summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-11-29s390/uapi: sort header export listHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-29s390/hypfs: add hypfs header file to uapi header export listHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-29s390: use generic asm-offsets.hHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-29s390: convert remaining bootmem allocations to memblockHeiko Carstens
Get rid of all remaining alloc_bootmem calls and use memblock_alloc instead everywhere. This way we get rid of the inconsistent mixture of alloc_bootmem and memblock_alloc usages. Two of the alloc_bootmem_low calls within arch/s390/kernel/setup.c are replaced with memblock_alloc calls that don't enforce that the allocated memory is below 2GB. This restriction was never necessary. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-25s390: fix kernel oops for CONFIG_MARCH_Z900=y buildsMartin Schwidefsky
The LAST_BREAK macro in entry.S uses a different instruction sequence for CONFIG_MARCH_Z900 builds. The branch target offset to skip the store of the last breaking event address needs to take the different length of the code block into account. Fixes: f8fc82b47149e344 ("s390: move sys_call_table and last_break from thread_info to thread_struct") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/pci: use unique UIDs for domain enumerationSebastian Ott
Use UIDs as domain numbers if the UID checking rules apply (in this case the FW guarantees uniqueness of these values). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390: update defconfigHeiko Carstens
Enable the contiguous memory allocator but set the default size to zero. If somebody wants to use the cma allocator the "cma=" kernel parameter has to be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390: add cma supportHeiko Carstens
In order to make the cma infrastructure usable we need to add a small architecture backend which calls dma_contiguous_reserve. Otherwise we would end up with the cma allocator enabled, but no pool where memory can be allocated from. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/cpumf: simplify psw generationHeiko Carstens
Use the psw_bits macro and simplify the code. The generated code is also better since it doesn't contain any conditional branches anymore. Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/thread_info: get rid of THREAD_ORDER defineHeiko Carstens
We have the s390 specific THREAD_ORDER define and the THREAD_SIZE_ORDER define which is also used in common code. Both have exactly the same semantics. Therefore get rid of THREAD_ORDER and always use THREAD_SIZE_ORDER instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-23s390/uaccess: make setfs macro return voidHeiko Carstens
For an unknown (historic) reason the s390 specific implementation of set_fs returns whatever the __ctl_load would return. The set_fs macro however is supposed to return void. Change the macro to do that. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-17s390/pci_dma: remove memset from dma_allocSebastian Ott
Get rid of a useless memset from dma_alloc. Users of dma_alloc who want zero initialized memory can get it by specifying __GFP_ZERO or use one of the zalloc variants. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-17s390/pci_dma: make lazy flush independent from the tlb_refresh bitSebastian Ott
We have 2 strategies to reduce the number of RPCIT instructions: * A HW feature indicated via the tlb_refresh bit allows us to omit RPCIT for invalid -> valid translation-table entry updates. * With "lazy flush" we omit RPCIT for valid -> invalid updates until we run out of dma addresses. When we have to reuse dma addresses we issue a global tlb flush using only one RPCIT instruction. Currently lazy flushing depends on tlb_refresh. Since there is no technical reason for this remove this dependency. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-17s390/pci: fix dma address calculation in map_sgSebastian Ott
__s390_dma_map_sg maps a dma-contiguous area. Although we only map whole pages we have to take into account that the area doesn't start or stop at a page boundary because we use the dma address to loop over the individual sg entries. Failing to do that might lead to an access of the wrong sg entry. Fixes: ee877b81c6b9 ("s390/pci_dma: improve map_sg") Reported-and-tested-by: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-17s390/time: fix clocksource steering for negative clock offsetsMartin Schwidefsky
The TOD clock offset injected by an STP sync check can be negative. If the resulting total tod_steering_delta gets negative the kernel will panic. Change the type of tod_steering_delta to a signed type. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 75c7b6f3f6ba ("s390/time: steer clocksource on STP sync events") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-15s390: move sys_call_table and last_break from thread_info to thread_structMartin Schwidefsky
