summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-04-04Merge tag 'riscv-for-linus-5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "I dropped the ball a bit here: these patches should all probably have been part of rc2, but I wanted to get around to properly testing them in the various configurations (qemu32, qeum64, unleashed) first. Unfortunately I've been traveling and didn't have time to actually do that, but since these fix concrete bugs and pass my old set of tests I don't want to delay the fixes any longer. There are four independent fixes here: - A fix for the rv32 port that corrects the 64-bit user accesor's fixup label address. - A fix for a regression introduced during the merge window that broke medlow configurations at run time. This patch also includes a fix that disables ftrace for the same set of functions, which was found by inspection at the same time. - A modification of the memory map to avoid overlapping the FIXMAP and VMALLOC regions on systems with small memory maps. - A fix to the module handling code to use the correct syntax for probing Kconfig entries. These have passed my standard test flow, but I didn't have time to expand that testing like I said I would" * tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW) RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area RISC-V: Always compile mm/init.c with cmodel=medany and notrace riscv: fix accessing 8-byte variable from RV32
2019-03-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "A collection of x86 and ARM bugfixes, and some improvements to documentation. On top of this, a cleanup of kvm_para.h headers, which were exported by some architectures even though they not support KVM at all. This is responsible for all the Kbuild changes in the diffstat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION KVM: doc: Document the life cycle of a VM and its resources KVM: selftests: complete IO before migrating guest state KVM: selftests: disable stack protector for all KVM tests KVM: selftests: explicitly disable PIE for tests KVM: selftests: assert on exit reason in CR4/cpuid sync test KVM: x86: update %rip after emulating IO x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts kvm: don't redefine flags as something else kvm: mmu: Used range based flushing in slot_handle_level_range KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region() kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation) KVM: Reject device ioctls from processes other than the VM's creator KVM: doc: Fix incorrect word ordering regarding supported use of APIs KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT ...
2019-03-31Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A pile of x86 updates: - Prevent exceeding he valid physical address space in the /dev/mem limit checks. - Move all header content inside the header guard to prevent compile failures. - Fix the bogus __percpu annotation in this_cpu_has() which makes sparse very noisy. - Disable switch jump tables completely when retpolines are enabled. - Prevent leaking the trampoline address" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/realmode: Make set_real_mode_mem() static inline x86/cpufeature: Fix __percpu annotation in this_cpu_has() x86/mm: Don't exceed the valid physical address space x86/retpolines: Disable switch jump tables when retpolines are enabled x86/realmode: Don't leak the trampoline kernel address x86/boot: Fix incorrect ifdeffery scope x86/resctrl: Remove unused variable
2019-03-31Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fixes from Thomas Gleixner: "Two SMT/hotplug related fixes: - Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup aborts. This is triggered with the 'nosmt' command line option, but can happen by any abort condition. As the real unplug code is not compiled in, prevent the fail by keeping the CPU in zombie state. - Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation completely. With 'nosmt' being a popular option it's required to unplug the half brought up sibling CPUs (due to the MCE wreckage) completely" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
2019-03-31Merge tag 'powerpc-5.1-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Three non-regression fixes. - Our optimised memcmp could read past the end of one of the buffers and potentially trigger a page fault leading to an oops. - Some of our code to read energy management data on PowerVM had an endian bug leading to bogus results. - When reporting a machine check exception we incorrectly reported TLB multihits as D-Cache multhits due to a missing entry in the array of causes. Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar, Segher Boessenkool, Vaidyanathan Srinivasan" * tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/mce: Fix misleading print for TLB mutlihit powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes powerpc/64: Fix memcmp reading past the end of src/dest
