summaryrefslogtreecommitdiff
path: root/block/blk-lib.c
AgeCommit message (Collapse)Author
2020-12-01block: move the start_sect field to struct block_deviceChristoph Hellwig
Move the start_sect field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-05block: check queue's limits.discard_granularity in __blkdev_issue_discard()Coly Li
If create a loop device with a backing NVMe SSD, current loop device driver doesn't correctly set its queue's limits.discard_granularity and leaves it as 0. If a discard request at LBA 0 on this loop device, in __blkdev_issue_discard() the calculated req_sects will be 0, and a zero length discard request will trigger a BUG() panic in generic block layer code at block/blk-mq.c:563. [ 955.565006][ C39] ------------[ cut here ]------------ [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40 [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020 [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110 [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54 [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202 [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003 [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000 [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160 [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000 [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0 [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 955.749284][ C39] PKRU: 55555554 [ 955.749285][ C39] Call Trace: [ 955.749290][ C39] blk_done_softirq+0x99/0xc0 [ 957.550669][ C39] __do_softirq+0xd3/0x45f [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0 [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0 [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0 [ 957.550684][ C39] run_ksoftirqd+0x30/0x60 [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0 [ 957.886225][ C39] ? sort_range+0x20/0x20 [ 957.886226][ C39] kthread+0x137/0x160 [ 957.886228][ C39] ? kthread_park+0x90/0x90 [ 957.886231][ C39] ret_from_fork+0x22/0x30 [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]--- This is the procedure to reproduce the panic, # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1 # losetup -f /dev/nvme0n1 --direct-io=on # blkdiscard /dev/loop0 -o 0 -l 0x200 This patch fixes the issue by checking q->limits.discard_granularity in __blkdev_issue_discard() before composing the discard bio. If the value is 0, then prints a warning oops information and returns -EOPNOTSUPP to the caller to indicate that this buggy device driver doesn't support discard request. Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()") Fixes: c52abf563049 ("loop: Better discard support for block devices") Reported-and-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Evan Green <evgreen@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17block: improve discard bio alignment in __blkdev_issue_discard()Coly Li
This patch improves discard bio split for address and size alignment in __blkdev_issue_discard(). The aligned discard bio may help underlying device controller to perform better discard and internal garbage collection, and avoid unnecessary internal fragment. Current discard bio split algorithm in __blkdev_issue_discard() may have non-discarded fregment on device even the discard bio LBA and size are both aligned to device's discard granularity size. Here is the example steps on how to reproduce the above problem. - On a VMWare ESXi 6.5 update3 installation, create a 51GB virtual disk with thin mode and give it to a Linux virtual machine. - Inside the Linux virtual machine, if the 50GB virtual disk shows up as /dev/sdb, fill data into the first 50GB by, # dd if=/dev/zero of=/dev/sdb bs=4096 count=13107200 - Discard the 50GB range from offset 0 on /dev/sdb, # blkdiscard /dev/sdb -o 0 -l 53687091200 - Observe the underlying mapping status of the device # sg_get_lba_status /dev/sdb -m 1048 --lba=0 descriptor LBA: 0x0000000000000000 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000000000800 blocks: 16773120 deallocated descriptor LBA: 0x0000000000fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000017ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000001fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000027ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000002fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000037ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000003fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000047ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000004fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000057ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000005fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000006000000 blocks: 6291456 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated Although the discard bio starts at LBA 0 and has 50<<30 bytes size which are perfect aligned to the discard granularity, from the above list these are many 1MB (2048 sectors) internal fragments exist unexpectedly. The problem is in __blkdev_issue_discard(), an improper algorithm causes an improper bio size which is not aligned. 25 int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, 26 sector_t nr_sects, gfp_t gfp_mask, int flags, 27 struct bio **biop) 28 { 29 struct request_queue *q = bdev_get_queue(bdev); [snipped] 56 57 while (nr_sects) { 58 sector_t req_sects = min_t(sector_t, nr_sects, 59 bio_allowed_max_sectors(q)); 60 61 WARN_ON_ONCE((req_sects << 9) > UINT_MAX); 62 63 bio = blk_next_bio(bio, 0, gfp_mask); 64 bio->bi_iter.bi_sector = sector; 65 bio_set_dev(bio, bdev); 66 bio_set_op_attrs(bio, op, 0); 67 68 bio->bi_iter.bi_size = req_sects << 9; 69 sector += req_sects; 70 nr_sects -= req_sects; [snipped] 79 } 80 81 *biop = bio; 82 return 0; 83 } 84 EXPORT_SYMBOL(__blkdev_issue_discard); At line 58-59, to discard a 50GB range, req_sects is set as return value of bio_allowed_max_sectors(q), which is 8388607 sectors. In the above case, the discard granularity is 2048 sectors, although the start LBA and discard length are aligned to discard granularity, req_sects never has chance to be aligned to discard