summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-04-26Merge tag 's390-5.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Add a few notrace annotations to avoid potential crashes when switching ftrace tracers. - Avoid setting affinity for floating irqs in pci code. - Fix build issue found by kbuild test robot. * tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/protvirt: fix compilation issue s390/pci: do not set affinity for floating irqs s390/ftrace: fix potential crashes when switching tracers
2020-04-26Merge tag 'powerpc-5.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - One important fix for a bug in the way we find the cache-line size from the device tree, which was leading to the wrong size being reported to userspace on some platforms. - A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around leading to a window at boot when the strict mapping wasn't enforced. - A fix to enable our KUAP (kernel user access prevention) debugging on PPC32. - A build fix for clang in lib/mpi. Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai. * tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: lib/mpi: Fix building for powerpc with clang powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32 powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure powerpc/setup_64: Set cache-line-size based on cache-block-size
2020-04-25Merge tag 'sched-urgent-2020-04-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: - an uclamp accounting fix - three frequency invariance fixes and a readability improvement" * tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix reset-on-fork from RT with uclamp x86, sched: Move check for CPU type to caller function x86, sched: Don't enable static key when starting secondary CPUs x86, sched: Account for CPUs with less than 4 cores in freq. invariance x86, sched: Bail out of frequency invariance if base frequency is unknown
2020-04-25Merge tag 'perf-urgent-2020-04-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two changes: - fix exit event records - extend x86 PMU driver enumeration to add Intel Jasper Lake CPU support" * tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: fix parent pid/tid in task exit events perf/x86/cstate: Add Jasper Lake CPU support
2020-04-25s390/protvirt: fix compilation issueClaudio Imbrenda
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST set but CONFIG_KVM unset. This patch fixes the issue by making the needed variable always available. Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com Fixes: a0f60f843199 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Philipp Rudo <prudo@linux.ibm.com> Suggested-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in netfilter flowtable, from Roi Dayan. 2) Ref-count leaks in netrom and tipc, from Xiyu Yang. 3) Fix warning when mptcp socket is never accepted before close, from Florian Westphal. 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang. 5) Fix large delays during PTP synchornization in cxgb4, from Rahul Lakkireddy. 6) team_mode_get() can hang, from Taehee Yoo. 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver, from Niklas Schnelle. 8) Fix handling of bpf XADD on BTF memory, from Jann Horn. 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson. 10) Missing queue memory release in iwlwifi pcie code, from Johannes Berg. 11) Fix NULL deref in macvlan device event, from Taehee Yoo. 12) Initialize lan87xx phy correctly, from Yuiko Oshino. 13) Fix looping between VRF and XFRM lookups, from David Ahern. 14) etf packet scheduler assumes all sockets are full sockets, which is not necessarily true. From Eric Dumazet. 15) Fix mptcp data_fin handling in RX path, from Paolo Abeni. 16) fib_select_default() needs to handle nexthop objects, from David Ahern. 17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun. 18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca. 19) Correct rx/tx stats in bcmgenet driver, from Doug Berger. 20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix from Luke Nelson. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits) selftests/bpf: Fix a couple of broken test_btf cases tools/runqslower: Ensure own vmlinux.h is picked up first bpf: Make bpf_link_fops static bpftool: Respect the -d option in struct_ops cmd selftests/bpf: Add test for freplace program with expected_attach_type bpf: Propagate expected_attach_type when verifying freplace programs bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd bpf, x86_32: Fix logic error in BPF_LDX zero-extension bpf, x86_32: Fix clobbering of dst for BPF_JSET bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension bpf: Fix reStructuredText markup net: systemport: suppress warnings on failed Rx SKB allocations net: bcmgenet: suppress warnings on failed Rx SKB allocations macsec: avoid to set wrong mtu mac80211: sta_info: Add lockdep condition for RCU list usage mac80211: populate debugfs only after cfg80211 init net: bcmgenet: correct per TX/RX ring statistics net: meth: remove spurious copyright text net: phy: bcm84881: clear settings on link down chcr: Fix CPU hard lockup ...