2019-03-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Use memblock_alloc() instead of memblock_alloc_low() in request_standard_resources(), the latter being limited to the low 4G memory range on arm64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: replace memblock_alloc_low with memblock_alloc
2019-03-29x86/realmode: Make set_real_mode_mem() static inlineMatteo Croce
Remove the unused @size argument and move it into a header file, so it can be inlined. [ bp: Massage. ] Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190328114233.27835-1-mcroce@redhat.com
2019-03-28RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW)Joe Perches
IS_ENABLED should generally use CONFIG_ prefaced symbols and it doesn't appear as if there is a CMODEL_MEDLOW define. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-28RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC areaAnup Patel
The FIXMAP area overlaps with VMALLOC area in Linux-5.1-rc1 hence we get below warning in Linux RISC-V 32bit kernel. This warning does not show-up in Linux RISC-V 64bit kernel due to large VMALLOC area. WARNING: CPU: 0 PID: 22 at mm/vmalloc.c:150 vmap_page_range_noflush+0x134/0x15c Modules linked in: CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.1.0-rc1-00005-gebc2f658040e #1 Workqueue: events pcpu_balance_workfn Call Trace: [<c002b950>] walk_stackframe+0x0/0xa0 [<c002baac>] show_stack+0x28/0x32 [<c0587354>] dump_stack+0x62/0x7e [<c002fdee>] __warn+0x98/0xce [<c002fe52>] warn_slowpath_null+0x2e/0x3c [<c00e71ce>] vmap_page_range_noflush+0x134/0x15c [<c00e7886>] map_kernel_range_noflush+0xc/0x14 [<c00d54b8>] pcpu_populate_chunk+0x19e/0x236 [<c00d610e>] pcpu_balance_workfn+0x448/0x464 [<c00408d6>] process_one_work+0x16c/0x2ea [<c0040b46>] worker_thread+0xf2/0x3b2 [<c004519a>] kthread+0xce/0xdc [<c002a974>] ret_from_exception+0x0/0xc This patch fixes above warning by placing FIXMAP area below VMALLOC area. Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings") Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-29powerpc/pseries/mce: Fix misleading print for TLB mutlihitMahesh Salgaonkar
On pseries, TLB multihit are reported as D-Cache Multihit. This is because the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04 and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the mc_err_types[] array. Machine check error type per PAPR: 0x00 = Uncorrectable Memory Error (UE) 0x01 = SLB error 0x02 = ERAT Error 0x04 = TLB error 0x05 = D-Cache error 0x07 = I-Cache error Fixes: 8f0b80561f21 ("powerpc/pseries: Display machine check error details.") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-28Merge tag 'kvmarm-fixes-for-5.1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for 5.1 - Fix THP handling in the presence of pre-existing PTEs - Honor request for PTE mappings even when THPs are available - GICv4 performance improvement - Take the srcu lock when writing to guest-controlled ITS data structures - Reset the virtual PMU in preemptible context - Various cleanups
2019-03-28KVM: x86: update %rip after emulating IOSean Christopherson
Most (all?) x86 platforms provide a port IO based reset mechanism, e.g. OUT 92h or CF9h. Userspace may emulate said mechanism, i.e. reset a vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM that it is doing a reset, e.g. Qemu jams vCPU state and resumes running. To avoid corruping %rip after such a reset, commit 0967b7bf1c22 ("KVM: Skip pio instruction when it is emulated, not executed") changed the behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the instruction prior to exiting to userspace. Full emulation doesn't need such tricks becase re-emulating the instruction will naturally handle %rip being changed to point at the reset vector. Updating %rip prior to executing to userspace has several drawbacks: - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation fails it will likely yell about the wrong address. - Single step exits to userspace for are effectively dropped as KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO. - Behavior of PIO emulation is different depending on whether it goes down the fast path or the slow path. Rather than skip the PIO instruction before exiting to userspace, snapshot the linear %rip and cancel PIO completion if the current value does not match the snapshot. For a 64-bit vCPU, i.e. the most common scenario, the snapshot and comparison has negligible overhead as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra VMREAD in this case. All other alternatives to snapshotting the linear %rip that don't rely on an explicit reset announcenment suffer from one corner case or another. For example, canceling PIO completion on any write to %rip fails if userspace does a save/restore of %rip, and attempting to avoid that issue by canceling PIO only if %rip changed then fails if PIO collides with the reset %rip. Attempting to zero in on the exact reset vector won't work for APs, which means adding more hooks such as the vCPU's MP_STATE, and so on and so forth. Checking for a linear %rip match technically suffers from corner cases, e.g. userspace could theoretically rewrite the underlying code page and expect a different instruction to execute, or the guest hardcodes a PIO reset at 0xfffffff0, but those are far, far outside of what can be considered normal operation. Fixes: 432baf60eee3 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O") Cc: <stable@vger.kernel.org> Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28x86/kvm/hyper-v: avoid spurious pending stimer on vCPU initVitaly Kuznetsov