granularity. This is why there are some still-mapped 2048 sectors fragment in every 4 or 8 GB range. If req_sects at line 58 is set to a value aligned to discard_granularity and close to UNIT_MAX, then all consequent split bios inside device driver are (almostly) aligned to discard_granularity of the device queue. The 2048 sectors still-mapped fragment will disappear. This patch introduces bio_aligned_discard_max_sectors() to return the the value which is aligned to q->limits.discard_granularity and closest to UINT_MAX. Then this patch replaces bio_allowed_max_sectors() with this new routine to decide a more proper split bio length. But we still need to handle the situation when discard start LBA is not aligned to q->limits.discard_granularity, otherwise even the length is aligned, current code may still leave 2048 fragment around every 4GB range. Therefore, to calculate req_sects, firstly the start LBA of discard range is checked (including partition offset), if it is not aligned to discard granularity, the first split location should make sure following bio has bi_sector aligned to discard granularity. Then there won't be still-mapped fragment in the middle of the discard range. The above is how this patch improves discard bio alignment in __blkdev_issue_discard(). Now with this patch, after discard with same command line mentiond previously, sg_get_lba_status returns, descriptor LBA: 0x0000000000000000 blocks: 106954752 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated We an see there is no 2048 sectors segment anymore, everything is clean. Reported-and-tested-by: Acshai Manoj <acshai.manoj@microfocus.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14block: fix 32 bit overflow in __blkdev_issue_discard()Dave Chinner
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard") Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Killed pointless WARN_ON(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: make sure writesame bio is aligned with logical block sizeMing Lei
Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: b49a0871be31a745b2ef ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: cleanup __blkdev_issue_discard()Ming Lei
Cleanup __blkdev_issue_discard() a bit: - remove local variable of 'end_sect' - remove code block of 'fail' Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: make sure discard bio is aligned with logical block sizeMing Lei
Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7cbb56a6 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Improve zone reset executionDamien Le Moal
There is no need to synchronously execute all REQ_OP_ZONE_RESET BIOs necessary to reset a range of zones. Similarly to what is done for discard BIOs in blk-lib.c, all zone reset BIOs can be chained and executed asynchronously and a synchronous call done only for the last BIO of the chain. Modify blkdev_reset_zones() to operate similarly to blkdev_issue_discard() using the next_bio() helper for chaining BIOs. To avoid code duplication of that function in blk_zoned.c, rename next_bio() into blk_next_bio() and declare it as a block internal function in blk.h. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18block: don't deal with discard limit in blkdev_issue_discard()Ming Lei
blk_queue_split() does respect this limit via bio splitting, so no need to do that in blkdev_issue_discard(), then we can align to normal bio submit(bio_add_page() & submit_bio()). More importantly, this patch fixes one issue introduced in a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks"), in which zero discard bio may be generated in case of zero alignment. Fixes: a22c4d7e34402ccdf3 ("block: re-add discard_granularity and alignment checks") Cc: stable@vger.kernel.org Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block: fix infinite loop if the device loses discard capabilityMikulas Patocka
If __blkdev_issue_discard is in progress and a device mapper device is reloaded with a table that doesn't support discard, q->limits.max_discard_sectors is set to zero. This results in infinite loop in __blkdev_issue_discard. This patch checks if max_discard_sectors is zero and aborts with -EOPNOTSUPP. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Zdenek Kabelac <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08block: break discard submissions into the user defined sizeJens Axboe
Don't build discards bigger than what the user asked for, if the user decided to limit the size by writing to 'discard_max_bytes'. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-18block: add bdev_read_only() checks to common helpersIlya Dryomov
Similar to blkdev_write_iter(), return -EPERM if the partition is read-only. This covers ioctl(), fallocate() and most in-kernel users but isn't meant to be exhaustive -- everything else will be caught in generic_make_request_checks(), fail with -EIO and can be fixed later. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25block: cope with WRITE ZEROES failing in blkdev_issue_zeroout()Ilya Dryomov
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to permit trying WRITE SAME on older SCSI devices, unless ->no_write_same is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO: $ fallocate -zn -l 1k /dev/sdg fallocate: fallocate failed: Remote I/O error $ fallocate -zn -l 1k /dev/sdg # OK $ fallocate -zn -l 1k /dev/sdg # OK The following calls succeed because sd_done() sets ->no_write_same in response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing __blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios. This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if sd_done() has just set ->no_write_same thus indicating lack of offload support. Fixes: c20cfc27a473 ("block: stop using blkdev_issue_write_same for zeroing") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25block: factor out __blkdev_issue_zero_pages()Ilya Dryomov
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11block: fix integer overflow in __blkdev_sectors_to_bio_pages()Mikulas Patocka
