
Fix it by returning -EPERM in blk_mq_debugfs_write() when writing to
such attributes.
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We inadvertently set it again on the source bio, but we need
to set it on the new split bio instead.
Fixes: fbbaf700e7b1 ("block: trace completion of all bios.")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
use queue_is_rq_based instead of open code.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The previous patch removed all users of these two functions. Hence
also remove the functions themselves.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that calling blk_mq_run_hw_queue() or
blk_mq_kick_requeue_list() triggers a queue run without delay even
if blk_mq_delay_run_hw_queue() has been called recently and if its
delay has not yet expired.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_request_issue_directly()
Most blk-mq functions have a name that follows the pattern blk_mq_${action}.
However, the function name blk_mq_request_direct_issue is an exception.
Hence rename this function. This patch does not change any functionality.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In mixed read/write workload on SSD, write latency is much lower than
read. But now we only track and record read latency and then use it as
threshold base for both read and write io latency accounting. As a
result, write io latency will always be considered as good and
bad_bio_cnt is much smaller than 20% of bio_cnt. That is to mean, the
tg to be checked will be treated as idle most of the time and still let
others dispatch more ios, even it is truly running under low limit and
wants its low limit to be guaranteed, which is not we expected in fact.
So track read and write request individually, which can bring more
precise latency control for low limit idle detection.
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similar to blkdev_write_iter(), return -EPERM if the partition is
read-only. This covers ioctl(), fallocate() and most in-kernel users
but isn't meant to be exhaustive -- everything else will be caught in
generic_make_request_checks(), fail with -EIO and can be fixed later.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Regular block device writes go through blkdev_write_iter(), which does
bdev_read_only(), while zeroout/discard/etc requests are never checked,
both userspace- and kernel-triggered. Add a generic catch-all check to
generic_make_request_checks() to actually enforce ioctl(BLKROSET) and
set_disk_ro(), which is used by quite a few drivers for things like
snapshots, read-only backing files/images, etc.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
export these two interface for cgroup-v1.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The __blk_mq_register_dev(), blk_mq_unregister_dev(),
elv_register_queue() and elv_unregister_queue() calls need to be
protected with sysfs_lock but other code in these functions not.
Hence protect only this code with sysfs_lock. This patch fixes a
locking inversion issue in blk_unregister_queue() and also in an
error path of blk_register_queue(): it is not allowed to hold
sysfs_lock around the kobject_del(&q->kobj) call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch does not change any functionality.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These two functions are only called from inside the block layer so
unexport them.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To maximise responsiveness, BFQ raises the weight, and performs device
idling, for bfq_queues associated with processes deemed as
interactive. In particular, weight raising has a maximum duration,
equal to the time needed to start a large application. If a
weight-raised process goes on doing I/O beyond this maximum duration,
it loses weight-raising.
This mechanism is evidently vulnerable to the following false
positives: I/O-bound applications that will go on doing I/O for much
longer than the duration of weight-raising. These applications have
basically no benefit from being weight-raised at the beginning of
their I/O. On the opposite end, while being weight-raised, these
applications
a) unjustly steal throughput to applications that may truly need
low latency;
b) make BFQ uselessly perform device idling; device idling results
in loss of device throughput with most flash-based storage, and may
increase latencies when used purposelessly.
This commit adds a countermeasure to reduce both the above
problems. To introduce this countermeasure, we provide the following
extra piece of information (full details in the comments added by this
commit). During the start-up of the large application used as a
reference to set the duration of weight-raising, involved processes
transfer at most ~110K sectors each. Accordingly, a process initially
deemed as interactive has no right to be weight-raised any longer,
once transferred 110K sectors or more.
Basing on this consideration, this commit early-ends weight-raising
for a bfq_queue if the latter happens to have received an amount of
service at least equal to 110K sectors (actually, a little bit more,
to keep a safety margin). I/O-bound applications that reach a high
throughput, such as file copy, get to this threshold much before the
allowed weight-raising period finishes. Thus this early ending of
weight-raising reduces the amount of time during which these
applications cause the problems described above.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Asynchronous I/O can easily starve synchronous I/O (both sync reads
and sync writes), by consuming all request tags. Similarly, storms of
synchronous writes, such as those that sync(2) may trigger, can starve
synchronous reads. In their turn, these two problems may also cause
BFQ to loose control on latency for interactive and soft real-time
applications. For example, on a PLEXTOR PX-256M5S SSD, LibreOffice
Writer takes 0.6 seconds to start if the device is idle, but it takes
more than 45 seconds (!) if there are sequential writes in the
background.
