summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-06-25ARM: at91/dt: define sam9261ek slow crystal frequencyAlexandre Belloni
Define at91sam9261ek's slow crystal frequencies. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9261: correctly define mainckAlexandre Belloni
mainck (CKGR_MCFR register) is actually using main_osc (CKGR_MOR register). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT valuesAlexandre Belloni
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT valuesAlexandre Belloni
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes and cleanups from Ben Herrenschmidt: "Here are a handful or two of powerpc fixes and simple/trivial cleanups. A bunch of them fix ftrace with the new ABI v2 in Little Endian, the rest is a scattering of fairly simple things" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't skip ePAPR spin-table CPUs powerpc/module: Fix TOC symbol CRC powerpc/powernv: Remove OPAL v1 takeover powerpc/kmemleak: Do not scan the DART table selftests/powerpc: Use the test harness for the TM DSCR test powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong type powerpc/kprobes: Fix jprobes on ABI v2 (LE) powerpc/ftrace: Use pr_fmt() to namespace error messages powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2) powerpc/ftrace: Fix inverted check of create_branch() powerpc/ftrace: Fix typo in mask of opcode powerpc: Add ppc_global_function_entry() powerpc/macintosh/smu.c: Fix closing brace followed by if powerpc: Remove __arch_swab* powerpc: Remove ancient DEBUG_SIG code powerpc/kerenl: Enable EEH for IO accessors
2014-06-25powerpc: Don't skip ePAPR spin-table CPUsScott Wood
Commit 59a53afe70fd530040bdc69581f03d880157f15a "powerpc: Don't setup CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs that aren't presently running shall have status of disabled, with enable-method being used to determine whether the CPU can be enabled. Fix by checking for spin-table, which is currently the only supported enable-method. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Emil Medve <Emilian.Medve@Freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-25powerpc/module: Fix TOC symbol CRCLaurent Dufour
The commit 71ec7c55ed91 introduced the magic symbol ".TOC." for ELFv2 ABI. This symbol is built manually and has no CRC value computed. A zero value is put in the CRC section to avoid modpost complaining about a missing CRC. Unfortunately, this breaks the kernel module loading when the kernel is relocated (kdump case for instance) because of the relocation applied to the kcrctab values. This patch compute a CRC value for the TOC symbol which will match the one compute by the kernel when it is relocated - aka '0 - relocate_start' done in maybe_relocated called by check_version (module.c). Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-25powerpc/powernv: Remove OPAL v1 takeoverMichael Ellerman
In commit 27f4488872d9 "Add OPAL takeover from PowerVM" we added support for "takeover" on OPAL v1 machines. This was a mode of operation where we would boot under pHyp, and query for the presence of OPAL. If detected we would then do a special sequence to take over the machine, and the kernel would end up running in hypervisor mode. OPAL v1 was never a supported product, and was never shipped outside IBM. As far as we know no one is still using it. Newer versions of OPAL do not use the takeover mechanism. Although the query for OPAL should be harmless on machines with newer OPAL, we have seen a machine where it causes a crash in Open Firmware. The code in early_init_devtree() to copy boot_command_line into cmd_line was added in commit 817c21ad9a1f "Get kernel command line accross OPAL takeover", and AFAIK is only used by takeover, so should also be removed. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A number of low impact fixes, the most noticable one is the thumb2 frame pointer fix. We also fix a regression caused during this merge window with ARM925 CPUs running with caches disabled, and fix a number of warnings" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: arm925: ensure assembly sets up writethrough mapping ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code) ARM: l2c: fix dependencies on PL310 errata symbols ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode ARM: 8068/1: scoop: Remove unused variable
2014-06-24x86/vdso: Error out in vdso2c if DT_RELA is presentAndy Lutomirski
vdso2c was checking for various types of relocations to detect when the vdso had undefined symbols or was otherwise dependent on relocation at load time. Undefined symbols in the vdso would fail if accessed at runtime, and certain implementation errors (e.g. branch profiling or incorrect symbol visibilities) could result in data access through the GOT that requires relocations. This could be as simple as: extern char foo; return foo; Without some kind of visibility control, the compiler would assume that foo could be interposed at load time and would generate a relocation. x86-64 and x32 (as opposed to i386) use explicit-addent (RELA) instead of implicit-addent (REL) relocations for data access, and vdso2c forgot to detect those. Whether these bad relocations would actually fail at runtime depends on what the linker sticks in the unrelocated references. Nonetheless, these relocations have no business existing in the vDSO and should be fixed rather than silently ignored. This error could trigger on some configurations due to branch profiling. The previous patch fixed that. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/74ef0c00b4d2a3b573e00a4113874e62f772e348.1403642755.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-06-24x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefileAndy Lutomirski