Fix possible integer overflow in __blkdev_sectors_to_bio_pages if sector_t is 32-bit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 615d22a51c04 ("block: Fix __blkdev_issue_zeroout loop") Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-06block: Fix __blkdev_issue_zeroout loopDamien Le Moal
The BIO issuing loop in __blkdev_issue_zeroout() is allocating BIOs with a maximum number of bvec (pages) equal to min(nr_sects, (sector_t)BIO_MAX_PAGES) This works since the requested number of bvecs will always be limited to the absolute maximum number supported (BIO_MAX_PAGES), but this is ineficient as too many bvec entries may be requested due to the different units being used in the min() operation (number of sectors vs number of pages). To fix this, introduce the helper __blkdev_sectors_to_bio_pages() to correctly calculate the number of bvecs for zeroout BIOs as the issuing loop progresses. The calculation is done using consistent units and makes sure that the number of pages return is at least 1 (for cases where the number of sectors is less that the number of sectors in a page). Also remove a trailing space after the bit shift in the internal loop min() call. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-04-08block: remove the discard_zeroes_data flagChristoph Hellwig
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: stop using discards for zeroingChristoph Hellwig
Now that we have REQ_OP_WRITE_ZEROES implemented for all devices that support efficient zeroing, we can remove the call to blkdev_issue_discard. This means we only have two ways of zeroing left and can simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a new BLKDEV_ZERO_NOFALLBACK flagChristoph Hellwig
This avoids fallbacks to explicit zeroing in (__)blkdev_issue_zeroout if the caller doesn't want them. Also clean up the convoluted check for the return condition that this new flag is added to. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a REQ_NOUNMAP flag for REQ_OP_WRITE_ZEROESChristoph Hellwig
If this flag is set logical provisioning capable device should release space for the zeroed blocks if possible, if it is not set devices should keep the blocks anchored. Also remove an out of sync kerneldoc comment for a static function that would have become even more out of data with this change. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a flags argument to (__)blkdev_issue_zerooutChristoph Hellwig
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with similar semantics, but without referring to diѕcard. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: stop using blkdev_issue_write_same for zeroingChristoph Hellwig
We'll always use the WRITE ZEROES code for zeroing now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-24block: correct documentation for blkdev_issue_discard() flagsEric Biggers
BLKDEV_IFL_* flags no longer exist; blkdev_issue_discard() now actually takes BLKDEV_DISCARD_* flags. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06block: don't try Write Same from __blkdev_issue_zerooutChristoph Hellwig
Write Same can return an error asynchronously if it turns out the underlying SCSI device does not support Write Same, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a Write Same from blkdev_issue_zeroout an don't try it at all from __blkdev_issue_zeroout as a non-invasive workaround. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-13block: don't try to discard from __blkdev_issue_zerooutChristoph Hellwig
Discard can return -EIO asynchronously if the alignment for the request isn't suitable for the driver, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a sync discard from blkdev_issue_zeroout an don't try discard at all from __blkdev_issue_zeroout as a non-invasive workaround. One more reason why abusing discard for zeroing must die.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Eryu Guan <eguan@redhat.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-09block: improve handling of the magic discard payloadChristoph Hellwig
Instead of allocating a single unused biovec for discard requests, send them down without any payload. Instead we allow the driver to add a "special" payload using a biovec embedded into struct request (unioned over other fields never used while in the driver), and overloading the number of segments for this case. This has a couple of advantages: - we don't have to allocate the bio_vec - the amount of special casing for discard requests in the block layer is significantly reduced - using this same scheme for other request types is trivial, which will be important for implementing the new WRITE_ZEROES op on devices where it actually requires a payload (e.g. SCSI) - we can get rid of playing games with the request length, as we'll never touch it and completions will work just fine - it will allow us to support ranged discard operations in the future by merging non-contiguous discard bios into a single request - last but not least it removes a lot of code This patch is the common base for my WIP series for ranges discards and to remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES, so it would be good to get it in quickly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add async variant of blkdev_issue_zerooutChaitanya Kulkarni
Similar to __blkdev_issue_discard this variant allows submitting the final bio asynchronously and chaining multiple ranges into a single completion. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28block: better op and flags encodingChristoph Hellwig
Now that we don't need the common flags to overflow outside the range of a 32-bit type we can encode them the same way for both the bio and request fields. This in addition allows us to place the operation first (and make some room for more ops while we're at it) and to stop having to shift around the operation values. In addition this allows passing around only one value in the block layer instead of two (and eventuall also in the file systems, but we can do that later) and thus clean up a lot of code. Last but not least this allows decreasing the size of the cmd_flags field in struct request to 32-bits. Various functions passing this value could also be updated, but I'd like to avoid the churn for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-11block: require write_same and discard requests align to logical block sizeDarrick J. Wong