Move the last two architecture specific fields from the thread_info structure to the thread_struct. All that is left in thread_info is the flags field. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390: move cputime accounting fields from thread_info to thread_structMartin Schwidefsky
The user_timer and system_timer fields are used for the per-thread cputime accounting code. The access to these values is simpler if they are moved to the thread_struct as the task_thread_info(tsk) indirection is not needed anymore. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390: move system_call field from thread_info to thread_structMartin Schwidefsky
The system_call field in thread_info structure is used by the signal code to store the number of the current system call while the debugger interacts with its inferior. A better location for the system_call field is with the other debugger related information in the thread_struct. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390: move thread_info into task_structHeiko Carstens
This is the s390 variant of commit 15f4eae70d36 ("x86: Move thread_info into task_struct"). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390/preempt: move preempt_count to the lowcoreMartin Schwidefsky
Convert s390 to use a field in the struct lowcore for the CPU preemption count. It is a bit cheaper to access a lowcore field compared to a thread_info variable and it removes the depencency on a task related structure. bloat-o-meter on the vmlinux image for the default configuration (CONFIG_PREEMPT_NONE=y) reports a small reduction in text size: add/remove: 0/0 grow/shrink: 18/578 up/down: 228/-5448 (-5220) A larger improvement is achieved with the default configuration but with CONFIG_PREEMPT=y and CONFIG_DEBUG_PREEMPT=n: add/remove: 2/6 grow/shrink: 59/4477 up/down: 1618/-228762 (-227144) Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390/bitops: use atomic primitives for bitopsMartin Schwidefsky
Replace the bitops specific atomic update code by the functions from atomic_ops.h. This saves a few lines of non-trivial code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390/atomic: refactor atomic primitivesMartin Schwidefsky
Rework atomic.h to make the low level functions avaible for use in other headers without using atomic_t, e.g. in bitops.h. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-08s390: remove unneeded dependency for gen_facilitiesMasahiro Yamada
The dependency between the object and the source is handled by scripts/Makefile.host, so only "hostprogs-y += gen_facilities" is fine. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-07s390: squash facilities_src.h into gen_facilities.cMasahiro Yamada
We generally expect headers in arch/$(ARCH)/include/asm directory are included from kernel sources, but facilities_src.h is not; it is included from the arch/s390/tools/gen_facilities.c tool. There is no reason to expose this header to the public include path. Furthermore, facilities_src.h makes sure to be included only from gen_facilities.c by the following: #ifndef S390_GEN_FACILITIES_C #error "This file can only be included by gen_facilities.c" #endif This check can be removed by merging the two files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-07s390: delete unneeded #include <linux/kconfig.h> from facilities_src.hMasahiro Yamada
The header facilities_src.h is only included from gen_facilities.c and the tool is compiled with the following extra options: HOSTCFLAGS_gen_facilities.o += -Wall $(LINUXINCLUDE) Please note $(LINUXINCLUDE) is expanded into build options including: -include $(srctree)/include/linux/kconfig.h So, the Makefile always forces the tool to include kconfig.h, i.e., the #include <linux/kconfig.h> directive in the header is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-31s390: kernel: make lgr explicitly non-modularPaul Gortmaker
The Makefile currently controlling compilation of this code is obj-y meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We replace module.h with init.h and export.h since the file does export some symbols. Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-31s390: hypfs: make inode explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: arch/s390/Kconfig:config S390_HYPFS_FS arch/s390/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Build testing indicated the presence of module.h was masking an implicit include of kobject.h, hence the addition of that. Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28s390/time: steer clocksource on STP sync eventsMartin Schwidefsky
On STP sync events the TOD clock will jump in time, either forward or backward. The TOD clocksource claims to be continuous but in case of an STP sync with a negative offset it is not. Subtract the offset injected by the STP sync check from the result of the TOD clocksource to make it continuous again. Add code to drift the offset towards zero with a fixed rate, steering 1 second in ~9 hours. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28s390/time: adjust last_update_clock at clock synchronizationMartin Schwidefsky
