summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-03-10arm64: support keyctl() system call in 32-bit modeEric Biggers
As is the case for a number of other architectures that have a 32-bit compat mode, enable KEYS_COMPAT if both COMPAT and KEYS are enabled. This allows AArch32 programs to use the keyctl() system call when running on an AArch64 kernel. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-10arm64: kasan: avoid bad virt_to_pfn()Mark Rutland
Booting a v4.11-rc1 kernel with DEBUG_VIRTUAL and KASAN enabled produces the following splat (trimmed for brevity): [ 0.000000] virt_to_phys used for non-linear address: ffff200008080000 (0xffff200008080000) [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:14 __virt_to_phys+0x48/0x70 [ 0.000000] PC is at __virt_to_phys+0x48/0x70 [ 0.000000] LR is at __virt_to_phys+0x48/0x70 [ 0.000000] Call trace: [ 0.000000] [<ffff2000080b1ac0>] __virt_to_phys+0x48/0x70 [ 0.000000] [<ffff20000a03b86c>] kasan_init+0x1c0/0x498 [ 0.000000] [<ffff20000a034018>] setup_arch+0x2fc/0x948 [ 0.000000] [<ffff20000a030c68>] start_kernel+0xb8/0x570 [ 0.000000] [<ffff20000a0301e8>] __primary_switched+0x6c/0x74 This is because we use virt_to_pfn() on a kernel image address when trying to figure out its nid, so that we can allocate its shadow from the same node. As with other recent changes, this patch uses lm_alias() to solve this. We could instead use NUMA_NO_NODE, as x86 does for all shadow allocations, though we'll likely want the "real" memory shadow to be backed from its corresponding nid anyway, so we may as well be consistent and find the nid for the image shadow. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-10arm64: kprobes: remove kprobe_exceptions_notifyNaveen N. Rao
Commit fc62d0207ae0 ("kprobes: Introduce weak variant of kprobe_exceptions_notify()") introduces a generic empty version of the function for architectures that don't need special handling, like arm64. As such, remove the arch/arm64/ specific handler. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-10Merge branch 'prep-for-5level'Linus Torvalds
Merge 5-level page table prep from Kirill Shutemov: "Here's relatively low-risk part of 5-level paging patchset. Merging it now will make x86 5-level paging enabling in v4.12 easier. The first patch is actually x86-specific: detect 5-level paging support. It boils down to single define. The rest of patchset converts Linux MMU abstraction from 4- to 5-level paging. Enabling of new abstraction in most cases requires adding single line of code in arch-specific code. The rest is taken care by asm-generic/. Changes to mm/ code are mostly mechanical: add support for new page table level -- p4d_t -- where we deal with pud_t now. v2: - fix build on microblaze (Michal); - comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow(); - acks from Michal" * emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>: mm: introduce __p4d_alloc() mm: convert generic code to 5-level paging asm-generic: introduce <asm-generic/pgtable-nop4d.h> arch, mm: convert all architectures to use 5level-fixup.h asm-generic: introduce __ARCH_USE_5LEVEL_HACK asm-generic: introduce 5level-fixup.h x86/cpufeature: Add 5-level paging detection
2017-03-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "26 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits) userfaultfd: remove wrong comment from userfaultfd_ctx_get() fat: fix using uninitialized fields of fat_inode/fsinfo_inode sh: cayman: IDE support fix kasan: fix races in quarantine_remove_cache() kasan: resched in quarantine_remove_cache() mm: do not call mem_cgroup_free() from within mem_cgroup_alloc() thp: fix another corner case of munlock() vs. THPs rmap: fix NULL-pointer dereference on THP munlocking mm/memblock.c: fix memblock_next_valid_pfn() userfaultfd: selftest: vm: allow to build in vm/ directory userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED userfaultfd: non-cooperative: fix fork fctx->new memleak mm/cgroup: avoid panic when init with low memory drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h mm/vmstats: add thp_split_pud event for clarity include/linux/fs.h: fix unsigned enum warning with gcc-4.2 userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete userfaultfd: non-cooperative: robustness check userfaultfd: non-cooperative: rollback userfaultfd_exit x86, mm: unify exit paths in gup_pte_range() ...