This commit addresses this issue by limiting the maximum percentage of
tags that asynchronous I/O requests and synchronous write requests can
consume. In particular, this commit grants a higher threshold to
synchronous writes, to prevent the latter from being starved by
asynchronous I/O.
According to the above test, LibreOffice Writer now starts in about
1.2 seconds on average, regardless of the background workload, and
apart from some rare outlier. To check this improvement, run, e.g.,
sudo ./comm_startup_lat.sh bfq 5 5 seq 10 "lowriter --terminate_after_init"
for the comm_startup_lat benchmark in the S suite [1].
[1] https://github.com/Algodev-github/S
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we run into blk_mq_request_direct_issue(), when queue is busy, we
don't want to dispatch this request into hctx->dispatch_list, and
what we need to do is to return the queue busy info to caller, so
that caller can deal with it well.
Fixes: 396eaf21ee ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Reported-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit:
923218f6166a ("blk-mq: don't allocate driver tag upfront for flush rq")
we no longer use the 'can_block' argument in
blk_mq_sched_insert_request(). Kill it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Added actual commit message as to why it's being removed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.
1) This way isn't efficient enough because the hctx spinlock is always
used.
2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO. But dm-rq currently can't get the underlying queue's
dispatch feedback at all. Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging). This
obviously causes very bad sequential IO performance.
Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t). If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request. Whereby preserving the opportunity to
merge IO.
With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional change. Just makes code flow more logically.
In following commit, __blk_mq_try_issue_directly() will be used to
return the dispatch result (blk_status_t) to DM. DM needs this
information to improve IO merging.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We know this WARN_ON is harmless and in reality it may be trigged,
so convert it to printk() and dump_stack() to avoid to confusing
people.
Also add comment about two releated races here.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When hctx->next_cpu is set from possible online CPUs, there is one
race in which hctx->next_cpu may be set as >= nr_cpu_ids, and finally
break workqueue.
The race can be triggered in the following two sitations:
1) when one CPU is becoming DEAD, blk_mq_hctx_notify_dead() is called
to dispatch requests from the DEAD cpu context, but at that
time, this DEAD CPU has been cleared from 'cpu_online_mask', so all
CPUs in hctx->cpumask may become offline, and cause hctx->next_cpu set
a bad value.
2) blk_mq_delay_run_hw_queue() is called from CPU B, and found the queue
should be run on the other CPU A, then CPU A may become offline at the
same time and all CPUs in hctx->cpumask become offline.
This patch deals with this issue by re-selecting next CPU, and making
sure it is set correctly.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: "jianchao.wang" <jianchao.w.wang@oracle.com>
Fixes: 20e4d81393 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
During stress tests by syzkaller on the sg driver the block layer
infrequently returns EINVAL. Closer inspection shows the block
layer was trying to return ENOMEM (which is much more
understandable) but for some reason overroad that useful error.
Patch below does not show this (unchanged) line:
ret =__blk_rq_map_user_iov(rq, map_data, &i, gfp_mask, copy);
That 'ret' was being overridden when that function failed.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since I can remember DM has forced the block layer to allow the
allocation and initialization of the request_queue to be distinct
operations. Reason for this is block/genhd.c:add_disk() has requires
that the request_queue (and associated bdi) be tied to the gendisk
before add_disk() is called -- because add_disk() also deals with
exposing the request_queue via blk_register_queue().
DM's dynamic creation of arbitrary device types (and associated
request_queue types) requires the DM device's gendisk be available so
that DM table loads can establish a master/slave relationship with
subordinate devices that are referenced by loaded DM tables -- using
bd_link_disk_holder(). But until these DM tables, and their associated
subordinate devices, are known DM cannot know what type of request_queue
it needs -- nor what its queue_limits should be.
This chicken and egg scenario has created all manner of problems for DM
and, at times, the block layer.
Summary of changes:
- Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant
that drivers may use to add a disk without also calling
blk_register_queue(). Driver must call blk_register_queue() once its
request_queue is fully initialized.
- Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED
is not set. It won't be set if driver used add_disk_no_queue_reg()
but driver encounters an error and must del_gendisk() before calling
blk_register_queue().
- Export blk_register_queue().
These changes allow DM to use add_disk_no_queue_reg() to anchor its
gendisk as the "master" for master/slave relationships DM must establish
with subordinate devices referenced in DM tables that get loaded. Once
all "slave" devices for a DM device are known its request_queue can be
properly initialized and then advertised via sysfs -- important
improvement being that no request_queue resource initialization
performed by blk_register_queue() is missed for DM devices anymore.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The original commit e9a823fb34a8b (block: fix warning when I/O elevator
is changed as request_queue is being removed) is pretty conflated.