When userspace initializes guest vCPUs it may want to zero all supported MSRs including Hyper-V related ones including HV_X64_MSR_STIMERn_CONFIG/ HV_X64_MSR_STIMERn_COUNT. With commit f3b138c5d89a ("kvm/x86: Update SynIC timers on guest entry only") we began doing stimer_mark_pending() unconditionally on every config change. The issue I'm observing manifests itself as following: - Qemu writes 0 to STIMERn_{CONFIG,COUNT} MSRs and marks all stimers as pending in stimer_pending_bitmap, arms KVM_REQ_HV_STIMER; - kvm_hv_has_stimer_pending() starts returning true; - kvm_vcpu_has_events() starts returning true; - kvm_arch_vcpu_runnable() starts returning true; - when kvm_arch_vcpu_ioctl_run() gets into (vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED) case: - kvm_vcpu_block() gets in 'kvm_vcpu_check_block(vcpu) < 0' and returns immediately, avoiding normal wait path; - -EAGAIN is returned from kvm_arch_vcpu_ioctl_run() immediately forcing userspace to retry. So instead of normal wait path we get a busy loop on all secondary vCPUs before they get INIT signal. This seems to be undesirable, especially given that this happens even when Hyper-V extensions are not used. Generally, it seems to be pointless to mark an stimer as pending in stimer_pending_bitmap and arm KVM_REQ_HV_STIMER as the only thing kvm_hv_process_stimers() will do is clear the corresponding bit. We may just not mark disabled timers as pending instead. Fixes: f3b138c5d89a ("kvm/x86: Update SynIC timers on guest entry only") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrsXiaoyao Li
Since MSR_IA32_ARCH_CAPABILITIES is emualted unconditionally even if host doesn't suppot it. We should move it to array emulated_msrs from arry msrs_to_save, to report to userspace that guest support this msr. Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hostsSean Christopherson
The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES regardless of hardware support under the pretense that KVM fully emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts). Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so that it's emulated on AMD hosts. Fixes: 1eaafe91a0df4 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") Cc: stable@vger.kernel.org Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28kvm: mmu: Used range based flushing in slot_handle_level_rangeBen Gardon
Replace kvm_flush_remote_tlbs with kvm_flush_remote_tlbs_with_address in slot_handle_level_range. When range based flushes are not enabled kvm_flush_remote_tlbs_with_address falls back to kvm_flush_remote_tlbs. This changes the behavior of many functions that indirectly use slot_handle_level_range, iff the range based flushes are enabled. The only potential problem I see with this is that kvm->tlbs_dirty will be cleared less often, however the only caller of slot_handle_level_range that checks tlbs_dirty is kvm_mmu_notifier_invalidate_range_start which checks it and does a kvm_flush_remote_tlbs after calling kvm_unmap_hva_range anyway. Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and without this patch. The patch introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supportedMasahiro Yamada
I do not see any consistency about headers_install of <linux/kvm_para.h> and <asm/kvm_para.h>. According to my analysis of Linux 5.1-rc1, there are 3 groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported alpha, arm, hexagon, mips, powerpc, s390, sparc, x86 [2] <asm/kvm_para.h> is exported, but <linux/kvm_para.h> is not arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc, parisc, sh, unicore32, xtensa [3] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported csky, nds32, riscv This does not match to the actual KVM support. At least, [2] is half-baked. Nor do arch maintainers look like they care about this. For example, commit 0add53713b1c ("microblaze: Add missing kvm_para.h to Kbuild") exported <asm/kvm_para.h> to user-space in order to fix an in-kernel build error. We have two ways to make this consistent: [A] export both <linux/kvm_para.h> and <asm/kvm_para.h> for all architectures, irrespective of the KVM support [B] Match the header export of <linux/kvm_para.h> and <asm/kvm_para.h> to the KVM support My first attempt was [A] because the code looks cleaner, but Paolo suggested [B]. So, this commit goes with [B]. For most architectures, <asm/kvm_para.h> was moved to the kernel-space. I changed include/uapi/linux/Kbuild so that it checks generated asm/kvm_para.h as well as check-in ones. After this commit, there will be two groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported arm, arm64, mips, powerpc, s390, x86 [2] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze, nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()Wei Yang
