summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-09-08KVM: fix i8259 oops when no vcpus are onlineAvi Kivity
If there are no vcpus, found will be NULL. Check before doing anything with it. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-09-08KVM: x86 emulator: fix regression with cmpxchg8b on i386 hostsAvi Kivity
operand::val and operand::orig_val are 32-bit on i386, whereas cmpxchg8b operands are 64-bit. Fix by adding val64 and orig_val64 union members to struct operand, and using them where needed. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-08ARM: Ensure PTE modifications via dma_alloc_coherent are visibleRussell King
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by: Dave Hylands <dhylands@gmail.com> Tested-by: Dave Hylands <dhylands@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08ARM: 6359/1: ep93xx: move clock initialization earlierMika Westerberg
Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"Russell King
This reverts commit 4fa5518, which causes a compilation regression for IXP4xx platforms. Reported-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: bus speed strings should be const PCI hotplug: Fix build with CONFIG_ACPI unset PCI: PCIe: Remove the port driver module exit routine PCI: PCIe: Move PCIe PME code to the pcie directory PCI: PCIe: Disable PCIe port services during port initialization PCI: PCIe: Ask BIOS for control of all native services at once ACPI/PCI: Negotiate _OSC control bits before requesting them ACPI/PCI: Do not preserve _OSC control bits returned by a query ACPI/PCI: Make acpi_pci_query_osc() return control bits ACPI/PCI: Reorder checks in acpi_pci_osc_control_set() PCI: PCIe: Introduce commad line switch for disabling port services PCI: PCIe AER: Introduce pci_aer_available() x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs
2010-09-07Merge branch 'for-linus' of git://android.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.kernel.org/kernel/tegra: [ARM] tegra: Add ZRELADDR default for ARCH_TEGRA
2010-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Fix printk format errors alpha: convert perf_event to use local_t Fix call to replaced SuperIO functions alpha: remove homegrown L1_CACHE_ALIGN macro
2010-09-07Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Correct rtas_data_buf locking in dlpar code powerpc/85xx: Add P1021 PCI IDs and quirks arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leak arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmap fsl_rio: fix compile errors powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblock powerpc/85xx: Fix compilation of mpc85xx_mds.c powerpc: Don't use kernel stack with translation off powerpc/perf_event: Reduce latency of calling perf_event_do_pending powerpc/kexec: Adds correct calling convention for kexec purgatory
2010-09-07m68knommu: fix missing linker segmentsGreg Ungerer
Recent changes to linker segments that hold per-cpu data broke linking for m68knommu targets: LD vmlinux /usr/local/bin/m68k-uclinux-ld.real: error: no memory region specified for loadable section `.data..shared_aligned' Add missing segments into the m68knommu linker script. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07h8300: Fix missing consts in kernel_execve()David Howells
Fix missing consts in h8300's kernel_execve(): arch/h8300/kernel/sys_h8300.c: In function 'kernel_execve': arch/h8300/kernel/sys_h8300.c:59: warning: initialization from incompatible pointer type arch/h8300/kernel/sys_h8300.c:60: warning: initialization from incompatible pointer type Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07h8300: Fix die()David Howells
Fix h8300's die() to take care of a number of problems: CC arch/h8300/kernel/traps.o In file included from arch/h8300/include/asm/bitops.h:10, from include/linux/bitops.h:22, from include/linux/kernel.h:17, from include/linux/sched.h:54, from arch/h8300/kernel/traps.c:18: arch/h8300/include/asm/system.h:136: warning: 'struct pt_regs' declared inside parameter list arch/h8300/include/asm/system.h:136: warning: its scope is only this definition or declaration, which is probably not what you want arch/h8300/kernel/traps.c:100: error: conflicting types for 'die' arch/h8300/include/asm/system.h:136: error: previous declaration of 'die' was here make[2]: *** [arch/h8300/kernel/traps.o] Error 1 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07h8300: IRQ flags should be stored in an unsigned longDavid Howells
Fix h8300's asm/atomic.h to store the IRQ flags in an unsigned long to deal with warnings of the following type: arch/h8300/include/asm/atomic.h: In function 'atomic_add_return': arch/h8300/include/asm/atomic.h:22: warning: comparison of distinct pointer types lacks a cast arch/h8300/include/asm/atomic.h:24: warning: comparison of distinct pointer types lacks a cast Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07AT91: change dma resource indexNicolas Ferre
Reported-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-05x86, mcheck: Avoid duplicate sysfs links/files for thresholding banksAndreas Herrmann