"conflated" because the resource being protected by q->sysfs_lock isn't
the queue_flags (it is the 'queue' kobj).
q->sysfs_lock serializes __elevator_change() (via elv_iosched_store)
from racing with blk_unregister_queue():
1) By holding q->sysfs_lock first, __elevator_change() can complete
before a racing blk_unregister_queue().
2) Conversely, __elevator_change() is testing for QUEUE_FLAG_REGISTERED
in case elv_iosched_store() loses the race with blk_unregister_queue(),
it needs a way to know the 'queue' kobj isn't there.
Expand the scope of blk_unregister_queue()'s q->sysfs_lock use so it is
held until after the 'queue' kobj is removed.
To do so blk_mq_unregister_dev() must not also take q->sysfs_lock. So
rename __blk_mq_unregister_dev() to blk_mq_unregister_dev().
Also, blk_unregister_queue() should use q->queue_lock to protect against
any concurrent writes to q->queue_flags -- even though chances are the
queue is being cleaned up so no concurrent writes are likely.
Fixes: e9a823fb34a8b ("block: fix warning when I/O elevator is changed as request_queue is being removed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
device_add_disk() will only call bdi_register_owner() if
!GENHD_FL_HIDDEN, so it follows that del_gendisk() should only call
bdi_unregister() if !GENHD_FL_HIDDEN.
Found with code inspection. bdi_unregister() won't do any harm if
bdi_register_owner() wasn't used but best to avoid the unnecessary
call to bdi_unregister().
Fixes: 8ddcd65325 ("block: introduce GENHD_FL_HIDDEN")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit moved the clearing of rq->rq_flags later,
but we may have already set RQF_MQ_INFLIGHT when that happens.
Ensure that we correctly initialize rq->rq_flags to the
right value.
This is based on an original fix by Ming, just rewritten to not
require a conditional.
Fixes: 7c3fb70f0341 ("block: rearrange a few request fields for better cache layout")
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looking at debug output, we see:
./000000009ddfa913/requeue_list:000000009646711c {.op=READ, .state=idle, gen=0x1
18, abort_gen=0x0, .cmd_flags=, .rq_flags=SORTED|1|SOFTBARRIER|IO_STAT, complete
=0, .tag=-1, .internal_tag=217}
Note the '1' between SORTED and SOFTBARRIER - that's because no name
as defined for RQF_STARTED. Fixed that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The previous patch assigns interrupt vectors to all possible CPUs, so
now hctx can be mapped to possible CPUs, this patch applies this fact
to simplify queue mapping & schedule so that we don't need to handle
CPU hotplug for dealing with physical CPU plug & unplug. With this
simplication, we can work well on physical CPU plug & unplug, which
is a normal use case for VM at least.
Make sure we allocate blk_mq_ctx structures for all possible CPUs, and
set hctx->numa_node for possible CPUs which are mapped to this hctx. And
only choose the online CPUs for schedule.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU")
(merged the three into one because any single one may not work, and fix
selecting online CPUs for scheduler)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch does not change any functionality but makes the
blk_mq_mark_tag_wait() code slightly easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch avoids that sparse reports the following:
block/blk-mq.c:637:33: warning: context imbalance in 'hctx_unlock' - unexpected unlock
block/blk-mq.c:642:9: warning: context imbalance in 'hctx_lock' - wrong count at exit
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After the first few months, the message has not led to many bug reports.
It's been almost five years now, and in practice the main source of
it seems to be MTIOCGET that someone is using to detect tape devices.
While we could whitelist it just like CDROM_GET_CAPABILITY, this patch
just removes the message altogether.
The patch also removes the "safe but not very useful" ioctl whitelist,
as suggested by Christoph. I doubt anything is using most of those
ioctls _in general_, let alone on a partition.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move completion related items (like the call single data) near the
end of the struct, instead of mixing them in with the initial
queueing related fields.
Move queuelist below the bio structures. Then we have all
queueing related bits in the first cache line.
This yields a 1.5-2% increase in IOPS for a null_blk test, both for
sync and for high thread count access. Sync test goes form 975K to
992K, 32-thread case from 20.8M to 21.2M IOPS.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only have one atomic flag left. Instead of using an entire
unsigned long for that, steal the bottom bit of the deadline
field that we already reserved.
Remove ->atomic_flags, since it's now unused.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We reduce the resolution of request expiry, but since we're already
using jiffies for this where resolution depends on the kernel
configuration and since the timeout resolution is coarse anyway,
that should be fine.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't need this to be an atomic flag, it can be a regular
flag. We either end up on the same CPU for the polling, in which
case the state is sane, or we did the sleep which would imply
the needed barrier to ensure we see the right state.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