* nr_mmu_pages would be non-zero only if kvm->arch.n_requested_mmu_pages is non-zero. * nr_mmu_pages is always non-zero, since kvm_mmu_calculate_mmu_pages() never return zero. Based on these two reasons, we can merge the two *if* clause and use the return value from kvm_mmu_calculate_mmu_pages() directly. This simplify the code and also eliminate the possibility for reader to believe nr_mmu_pages would be zero. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP ↵Krish Sadhukhan
fields According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check is performed on vmentry of L2 guests: On processors that support Intel 64 architecture, the IA32_SYSENTER_ESP field and the IA32_SYSENTER_EIP field must each contain a canonical address. Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)Singh, Brijesh
Errata#1096: On a nested data page fault when CR.SMAP=1 and the guest data read generates a SMAP violation, GuestInstrBytes field of the VMCB on a VMEXIT will incorrectly return 0h instead the correct guest instruction bytes . Recommend Workaround: To determine what instruction the guest was executing the hypervisor will have to decode the instruction at the instruction pointer. The recommended workaround can not be implemented for the SEV guest because guest memory is encrypted with the guest specific key, and instruction decoder will not be able to decode the instruction bytes. If we hit this errata in the SEV guest then log the message and request a guest shutdown. Reported-by: Venkatesh Srinivas <venkateshs@google.com> Cc: Jim Mattson <jmattson@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'Sean Christopherson
The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPTSean Christopherson
Explicitly zero out quadrant and invalid instead of inheriting them from the root_mmu. Functionally, this patch is a nop as we (should) never set quadrant for a direct mapped (EPT) root_mmu and nested EPT is only allowed if EPT is used for L1, and the root_mmu will never be invalid at this point. Explicitly setting flags sets the stage for repurposing the legacy paging bits in role, e.g. nxe, cr0_wp, and sm{a,e}p_andnot_wp, at which point 'smm' would be the only flag to be inherited from root_mmu. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28x86/cpufeature: Fix __percpu annotation in this_cpu_has()Jann Horn
&cpu_info.x86_capability is __percpu, and the second argument of x86_this_cpu_test_bit() is expected to be __percpu. Don't cast the __percpu away and then implicitly add it again. This gets rid of 106 lines of sparse warnings with the kernel config I'm using. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nadav Amit <namit@vmware.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190328154948.152273-1-jannh@google.com
2019-03-28Merge tag 's390-5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Improvements and bug fixes for 5.1-rc2: - Fix early free of the channel program in vfio - On AP device removal make sure that all messages are flushed with the driver still attached that queued the message - Limit brk randomization to 32MB to reduce the chance that the heap of ld.so is placed after the main stack - Add a rolling average for the steal time of a CPU, this will be needed for KVM to decide when to do busy waiting - Fix a warning in the CPU-MF code - Add a notification handler for AP configuration change to react faster to new AP devices" * tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpumf: Fix warning from check_processor_id zcrypt: handle AP Info notification from CHSC SEI command vfio: ccw: only free cp on final interrupt s390/vtime: steal time exponential moving average s390/zcrypt: revisit ap device remove procedure s390: limit brk randomization to 32MB
2019-03-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of minor fixes only for now - fix for incorrect DMA channels on Renesas R-Car - Broadcom bcm2835 error handling fixes - Kconfig dependency fixes for bcm2835 and davinci - CPU idle wakeup fix for i.MX6 - MMC regression on Tegra186 - fix incorrect phy settings on one imx board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 ARM: dts: nomadik: Fix polarity of SPI CS ARM: davinci: fix build failure with allnoconfig ARM: imx_v4_v5_defconfig: enable PWM driver ARM: imx_v6_v7_defconfig: continue compiling the pwm driver ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi ARM: dts: imx6ull: Use the correct style for SPDX License Identifier ARM: dts: pfla02: increase phy reset duration ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time ARM: imx51: fix a leaked reference by adding missing of_node_put ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port arm64: bcm2835: Add missing dependency on MFD_CORE. ARM: dts: bcm283x: Fix hdmi hpd gpio pull soc: bcm: bcm2835-pm: Fix error paths of initialization. soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support. arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