kobject_add_internal failed for threshold_bank2 with -EEXIST, don't try to register things with the same name in the same directory: Pid: 1, comm: swapper Tainted: G W 2.6.31 #1 Call Trace: [<ffffffff81161b07>] ? kobject_add_internal+0x156/0x180 [<ffffffff81161cc0>] ? kobject_add+0x66/0x6b [<ffffffff81161793>] ? kobject_init+0x42/0x82 [<ffffffff81161cf9>] ? kobject_create_and_add+0x34/0x63 [<ffffffff81393963>] ? threshold_create_bank+0x14f/0x259 [<ffffffff8139310a>] ? mce_create_device+0x8d/0x1b8 [<ffffffff81646497>] ? threshold_init_device+0x3f/0x80 [<ffffffff81646458>] ? threshold_init_device+0x0/0x80 [<ffffffff81009050>] ? do_one_initcall+0x4f/0x143 [<ffffffff816413a0>] ? kernel_init+0x14c/0x1a2 [<ffffffff8100c8da>] ? child_rip+0xa/0x20 [<ffffffff81641254>] ? kernel_init+0x0/0x1a2 [<ffffffff8100c8d0>] ? child_rip+0x0/0x20 kobject_create_and_add: kobject_add error: -17 (Probably the for_each_cpu loop should be entirely removed.) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100827092006.GB5348@loge.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-05x86: Fix the address space annotations of iomap_atomic_prot_pfn()Francisco Jerez
This patch fixes the sparse warnings when the return pointer of iomap_atomic_prot_pfn() is used as an argument of iowrite32() and friends. Signed-off-by: Francisco Jerez <currojerez@riseup.net> LKML-Reference: <1283633804-11749-1-git-send-email-currojerez@riseup.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Try to handle unknown nmis with an enabled PMURobert Richter
When the PMU is enabled it is valid to have unhandled nmis, two events could trigger 'simultaneously' raising two back-to-back NMIs. If the first NMI handles both, the latter will be empty and daze the CPU. The solution to avoid an 'unknown nmi' massage in this case was simply to stop the nmi handler chain when the PMU is enabled by stating the nmi was handled. This has the drawback that a) we can not detect unknown nmis anymore, and b) subsequent nmi handlers are not called. This patch addresses this. Now, we check this unknown NMI if it could be a PMU back-to-back NMI. Otherwise we pass it and let the kernel handle the unknown nmi. This is a debug log: cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591 Uhhuh. NMI received for unknown reason 00 on CPU 6. Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Deltas: nmi #32334 340186 nmi #32335 1327704 nmi #32336 1819 <<<< back-to-back nmi [1] nmi #32337 85961 nmi #32338 284507 nmi #32339 1578809 nmi #32340 217616 nmi #32341 1798 <<<< back-to-back nmi [2] nmi #32342 240913 nmi #32343 1512809 nmi #32344 116672 nmi #32345 412453 nmi #32346 1462095 <<<< 1st nmi (standard) handling 2 counters nmi #32347 2046 <<<< 2nd nmi (back-to-back) handling one counter nmi #32348 1773 <<<< 3rd nmi (back-to-back) handling no counter! [3] For back-to-back nmi detection there are the following rules: The PMU nmi handler was handling more than one counter and no counter was handled in the subsequent nmi (see [1] and [2] above). There is another case if there are two subsequent back-to-back nmis [3]. The 2nd is detected as back-to-back because the first handled more than one counter. If the second handles one counter and the 3rd handles nothing, we drop the 3rd nmi because it could be a back-to-back nmi. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Fix handle_irq return valuesPeter Zijlstra
Now that we rely on the number of handled overflows, ensure all handle_irq implementations actually return the right number. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: robert.richter@amd.com Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Fix accidentally ack'ing a second event on intel perf counterDon Zickus
During testing of a patch to stop having the perf subsytem swallow nmis, it was uncovered that Nehalem boxes were randomly getting unknown nmis when using the perf tool. Moving the ack'ing of the PMI closer to when we get the status allows the hardware to properly re-set the PMU bit signaling another PMI was triggered during the processing of the first PMI. This allows the new logic for dealing with the shortcomings of multiple PMIs to handle the extra NMI by 'eat'ing it later. Now one can wonder why are we getting a second PMI when we disable all the PMUs in the begining of the NMI handler to prevent such a case, for that I do not know. But I know the fix below helps deal with this quirk. Tested on multiple Nehalems where the problem was occuring. With the patch, the code now loops a second time to handle the second PMI (whereas before it was not). Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: robert.richter@amd.com Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-02ARM: 6352/1: perf: fix event validationWill Deacon
The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Reported-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7Catalin Marinas
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02powerpc/pseries: Correct rtas_data_buf locking in dlpar codeNathan Fontenot
