| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
multiple byte-accesses into one word-access.
- Add missing HWPOISON page fault handler code. I completely missed
that when I added HWPOISON support during this merge window and it
only showed up now with the madvise07 LTP test case.
- Fix backtrace unwinding to stop when stack start has been reached.
- Issue warning if initrd has been loaded into memory regions with
broken RAM modules.
- Fix HPMC handler (parisc hardware fault handler) to comply with
architecture specification.
- Avoid compiler warnings about too large frame sizes.
- Minor init-section fixes.
* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Unbreak bootloader due to gcc-7 optimizations
parisc: Reintroduce option to gzip-compress the kernel
parisc: Add HWPOISON page fault handler code
parisc: Move init_per_cpu() into init section
parisc: Check if initrd was loaded into broken RAM
parisc: Add PDCE_CHECK instruction to HPMC handler
parisc: Add wrapper for pdc_instr() firmware function
parisc: Move start_parisc() into init section
parisc: Stop unwinding at start of stack
parisc: Fix too large frame size warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1)
(John Keeping)
- fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1)
(Lorenzo Pieralisi)
* tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: endpoint: Use correct "end of test" interrupt
MIPS: PCI: Move map_irq() hooks out of initdata
|
|
Pull arch/tile fixes from Chris Metcalf:
"These are a code cleanup and config cleanup, respectively"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: array underflow in setup_maxnodemem()
tile: defconfig: Cleanup from old Kconfig options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- #ifdef CONFIG_EFI around __efi_fpsimd_begin/end
- Assembly code alignment reduced to 4 bytes from 16
- Ensure the kernel is compiled for LP64 (there are some arm64
compilers around defaulting to ILP32)
- Fix arm_pmu_acpi memory leak on the error path
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
arm64: ensure the kernel is compiled for LP64
arm64: relax assembly code alignment from 16 byte to 4 byte
arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
|
|
Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into
word-wise accesses if the 32-bit integer output_len is declared as
external. This panics then the bootloader since we don't have the
unaligned access fault trap handler installed during boot time.
Avoid this optimization by declaring output_len as byte-aligned and thus
unbreak the bootloader code.
Additionally, compile the boot code optimized for size.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
By adding the feature to build the kernel as self-extracting
executeable, the possibility to simply compress the kernel with gzip was
lost.
This patch now reintroduces this possibilty again and leaves it up to
the user to decide how the kernel should be built.
The palo bootloader is able to natively load both formats.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Commit 24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added
the necessary constants to handle hardware-poisoning. Those were needed to
support the page deallocation feature from firmware.
But I completely missed to add the relevant fault handler code. This now
showed up when I ran the madvise07 testcase from the Linux Test Project,
which failed with a kernel BUG at arch/parisc/mm/fault.c:320.
With this patch the parisc kernel now behaves like other platforms and
gives the same kernel syslog warnings when poisoning pages.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
While scanning the PDT for reported broken memory modules, warn if the
initrd was coincidentally loaded into bad memory.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
According to the programming note at page 1-31 of the PA 1.1 Firmware
Architecture document, one should use the PDC_INSTR firmware function to
get the instruction that invokes a PDCE_CHECK in the HPMC handler. This
patch follows this note and sets the instruction which has been a nop up
until now.
Testing on a C3000 and C8000 showed that this firmware call isn't
implemented on those machines, so maybe it's only needed on older ones.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Check stack pointer if we are reaching the stack end and stop unwinding
if we do. This fixes early backtraces and avoids showing unrealistic
call stacks.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A fix for a missing __init annotation and two cleanup patches"
* tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen, arm64: drop dummy lookup_address()
xen: don't compile pv-specific parts if XEN_PV isn't configured
xen: x86: mark xen_find_pt_base as __init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"It turns out our single-fix pull from last week was too good to be
true. I missed a few fixes in that pull that had already come in
because I was on leave, but also we hadn't found the bugs yet. So this
week it's a bit bigger, though not ridiculous. Hopefully things will
settle down from here on.
Four fixes for the new instruction emulation code. A fix for CPU
offline on bare metal machines when certain idle states are not
supported, and a fix for a device_node refcounting oops during CPU
hotplug, caused by recent changes.
Going to stable are a fix for an oops during core dump on machines
that have TM (Transactional Memory) disabled. Reordering some EEH
initialisation to avoid trashing memory, and another device_node
refcounting fix.
And a few other minor things.
Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham
R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber,
Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak
Desai, Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR
powerpc/eeh: Create PHB PEs after EEH is initialized
powerpc/kprobes: Update optprobes to use emulate_update_regs()
powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline
powerpc/sstep: mullw should calculate a 64 bit signed result
powerpc/sstep: Fix issues with mcrf
powerpc/sstep: Fix issues with set_cr0()
powerpc/tm: Flush TM only if CPU has TM feature
powerpc/sysrq: Fix oops whem ppmu is not registered
powerpc/configs: Update for CONFIG_SND changes
powerpc/e6500: Update machine check for L1D cache err
|
|
git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
- Fix a build error on MSP71xx which used to rely on somehow magically
<asm/setup.h> being pulled in which no longer happens.