2019-03-28x86/mm: Don't exceed the valid physical address spaceRalph Campbell
valid_phys_addr_range() is used to sanity check the physical address range of an operation, e.g., access to /dev/mem. It uses __pa(high_memory) internally. If memory is populated at the end of the physical address space, then __pa(high_memory) is outside of the physical address space because: high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; For the comparison in valid_phys_addr_range() this is not an issue, but if CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which verifies that the resulting physical address is within the valid physical address space of the CPU. So in the case that memory is populated at the end of the physical address space, this is not true and triggers a VIRTUAL_BUG_ON(). Use __pa(high_memory - 1) to prevent the conversion from going beyond the end of valid physical addresses. Fixes: be62a3204406 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Craig Bergstrom <craigb@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Link: https://lkml.kernel.org/r/20190326001817.15413-2-rcampbell@nvidia.com
2019-03-28x86/retpolines: Disable switch jump tables when retpolines are enabledDaniel Borkmann
Commit ce02ef06fcf7 ("x86, retpolines: Raise limit for generating indirect calls from switch-case") raised the limit under retpolines to 20 switch cases where gcc would only then start to emit jump tables, and therefore effectively disabling the emission of slow indirect calls in this area. After this has been brought to attention to gcc folks [0], Martin Liska has then fixed gcc to align with clang by avoiding to generate switch jump tables entirely under retpolines. This is taking effect in gcc starting from stable version 8.4.0. Given kernel supports compilation with older versions of gcc where the fix is not being available or backported anymore, we need to keep the extra KBUILD_CFLAGS around for some time and generally set the -fno-jump-tables to align with what more recent gcc is doing automatically today. More than 20 switch cases are not expected to be fast-path critical, but it would still be good to align with gcc behavior for versions < 8.4.0 in order to have consistency across supported gcc versions. vmlinux size is slightly growing by 0.27% for older gcc. This flag is only set to work around affected gcc, no change for clang. [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86952 Suggested-by: Martin Liska <mliska@suse.cz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Björn Töpel<bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Link: https://lkml.kernel.org/r/20190325135620.14882-1-daniel@iogearbox.net
2019-03-28x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=yThomas Gleixner
The SMT disable 'nosmt' command line argument is not working properly when CONFIG_HOTPLUG_CPU is disabled. The teardown of the sibling CPUs which are required to be brought up due to the MCE issues, cannot work. The CPUs are then kept in a half dead state. As the 'nosmt' functionality has become popular due to the speculative hardware vulnerabilities, the half torn down state is not a proper solution to the problem. Enforce CONFIG_HOTPLUG_CPU=y when SMP is enabled so the full operation is possible. Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Micheal Kelley <michael.h.kelley@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190326163811.598166056@linutronix.de
2019-03-28s390/cpumf: Fix warning from check_processor_idThomas Richter
Function __hw_perf_event_init() used a CPU variable without ensuring CPU preemption has been disabled. This caused the following warning in the kernel log: [ 7.277085] BUG: using smp_processor_id() in preemptible [00000000] code: cf-csdiag/1892 [ 7.277111] caller is cf_diag_event_init+0x13a/0x338 [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1 [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR) [ 7.277139] Call Trace: [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0) [ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0 [ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100 [ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338 [ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0 [ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0 [ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50 [ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8 [ 7.277233] 2 locks held by cf-csdiag/1892: [ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.}, at: __s390x_sys_perf_event_open+0xd2e/0xd50 [ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....}, at: perf_event_alloc+0x52e/0xce0 The variable is now accessed in proper context. Use get_cpu_var()/put_cpu_var() pair to disable preemption during access. As the hardware authorization settings apply to all CPUs, it does not matter which CPU is used to check the authorization setting. Remove the event->count assignment. It is not needed as function perf_event_alloc() allocates memory for the event with kzalloc() and thus count is already set to zero. Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-27arm64: replace memblock_alloc_low with memblock_allocChen Zhou