The dlpar code can cause a deadlock to occur when making the RTAS configure-connector call. This occurs because we make kmalloc calls, which can block, while parsing the rtas_data_buf and holding the rtas_data_buf_lock. This an cause issues if someone else attempts to grab the rtas_data_bug_lock. This patch alleviates this issue by copying the contents of the rtas_data_buf to a local buffer before parsing. This allows us to only hold the rtas_data_buf_lock around the RTAS configure-connector calls. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-01[ARM] tegra: Add ZRELADDR default for ARCH_TEGRAErik Gilling
fixes the warning: .config:369:warning: symbol value '' invalid for ZRELADDR and the prompt for ZRELADDR on make Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2010-09-01oprofile, x86: fix init_sysfs() function stubRobert Richter
The use of the return value of init_sysfs() with commit 10f0412 oprofile, x86: fix init_sysfs error handling discovered the following build error for !CONFIG_PM: .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’: .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’ make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1 make[1]: *** [arch/x86/oprofile] Error 2 This patch fixes this. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-01alpha: Fix printk format errorsMichael Cree
When compiling alpha generic build get errors such as: arch/alpha/kernel/err_marvel.c: In function ‘marvel_print_err_cyc’: arch/alpha/kernel/err_marvel.c:119: error: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘u64’ Replaced a number of %ld format specifiers with %lld since u64 is unsigned long long. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-01Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-09-01Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-01Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King
2010-09-01ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARMMikael Pettersson
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on ARM. The only non-trivial issue here is the u64 argument to sys_fanotify_mark(), but it is the 3rd argument and thus passed in r2/r3 in both kernel and user space, so it causes no problems. Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine. Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01ARM: 6330/1: perf: reword comments relating to perf_event_do_pendingWill Deacon
This is purely a cosmetic change to the ARM perf backend because the current comments about the relationship between NMIs, interrupt context and perf_event_do_pending are misleading. This patch updates the comments so that they reflect what the code actually does (which is in line with other architectures). Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-31alpha: convert perf_event to use local_tMichael Cree
Updates the Alpha perf_event code to match the changes recently made to the core perf_event code in commit e78505958cf123048fb48cb56b79cebb8edd15fb. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31Fix call to replaced SuperIO functionsMorten H. Larsen
This patch fixes the failure to compile Alpha Generic because of previously overlooked calls to ns87312_enable_ide(). The function has been replaced by newer SuperIO code. Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Morten H. Larsen <m-larsen@post6.tele.dk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31alpha: remove homegrown L1_CACHE_ALIGN macroFUJITA Tomonori
Let's use the standard L1_CACHE_ALIGN macro instead. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31powerpc/85xx: Add P1021 PCI IDs and quirksAnton Vorontsov
This is needed for proper PCI-E support on P1021 SoCs. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leakJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> of_node_put(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmapJulia Lawall
The function of_iomap returns the result of calling ioremap, so iounmap should be called on the result in the error handling code, as done in the normal exit of the function. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1; identifier l; statement S; @@ *x = of_iomap(...); ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } when != E = x when any ( if (x == NULL) S | if (...) { ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } ( return <+...x...+>; | * return ...; ) } ) ... when != x = E1 when any iounmap(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31fsl_rio: fix compile errorsLi Yang
Fixes the following compile problem on E500 platforms: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception': arch/powerpc/sysdev/fsl_rio.c:248: error: 'MCSR_MASK' undeclared (first use in this function) Also fixes the compile problem on non-E500 platforms. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblockKumar Gala
arch/powerpc/platforms/85xx/p1022_ds.c:22:23: error: linux/lmb.h: No such file or directory arch/powerpc/platforms/85xx/p1022_ds.c: In function 'p1022_ds_setup_arch': arch/powerpc/platforms/85xx/p1022_ds.c:100: error: implicit declaration of function 'memblock_end_of_DRAM' arch/powerpc/platforms/85xx/p1022_ds.c: At top level: arch/powerpc/platforms/85xx/p1022_ds.c:147: error: 'udbg_progress' undeclared here (not in a function) make[2]: *** [arch/powerpc/platforms/85xx/p1022_ds.o] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Fix compilation of mpc85xx_mds.cAlexander Graf