2020-04-24bpf, x86_32: Fix logic error in BPF_LDX zero-extensionWang YanQing
When verifier_zext is true, we don't need to emit code for zero-extension. Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen") Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
2020-04-24bpf, x86_32: Fix clobbering of dst for BPF_JSETLuke Nelson
The current JIT clobbers the destination register for BPF_JSET BPF_X and BPF_K by using "and" and "or" instructions. This is fine when the destination register is a temporary loaded from a register stored on the stack but not otherwise. This patch fixes the problem (for both BPF_K and BPF_X) by always loading the destination register into temporaries since BPF_JSET should not modify the destination register. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way. Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Wang YanQing <udknight@gmail.com> Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
2020-04-24bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extensionLuke Nelson
The current JIT uses the following sequence to zero-extend into the upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W}, when the destination register is not on the stack: EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0); The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte immediate; the current code emits only 1 byte of the immediate. This means that the first 3 bytes of the next instruction will be treated as the rest of the immediate, breaking the stream of instructions. This patch fixes the problem by instead emitting "xor dst_hi,dst_hi" to clear the upper 32 bits. This fixes the problem and is more efficient than using MOV to load a zero immediate. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way, and the verifier implements a zero-extension optimization. But the JIT should avoid emitting incorrect encodings regardless. Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Acked-by: Wang YanQing <udknight@gmail.com> Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
2020-04-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Ensure context synchronisation after a write to APIAKey. - Fix bullet list formatting in Documentation/arm64/amu.rst to eliminate doc warnings. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Documentation: arm64: fix amu.rst doc warnings arm64: sync kernel APIAKey when installing
2020-04-24Merge tag 'kbuild-fixes-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix scripts/config to properly handle ':' in string type CONFIG options - fix unneeded rebuilds of DT schema check rule - git rid of ordering dependency between <linux/vermagic.h> and <linux/module.h> to fix build errors in some network drivers - clean up generated headers of host arch with 'make ARCH=um mrproper' * tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: h8300: ignore vmlinux.lds Documentation: kbuild: fix the section title format um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h> kbuild: fix DT binding schema rule again to avoid needless rebuilds scripts/config: allow colons in option strings for sed
2020-04-23Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found after restarting my randconfig build testing that had been dormant for a while. On the Nokia N950/N9 phone, a DT fix is required to address a boot regression. For the bcm283x (Raspberry Pi), two DT fixes address minor issues" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: imx8: select SOC_BUS soc: tegra: fix tegra_pmc_get_suspend_mode definition soc: fsl: dpio: avoid stack usage warning soc: fsl: dpio: fix incorrect pointer conversions ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: bcm283x: Disable dsi0 node firmware: xilinx: make firmware_debugfs_root static drivers: soc: xilinx: fix firmware driver Kconfig dependency ARM: dts: bcm283x: Add cells encoding format to firmware bus ARM: dts: OMAP3: disable RNG on N950/N9
2020-04-23Merge tag 'arm-soc/for-5.7/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.7, please pull the following: - Nicolas provides a fix for 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations") which missed adding proper #address-cells and #size-cells properties and he also disables the DSI node which should have been disabled by default but was not. * tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Disable dsi0 node ARM: dts: bcm283x: Add cells encoding format to firmware bus Link: https://lore.kernel.org/r/20200417171725.1084-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-23h8300: ignore vmlinux.ldsMasahiro Yamada
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-23um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/Vitor Massaru Iha
In this workflow: $ make ARCH=um defconfig && make ARCH=um -j8 [snip] $ make ARCH=um mrproper [snip] $ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um [snip] CC scripts/mod/empty.o In file included from ../include/linux/types.h:6, from ../include/linux/mod_devicetable.h:12, from ../scripts/mod/devicetable-offsets.c:3: ../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory 5 | #include <asm/types.h> | ^~~~~~~~~~~~~ compilation terminated. make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2 make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um' make: *** [Makefile:180: sub-make] Error 2 The cause of the error was because arch/$(SUBARCH)/include/generated files weren't properly cleaned by `make ARCH=um mrproper`. Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build") Reported-by: Theodore Ts'o <tytso@mit.edu> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-23arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>Masahiro Yamada
