summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-01-28sh: Consolidate CPU features in Kconfig.cpu.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh64: Kill off arch/sh64/oprofile.Paul Mundt
The same implementation exists in arch/sh/oprofile, so get rid of this version. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move sh64 board defconfigs to arch/sh/configs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move sh64 boards to arch/sh/.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Switch Kconfig.sh64 to use arch/sh/mm/Kconfig.Paul Mundt
Consolidates the HUGETLB definitions and others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Plug SH-5 in to arch/sh/Makefile.Paul Mundt
Adds the ISA tuning and a lib64 rule. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move arch/sh64/lib to arch/sh/lib64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move the sh64 Kconfig to arch/sh/Kconfig.sh64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add a SUPERH32 config symbol.Paul Mundt
We need to differentiate from SUPERH64, so add a SUPERH32 for regular sh. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move CPU subtypes to Kconfig.sh.Paul Mundt
We intend to share the mm options, so move the SH-only subtypes up a level. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Rename Kconfig to Kconfig.sh.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh64: Use the generic rtc-sh driver.Paul Mundt
Rip out the sh64-specific RTC bits, use rtc-sh instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits) MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic [Blackfin] arch: remove old I2C BF54x porting. [Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it. [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver [Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up [Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core. [Blackfin] arch: Add proper SW System Reset delay sequence [Blackfin] arch: Update copyright date [Blackfin] arch: GPIO API cleanup and anomaly update [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface [Blackfin] arch: Initial checkin of the memory protection support. [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option [Blackfin] arch: Add some comments - fix semicolons [Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/ [Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted [Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards [Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel [Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on [Blackfin] arch: update to latest anomaly sheets ...
2008-01-27i2c-au1550: Convert to platform driverManuel Lauss
Convert the i2c-au1550 bus driver to platform driver, and register a platform device for the Alchemy Db/Pb series of boards. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-pxa: Add polling transferMike Rapoport
Add polling I2C transfer implementation for PXA I2C. This is needed for cases where I2C transactions have to occur at times interrups are disabled. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c/tps65010: move header to <linux/i2c/...>David Brownell
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: normal_i2c can be made const (remaining drivers)Jean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27ixp4xx-i2c-gpioMichael-Luke Jones
Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing the arch-neutral GPIO API (linux/i2c-gpio.h). Tested by the nslu2-linux and openwrt projects in public firmware releases. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Acked-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: the scheduled I2C RTC driver removalAdrian Bunk
This patch contains the scheduled removal of legacy I2C RTC drivers with replacement drivers. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26[S390] replace lock_cpu_hotplug with get_online_cpusMartin Schwidefsky
Git commit 86ef5c9a8edd78e6bf92879f32329d89b2d55b5a forgot a few lock_cpu_hotplug/unlock_cpu_hotplug pairs in arch/s390/kernel/smp.c Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] constify function pointer tables.Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] do local_irq_restore while spinning in spin_lock_irqsave.Hisashi Hifumi
In s390's spin_lock_irqsave, interrupts remain disabled while spinning. In other architectures like x86 and powerpc, interrupts are re-enabled while spinning if IRQ is not masked before spin_lock_irqsave is called. The following patch re-enables interrupts through local_irq_restore while spinning for a lock acquisition. This can improve system response. [heiko.carstens@de.ibm.com: removed saving of pc] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] add smp_call_function_maskCarsten Otte
This patch adds the s390 variant for smp_call_function_mask(). The implementation is pretty straight forward using the wrapper __smp_call_function_map() which already takes a cpumask_t argument. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Remove TOPDIR from MakefileWANG Cong
This patch removes TOPDIR from arch/s390/kernel/Makefile. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] single-step cleanupRoland McGrath
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Move NOTES and BUG_TABLE.Martin Schwidefsky
Move the NOTES and BUG_TABLE section in the linker script to the read-only sections right after the text section. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] arch/s390/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.Michael Holzheu