The last_update_clock time stamp in the lowcore should be adjusted by the TOD clock delta that is created by the clock synchronization. Otherwise the calculation of the steal time will be incorrect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28s390/time: refactor clock syncMartin Schwidefsky
Merge clock_sync_cpu into stp_sync_clock and split out the update of the global and per-CPU clock fields into clock_sync_global and clock_sync_local. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignmentMichael Holzheu
Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-27Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk cris/arch-v32: cryptocop: print a hex number after a 0x prefix ipack: print a hex number after a 0x prefix block: DAC960: print a hex number after a 0x prefix fs: exofs: print a hex number after a 0x prefix lib/genalloc.c: start search from start of chunk mm: memcontrol: do not recurse in direct reclaim CREDITS: update credit information for Martin Kepplinger proc: fix NULL dereference when reading /proc/<pid>/auxv mm: kmemleak: ensure that the task stack is not freed during scanning lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB latent_entropy: raise CONFIG_FRAME_WARN by default kconfig.h: remove config_enabled() macro ipc: account for kmem usage on mqueue and msg mm/slab: improve performance of gathering slabinfo stats mm: page_alloc: use KERN_CONT where appropriate mm/list_lru.c: avoid error-path NULL pointer deref h8300: fix syscall restarting kcov: properly check if we are in an interrupt mm/slab: fix kmemcg cache creation delayed issue
2016-10-27cris/arch-v32: cryptocop: print a hex number after a 0x prefixUwe Kleine-König
It makes the result hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27kconfig.h: remove config_enabled() macroMasahiro Yamada
The use of config_enabled() is ambiguous. For config options, IS_ENABLED(), IS_REACHABLE(), etc. will make intention clearer. Sometimes config_enabled() has been used for non-config options because it is useful to check whether the given symbol is defined or not. I have been tackling on deprecating config_enabled(), and now is the time to finish this work. Some new users have appeared for v4.9-rc1, but it is trivial to replace them: - arch/x86/mm/kaslr.c replace config_enabled() with IS_ENABLED() because CONFIG_X86_ESPFIX64 and CONFIG_EFI are boolean. - include/asm-generic/export.h replace config_enabled() with __is_defined(). Then, config_enabled() can be removed now. Going forward, please use IS_ENABLED(), IS_REACHABLE(), etc. for config options, and __is_defined() for non-config symbols. Link: http://lkml.kernel.org/r/1476616078-32252-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Garnier <thgarnie@google.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27h8300: fix syscall restartingMark Rutland
Back in commit f56141e3e2d9 ("all arches, signal: move restart_block to struct task_struct"), all architectures and core code were changed to use task_struct::restart_block. However, when h8300 support was subsequently restored in v4.2, it was not updated to account for this, and maintains thread_info::restart_block, which is not kept in sync. This patch drops the redundant restart_block from thread_info, and moves h8300 to the common one in task_struct, ensuring that syscall restarting always works as expected. Fixes: f56141e3e2d9 ("all arches, signal: move restart_block to struct task_struct") Link: http://lkml.kernel.org/r/1476714934-11635-1-git-send-email-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more s390 patches for 4.9: - a fix for an overflow in the dasd driver reported by UBSAN - fix a regression and add hotplug memory to the zone movable again - add ignore defines for the pkey system calls - fix the ouput of the merged stack tracer - replace printk with pr_cont in arch/s390 where appropriate - remove the arch specific return_address function again - ignore reserved channel paths at boot time - add a missing hugetlb_bad_size call to the arch backend" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: fix zone calculation in arch_add_memory() s390/dumpstack: use pr_cont within show_stack and die s390/dumpstack: get rid of return_address again s390/disassambler: use pr_cont where appropriate s390/dumpstack: use pr_cont where appropriate s390/dumpstack: restore reliable indicator for call traces s390/mm: use hugetlb_bad_size() s390/cio: don't register chpids in reserved state s390: ignore pkey system calls s390/dasd: avoid undefined behaviour
2016-10-24Merge tag 'for-linus-4.9-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from David Vrabel: - advertise control feature flags in xenstore - fix x86 build when XEN_PVHVM is disabled * tag 'for-linus-4.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xenbus: check return value of xenbus_scanf() xenbus: prefer list_for_each() x86: xen: move cpu_up functions out of ifdef xenbus: advertise control feature flags
2016-10-24x86: xen: move cpu_up functions out of ifdefArnd Bergmann