As the bug report [1] pointed out, <linux/vermagic.h> must be included after <linux/module.h>. I believe we should not impose any include order restriction. We often sort include directives alphabetically, but it is just coding style convention. Technically, we can include header files in any order by making every header self-contained. Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in <asm/module.h>, which is not included from <linux/vermagic.h>. Hence, the straight-forward fix-up would be as follows: |--- a/include/linux/vermagic.h |+++ b/include/linux/vermagic.h |@@ -1,5 +1,6 @@ | /* SPDX-License-Identifier: GPL-2.0 */ | #include <generated/utsrelease.h> |+#include <linux/module.h> | | /* Simply sanity version stamp for modules. */ | #ifdef CONFIG_SMP This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC definitions into <asm/vermagic.h>. With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal, and the location of MODULE_ARCH_VERMAGIC definitions will be consistent. For arc and ia64, MODULE_PROC_FAMILY is only used for defining MODULE_ARCH_VERMAGIC. I squashed it. For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely because they contained nothing but MODULE_ARCH_VERMAGIC definition. Kbuild will automatically generate <asm/modules.h> at build-time, wrapping <asm-generic/module.h>. [1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org>
2020-04-22x86, sched: Move check for CPU type to caller functionGiovanni Gherdovich
Improve readability of the function intel_set_max_freq_ratio() by moving the check for KNL CPUs there, together with checks for GLM and SKX. Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200416054745.740-5-ggherdovich@suse.cz
2020-04-22x86, sched: Don't enable static key when starting secondary CPUsPeter Zijlstra (Intel)
The static key arch_scale_freq_key only needs to be enabled once (at boot). This change fixes a bug by which the key was enabled every time cpu0 is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are started from the idle thread: setting a static key from there means acquiring a lock and may result in sleeping in the idle task, causing CPU lockup. Another consequence of this change is that init_counter_refs() is now called on each CPU correctly; previously the function on_each_cpu() was used, but it was called at boot when the only online cpu is cpu0. [ggherdovich@suse.cz: Tested and wrote changelog] Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200416054745.740-4-ggherdovich@suse.cz
2020-04-22x86, sched: Account for CPUs with less than 4 cores in freq. invarianceGiovanni Gherdovich
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will rightfully report that the 4C turbo ratio is zero. In such cases, use the 1C turbo ratio instead for frequency invariance calculations. Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Reported-by: Like Xu <like.xu@linux.intel.com> Reported-by: Neil Rickert <nwr10cst-oslnx@yahoo.com> Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com> Link: https://lkml.kernel.org/r/20200416054745.740-3-ggherdovich@suse.cz
2020-04-22x86, sched: Bail out of frequency invariance if base frequency is unknownGiovanni Gherdovich
Some hypervisors such as VMWare ESXi 5.5 advertise support for X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular, MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base clock frequency of the CPU (highest non-turbo frequency), producing a division by zero when computing the ratio turbo_freq/base_freq necessary for frequency invariant accounting. It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance couldn't be done in principle (not that it would make a lot of sense in a VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise that feature. Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200416054745.740-2-ggherdovich@suse.cz
2020-04-22perf/x86/cstate: Add Jasper Lake CPU supportHarry Pan
The Jasper Lake processor is Tremont microarchitecture, reuse the glm_cstates table of Goldmont and Goldmont Plus to enable the C-states residency profiling. Signed-off-by: Harry Pan <harry.pan@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200402190658.1.Ic02e891daac41303aed1f2fc6c64f6110edd27bd@changeid
2020-04-22s390/pci: do not set affinity for floating irqsNiklas Schnelle
with the introduction of CPU directed interrupts the kernel parameter pci=force_floating was introduced to fall back to the previous behavior using floating irqs. However we were still setting the affinity in that case, both in __irq_alloc_descs() and via the irq_set_affinity callback in struct irq_chip. For the former only set the affinity in the directed case. The latter is explicitly set in zpci_directed_irq_init() so we can just leave it unset for the floating case. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-22s390/ftrace: fix potential crashes when switching tracersPhilipp Rudo
Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-22powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32Christophe Leroy
CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32 which doesn't exists. Fixing it leads to a deadlock due to a vital register getting clobbered in _switch(). Change dependency to PPC32 and use r0 instead of r4 in _switch() Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
