summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-04-09Merge tag 'qcom-dts-for-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.13 This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger for the two devices. * tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-klte: Add bluetooth support ARM: dts: qcom: msm8974: add blsp2_uart8 ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: clps711x: fix missing interrupt parentArnd Bergmann
The kernelci.org bot reports a build time regression: arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent There is only one interrupt controller in this SoC, so I assume this is the parent. Fixes: 2bd86203acf3 ("ARM: dts: clps711x: Add keypad node") Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09ARM: dts: mvebu: fix SPI device nodeArnd Bergmann
dtc warns about a mismatched address: arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1" I assume the "reg" property is correct here, so adjust the unit address accordingly. Fixes: c6dfc019c239 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'bmc-5.13-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt BMC device tree updates for 5.13 The ASPEED and Nuvoton pull request now comes as a combined BMC pull request. - New machines * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX system * Quanta GBS, an NPCM730 BMC for an x86 server - Power10 BMC updates for Everest and Rainier - GPIO line names for Mihawk * tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits) ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree ARM: dts: aspeed: mihawk: Add GPIO line names ARM: dts: aspeed: Add Rainier 1S4U machine ARM: dts: aspeed: everest: Add size/address cells ARM: dts: aspeed: everest: Enable fan watchdog ARM: dts: aspeed: everest: Add RTC ARM: dts: aspeed: everest: GPIOs support ARM: dts: aspeed: everest: Add UCD90320 power sequencer ARM: dts: aspeed: everest: Add power supply i2c devices ARM: dts: aspeed: everest: Add pca9552 fan presence ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines ARM: dts: aspeed: everest: Add max31785 fan controller device ARM: dts: aspeed: everest: Add I2C components ARM: dts: aspeed: rainier 4U: Fix fan configuration ARM: dts: aspeed: rainier: Add missing fan nodes ARM: dts: aspeed: rainier: Enable fan watchdog ARM: dts: aspeed: rainier: Add presence GPIOs ARM: dts: aspeed: rainier: Add additional processor CFAMs ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans ARM: dts: aspeed: rainier: Add directly controlled LEDs ... Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMICCristian Ciocaltea
Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V' dummy regulator used for the uSD supply. Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/2e0a2931ae3757f016948e7c78e8e54afa325ae0.1615538629.git.cristian.ciocaltea@gmail.com Link: https://lore.kernel.org/r/20210408062232.3575-1-mani@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'mvebu-dt-5.13-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.13 (part 1) Add support for ATL-x530 Board (Armada 38x based) * tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for ATL-x530 Board Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08ARM: dts: nuvoton: Add Quanta GBS BMC Device TreeGeorge Hung
Add the device tree for the Quanta GBS BMC based on NPCM730 SoC. Signed-off-by: George Hung <george.hung@quantatw.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330071336.18370-1-george.hung@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: mihawk: Add GPIO line namesNichole Wang
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, not the net or ball name. This makes it easier to share userspace code across different systems and makes the use of the lines more obvious. Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210330020808.830-1-Nichole_Wang@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add Rainier 1S4U machineEddie James
The 1S4U version of the Rainier system has only 4 fans. Create a new tree, include the 4U version, and delete the 2 extra fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add size/address cellsJoel Stanley
The gpio and fan nodes reg properties cause dtc to emit a noisy warning about relying on default sizes. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Enable fan watchdogEddie James
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add RTCEddie James
Add the RTC at the appropriate I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: GPIOs supportAlpana Kumari
This commit adds support for- - Presence GPIOs - I2C control GPIOs - Op-panel GPIOs (ex PHR) Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add UCD90320 power sequencerJim Wright
Add UCD90320 chip to Everest device tree. Signed-off-by: Jim Wright <jlwright@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add power supply i2c devicesBrandon Wyman
Add the i2c/pmbus power supply devices to the everest device tree. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add pca9552 fan presenceMatthew Barth