Three newly introduced functions are not defined when CONFIG_XEN_PVHVM is disabled, but are still being used: arch/x86/xen/enlighten.c:141:12: warning: ‘xen_cpu_up_prepare’ used but never defined arch/x86/xen/enlighten.c:142:12: warning: ‘xen_cpu_up_online’ used but never defined arch/x86/xen/enlighten.c:143:12: warning: ‘xen_cpu_dead’ used but never defined Fixes: 4d737042d6c4 ("xen/x86: Convert to hotplug state machine") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-24s390/mm: fix zone calculation in arch_add_memory()Gerald Schaefer
Standby (hotplug) memory should be added to ZONE_MOVABLE on s390. After commit 199071f1 "s390/mm: make arch_add_memory() NUMA aware", arch_add_memory() used memblock_end_of_DRAM() to find out the end of ZONE_NORMAL and the beginning of ZONE_MOVABLE. However, commit 7f36e3e5 "memory-hotplug: add hot-added memory ranges to memblock before allocate node_data for a node." moved the call of memblock_add_node() before the call of arch_add_memory() in add_memory_resource(), and thus changed the return value of memblock_end_of_DRAM() when called in arch_add_memory(). As a result, arch_add_memory() will think that all memory blocks should be added to ZONE_NORMAL. Fix this by changing the logic in arch_add_memory() so that it will manually iterate over all zones of a given node to find out which zone a memory block should be added to. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-24s390/dumpstack: use pr_cont within show_stack and dieHeiko Carstens
Use pr_cont instead of printk calls also within show_stack and die in order to avoid extra line breaks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three fixes, a hw-enablement and a cross-arch fix/enablement change: - SGI/UV fix for older platforms - x32 signal handling fix - older x86 platform bootup APIC fix - AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS (Multiply Accumulation Single precision instructions) enablement. - move thread_info back into x86 specific code, to make life easier for other architectures trying to make use of CONFIG_THREAD_INFO_IN_TASK_STRUCT=y" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/smp: Don't try to poke disabled/non-existent APIC sched/core, x86: Make struct thread_info arch specific again x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi() x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features x86/vmware: Skip timer_irq_works() check on VMware
2016-10-22x86/boot/smp: Don't try to poke disabled/non-existent APICVille Syrjälä
Apparently trying to poke a disabled or non-existent APIC leads to a box that doesn't even boot. Let's not do that. No real clue if this is the right fix, but at least my P3 machine boots again. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: dyoung@redhat.com Cc: kexec@lists.infradead.org Cc: stable@vger.kernel.org Fixes: 2a51fe083eba ("arch/x86: Handle non enumerated CPU after physical hotplug") Link: http://lkml.kernel.org/r/1477102684-5092-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-21Merge tag 'powerpc-4.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Prevent unlikely crash in copro_calculate_slb() (Frederic Barrat) - cxl: Prevent adapter reset if an active context exists (Vaibhav Jain) Fixes for code merged this cycle: - Fix boot on systems with uncompressed kernel image (Heiner Kallweit) - Drop dump_numa_memory_topology() (Michael Ellerman) - Fix numa topology console print (Aneesh Kumar K.V) - Ignore the pkey system calls for now (Stephen Rothwell)" * tag 'powerpc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Ignore the pkey system calls for now powerpc: Fix numa topology console print powerpc/mm: Drop dump_numa_memory_topology() cxl: Prevent adapter reset if an active context exists powerpc/boot: Fix boot on systems with uncompressed kernel image powerpc/mm: Prevent unlikely crash in copro_calculate_slb()
2016-10-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM: - avoid livelock when walking guest page tables - fix HYP mode static keys without CC_HAVE_ASM_GOTO MIPS: - fix a build error without TRACEPOINTS_ENABLED s390: - reject a malformed userspace configuration x86: - suppress a warning without CONFIG_CPU_FREQ - initialize whole irq_eoi array" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Map the BSS at HYP arm64: KVM: Take S1 walks into account when determining S2 write faults KVM: s390: reject invalid modes for runtime instrumentation kvm: x86: memset whole irq_eoi kvm/x86: Fix unused variable warning in kvm_timer_init() KVM: MIPS: Add missing uaccess.h include
2016-10-21Merge tag 'kvm-arm-for-4.9-rc2' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for 4.9-rc2 - Handle faults generated by the page table walker as being writes - Map the BSS at EL2
2016-10-21arm/arm64: KVM: Map the BSS at HYPMarc Zyngier
When used with a compiler that doesn't implement "asm goto" (such as the AArch64 port of GCC 4.8), jump labels generate a memory access to find out about the value of the key (instead of just patching the code). The key itself is likely to be stored in the BSS. This is perfectly fine, except that we don't map the BSS at HYP, leading to an exploding kernel at the first access. The obvious fix is simply to map the BSS there (which should have been done a long while ago, but hey...). Reported-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-21arm64: KVM: Take S1 walks into account when determining S2 write faultsWill Deacon