DISABLE_BRANCH_PROFILING turns off branch profiling (i.e. a redefinition of 'if'). Branch profiling depends on a bunch of kernel-internal symbols and generates extra output sections, none of which are useful or functional in the vDSO. It's currently turned off for vclock_gettime.c, but vgetcpu.c also triggers branch profiling, so just turn it off in the makefile. This fixes the build on some configurations: the vdso could contain undefined symbols, and the fake section table overflowed due to ftrace's added sections. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/bf1ec29e03b2bbc081f6dcaefa64db1c3a83fb21.1403642755.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-06-24ARM: integrator: fix OF-related regressionLinus Walleij
Commit 07e461cd7e73a84f0e3757932b93cc80976fd749 "of: Ensure unique names without sacrificing determinism" caused a boot failure regression on the Integrator machines. The problem is probably caused by fiddling too much with the device tree population in the OF init function, such as passing the SoC bus device as parent when populating the device tree. This patch fixes the problem by: - Avoiding to explicitly look up the tree root - Look up devices needed before device population from the match only, passing NULL as root - Passing NULL as root and parent when calling of_platform_populate() After this the Integrators boot again. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-24ARM: mvebu: Fix the improper use of the compatible string armada38x using a ↵Gregory CLEMENT
wildcard Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-24powerpc/kmemleak: Do not scan the DART tableCatalin Marinas
The DART table allocation is registered to kmemleak via the memblock_alloc_base() call. However, the DART table is later unmapped and dart_tablebase VA no longer accessible. This patch tells kmemleak not to scan this block and avoid an unhandled paging request. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong typeRickard Strandqvist
This variable is of the wrong type, everywhere it is used it should be an unsigned int rather than a int. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/kprobes: Fix jprobes on ABI v2 (LE)Michael Ellerman
In commit 721aeaa9 "Build little endian ppc64 kernel with ABIv2", we missed some updates required in the kprobes code to make jprobes work when the kernel is built with ABI v2. Firstly update arch_deref_entry_point() to do the right thing. Now that we have added ppc_global_function_entry() we can just always use that, it will do the right thing for 32 & 64 bit and ABI v1 & v2. Secondly we need to update the code that sets up the register state before calling the jprobe handler. On ABI v1 we setup r2 to hold the TOC, on ABI v2 we need to populate r12 with the function entry point address. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/ftrace: Use pr_fmt() to namespace error messagesMichael Ellerman
The printks() in our ftrace code have no prefix, so they appear on the console with very little context, eg: Branch out of range Use pr_fmt() & pr_err() to add a prefix. While we're at it, collapse a few split lines that don't need to be, and add a missing newline to one message. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2)Michael Ellerman
There is a bug in the handling of the function entry when we are nopping out a branch from a module in ftrace. We compare the result of module_trampoline_target() with the value of ppc_function_entry(), and expect them to be true. But they never will be. module_trampoline_target() will always return the global entry point of the function, whereas ppc_function_entry() will always return the local. Fix it by using the newly added ppc_global_function_entry(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/ftrace: Fix inverted check of create_branch()Michael Ellerman
In commit 24a1bdc35, "Fix ABIv2 issues with __ftrace_make_call", Anton changed the logic that creates and patches the branch, and added a thinko in the check of create_branch(). create_branch() returns the instruction that was generated, so if we get zero then it succeeded. The result is we can't ftrace modules: Branch out of range WARNING: at ../kernel/trace/ftrace.c:1638 ftrace failed to modify [<d000000004ba001c>] fuse_req_init_context+0x1c/0x90 [fuse] We should probably fix patch_instruction() to do that check and make the API saner, but that's a separate patch. For now just invert the test. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/ftrace: Fix typo in mask of opcodeMichael Ellerman