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the 4 GPIO fan presence inputs. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add FSI CFAMs and re-number enginesEddie James
Add additional CFAMs and re-number the existing engines for the extra processors present on the Everest system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add max31785 fan controller deviceMatthew Barth
Add the max31785 configuration at address 0x52 on i2c14 behind mux0 channel 3. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add I2C componentsPriyanga Ramasamy
Tested and able to bound the devices with i2c driver. Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier 4U: Fix fan configurationEddie James
The 4U fans didn't have the correct properties since the fan nodes were redefined. Fix this by referencing each fan individually and adding the differences to the 4U fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add missing fan nodesJoel Stanley
The Maxim fan controller has six fans attached. Two of these were missing from the description. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Enable fan watchdogEddie James
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add presence GPIOsAlpana Kumari
This commit adds presence detect GPIO chips for various FRUs on Rainier. Also, correct the I2C address for the tca9554. Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add additional processor CFAMsEddie James
Rainier has two dual-chip modules and therefore four CFAMs with their associated engines. Add these to the devicetree with the i2c busses that have devices on them. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add gpio-keys-polled for fansBrandon Wyman
Add a gpio-keys-polled section to the Rainier device tree for the fan presence signals on the PCA9552 I2C device on bus 7. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add directly controlled LEDsVishwanatha Subbanna
These LEDs are directly connected to the BMC's GPIO bank. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add ASRock E3C246D4I BMCZev Weiss
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series mini-ITX board that we hope can provide a decent platform for OpenBMC development. This initial device-tree provides the necessary configuration for basic BMC functionality such as host power control, serial console and KVM support, and POST code snooping. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-07ARM: dts: mvebu: Add device tree for ATL-x530 BoardAryan Srivastava
Add device tree file for x530 board. This has an Armada 385 SoC. Has NAND-flash for user storage and SPI for booting. Covers majority of x530 and GS980MX variants. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-07Merge tag 'at91-dt-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 dt for 5.13: - two little fixes (typo, W=1) - a change in gpio button keycode for recent boards * tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: add ETB and ETM unit name ARM: dts: at91: change the key code of the gpio key ARM: dts: at91: Fix a typo Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'samsung-dt64-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.13 Two cleanups in DTS without expected impact. * tag 'samsung-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: white-space cleanups arm64: dts: exynos: re-order Slim SSS clocks to match dtschema Link: https://lore.kernel.org/r/20210407065828.7213-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'samsung-dt-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.13 1. Configure battery charger and front camera on GT-I9100 phone. 2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags to match real type of interrupt coming from the device. 3. Correct DTS with dtschema. This brings back the commit adding input clock to CMU in Exynos4412 Odroid which was reverted some time ago due to unsupported deferred probes (now supported and tested). * tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add front camera support to I9100 ARM: dts: exynos: white-space cleanups ARM: dts: exynos: replace deprecated NTC/Murata compatibles ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family ARM: dts: exynos: correct PMIC interrupt trigger level on Snow ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 ARM: dts: exynos: add charger supply for I9100 Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'omap-for-v5.13/dt-v2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.13 Mostly configures addtional devices for various boards, and updates the gpio line names for beagle boards so userspace can optionally find the right lines: - Use unique gpio line names for am335x-pocketbeagle - Update omap3-echo led configuration and add ath6kl node - Fix indentation for am3 tscadc node - Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing - Use unique gpio line names for am335x-boneblack.dts * tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack.dts: unique gpio-line-names ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing ARM: dts: am33xx-l4: fix tscadc@0 node indentation ARM: dts: omap3-echo: Add ath6kl node ARM: dts: omap3-echo: Update LED configuration ARM: dts: am335x-pocketbeagle: unique gpio-line-names Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.13 - new boards: MeCool KII & KIII, Minix NEO U9-H - used fixed index for MMC devices * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add initial device-tree for MeCool KIII Pro arm64: dts: meson: add initial device-tree for MeCool KII Pro dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings arm64: dts: amlogic: Assign a fixed index to mmc devices arm64: dts: meson: add initial device-tree for Minix NEO U9-H dt-bindings: arm: amlogic: add support for the Minix NEO U9-H Link: https://lore.kernel.org/r/7h5z10mjpp.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'ti-k3-dt-for-v5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Devicetree changes for TI K3 platforms for v5.13 merge window: * New SoCs: - AM642 mean for industrial control, motor control, remote IO, IoT gateway etc. * New Boards: - AM65: Siemens SIMATIC IOT2050 advanced and basic boards - AM64: EVM and SK boards * New peripherals: - AM65: watchdog - AM65,J721E: ICSSG - J7200: OSPI, GPIO * Fixes: - AM65: pcie node fixup, ospi speed updates - J721e, J7200: MMC speed updates, ospi speed updates and compatibles fixups. * tag 'ti-k3-dt-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (39 commits) arm64: dts: ti: k3-am64-main: Fix ospi compatible arm64: dts: ti: k3-j7200-mcu: Fix ospi compatible arm64: dts: ti: k3-j721e-mcu: Fix ospi compatible arm64: dts: ti: k3-j7200: Add support for higher speed modes and update delay select values for MMCSD subsystems arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules arm64: dts: ti: k3-j7200: Add gpio nodes arm64: dts: ti: k3-am642-evm/sk: Add IPC sub-mailbox nodes arm64: dts: ti: k3-am64-main: Add mailbox cluster nodes arm64: dts: ti: k3-am64-main: Add hwspinlock node arm64: dts: ti: k3-am642: reserve gpio in mcu domain for firmware usage arm64: dts: ti: k3-am64: Add GPIO DT nodes arm64: dts: ti: k3-am64-evm/sk: Add OSPI flash DT node arm64: dts: ti: k3-am64-main: Add OSPI node arm64: dts: ti: k3-am64-main: Add ADC nodes arm64: dts: ti: k3-am642-evm: Add USB support arm64: dts: ti: k3-am64-main: Add DT node for USB subsystem arm64: dts: ti: Add support for Siemens IOT2050 boards dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards dt-bindings: Add Siemens vendor prefix arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM ... Link: https://lore.kernel.org/r/20210405155336.smohb7uzkperqwuz@reflex Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add an empty chosen node to top level DTSIAlexander Shiyan
Missing "chosen" node can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: edb7211: Add unit-address to memory nodeAlexander Shiyan
The memory node requires a unit-address, add it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-4-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Fix serial port namesAlexander Shiyan
Preferred node name for serial ports is "serial". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-3-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add keypad nodeAlexander Shiyan
This adds missing keypad node to basic clps711x DT. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-2-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add SYSCON nodes where it is usedAlexander Shiyan
This patch adds SYSCON descriptors to framebuffer, SPI, DAI and modem control GPIO nodes to further rework these drivers to remove the call to the syscon_regmap_lookup_by_compatible() function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-1-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'qcom-arm64-for-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.13 This extends the initial SM8350 description merged in v5.12 with CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds initial PMIC definitions for the 6 PMICs found on the MTP and it introduces the new SM8350 Hardware Development Kit (HDK). SC7180 is further polished, the DisplayPort portion of the QMP phy is defined and several new SKUs of the Trogdor devices are introduced. The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI, CPU idle, SMMU and watchdog defined. SDM845 gains the camera related nodes and some cleanups. For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for chip select. * tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (79 commits) arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS arm64: dts: qcom: sm8250: further split of spi pinctrl config arm64: dts: qcom: sm8250: split spi pinctrl config arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node arm64: dts: qcom: sdm845: Add CAMSS ISP node arm64: dts: qcom: pm8150: Enable RTC arm64: dts: qcom: sm8350-mtp: Add PMICs arm64: dts: qcom: pmr735B: Add base dts file arm64: dts: qcom: pmr735a: Add base dts file arm64: dts: qcom: pm8350c: Add base dts file arm64: dts: qcom: pm8350b: Add base dts file arm64: dts: qcom: pm8350: Add base dts file arm64: dts: qcom: pmk8350: Add base dts file arm64: dts: qcom: sm8350: Add spmi node arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x dt-bindings: arm: qcom: Add SM8350 HDK arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges' ... Link: https://lore.kernel.org/r/20210404164914.712946-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'mvebu-dt64-5.13-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.13 (part 1) Add DT for fan control on SolidRun Clearfog GT8k platform Add syscon compatible to NB clk node allowing improving cpufreq support on Armada 37xx Add support for UTMI PHY allowing removing kernel dependency from the boot loader for UBS port connected to this PHY (Armada 7K, 8K and CN91xx) * tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: enable CP110 UTMI PHY usage arm64: dts: marvell: add support for Marvell CP110 UTMI PHY arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node arm64: dts: marvell: clearfog-gt-8k: add cooling maps arm64: dts: marvell: clearfog-gt-8k: add pwm-fan Link: https://lore.kernel.org/r/874kgocs7t.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'sunxi-dt-for-5.13-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - New secondary interrupt controller binding to support the wake-up - Use the RSB bus instead of I2C for the PMIC on the H6 - HDMI support for the BananaPi M2-Zero - New board: Topwise A721 * tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: h3: beelink-x2: Add power button arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out ARM: dts: sun4i: Add support for Topwise A721 tablet dt-bindings: arm: Add Topwise A721 arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc arm64: dts: allwinner: Use the new r_intc binding ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc ARM: dts: sunxi: h3/h5: Add r_intc node ARM: dts: sunxi: Use the new r_intc binding Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'renesas-arm-dt-for-v5.13-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.13 (take two) - Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC, - LED support for the Falcon development board, - Preparatory display pipeline support for the R-Car V3U SoC, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz arm64: dts: renesas: r8a779a0: Fix PMU interrupt arm64: dts: renesas: r8a779a0: Add VSPD support arm64: dts: renesas: r8a779a0: Add FCPVD support arm64: dts: renesas: falcon-cpu: Add GP LEDs arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: falcon: Move AVB0 to main DTS arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS arm64: dts: renesas: falcon: Move console config to CPU board DTS Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: at91: sama5d2: add ETB and ETM unit nameNicolas Ferre
Add unit address to the ETB and ETM nodes. It also allow us to get rid of the warnings: ../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning (unit_address_vs_reg): /etb: node has a reg or ranges property, but no unit name ../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning (unit_address_vs_reg): /etm: node has a reg or ranges property, but no unit name when we compile with W=1. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402170139.140595-1-nicolas.ferre@microchip.com
2021-04-07ARM: dts: at91: change the key code of the gpio keyLudovic Desroches
Having a button code and not a key code causes issues with libinput. udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug within libinput. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@microchip.com
2021-04-06ARM: dts: qcom: msm8974-klte: Add bluetooth supportAlexey Minnekhanov
Broadcom BCM4354 is used on Samsung Galaxy S5 phone on BLSP2 UART8 bus. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-2-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-06ARM: dts: qcom: msm8974: add blsp2_uart8Alexey Minnekhanov
Add blsp2_uart8 node in order to support bluetooth on the Samsung Galaxy S5 phone. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KIII ProChristian Hewitt
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference board with an S912 chip and the following specs: - 3GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x Update/Reset button (underside) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-4-christianshewitt@gmail.com
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KII ProChristian Hewitt
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference board with an S905D chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-3-christianshewitt@gmail.com
2021-04-04ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger levelKrzysztof Kozlowski
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: da8d46992e67 ("ARM: dts: qcom: msm8974-klte: Add fuel gauge") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Iskren Chernev <iskren.chernev@gmail.com> Tested-By: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210303182816.137255-2-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 21:56:48 +0000