2017-03-10x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirkMatjaz Hegedic
The reboot quirk for ASUS EeeBook X205TA contains a typo in DMI_PRODUCT_NAME, improperly referring to X205TAW instead of X205TA, which prevents the quirk from being triggered. The model X205TAW already has a reboot quirk of its own. This fix simply removes the inappropriate final letter W. Fixes: 90b28ded88dd ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk") Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-10ARM: wire up statx syscallRussell King
Wire up the new statx syscall for ARM. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-03-10powerpc/64s: POWER9 machine check handlerNicholas Piggin
Add POWER9 machine check handler. There are several new types of errors added, so logging messages for those are also added. This doesn't attempt to reuse any of the P7/8 defines or functions, because that becomes too complex. The better option in future is to use a table driven approach. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-10powerpc/64s: allow machine check handler to set severity and initiatorNicholas Piggin
Currently severity and initiator are always set to MCE_SEV_ERROR_SYNC and MCE_INITIATOR_CPU in the core mce code. Allow them to be set by the machine specific mce handlers. No functional change for existing handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-10powerpc/64s: fix handling of non-synchronous machine checksNicholas Piggin
A synchronous machine check is an exception raised by the attempt to execute the current instruction. If the error can't be corrected, it can make sense to SIGBUS the currently running process. In other cases, the error condition is not related to the current instruction, so killing the current process is not the right thing to do. Today, all machine checks are MCE_SEV_ERROR_SYNC, so this has no practical change. It will be used to handle POWER9 asynchronous machine checks. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09sh: cayman: IDE support fixBartlomiej Zolnierkiewicz
Remove incorrect CONFIG_IDE ifdef (CONFIG_IDE config option is for internal drivers/ide/ use) and make IDE hardware interface always initialized (not only when IDE subsystem is built-in). This patch allows Cayman board to work with modular IDE subsystem support and removes the requirement of having the whole core IDE subsystem built-in when using libata PATA support. Link: http://lkml.kernel.org/r/1990884.yFoE6lSB9G@amdc3058 Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09x86, mm: unify exit paths in gup_pte_range()Dan Williams
All exit paths from gup_pte_range() require pte_unmap() of the original pte page before returning. Refactor the code to have a single exit point to do the unmap. This mirrors the flow of the generic gup_pte_range() in mm/gup.c. Link: http://lkml.kernel.org/r/148804251828.36605.14910389618497006945.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09x86, mm: fix gup_pte_range() vs DAX mappingsDan Williams
gup_pte_range() fails to check pte_allows_gup() before translating a DAX pte entry, pte_devmap(), to a page. This allows writes to read-only mappings, and bypasses the DAX cacheline dirty tracking due to missed 'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path correctly check pte_allows_gup() before checking for _devmap() entries. Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09power/mm: update pte_write and pte_wrprotect to handle savedwriteAneesh Kumar K.V
We use pte_write() to check whethwer the pte entry is writable. This is mostly used to later mark the pte read only if it is writable. The other use of pte_write() is to check whether the pte_entry is writable so that hardware page table entry can be marked accordingly. This is used in kvm where we look at qemu page table entry and update hardware hash page table for the guest with correct write enable bit. With the above, for the first usage we should also check the savedwrite bit so that we can correctly clear the savedwite bit. For the later, we add a new variant __pte_write(). With this we can revert write_protect_page part of 595cd8f256d2 ("mm/ksm: handle protnone saved writes when making page write protect"). But I left it as it is as an example code for savedwrite check. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09powerpc/mm: handle protnone ptes on forkAneesh Kumar K.V