If we use "crashkernel=Y[@X]" and the start address is above 4G, the arm64 kdump capture kernel may call memblock_alloc_low() failure in request_standard_resources(). Replacing memblock_alloc_low() with memblock_alloc(). [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x0000000040650000 reserved size = 0x0000000004db7f39 [ 0.000000] memory.cnt = 0x6 [ 0.000000] memory[0x0] [0x00000000395f0000-0x000000003968ffff], 0x00000000000a0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x1] [0x0000000039730000-0x000000003973ffff], 0x0000000000010000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x2] [0x0000000039780000-0x000000003986ffff], 0x00000000000f0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x3] [0x0000000039890000-0x0000000039d0ffff], 0x0000000000480000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x4] [0x000000003ed00000-0x000000003ed2ffff], 0x0000000000030000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x5] [0x0000002040000000-0x000000207fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 [ 0.000000] reserved.cnt = 0x7 [ 0.000000] reserved[0x0] [0x0000002040080000-0x0000002041c4dfff], 0x0000000001bce000 bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000002041c53000-0x0000002042c203f8], 0x0000000000fcd3f9 bytes flags: 0x0 [ 0.000000] reserved[0x2] [0x000000207da00000-0x000000207dbfffff], 0x0000000000200000 bytes flags: 0x0 [ 0.000000] reserved[0x3] [0x000000207ddef000-0x000000207fbfffff], 0x0000000001e11000 bytes flags: 0x0 [ 0.000000] reserved[0x4] [0x000000207fdf2b00-0x000000207fdfc03f], 0x0000000000009540 bytes flags: 0x0 [ 0.000000] reserved[0x5] [0x000000207fdfd000-0x000000207ffff3ff], 0x0000000000202400 bytes flags: 0x0 [ 0.000000] reserved[0x6] [0x000000207ffffe00-0x000000207fffffff], 0x0000000000000200 bytes flags: 0x0 [ 0.000000] Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-next-20190321+ #4 [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x188 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x14c/0x31c [ 0.000000] setup_arch+0x2b0/0x5e0 [ 0.000000] start_kernel+0x90/0x52c [ 0.000000] ---[ end Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes ]--- Link: https://www.spinics.net/lists/arm-kernel/msg715293.html Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-27x86/realmode: Don't leak the trampoline kernel addressMatteo Croce
Since commit ad67b74d2469 ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of the trampoline addresses: Base memory trampoline at [(____ptrval____)] 99000 size 24576 Remove the print as we don't want to leak kernel addresses and this statement is not needed anymore. Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
2019-03-27x86/boot: Fix incorrect ifdeffery scopeBaoquan He
The declarations related to immovable memory handling are out of the BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com
2019-03-26RISC-V: Always compile mm/init.c with cmodel=medany and notraceAnup Patel
The Linux RISC-V 32bit kernel is broken after we moved setup_vm() from kernel/setup.c to mm/init.c because Linux RISC-V 32bit kernel by default uses cmodel=medlow which results in a non-position-independent setup_vm(). This patch fixes Linux RISC-V 32bit kernel booting by: 1. Forcing cmodel=medany for mm/init.c 2. Moving remaing MM-related stuff va_pa_offset, pfn_base and empty_zero_page from kernel/setup.c to mm/init.c Further, the setup_vm() cannot handle GCC instrumentation for FTRACE so we disable it for mm/init.c by not using "-pg" compiler flag. Fixes: 6f1e9e946f0b ("RISC-V: Move setup_vm() to mm/init.c") Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-26riscv: fix accessing 8-byte variable from RV32Alan Kao
A memory save operation to 8-byte variable in RV32 is divided into two sw instructions in the put_user macro. The current fixup returns execution flow to the second sw instead of the one after it. This patch fixes this fixup code according to the load access part. Signed-off-by: Alan Kao<alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-27powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexesGautham R. Shenoy
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent, we currently use of_read_property() to obtain the pointer to the array corresponding to the property "ibm,drc-indexes". The elements of this array are of type __be32, but are accessed without any conversion to the OS-endianness, which is buggy on a Little Endian OS. Fix this by using of_property_read_u32_index() accessor function to safely read the elements of the array. Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-25arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186Jonathan Hunter