2020-04-22powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failureChristophe Leroy
WRITE_RO lkdtm test works. But when selecting CONFIG_DEBUG_RODATA_TEST, the kernel reports rodata_test: test data was not read only This is because when rodata test runs, there are still old entries in TLB. Flush TLB after setting kernel pages RO or NX. Fixes: d5f17ee96447 ("powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/485caac75f195f18c11eb077b0031fdd2bb7fb9e.1587361039.git.christophe.leroy@c-s.fr
2020-04-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/vm: fix cross-compile build coredump: fix null pointer dereference on coredump mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path shmem: fix possible deadlocks on shmlock_user_lock vmalloc: fix remap_vmalloc_range() bounds checks mm/shmem: fix build without THP mm/ksm: fix NULL pointer dereference when KSM zero page is enabled tools/build: tweak unused value workaround checkpatch: fix a typo in the regex for $allocFunctions mm, gup: return EINTR when gup is interrupted by fatal signals mm/hugetlb: fix a addressing exception caused by huge_pte_offset MAINTAINERS: add an entry for kfifo mm/userfaultfd: disable userfaultfd-wp on x86_32 slub: avoid redzone when choosing freepointer location sh: fix build error in mm/init.c
2020-04-21mm/userfaultfd: disable userfaultfd-wp on x86_32Peter Xu
Userfaultfd-wp is not yet working on 32bit hosts, but it's accidentally enabled previously. Disable it. Fixes: 5a281062af1d ("userfaultfd: wp: add WP pagetable tracking to x86") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Link: http://lkml.kernel.org/r/20200413141608.109211-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21sh: fix build error in mm/init.cMasahiro Yamada
The closing parenthesis is missing. Fixes: bfeb022f8fe4 ("mm/memory_hotplug: add pgprot_t to mhp_params") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Link: http://lkml.kernel.org/r/20200413014743.16353-1-masahiroy@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21arm64: sync kernel APIAKey when installingMark Rutland
A direct write to a APxxKey_EL1 register requires a context synchronization event to ensure that indirect reads made by subsequent instructions (e.g. AUTIASP, PACIASP) observe the new value. When we initialize the boot task's APIAKey in boot_init_stack_canary() via ptrauth_keys_switch_kernel() we miss the necessary ISB, and so there is a window where instructions are not guaranteed to use the new APIAKey value. This has been observed to result in boot-time crashes where PACIASP and AUTIASP within a function used a mixture of the old and new key values. Fix this by having ptrauth_keys_switch_kernel() synchronize the new key value with an ISB. At the same time, __ptrauth_key_install() is renamed to __ptrauth_key_install_nosync() so that it is obvious that this performs no synchronization itself. Fixes: 28321582334c261c ("arm64: initialize ptrauth keys for kernel booting task") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Will Deacon <will@kernel.org> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Will Deacon <will@kernel.org>
2020-04-21Merge tag 'kvm-ppc-fixes-5.7-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.7 - Fix a regression introduced in the last merge window, which results in guests in HPT mode dying randomly.
2020-04-21Merge tag 'kvm-s390-master-5.7-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fix for 5.7 and maintainer update - Silence false positive lockdep warning - add Claudio as reviewer
2020-04-21powerpc/setup_64: Set cache-line-size based on cache-block-sizeChris Packham
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reported-by: Qian Cai <cai@lca.pw> [mpe: Add even more detail to change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz
2020-04-20bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_BLuke Nelson
This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT") Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
2020-04-21KVM: PPC: Book3S HV: Handle non-present PTEs in page fault functionsPaul Mackerras
Since cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler", it's been possible in fairly rare circumstances to load a non-present PTE in kvmppc_book3s_hv_page_fault() when running a guest on a POWER8 host. Because that case wasn't checked for, we could misinterpret the non-present PTE as being a cache-inhibited PTE. That could mismatch with the corresponding hash PTE, which would cause the function to fail with -EFAULT a little further down. That would propagate up to the KVM_RUN ioctl() generally causing the KVM userspace (usually qemu) to fall over. This addresses the problem by catching that case and returning to the guest instead. For completeness, this fixes the radix page fault handler in the same way. For radix this didn't cause any obvious misbehaviour, because we ended up putting the non-present PTE into the guest's partition-scoped page tables, leading immediately to another hypervisor data/instruction storage interrupt, which would go through the page fault path again and fix things up. Fixes: cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler" Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1820402 Reported-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-04-20kvm: Disable objtool frame pointer checking for vmenter.SJosh Poimboeuf