We need to mark pages of parent process read only on fork. Numa fault pte needs a protnone ptes variant with saved write flag set. On fork we need to make sure we remove the saved write bit. Instead of adding the protnone check in the caller update ptep_set_wrprotect variants to clear savedwrite bit. Without this we see random segfaults in application on fork. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Sending this a bit sooner than I otherwise would have, as a fix in the merge window had some unfortunate issues and side effects for some folks. This contains: - Fixes from Jan for the bdi registration/unregistration. These have been tested by the various parties reporting issues, and should be solid at this point. - Also from Jan, fix for axonram gendisk registration. - A stable fix for zram from Johannes. - A small series from Ming, fixing up some long standing issues with blk-mq hardware queue kobject initialization and registration. - A fix for sed opal from Jon, fixing a nonsensical range check and some set-but-not-used variables. - A fix from Neil for a long standing deadlock issue for stacking device drivers. With this in place, dm/md don't have to work around the issue anymore, and can be properly fixed up" * 'for-linus' of git://git.kernel.dk/linux-block: axonram: Fix gendisk handling blk: improve order of bio handling in generic_make_request() Revert "scsi, block: fix duplicate bdi name registration crashes" block: Make del_gendisk() safer for disks without queues bdi: Fix use-after-free in wb_congested_put() block: Allow bdi re-registration block/sed: Fix opal user range check and unused variables zram: set physical queue limits to avoid array out of bounds accesses blk-mq: free hctx->cpumask in release handler of hctx's kobject blk-mq: make lifetime consistent between hctx and its kobject blk-mq: make lifetime consitent between q/ctx and its kobject blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
2017-03-09s390: wire up statx system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-09Merge tag 'for-linus-4.11-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix and cleanup from Juergen Gross: "This contains one fix for MSIX handling under Xen and a trivial cleanup patch" * tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xenbus: Remove duplicate inclusion of linux/init.h xen: do not re-use pirq number cached in pci device msi msg data
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09x86/cpufeature: Add 5-level paging detectionKirill A. Shutemov
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level paging. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09Merge tag 'kvm-arm-for-4.11-rc2' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.11-rc2 vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems
2017-03-09KVM: nVMX: do not warn when MSR bitmap address is not backedRadim Krčmář
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-09powerpc/powernv/ioda2: Update iommu table base on ownership changeAlexey Kardashevskiy
On POWERNV platform, in order to do DMA via IOMMU (i.e. 32bit DMA in our case), a device needs an iommu_table pointer set via set_iommu_table_base(). The codeflow is: - pnv_pci_ioda2_setup_dma_pe() - pnv_pci_ioda2_setup_default_config() - pnv_ioda_setup_bus_dma() [1] pnv_pci_ioda2_setup_dma_pe() creates IOMMU groups, pnv_pci_ioda2_setup_default_config() does default DMA setup, pnv_ioda_setup_bus_dma() takes a bus PE (on IODA2, all physical function PEs as bus PEs except NPU), walks through all underlying buses and devices, adds all devices to an IOMMU group and sets iommu_table. On IODA2, when VFIO is used, it takes ownership over a PE which means it removes all tables and creates new ones (with a possibility of sharing them among PEs). So when the ownership is returned from VFIO to the kernel, the iommu_table pointer written to a device at [1] is stale and needs an update. This adds an "add_to_group" parameter to pnv_ioda_setup_bus_dma() (in fact re-adds as it used to be there a while ago for different reasons) to tell the helper if a device needs to be added to an IOMMU group with an iommu_table update or just the latter. This calls pnv_ioda_setup_bus_dma(..., false) from pnv_ioda2_release_ownership() so when the ownership is restored, 32bit DMA can work again for a device. This does the same thing on obtaining ownership as the iommu_table point is stale at this point anyway and it is safer to have NULL there. We did not hit this earlier as all tested devices in recent years were only using 64bit DMA; the rare exception for this is MPT3 SAS adapter which uses both 32bit and 64bit DMA access and it has not been tested with VFIO much. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09KVM: arm64: Increase number of user memslots to 512Linu Cherian