The WnR bit in the HSR/ESR_EL2 indicates whether a data abort was generated by a read or a write instruction. For stage 2 data aborts generated by a stage 1 translation table walk (i.e. the actual page table access faults at EL2), the WnR bit therefore reports whether the instruction generating the walk was a load or a store, *not* whether the page table walker was reading or writing the entry. For page tables marked as read-only at stage 2 (e.g. due to KSM merging them with the tables from another guest), this could result in livelock, where a page table walk generated by a load instruction attempts to set the access flag in the stage 1 descriptor, but fails to trigger CoW in the host since only a read fault is reported. This patch modifies the arm64 kvm_vcpu_dabt_iswrite function to take into account stage 2 faults in stage 1 walks. Since DBM cannot be disabled at EL2 for CPUs that implement it, we assume that these faults are always causes by writes, avoiding the livelock situation at the expense of occasional, spurious CoWs. We could, in theory, do a bit better by checking the guest TCR configuration and inspecting the page table to see why the PTE faulted. However, I doubt this is measurable in practice, and the threat of livelock is real. Cc: <stable@vger.kernel.org> Cc: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20Merge tag 'kvm-s390-master-4.9-1' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: Fix for user-triggerable WARN_ON A malicious user space can provide an invalid mode for runtime instrumentation via the interfaces that are normally used on the target host during migration. This would trigger a WARN_ON via validity intercept. Let's detect this special case.
2016-10-20KVM: s390: reject invalid modes for runtime instrumentationChristian Borntraeger
Usually a validity intercept is a programming error of the host because of invalid entries in the state description. We can get a validity intercept if the mode of the runtime instrumentation control block is wrong. As the host does not know which modes are valid, this can be used by userspace to trigger a WARN. Instead of printing a WARN let's return an error to userspace as this can only happen if userspace provides a malformed initial value (e.g. on migration). The kernel should never warn on bogus input. Instead let's log it into the s390 debug feature. While at it, let's return -EINVAL for all validity intercepts as this will trigger an error in QEMU like error: kvm run failed Invalid argument PSW=mask 0404c00180000000 addr 000000000063c226 cc 00 R00=000000000000004f R01=0000000000000004 R02=0000000000760005 R03=000000007fe0a000 R04=000000000064ba2a R05=000000049db73dd0 R06=000000000082c4b0 R07=0000000000000041 R08=0000000000000002 R09=000003e0804042a8 R10=0000000496152c42 R11=000000007fe0afb0 [...] This will avoid an endless loop of validity intercepts. Cc: stable@vger.kernel.org # v4.5+ Fixes: c6e5f166373a ("KVM: s390: implement the RI support of guest") Acked-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-10-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Most of these are CC'd for stable, but there are a few fixing issues introduced during the recent merge window too. There's also a fix for the xgene PMU driver, but it seemed daft to send as a separate pull request, so I've included it here with the rest of the fixes. - Fix ACPI boot due to recent broken NUMA changes - Fix remote enabling of CPU features requiring PSTATE bit manipulation - Add address range check when emulating user cache maintenance - Fix LL/SC loops that allow compiler to introduce memory accesses - Fix recently added write_sysreg_s macro - Ensure MDCR_EL2 is initialised on qemu targets without a PMU - Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE - Correctly drive recent ld when building relocatable Image - Remove junk IS_ERR check from xgene PMU driver added during merge window - pr_cont fixes after core changes in the merge window" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: remove pr_cont abuse from mem_init arm64: fix show_regs fallout from KERN_CONT changes arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y arm64: suspend: Reconfigure PSTATE after resume from idle arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call arm64: cpufeature: Schedule enable() calls instead of calling them via IPI arm64: Cortex-A53 errata workaround: check for kernel addresses arm64: percpu: rewrite ll/sc loops in assembly arm64: swp emulation: bound LL/SC retries before rescheduling arm64: sysreg: Fix use of XZR in write_sysreg_s arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y arm64: kernel: Init MDCR_EL2 even in the absence of a PMU perf: xgene: Remove bogus IS_ERR() check arm64: kernel: numa: fix ACPI boot cpu numa node mapping arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y