In commit 24a1bdc35, "Fix ABIv2 issues with __ftrace_make_call", Anton changed the logic that checks for the expected code sequence when patching a module. We missed the typo in the mask, 0xffff00000 should be 0xffff0000, which has the effect of making the test always true. That makes it impossible to ftrace against modules, eg: Unexpected call sequence: 48000008 e8410018 WARNING: at ../kernel/trace/ftrace.c:1638 ftrace failed to modify [<d000000007cf001c>] rng_dev_open+0x1c/0x70 [rng_core] Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc: Add ppc_global_function_entry()Michael Ellerman
ABIv2 has the concept of a global and local entry point to a function. In most cases we are interested in the local entry point, and so that is what ppc_function_entry() returns. However we have a case in the ftrace code where we want the global entry point, and there may be other places we need it too. Rather than special casing each, add an accessor. For ABIv1 and 32-bit there is only a single entry point, so we return that. That means it's safe for the caller to use this without also checking the ABI version. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc: Remove __arch_swab*Benjamin Herrenschmidt
The generic code uses gcc built-ins which work fine so there's no benefit in implementing our own anymore. We can't completely remove the ld/st_le* functions as some historical cruft still uses them, but that's next on the radar Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc: Remove ancient DEBUG_SIG codeMichael Ellerman
We have some compile-time disabled debug code in signal_xx.c. It's from some ancient time BG, almost certainly part of the original port, given the very similar code on other arches. The show_unhandled_signal logic, added in d0c3d534a438 (2.6.24) is cleaner and prints more useful information, so drop the debug code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-24powerpc/kerenl: Enable EEH for IO accessorsGavin Shan
In arch/powerpc/kernel/iomap.c, lots of IO reading accessors missed to check EEH error as Ben pointed. The patch fixes it. For the writing accessors, we change the called functions only for making them look similar to the reading counterparts. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-23ia64: arch/ia64/include/uapi/asm/fcntl.h needs personality.hAndrew Morton
fs/notify/fanotify/fanotify_user.c: In function 'SYSC_fanotify_init': fs/notify/fanotify/fanotify_user.c:726: error: implicit declaration of function 'personality' fs/notify/fanotify/fanotify_user.c:726: error: 'PER_LINUX32' undeclared (first use in this function) fs/notify/fanotify/fanotify_user.c:726: error: (Each undeclared identifier is reported only once fs/notify/fanotify/fanotify_user.c:726: error: for each function it appears in.) Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Will Woods <wwoods@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@vger.kernel.org> [3.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23nmi: provide the option to issue an NMI back trace to every cpu but currentAaron Tomlin
Sometimes it is preferred not to use the trigger_all_cpu_backtrace() routine when one wants to avoid capturing a back trace for current. For instance if one was previously captured recently. This patch provides a new routine namely trigger_allbutself_cpu_backtrace() which offers the flexibility to issue an NMI to every cpu but current and capture a back trace accordingly. Patch x86 and sparc to support new routine. [dzickus@redhat.com: add stub in #else clause] [dzickus@redhat.com: don't print message in single processor case, wrap with get/put_cpu based on Oleg's suggestion] [sfr@canb.auug.org.au: undo C99ism] Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23x86_32, signal: Fix vdso rt_sigreturnAndy Lutomirski
This commit: commit 6f121e548f83674ab4920a4e60afb58d4f61b829 Author: Andy Lutomirski <luto@amacapital.net> Date: Mon May 5 12:19:34 2014 -0700 x86, vdso: Reimplement vdso.so preparation in build-time C Contained this obvious typo: - restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn); + restorer = current->mm->context.vdso + + selected_vdso32->sym___kernel_sigreturn; Note the missing 'rt_' in the new code. Fix it. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/1eb40ad923acde2e18357ef2832867432e70ac42.1403361010.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-06-23x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)Andy Lutomirski
The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bba0 i386 syscall audit fast-path Cc: stable@vger.kernel.org Cc: Roland McGrath <roland@redhat.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-06-23ARM: dts: kirkwood: fix phy-connection-type for GuruplugSebastian Hesselbarth