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ... mmc2: running CQE recovery mmc2: mmc_select_hs400 failed, error -110 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700 mmc2: cqhci: CQE failed to exit halt state For now disable CQE support for Tegra186 until this issue is resolved. Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25Merge tag 'imx-fixes-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.1: - Correct phy mode setting of imx6dl-yapp4 board to fix a problem caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode"). - Add a missing of_node_put call to fix leaked reference detected by coccinelle in imx51 machine code. - Fix imx6q cpuidle driver bug which causes that CPU might not wake up at expected time. - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix transmission timeouts error seen on imx6qdl-phytec-pfla02 board. - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h. - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi. - Correct pseudo PHY address of switch device for imx6dl-yapp4 board. - Update PWM driver options in imx defconfig files due to the change on driver part. * tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v4_v5_defconfig: enable PWM driver ARM: imx_v6_v7_defconfig: continue compiling the pwm driver ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi ARM: dts: imx6ull: Use the correct style for SPDX License Identifier ARM: dts: pfla02: increase phy reset duration ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time ARM: imx51: fix a leaked reference by adding missing of_node_put ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
2019-03-25Merge tag 'arm-soc/for-5.1/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1, please pull the following: - Eric provides fixes for the bcm2835-pm driver: added missing depends on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error paths on initialization and fixing the PM_IMAGE_PERI power domain * tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux: arm64: bcm2835: Add missing dependency on MFD_CORE. soc: bcm: bcm2835-pm: Fix error paths of initialization. soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
2019-03-25Merge tag 'arm-soc/for-5.1/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.1, please pull the following: - Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi model B revision 2 * tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix hdmi hpd gpio pull
2019-03-25ARM: dts: nomadik: Fix polarity of SPI CSLinus Walleij
The SPI DT bindings are for historical reasons a pitfall, the ability to flag a GPIO line as active high/low with the second cell flags was introduced later so the SPI subsystem will only accept the bool flag spi-cs-high to indicate that the line is active high. It worked by mistake, but the mistake was corrected in another commit. The comment in the DTS file was also misleading: this CS is indeed active high. Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25Merge tag 'renesas-fixes-for-v5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.1 R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs: * Correct SCIF5 DMA channels * tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
2019-03-25ARM: davinci: fix build failure with allnoconfigSekhar Nori
allnoconfig build with just ARCH_DAVINCI enabled fails because drivers/clk/davinci/* depends on REGMAP being enabled. Fix it by selecting REGMAP_MMIO when building in DaVinci support. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-25powerpc/64: Fix memcmp reading past the end of src/destMichael Ellerman
Chandan reported that fstests' generic/026 test hit a crash: BUG: Unable to handle kernel data access at 0xc00000062ac40000 Faulting instruction address: 0xc000000000092240 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1 NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000 REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000 CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0 GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660 GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4 GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0 GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002 GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000 GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000 NIP memcmp+0x120/0x690 LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0 Call Trace: xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable) xfs_da3_node_lookup_int+0x32c/0x5a0 xfs_attr_node_addname+0x170/0x6b0 xfs_attr_set+0x2ac/0x340 __xfs_set_acl+0xf0/0x230 xfs_set_acl+0xd0/0x160 set_posix_acl+0xc0/0x130 posix_acl_xattr_set+0x68/0x110 __vfs_setxattr+0xa4/0x110 __vfs_setxattr_noperm+0xac/0x240 vfs_setxattr+0x128/0x130 setxattr+0x248/0x600 path_setxattr+0x108/0x120 sys_setxattr+0x28/0x40 system_call+0x5c/0x70 Instruction dump: 7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000 