- Fix the __write_64bit_c0_split inline assembler where there was the
theoretical possibility of GCC interpret the constraints such that
bad code could result.
- A __init was causing section mismatch errors on Alchemy. Just to be
on the safe side, Manuel's patch does away with all of them.
- Fix perf event init.
* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: PCI: fix pcibios_map_irq section mismatch
MIPS: Fix input modify in __write_64bit_c0_split()
MIPS: MSP71xx: Include asm/setup.h
MIPS: Fix perf event init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A couple of bug fixes: memory management, perf, cio, dasd and
scm_blk.
- A larger change in regard to the CPU topology to improve performance
for systems running under z/VM or KVM.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: enable / disable topology dynamically
s390/topology: alternative topology for topology-less machines
s390/mm: fix write access check in gup_huge_pmd()
s390/mm: make pmdp_invalidate() do invalidation only
s390/cio: recover from bad paths
s390/scm_blk: consistently use blk_status_t as error type
s390/dasd: fix race during dasd initialization
s390/perf: fix bug when creating per-thread event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix compiler warnings in inside-secure
- Fix LS1021A support in caam
- Avoid using RBP in x86 crypto code
- Fix bug in talitos that prevents hashing with algif
- Fix bugs talitos hashing code that cause incorrect hash result
- Fix memory freeing path bug in drbg
- Fix af_alg crash when two SG lists are chained
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - update correct dst SGL entry
crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel
crypto: inside-secure - fix gcc-4.9 warnings
crypto: talitos - Don't provide setkey for non hmac hashing algs
crypto: talitos - fix hashing
crypto: talitos - fix sha224
crypto: x86/twofish - Fix RBP usage
crypto: sha512-avx2 - Fix RBP usage
crypto: x86/sha256-ssse3 - Fix RBP usage
crypto: x86/sha256-avx2 - Fix RBP usage
crypto: x86/sha256-avx - Fix RBP usage
crypto: x86/sha1-ssse3 - Fix RBP usage
crypto: x86/sha1-avx2 - Fix RBP usage
crypto: x86/des3_ede - Fix RBP usage
crypto: x86/cast6 - Fix RBP usage
crypto: x86/cast5 - Fix RBP usage
crypto: x86/camellia - Fix RBP usage
crypto: x86/blowfish - Fix RBP usage
crypto: drbg - fix freeing of resources
|
|
Drop the __init from pcibios_map_irq() to make this section mis-
match go away:
WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq()
The function pcibios_scanbus() references
the function __init pcibios_map_irq().
This is often because pcibios_scanbus lacks a __init
annotation or the annotation of pcibios_map_irq is wrong.
Run-Tested only on Alchemy.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17267/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The inline asm in __write_64bit_c0_split() modifies the 64-bit input
operand by shifting the high register left by 32, and constructing the
full 64-bit value in the low register (even on a 32-bit kernel), so if
that value is used again it could cause breakage as GCC would assume the
registers haven't changed when they have.
To quote the GCC extended asm documentation:
> Warning: Do not modify the contents of input-only operands (except for
> inputs tied to outputs). The compiler assumes that on exit from the
> asm statement these operands contain the same values as they had
> before executing the statement.
Avoid modifying the input by using a temporary variable as an output
which is modified instead of the input and not otherwise used. The asm
is always __volatile__ so GCC shouldn't optimise it out. The low
register of the temporary output is written before the high register of
the input is read, so we have two constraint alternatives, one where
both use the same registers (for when the input value isn't subsequently
used), and one with an early clobber on the output in case the low
output uses the same register as the high input. This allows the
resulting assembly to remain mostly unchanged.
A diff of a MIPS32r6 kernel reveals only three differences, two in
relation to write_c0_r10k_diag() in cpu_probe() (register allocation
rearranged slightly but otherwise identical), and one in relation to
write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the
octeon CPU is only supported on 64-bit kernels where
__write_64bit_c0_split() isn't used so that shouldn't matter in
practice. So there currently doesn't appear to be anything broken by
this bug.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17315/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
msp71xx_defconfig can not be built at the in v4.14-rc1
arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration]
I don't know what caused the regression, but including the right
header is the obvious fix.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17309/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
A reference to the parent device node is held by add_dt_node() for the
node to be added. If the call to dlpar_configure_connector() fails
add_dt_node() returns ENOENT and that reference is not freed.
Add a call to of_node_put(parent_dn) prior to bailing out after a
failed dlpar_configure_connector() call.