Having only 32 memslots is a real constraint for the maximum number of PCI devices that can be assigned to a single guest. Assuming each PCI device/virtual function having two memory BAR regions, we could assign only 15 devices/virtual functions to a guest. Hence increase KVM_USER_MEM_SLOTS to 512 as done in other archs like powerpc. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unusedLinu Cherian
arm/arm64 architecture doesnt use private memslots, hence removing KVM_PRIVATE_MEM_SLOTS macro definition. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64Linu Cherian
Return KVM_USER_MEM_SLOTS for userspace capability query on NR_MEMSLOTS. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requestedAlexey Kardashevskiy
The IODA2 specification says that a 64 DMA address cannot use top 4 bits (3 are reserved and one is a "TVE select"); bottom page_shift bits cannot be used for multilevel table addressing either. The existing IODA2 table allocation code aligns the minimum TCE table size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages, we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs 13 bits, the maximum number of levels is 48/13 = 3 so we physically cannot address more and EEH happens on DMA accesses. This adds a check that too many levels were requested. It is still possible to have 5 levels in the case of 4K system page size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09powerpc/perf: Handle sdar_mode for marked event in power9Madhavan Srinivasan
MMCRA[SDAR_MODE] specifices how the SDAR should be updated in continous sampling mode. On P9 it must be set to 0b00 when MMCRA[63] is set. Fixes: c7c3f568beff2 ('powerpc/perf: macros for power9 format encoding') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09powerpc/perf: Fix perf_get_data_addr() for power9 DD1Madhavan Srinivasan
Power9 DD1 do not support PMU_HAS_SIER flag and sdsync in perf_get_data_addr() defaults to MMCRA_SDSYNC which is wrong. Since power9 MMCRA does not support SDSYNC bit, patch includes PPMU_NO_SIAR flag to the check and set the sdsync with MMCRA_SAMPLE_ENABLE; Fixes: 27593d72c4ad ("powerpc/perf: Use MSR to report privilege level on P9 DD1") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-08axonram: Fix gendisk handlingJan Kara
It is invalid to call del_gendisk() when disk->queue is NULL. Fix error handling in axon_ram_probe() to avoid doing that. Also del_gendisk() does not drop a reference to gendisk allocated by alloc_disk(). That has to be done by put_disk(). Add that call where needed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08MIPS: Add missing include filesArnd Bergmann
After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-08crypto: powerpc - Fix initialisation of crc32c contextDaniel Axtens
Turning on crypto self-tests on a POWER8 shows: alg: hash: Test 1 failed for crc32c-vpmsum 00000000: ff ff ff ff Comparing the code with the Intel CRC32c implementation on which ours is based shows that we are doing an init with 0, not ~0 as CRC32c requires. This probably wasn't caught because btrfs does its own weird open-coded initialisation. Initialise our internal context to ~0 on init. This makes the self-tests pass, and btrfs continues to work. Fixes: 6dd7a82cc54e ("crypto: powerpc - Add POWER8 optimised crc32c") Cc: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-08powerpc/boot: Fix zImage TOC alignmentMichael Ellerman
Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in the zImage linker script, otherwise pointers to our TOC variables (__toc_start) could be incorrect. If the actual start of the TOC and __toc_start don't have the same value we crash early in the zImage wrapper. Cc: stable@vger.kernel.org Suggested-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and minor updates all over the place: - an SGI/UV fix - a defconfig update - a build warning fix - move the boot_params file to the arch location in debugfs - a pkeys fix - selftests fix - boot message fixes - sparse fixes - a resume warning fix - ioapic hotplug fixes - reboot quirks ... plus various minor cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build/x86_64_defconfig: Enable CONFIG_R8169 x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk x86/hpet: Prevent might sleep splat on resume x86/boot: Correct setup_header.start_sys