Commit 99d8238f berobbed the for_each loop of its iterator! Let's be nice and give it back, so it compiles for us. CC: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31oprofile, x86: fix init_sysfs error handlingRobert Richter
On failure init_sysfs() might not properly free resources. The error code of the function is not checked. And, when reinitializing the exit function might be called twice. This patch fixes all this. Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31powerpc: Don't use kernel stack with translation offMichael Neuling
In f761622e59433130bc33ad086ce219feee9eb961 we changed early_setup_secondary so it's called using the proper kernel stack rather than the emergency one. Unfortunately, this stack pointer can't be used when translation is off on PHYP as this stack pointer might be outside the RMO. This results in the following on all non zero cpus: cpu 0x1: Vector: 300 (Data Access) at [c00000001639fd10] pc: 000000000001c50c lr: 000000000000821c sp: c00000001639ff90 msr: 8000000000001000 dar: c00000001639ffa0 dsisr: 42000000 current = 0xc000000016393540 paca = 0xc000000006e00200 pid = 0, comm = swapper The original patch was only tested on bare metal system, so it never caught this problem. This changes __secondary_start so that we calculate the new stack pointer but only start using it after we've called early_setup_secondary. With this patch, the above problem goes away. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31powerpc/perf_event: Reduce latency of calling perf_event_do_pendingPaul Mackerras
Commit 0fe1ac48 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") moved the call to perf_event_do_pending in timer_interrupt() down so that it was after the irq_enter() call. Unfortunately this moved it after the code that checks whether it is time for the next decrementer clock event. The result is that the call to perf_event_do_pending() won't happen until the next decrementer clock event is due. This was pointed out by Milton Miller. This fixes it by moving the check for whether it's time for the next decrementer clock event down to the point where we're about to call the event handler, after we've called perf_event_do_pending. This has the side effect that on old pre-Core99 Powermacs where we use the ppc_n_lost_interrupts mechanism to replay interrupts, a replayed interrupt will incur a little more latency since it will now do the code from the irq_enter down to the irq_exit, that it used to skip. However, these machines are now old and rare enough that this doesn't matter. To make it clear that ppc_n_lost_interrupts is only used on Powermacs, and to speed up the code slightly on non-Powermac ppc32 machines, the code that tests ppc_n_lost_interrupts is now conditional on CONFIG_PMAC as well as CONFIG_PPC32. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31powerpc/kexec: Adds correct calling convention for kexec purgatoryMatthew McClintock
Call kexec purgatory code correctly. We were getting lucky before. If you examine the powerpc 32bit kexec "purgatory" code you will see it expects the following: >From kexec-tools: purgatory/arch/ppc/v2wrap_32.S -> calling convention: -> r3 = physical number of this cpu (all cpus) -> r4 = address of this chunk (master only) As such, we need to set r3 to the current core, r4 happens to be unused by purgatory at the moment but we go ahead and set it here as well Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-30ARM: pxa: Make id const in pwm_probe()Uwe Kleine-König
This fixes the compiler warning: arch/arm/plat-pxa/pwm.c: In function 'pwm_probe': arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300Axel Lin
According to PXA3xx Processor Family Developer Manuall Vol1. section "Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52 is CI_VSYNC. This patch fixes the MFP defines and also corrects the order of MFD defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: remove __init from cpufreq_driver->init()Eric Miao
This is causing section mismatches when linking, as cpufreq_driver->init() is not supposed to be in init section. Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: bf52x/bf54x boards: drop unused nand page size Blackfin: punt duplicate SPORT MMR defines
2010-08-28Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Fix on Secondary CPU startup ARM: S5PV310: Bug fix on uclk1 and sclk_pwm ARM: S5PV310: Fix missed uart clocks ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll ARM: S5PV310: Fix on PLL setting for S5PV310 ARM: S5PV310: Add CMU block for S5PV310 Clock ARM: S5PV310: Fix on typo irqs.h of S5PV310 ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310 ARM: S5PV310: Fix on GPIO base addresses ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: VMALLOC_END should be unsigned long arm: tegra: fix compilation of board-harmony.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 09:52:01 +0000