Fixes: 8d5ff320766f ("powerpc/pseries: Make dlpar_configure_connector parent node aware")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node
dependency on full path") reworked dlpar_attach_node() to no longer
look up the parent node "/cpus", but instead to have the parent node
passed by the caller in the function parameter list.
As a result dlpar_attach_node() is no longer responsible for freeing
the reference to the parent node. However, commit 215ee763f8cb failed
to remove the of_node_put(parent) call in dlpar_attach_node(), or to
take into account that the reference to the parent in the caller
dlpar_cpu_add() needs to be held until after dlpar_attach_node()
returns.
As a result doing repeated cpu add/remove dlpar operations will
eventually result in the following error:
OF: ERROR: Bad of_node_put() on /cpus
CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1
Call Trace:
dump_stack+0x15c/0x1f8 (unreliable)
of_node_release+0x1a4/0x1c0
kobject_put+0x1a8/0x310
kobject_del+0xbc/0xf0
__of_detach_node_sysfs+0x144/0x210
of_detach_node+0xf0/0x180
dlpar_detach_node+0xc4/0x120
dlpar_cpu_remove+0x280/0x560
dlpar_cpu_release+0xbc/0x1b0
arch_cpu_release+0x6c/0xb0
cpu_release_store+0xa0/0x100
dev_attr_store+0x68/0xa0
sysfs_kf_write+0xa8/0xf0
kernfs_fop_write+0x2cc/0x400
__vfs_write+0x5c/0x340
vfs_write+0x1a8/0x3d0
SyS_write+0xa8/0x1a0
system_call+0x58/0x6c
Fix the issue by removing the of_node_put(parent) call from
dlpar_attach_node(), and ensuring that the reference to the parent
node is properly held and released by the caller dlpar_cpu_add().
Fixes: 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
[mpe: Add a comment in the code and frob the change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Otherwise we end up not yet having computed the right diag data size
on powernv where EEH initialization is delayed, thus causing memory
corruption later on when calling OPAL.
Fixes: 5cb1f8fdddb7 ("powerpc/powernv/pci: Dynamically allocate PHB diag data")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a new sysctl file /proc/sys/s390/topology which displays if
topology is on (1) or off (0) as specified by the "topology=" kernel
parameter.
This allows to change topology information during runtime and
configuring it via /etc/sysctl.conf instead of using the kernel line
parameter.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If running on machines that do not provide topology information we
currently generate a "fake" topology which defines the maximum
distance between each cpu: each cpu will be put into an own drawer.
Historically this used to be the best option for (virtual) machines in
overcommited hypervisors.
For some workloads however it is better to generate a different
topology where all cpus are siblings within a package (all cpus are
core siblings). This shows performance improvements of up to 10%,
depending on the workload.
In order to keep the current behaviour, but also allow to switch to
the different core sibling topology use the existing "topology="
kernel parameter:
Specifying "topology=on" on machines without topology information will
generate the core siblings (fake) topology information, instead of the
default topology information where all cpus have the maximum distance.
On machines which provide topology information specifying
"topology=on" does not have any effect.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Optprobes depended on an updated regs->nip from analyse_instr() to
identify the location to branch back from the optprobes trampoline.
However, since commit 3cdfcbfd32b9d ("powerpc: Change analyse_instr so
it doesn't modify *regs"), analyse_instr() doesn't update the registers
anymore. Due to this, we end up branching back from the optprobes
trampoline to the same branch into the trampoline resulting in a loop.
Fix this by calling out to emulate_update_regs() before using the nip.
Additionally, explicitly compare the return value from analyse_instr()
to 1, rather than just checking for !0 so as to guard against any
future changes to analyse_instr() that may result in -1 being returned
in more scenarios.
Fixes: 3cdfcbfd32b9d ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into fixes
Merge one commit from Scott which I missed while away.
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R13 instead of RBP. Both are callee-saved registers, so the
substitution is straightforward.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Mix things up a little bit to get rid of the RBP usage, without hurting
performance too much. Use RDI instead of RBP for the TBL pointer. That
will clobber CTX, so spill CTX onto the stack and use R12 to read it in
the outer loop. R12 is used as a non-persistent temporary variable
elsewhere, so it's safe to use.
Also remove the unused y4 variable.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the TBL register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
There's no need to use RBP as a temporary register for the TBL value,
because it always stores the same value: the address of the K256 table.