This patch fixes a problem with the following scenario: 1. Linux booted from DASD "A" 2. Reboot from DASD "B" using "/sys/firmware/reipl/ccw/device" 3. Reboot DASD "B" Without this patch in step 3 on newer s390 systems under LPAR instead of DASD "B", DASD "A" will be booted. The reason is that in step 2 we use CCW reipl and in step 3 we use DIAG308 (subcode 3) reipl. DIAG308 does not notice the CCW reipl and still thinks that it has to reboot DASD "A". Before applying this fix, ensure to have MCF RJ9967101E or z9 GA3 base driver installed. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] vmemmap: allocate struct pages before 1:1 mappingChristian Borntraeger
We have seen an oops in an OOM situation, where show_mem tried to access the struct page of a dcss segment. The vmemmap code has already created the 1:1 mapping but failed allocating the struct pages. In the OOM case, show_mem now walks the memory. It uses pfn_valid to detect if it may access the struct page. In the case described above, the mapping was established and pfn_valid returned true. As the struct pages were not allocated, the kernel oopsed. We have to ensure that we have created the struct pages, before we add a mapping pointing to the pages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Initialize sclp_ipl_infoMichael Holzheu
The sclp ipl information has not been initialized. Therefore the ipl loadparm and the "has_dump" flag have not been set correctly. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Allocate and free cpu lowcores and stacks when needed/possible.Heiko Carstens
No need to preallocate the per cpu lowcores and stacks. Savings are 28-32k per offline cpu. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Load disabled wait psw instead of stopping cpu on halt.Michael Holzheu
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] kernel: Shutdown Actions InterfaceMichael Holzheu
In case of a kernel panic it is currently possible to specify that a dump should be created, the system should be rebooted or stopped. Virtual sysfs files under the directory /sys/firmware/ are used for that configuration. In addition to that, there are kernel parameters 'vmhalt', 'vmpoff' and 'vmpanic', which can be used to specify z/VM commands, which are automatically executed in case of halt, power off or a kernel panic. This patch combines both functionalities and allows to specify the z/VM CP commands also via sysfs attributes. In addition to that, it enhances the existing handling of shutdown triggers (e.g. halt or panic) and associated shutdown actions (e.g. dump or reipl) and makes it more flexible. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] arch/s390: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] crypto: move s390 Kconfig options.Jan Glauber
Move s390 crypto Kconfig options to drivers/crypto/Kconfig to have all hardware crypto devices in one place. This also makes messing up the kernel source tree easier for some people. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Remove owner_pc member from raw_spinlock_t.Heiko Carstens
Used to contain the address of the holder of the lock. But since the spinlock code is not inlined anymore all locks contain the same address anyway. And since in addtition nobody complained about that for ages its obviously unused. So remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of HOLES_IN_ZONE requirement.Heiko Carstens
Align everything to MAX_ORDER so we can get rid of the extra checks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Print kernel version in dump_stack() and show_regs().Heiko Carstens
Also print PREEMPT and/or SMP if the kernel was configured that way. Makes s390 look a bit more like other architectures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Change vmalloc defintionsChristian Borntraeger
Currently the vmalloc area starts at a dynamic address depending on the memory size. There was also an 8MB security hole after the physical memory to catch out-of-bounds accesses. We can simplify the code by putting the vmalloc area explicitely at the top of the kernel mapping and setting the vmalloc size to a fixed value of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc area will be used for the vmem_map. This leaves an area of 96MB/1GB for normal vmalloc allocations. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Fix tlb flushing with idte.Martin Schwidefsky
The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Standby cpu activation/deactivation.Heiko Carstens
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-25sched: latencytop supportArjan van de Ven
LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: high-res preemption tickPeter Zijlstra
Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: remove printk_clock references from ia64Ingo Molnar
remove remaining printk_clock references from ia64. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: remove printk_clock()Ingo Molnar
printk_clock() is obsolete - it has been replaced with cpu_clock(). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] extint: Set initial irq type to low level [AVR32] extint: change set_irq_type() handling [AVR32] NMI debugging [AVR32] constify function pointer tables [AVR32] ATNGW100: Update defconfig [AVR32] ATSTK1002: Update defconfig [AVR32] Kconfig: Choose daughterboard instead of CPU [AVR32] Add support for ATSTK1003 and ATSTK1004 [AVR32] Clean up external DAC setup code [AVR32] ATSTK1000: Move gpio-leds setup to setup.c [AVR32] Add support for AT32AP7001 and AT32AP7002 [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg [AVR32] Oprofile support [AVR32] Include instrumentation menu Disable VGA text console for AVR32 architecture [AVR32] Enable debugging only when needed ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME [AVR32] Remove redundant try_to_freeze() call from do_signal() [AVR32] Drop GFP_COMP for DMA memory allocations
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...