name x86/purgatory: Fix sparse warning, symbol not declared x86/purgatory: Make functions and variables static x86/events: Remove last remnants of old filenames x86/pkeys: Check against max pkey to avoid overflows x86/ioapic: Split IOAPIC hot-removal into two steps x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h x86/vmware: Remove duplicate inclusion of asm/timer.h x86/hyperv: Hide unused label x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register x86/selftests: Add clobbers for int80 on x86_64 x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR() x86/apic: Fix a warning message in logical CPU IDs allocation x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/
2017-03-07Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A fix for KVM's scheduler clock which (erroneously) was always marked unstable, a fix for RT/DL load balancing, plus latency fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface sched/core: Fix pick_next_task() for RT,DL sched/fair: Make select_idle_cpu() more aggressive
2017-03-07Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This includes a fix for a crash if certain special addresses are kprobed, plus does a rename of two Kconfig variables that were a minor misnomer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed
2017-03-07Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "A couple of sched.h splitup related build fixes, plus an objtool fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix another GCC jump table detection issue drivers/char/nwbutton: Fix build breakage caused by include file reshuffling h8300: Fix build breakage caused by header file changes avr32: Fix build error caused by include file reshuffling
2017-03-07Merge tag 'powerpc-4.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Five fairly small fixes for things that went in this cycle. A fairly large patch to rework the CAS logic on Power9, necessitated by a late change to the firmware API, and we can't boot without it. Three fixes going to stable, allowing more instructions to be emulated on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the OPAL XICS workaround. And a patch from me to sort the selects under CONFIG PPC. Annoying churn, but worth it in the long run, and best for it to go in now to avoid conflicts. Thanks to: Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R. Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh" * tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Sort the selects under CONFIG_PPC powerpc/64: Fix L1D cache shape vector reporting L1I values powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info() powerpc: Update to new option-vector-5 format for CAS powerpc: Parse the command line before calling CAS powerpc/xics: Work around limitations of OPAL XICS priority handling powerpc/64: Fix checksum folding in csum_add() powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n powerpc/booke: Fix boot crash due to null hugepd powerpc: Fix compiling a BE kernel with a powerpc64le toolchain selftest/powerpc: Fix false failures for skipped tests powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop powerpc/64: Invalidate process table caching after setting process table powerpc: emulate_step() tests for load/store instructions powerpc: Emulation support for load/store instructions on LE
2017-03-07Merge branch 'stable/for-linus-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two tiny implementations of the DMA API for callback in ARM (for Xen)" * 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: implement xen_swiotlb_get_sgtable callback swiotlb-xen: implement xen_swiotlb_dma_mmap callback
2017-03-07arm64: KVM: Survive unknown traps from guestsMark Rutland
Currently we BUG() if we see an ESR_EL2.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0487A.k_iss10775, page D7-1937, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07arm: KVM: Survive unknown traps from guestsMark Rutland
Currently we BUG() if we see a HSR.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently unallocated HSR EC encodings are reserved, and per ARM DDI 0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07KVM: nVMX: reset nested_run_pending if the vCPU is going to be resetWanpeng Li