Make sure that the offset and length arguments that we're using to construct WRITE SAME and DISCARD requests are actually aligned to the logical block size. Failure to do this causes other errors in other parts of the block layer or the SCSI layer because disks don't support partial logical block writes. Link: http://lkml.kernel.org/r/147518379026.22791.4437508871355153928.stgit@birch.djwong.org Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header Cc: Brian Foster <bfoster@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-20block: don't ignore -EOPNOTSUPP blkdev_issue_write_sameChristoph Hellwig
WRITE SAME is a data integrity operation and we can't simply ignore errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20block: introduce BLKDEV_DISCARD_ZERO to fix zerooutChristoph Hellwig
Currently blkdev_issue_zeroout cascades down from discards (if the driver guarantees that discards zero data), to WRITE SAME and then to a loop writing zeroes. Unfortunately we ignore run-time EOPNOTSUPP errors in the block layer blkdev_issue_discard helper to work around DM volumes that may have mixed discard support underneath. This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to blkdev_issue_discard that indicates we are called for zeroing operation. This allows both to ignore the EOPNOTSUPP hack and actually consolidating the discard_zeroes_data check into the function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09block: add a separate operation type for secure eraseChristoph Hellwig
Instead of overloading the discard support with the REQ_SECURE flag. Use the opportunity to rename the queue flag as well, and remove the dead checks for this flag in the RAID 1 and RAID 10 drivers that don't claim support for secure erase. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block discard: use bio set op accessorMike Christie
This converts the block issue discard helper and users to use the bio_set_op_attrs accessor and only pass in the operation flags like REQ_SEQURE. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block: missing bio_put following submit_bio_waitShaun Tancheff
submit_bio_wait() gives the caller an opportunity to examine struct bio and so expects the caller to issue the put_bio() This fixes a memory leak reported by a few people in 4.7-rc2 kmemleak report after 9082e87bfbf8 ("block: remove struct bio_batch") Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Larry Finger@lwfinger.net Tested-by: David Drysdale <drysdale@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-05block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discardMike Snitzer
Commit 38f25255330 ("block: add __blkdev_issue_discard") incorrectly disallowed the early return of -EOPNOTSUPP if the device doesn't support discard (or secure discard). This early return of -EOPNOTSUPP has always been part of blkdev_issue_discard() interface so there isn't a good reason to break that behaviour -- especially when it can be easily reinstated. The nuance of allowing early return of -EOPNOTSUPP vs disallowing late return of -EOPNOTSUPP is: if the overall device never advertised support for discards and one is issued to the device it is beneficial to inform the caller that discards are not supported via -EOPNOTSUPP. But if a device advertises discard support it means that at least a subset of the device does have discard support -- but it could be that discards issued to some regions of a stacked device will not be supported. In that case the late return of -EOPNOTSUPP must be disallowed. Fixes: 38f25255330 ("block: add __blkdev_issue_discard") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: add __blkdev_issue_discardChristoph Hellwig
This is a version of blkdev_issue_discard which doesn't wait for the I/O to complete, but instead allows the caller to submit the final bio and/or chain it to others. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: remove struct bio_batchChristoph Hellwig
It can be replaced with a combination of bio_chain and submit_bio_wait. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-28block: re-add discard_granularity and alignment checksMing Lin
In commit b49a087("block: remove split code in blkdev_issue_{discard,write_same}"), discard_granularity and alignment checks were removed. Ideally, with bio late splitting, the upper layers shouldn't need to depend on device's limits. Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe device when mkfs.xfs. We have not found the root cause yet. This patch re-adds discard_granularity and alignment checks by reverting the related changes in commit b49a087. The good thing is now we can remove the 2G discard size cap and just use UINT_MAX to avoid bi_size overflow. Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13block: remove split code in blkdev_issue_{discard,write_same}Ming Lin
The split code in blkdev_issue_{discard,write_same} can go away now that any driver that cares does the split. We have to make sure bio size doesn't overflow. For discard, we set max discard sectors to (1<<31)>>9 to ensure it doesn't overflow bi_size and hopefully it is of the proper granularity as long as the granularity is a power of two. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-05block: Quiesce zeroout wrapperMartin K. Petersen
blkdev_issue_zeroout() printed a warning if a device failed a discard or write same request despite advertising support for these. That's fine for SCSI since we'll disable these commands if we get an error back from the disk saying that they are not supported. And consequently the warning only gets printed once. There are other types of block devices that support discard, however, and these may return -EOPNOTSUPP for each command but leave discard enabled in the queue limits. This will cause a warning message for every blkdev_issue_zeroout() invocation. Remove the offending warning messages. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>