4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040 The instruction dump decodes as: subfic r6,r5,8 rlwinm r6,r6,3,0,28 ldbrx r9,0,r3 ldbrx r10,0,r4 <- Which shows us doing an 8 byte load from c00000062ac3fff9, which crosses the page boundary at c00000062ac40000 and faults. It's not OK for memcmp to read past the end of the source or destination buffers if that would cross a page boundary, because we don't know that the next page is mapped. As pointed out by Segher, we can read past the end of the source or destination as long as we don't cross a 4K boundary, because that's our minimum page size on all platforms. The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get there we know that s1 is 8-byte aligned and we have at least 1 byte to read, so a single 8-byte load won't read past the end of s1 and cross a page boundary. But we have to be more careful with s2. So check if it's within 8 bytes of a 4K boundary and if so go to the byte-by-byte loop. Fixes: 2d9ee327adce ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Tested-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-24x86/resctrl: Remove unused variablePeng Hao
Variable "struct rdt_resource *r" is set but not used. So remove it. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1552152584-26087-1-git-send-email-peng.hao2@zte.com.cn
2019-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Prevent potential NULL pointer dereferences in the HPET and HyperV code - Exclude the GART aperture from /proc/kcore to prevent kernel crashes on access - Use the correct macros for Cyrix I/O on Geode processors - Remove yet another kernel address printk leak - Announce microcode reload completion as requested by quite some people. Microcode loading has become popular recently. - Some 'Make Clang' happy fixlets - A few cleanups for recently added code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/gart: Exclude GART aperture from kcore x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error x86/mm/pti: Make local symbols static x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors x86/microcode: Announce reload operation's completion x86/hyperv: Prevent potential NULL pointer dereference x86/hpet: Prevent potential NULL pointer dereference x86/lib: Fix indentation issue, remove extra tab x86/boot: Restrict header scope to make Clang happy x86/mm: Don't leak kernel addresses x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
2019-03-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Remove secondary GIC support on systems w/o device-tree support - A set of small fixlets in various irqchip drivers - static and fall-through annotations - Kernel doc and typo fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Mark expected switch case fall-through genirq/devres: Remove excess parameter from kernel doc irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static irqchip/mbigen: Don't clear eventid when freeing an MSI irqchip/stm32: Don't set rising configuration registers at init irqchip/stm32: Don't clear rising/falling config registers at init dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support irqchip/mmp: Make mmp_irq_domain_ops static irqchip/brcmstb-l2: Make two init functions static genirq: Fix typo in comment of IRQD_MOVE_PCNTXT irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp irqchip/gic: Drop support for secondary GIC in non-DT systems irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
2019-03-23x86/gart: Exclude GART aperture from kcoreKairui Song
On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash. vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory. Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet. Suggested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Dave Young <dyoung@redhat.com> Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
2019-03-22Merge tag 'powerpc-5.1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a boot failure on 32-bit, introduced during the merge window. A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC to jump forward and backward. Our spectre_v2 reporting was a bit confusing due to a bug I introduced. On some systems it was reporting that the count cache was disabled and also that we were flushing the count cache on context switch. Only the former is true, and given that the count cache is disabled it doesn't make any sense to flush it. No one reported it, so presumably the presence of any mitigation is all people check for. Finally a small build fix for zsmalloc on 32-bit. Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter Roeck, Michael Neuling" * tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/security: Fix spectre_v2 reporting powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32 powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038
2019-03-22Merge branch 'x86/cpu' into x86/urgentThomas Gleixner
Merge the forgotten cleanup patch for the new file, so the mess does not propagate further.