Reported by syzkaller: WARNING: CPU: 1 PID: 27742 at arch/x86/kvm/vmx.c:11029 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 CPU: 1 PID: 27742 Comm: a.out Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 vmx_leave_nested arch/x86/kvm/vmx.c:11136 [inline] vmx_set_msr+0x1565/0x1910 arch/x86/kvm/vmx.c:3324 kvm_set_msr+0xd4/0x170 arch/x86/kvm/x86.c:1099 do_set_msr+0x11e/0x190 arch/x86/kvm/x86.c:1128 __msr_io arch/x86/kvm/x86.c:2577 [inline] msr_io+0x24b/0x450 arch/x86/kvm/x86.c:2614 kvm_arch_vcpu_ioctl+0x35b/0x46a0 arch/x86/kvm/x86.c:3497 kvm_vcpu_ioctl+0x232/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2721 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x1bf/0x1790 fs/ioctl.c:683 SYSC_ioctl fs/ioctl.c:698 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:689 entry_SYSCALL_64_fastpath+0x1f/0xc2 The syzkaller folks reported a nested_run_pending warning during userspace clear VMX capability which is exposed to L1 before. The warning gets thrown while doing (*(uint32_t*)0x20aecfe8 = (uint32_t)0x1); (*(uint32_t*)0x20aecfec = (uint32_t)0x0); (*(uint32_t*)0x20aecff0 = (uint32_t)0x3a); (*(uint32_t*)0x20aecff4 = (uint32_t)0x0); (*(uint64_t*)0x20aecff8 = (uint64_t)0x0); r[29] = syscall(__NR_ioctl, r[4], 0x4008ae89ul, 0x20aecfe8ul, 0, 0, 0, 0, 0, 0); i.e. KVM_SET_MSR ioctl with struct kvm_msrs { .nmsrs = 1, .pad = 0, .entries = { {.index = MSR_IA32_FEATURE_CONTROL, .reserved = 0, .data = 0} } } The VMLANCH/VMRESUME emulation should be stopped since the CPU is going to reset here. This patch resets the nested_run_pending since the CPU is going to be reset hence there should be nothing pending. Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-07irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065Shanker Donthineni
On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07h8300: Fix build breakage caused by header file changesGuenter Roeck
Fix the following h8300 build failures: arch/h8300/kernel/ptrace_h.c: In function ‘trace_trap’: arch/h8300/kernel/ptrace_h.c:253:3: error: implicit declaration of function ‘force_sig’ Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp Fixes: c3edc4010e9d ("sched/headers: Move task_struct::signal and ...") Link: http://lkml.kernel.org/r/1488738434-3504-1-git-send-email-linux@roeck-us.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-07avr32: Fix build error caused by include file reshufflingGuenter Roeck
Various avr32 builds fail: arch/avr32/oprofile/backtrace.c:58: error: dereferencing pointer to incomplete type arch/avr32/oprofile/backtrace.c:60: error: implicit declaration of function 'user_mode' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Fixes: f780d89a0e82 ("sched/headers: Remove <asm/ptrace.h> from ...") Link: http://lkml.kernel.org/r/1488762357-4500-1-git-send-email-linux@roeck-us.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-06kvm: nVMX: VMCLEAR should not cause the vCPU to shut downJim Mattson
VMCLEAR should silently ignore a failure to clear the launch state of the VMCS referenced by the operand. Signed-off-by: Jim Mattson <jmattson@google.com> [Changed "kvm_write_guest(vcpu->kvm" to "kvm_vcpu_write_guest(vcpu".] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-06powerpc: Sort the selects under CONFIG_PPCMichael Ellerman
We have a big list of selects under CONFIG_PPC, and currently they're completely unsorted. This means people tend to add new selects at the bottom of the list, and so two commits which both add a new select will often conflict. Instead sort it alphabetically. This is nicer in and of itself, but also means two commits that add a new select will have a greater chance of not conflicting. Add a note at the top and bottom asking people to keep it sorted. And while we're here pad out the 'if' expressions to make them stand out. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-06powerpc/64: Fix L1D cache shape vector reporting L1I valuesMichael Ellerman
It seems we didn't pay quite enough attention when testing the new cache shape vectors, which means we didn't notice the bug where the vector for the L1D was using the L1I values. Fix it, resulting in eg: L1I cache size: 0x8000 32768B 32K L1I line size: 0x80 8-way associative L1D cache size: 0x10000 65536B 64K L1D line size: 0x80 8-way associative Fixes: 98a5f361b862 ("powerpc: Add new cache geometry aux vectors") Cut-and-paste-bug-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Badly-reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-06x86/build/x86_64_defconfig: Enable CONFIG_R8169Andy Shevchenko
Very common PCIe ethernet card. Already enabled in i386_defconfig. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/20170306085748.85957-1-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 10:50:50 +0000