Frame pointers are completely broken by vmenter.S because it clobbers RBP: arch/x86/kvm/svm/vmenter.o: warning: objtool: __svm_vcpu_run()+0xe4: BP used as a scratch register That's unavoidable, so just skip checking that file when frame pointers are configured in. On the other hand, ORC can handle that code just fine, so leave objtool enabled in the !FRAME_POINTER case. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Message-Id: <01fae42917bacad18be8d2cbc771353da6603473.1587398610.git.jpoimboe@redhat.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: 199cd1d7b534 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-20Merge tag 'omap-for-v5.6/fixes-rc7-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Boot regression fix for N950/N9 We need to tag RNG as disabled for N950/N9 as it blocked by the secure mode. We have a similar change done for N900, but I missed adding it for N950/N9 with the recent RNG changes. * tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP3: disable RNG on N950/N9 Link: https://lore.kernel.org/r/pull-1585340588-558327@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-20KVM: s390: Fix PV check in deliverable_irqs()Eric Farman
The diag 0x44 handler, which handles a directed yield, goes into a a codepath that does a kvm_for_each_vcpu() and ultimately deliverable_irqs(). The new check for kvm_s390_pv_cpu_is_protected() contains an assertion that the vcpu->mutex is held, which isn't going to be the case in this scenario. The result is a plethora of these messages if the lock debugging is enabled, and thus an implication that we have a problem. WARNING: CPU: 9 PID: 16167 at arch/s390/kvm/kvm-s390.h:239 deliverable_irqs+0x1c6/0x1d0 [kvm] ...snip... Call Trace: [<000003ff80429bf2>] deliverable_irqs+0x1ca/0x1d0 [kvm] ([<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm]) [<000003ff8042ba82>] kvm_s390_vcpu_has_irq+0x2a/0xa8 [kvm] [<000003ff804101e2>] kvm_arch_dy_runnable+0x22/0x38 [kvm] [<000003ff80410284>] kvm_vcpu_on_spin+0x8c/0x1d0 [kvm] [<000003ff80436888>] kvm_s390_handle_diag+0x3b0/0x768 [kvm] [<000003ff80425af4>] kvm_handle_sie_intercept+0x1cc/0xcd0 [kvm] [<000003ff80422bb0>] __vcpu_run+0x7b8/0xfd0 [kvm] [<000003ff80423de6>] kvm_arch_vcpu_ioctl_run+0xee/0x3e0 [kvm] [<000003ff8040ccd8>] kvm_vcpu_ioctl+0x2c8/0x8d0 [kvm] [<00000001504ced06>] ksys_ioctl+0xae/0xe8 [<00000001504cedaa>] __s390x_sys_ioctl+0x2a/0x38 [<0000000150cb9034>] system_call+0xd8/0x2d8 2 locks held by CPU 2/KVM/16167: #0: 00000001951980c0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x90/0x8d0 [kvm] #1: 000000019599c0f0 (&kvm->srcu){....}, at: __vcpu_run+0x4bc/0xfd0 [kvm] Last Breaking-Event-Address: [<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm] irq event stamp: 11967 hardirqs last enabled at (11975): [<00000001502992f2>] console_unlock+0x4ca/0x650 hardirqs last disabled at (11982): [<0000000150298ee8>] console_unlock+0xc0/0x650 softirqs last enabled at (7940): [<0000000150cba6ca>] __do_softirq+0x422/0x4d8 softirqs last disabled at (7929): [<00000001501cd688>] do_softirq_own_stack+0x70/0x80 Considering what's being done here, let's fix this by removing the mutex assertion rather than acquiring the mutex for every other vcpu. Fixes: 201ae986ead7 ("KVM: s390: protvirt: Implement interrupt injection") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200415190353.63625-1-farman@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-19Merge tag 'x86-urgent-2020-04-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 and objtool fixes from Thomas Gleixner: "A set of fixes for x86 and objtool: objtool: - Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP is enabled. - Support clang non-section symbols in objtool ORC dump - Fix switch table detection in .text.unlikely - Make the BP scratch register warning more robust. x86: - Increase microcode maximum patch size for AMD to cope with new CPUs which have a larger patch size. - Fix a crash in the resource control filesystem when the removal of the default resource group is attempted. - Preserve Code and Data Prioritization enabled state accross CPU hotplug. - Update split lock cpu matching to use the new X86_MATCH macros. - Change the split lock enumeration as Intel finaly decided that the IA32_CORE_CAPABILITIES bits are not architectural contrary to what the SDM claims. !@#%$^! - Add Tremont CPU models to the split lock detection cpu match. - Add a missing static attribute to make sparse happy" * tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Add Tremont family CPU models x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural x86/resctrl: Preserve CDP enable over CPU hotplug x86/resctrl: Fix invalid attempt at removing the default resource group x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL() x86/umip: Make umip_insns static x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE objtool: Make BP scratch register warning more robust objtool: Fix switch table detection in .text.unlikely objtool: Support Clang non-section symbols in ORC generation objtool: Support Clang non-section symbols in ORC dump objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
2020-04-18x86/split_lock: Add Tremont family CPU modelsTony Luck
Tremont CPUs support IA32_CORE_CAPABILITIES bits to indicate whether specific SKUs have support for split lock detection. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200416205754.21177-4-tony.luck@intel.com
2020-04-18x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architecturalTony Luck