Instead just reference the address of K256 directly.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the TBL register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the REG_D register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R11 instead of RBP. Since R11 isn't a callee-saved register, it
doesn't need to be saved and restored on the stack.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use RSI instead of RBP for RT1. Since RSI is also used as a the 'dst'
function argument, it needs to be saved on the stack until the argument
is needed.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R15 instead of RBP. R15 can't be used as the RID1 register because
of x86 instruction encoding limitations. So use R15 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R15 instead of RBP. R15 can't be used as the RID1 register because
of x86 instruction encoding limitations. So use R15 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R12 instead of RBP. Both are callee-saved registers, so the
substitution is straightforward.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R12 instead of RBP. R12 can't be used as the RT0 register because
of x86 instruction encoding limitations. So use R12 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned")
modified mipspmu_event_init() to cast the struct perf_event cpu field to
an unsigned integer before it is compared with nr_cpumask_bits (and
*ahem* did so without copying the linux-mips mailing list or any MIPS
developers...). This is broken because the cpu field may be -1 for
events which follow a process rather than being affine to a particular
CPU. When this is the case the cast to an unsigned int results in a
value equal to ULONG_MAX, which is always greater than nr_cpumask_bits
so we always fail mipspmu_event_init() and return -ENODEV.
The check against nr_cpumask_bits seems nonsensical anyway, so this
patch simply removes it. The cpu field is going to either be -1 or a
valid CPU number. Comparing it with nr_cpumask_bits is effectively
checking that it's a valid cpu number, but it seems safe to rely on the
core perf events code to ensure that's the case.
The end result is that this fixes use of perf on MIPS when not
constraining events to a particular CPU, and fixes the "perf list hw"
command which fails to list any events without this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned")
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.12+
Patchwork: https://patchwork.linux-mips.org/patch/17323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via
stop-api only on Hotplug") clears the PECE1 bit of the LPCR via
stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on
an offlined CPU which is in a deep stop state.
In the case where the stop-api support is found to be lacking, the
commit 785a12afdb4a ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT
states when stop-api fails") disables deep states that lose hypervisor
context. Thus in this case, the offlined CPU will be put to some
shallow idle state.
However, we currently unconditionally clear the PECE1 in LPCR via
stop-api during CPU-Hotplug even when deep states are disabled due to
stop-api failure.
Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug
*only* when the offlined CPU will be put to a deep state that loses
hypervisor context.
Fixes: 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mullw should do a 32 bit signed multiply and create a 64 bit signed
result. It currently truncates the result to 32 bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mcrf broke when we changed analyse_instr() to not modify the register
state. The instruction writes to the CR, so we need to store the result
in op->ccval, not op->val.
Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
set_cr0() broke when we changed analyse_instr() to not modify the
register state. Instead of looking at regs->gpr[x] which has not
been updated yet, we need to look at op->val.
Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit cd63f3c ("powerpc/tm: Fix saving of TM SPRs in core dump")
added code to access TM SPRs in flush_tmregs_to_thread(). However
flush_tmregs_to_thread() does not check if TM feature is available on
CPU before trying to access TM SPRs in order to copy live state to
thread structures. flush_tmregs_to_thread() is indeed guarded by
CONFIG_PPC_TRANSACTIONAL_MEM but it might be the case that kernel
was compiled with CONFIG_PPC_TRANSACTIONAL_MEM enabled and ran on
a CPU without TM feature available, thus rendering the execution
of TM instructions that are treated by the CPU as illegal instructions.
The fix is just to add proper checking in flush_tmregs_to_thread()
if CPU has the TM feature before accessing any TM-specific resource,
returning immediately if TM is no available on the CPU. Adding
that checking in flush_tmregs_to_thread() instead of in places
where it is called, like in vsr_get() and vsr_set(), is better because
avoids the same problem cropping up elsewhere.
Cc: stable@vger.kernel.org # v4.13+
Fixes: cd63f3c ("powerpc/tm: Fix saving of TM SPRs in core dump")
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Kernel crashes if power pmu is not registered and user tries to dump
regs with 'echo p > /proc/sysrq-trigger'. Sample log:
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xc0000000000d52f0
NIP [c0000000000d52f0] perf_event_print_debug+0x10/0x230
LR [c00000000058a938] sysrq_handle_showregs+0x38/0x50
Call Trace:
printk+0x38/0x4c (unreliable)
__handle_sysrq+0xe4/0x270
write_sysrq_trigger+0x64/0x80
proc_reg_write+0x80/0xd0
__vfs_write+0x40/0x200
vfs_write+0xc8/0x240
SyS_write+0x60/0x110
system_call+0x58/0x6c
Fixes: 5f6d0380c640 ("powerpc/perf: Define perf_event_print_debug() to print PMU register values")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we
lose some of the SND symbols.
And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build")
reorganised things, which causes the churn.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull KVM fixes from Radim Krčmář:
- fix build without CONFIG_HAVE_KVM_IRQ_ROUTING
- fix NULL access in x86 CR access
- fix race with VMX posted interrups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interrupt
KVM: VMX: do not change SN bit in vmx_update_pi_irte()
KVM: x86: Fix the NULL pointer parameter in check_cr_write()
Revert "KVM: Don't accept obviously wrong gsi values via KVM_IRQFD"
|