The Intel Software Developers' Manual erroneously listed bit 5 of the IA32_CORE_CAPABILITIES register as an architectural feature. It is not. Features enumerated by IA32_CORE_CAPABILITIES are model specific and implementation details may vary in different cpu models. Thus it is only safe to trust features after checking the CPU model. Icelake client and server models are known to implement the split lock detect feature even though they don't enumerate IA32_CORE_CAPABILITIES [ tglx: Use switch() for readability and massage comments ] Fixes: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200416205754.21177-3-tony.luck@intel.com
2020-04-17Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Remove vdso code trying to free unallocated pages. - Delete the space separator in the __emit_inst macro as it breaks the clang integrated assembler. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Delete the space separator in __emit_inst arm64: vdso: don't free unallocated pages
2020-04-17Merge tag 'for-linus-5.7-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen update from Juergen Gross: - a small cleanup patch - a security fix for a bug in the Xen hypervisor to avoid enabling Xen guests to crash dom0 on an unfixed hypervisor. * tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: make _xen_start_info static xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
2020-04-17x86/resctrl: Preserve CDP enable over CPU hotplugJames Morse
Resctrl assumes that all CPUs are online when the filesystem is mounted, and that CPUs remember their CDP-enabled state over CPU hotplug. This goes wrong when resctrl's CDP-enabled state changes while all the CPUs in a domain are offline. When a domain comes online, enable (or disable!) CDP to match resctrl's current setting. Fixes: 5ff193fbde20 ("x86/intel_rdt: Add basic resctrl filesystem support") Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200221162105.154163-1-james.morse@arm.com
2020-04-17kvm: Handle reads of SandyBridge RAPL PMU MSRs rather than injecting #GPVenkatesh Srinivas
Linux 3.14 unconditionally reads the RAPL PMU MSRs on boot, without handling General Protection Faults on reading those MSRs. Rather than injecting a #GP, which prevents boot, handle the MSRs by returning 0 for their data. Zero was checked to be safe by code review of the RAPL PMU driver and in discussion with the original driver author (eranian@google.com). Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Jon Cargille <jcargill@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200416184254.248374-1-jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-17KVM: Remove CREATE_IRQCHIP/SET_PIT2 raceSteve Rutherford
Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized. SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table. Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Jon Cargille <jcargill@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200416191152.259434-1-jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-17ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=yAhmad Fatoum
512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: <stable@vger.kernel.org> Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Tested-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-17x86/resctrl: Fix invalid attempt at removing the default resource groupReinette Chatre
The default resource group ("rdtgroup_default") is associated with the root of the resctrl filesystem and should never be removed. New resource groups can be created as subdirectories of the resctrl filesystem and they can be removed from user space. There exists a safeguard in the directory removal code (rdtgroup_rmdir()) that ensures that only subdirectories can be removed by testing that the directory to be removed has to be a child of the root directory. A possible deadlock was recently fixed with 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference"). This fix involved associating the private data of the "mon_groups" and "mon_data" directories to the resource group to which they belong instead of NULL as before. A consequence of this change was that the original safeguard code preventing removal of "mon_groups" and "mon_data" found in the root directory failed resulting in attempts to remove the default resource group that ends in a BUG: kernel BUG at mm/slub.c:3969! invalid opcode: 0000 [#1] SMP PTI Call Trace: rdtgroup_rmdir+0x16b/0x2c0 kernfs_iop_rmdir+0x5c/0x90 vfs_rmdir+0x7a/0x160 do_rmdir+0x17d/0x1e0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by improving the directory removal safeguard to ensure that subdirectories of the resctrl root directory can only be removed if they are a child of the resctrl filesystem's root _and_ not associated with the default resource group. Fixes: 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference") Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com
2020-04-17x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()Tony Luck
The SPLIT_LOCK_CPU() macro escaped the tree-wide sweep for old-style initialization. Update to use X86_MATCH_INTEL_FAM6_MODEL(). Fixes: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200416205754.21177-2-tony.luck@intel.com
2020-04-17arm/xen: make _xen_start_info staticJason Yan
Fix the following sparse warning: arch/arm64/xen/../../arm/xen/enlighten.c:39:19: warning: symbol '_xen_start_info' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200415084853.5808-1-yanaijie@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 19:55:47 +0000