Commit eeb845459a72e792a959278b858f9c417e9995bd ("ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id") added phy-connection-type properties to ethernet PHY nodes. Actually, the property has to be set for the ethernet port node instead. Fix it by moving the corresponding properties to the correct nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1403555115-13111-1-git-send-email-sebastian.hesselbarth@gmail.com Fixes: eeb845459a72: ('ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id') Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-23Merge tag 'imx-fixes-3.16' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 3.16" from Shawn Guo: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency * tag 'imx-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level ARM: dts: cubox-i: add support for PWM-driven front panel LED ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix ARM: dts: imx6: ventana: fix include typo ARM: dts: imx6sl: correct the fec ipg clock source ARM: imx6sl: add missing enet clock for imx6sl
2014-06-23ARC: fix build warning in devtreeVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-22Merge tag 'samsung-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge Samsung fixes for 3.16 from Kukjin Kim: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: EXYNOS: fix pm code to check for cortex A9 rather than the SoC clocksource: exynos_mct: Don't reset the counter during boot and resume ARM: dts: fix reg sizes of GIC for exynos4 ARM: EXYNOS: Use wfi macro in platform_do_lowpower Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This is larger than usual: the main reason are the ARM symbol lookup speedups that came in late and were hard to resist. There's also a kprobes fix and various tooling fixes, plus the minimal re-enablement of the mmap2 support interface" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/kprobes: Fix build errors and blacklist context_track_user perf tests: Add test for closing dso objects on EMFILE error perf tests: Add test for caching dso file descriptors perf tests: Allow reuse of test_file function perf tests: Spawn child for each test perf tools: Add dso__data_* interface descriptons perf tools: Allow to close dso fd in case of open failure perf tools: Add file size check and factor dso__data_read_offset perf tools: Cache dso data file descriptor perf tools: Add global count of opened dso objects perf tools: Add global list of opened dso objects perf tools: Add data_fd into dso object perf tools: Separate dso data related variables perf tools: Cache register accesses for unwind processing perf record: Fix to honor user freq/interval properly perf timechart: Reflow documentation perf probe: Improve error messages in --line option perf probe: Improve an error message of perf probe --vars mode perf probe: Show error code and description in verbose mode perf probe: Improve error message for unknown member of data structure ...
2014-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-21Merge tag 'for-linus' of git://github.com/gxt/linuxLinus Torvalds
Pull UniCore32 bug fixes from Guan Xuetao: "This includes bugfixes to make unicore32 successfully build under defconfig, and some changes for allmodconfig (though not finished)" * tag 'for-linus' of git://github.com/gxt/linux: unicore32: Remove ARCH_HAS_CPUFREQ config option UniCore32: Change git tree location information in MAINTAINERS arch: unicore32: ksyms: export '__cpuc_coherent_kern_range' to avoid compiling failure arch: unicore32: ksyms: export 'pm_power_off' to avoid compiling failure. arch: unicore32: ksyms: export additional find_first_*() to avoid compiling failure arch:unicore32:mm: add devmem_is_allowed() to support STRICT_DEVMEM unicore32: include: asm: add missing ')' for PAGE_* macros in pgtable.h arch/unicore32/kernel/setup.c: add generic 'screen_info' to avoid compiling failure drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause" arch: unicore32: kernel: ksyms: remove 'bswapsi2' and 'muldi3' to avoid compiling failure arch/unicore32/kernel/ksyms.c: remove 2 export symbols to avoid compiling failure drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue arch/unicore32/include/asm/io.h: add readl_relaxed() generic definition arch/unicore32/include/asm/ptrace.h: add generic definition for profile_pc() arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error arch/unicore32/kernel/clock.c: add readl() and writel() for 'PM_' macros arch/unicore32/kernel/module.c: use __vmalloc_node_range() instead of __vmalloc_area() arch/unicore32/kernel/ksyms.c: remove several undefined exported symbols
2014-06-21ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpmDoug Anderson
On exynos mcpm systems the firmware is hardcoded to jump to an address in SRAM (0x02073000) when secondary CPUs come up. By default the firmware puts a bunch of code at that location. That code expects the kernel to fill in a few slots with addresses that it uses to jump back to the kernel's entry point for secondary CPUs. Originally (on prerelease hardware) this firmware code contained a bunch of workarounds to deal with boot ROM bugs. However on all shipped hardware we simply use this code to redirect to a kernel function for bringing up the CPUs. Let's stop relying on the code provided by the bootloader and just plumb in our own (simple) code jump to the kernel. This has the nice benefit of fixing problems due to the fact that older bootloaders (like the one shipped on the Samsung Chromebook 2) might have put slightly different code into this location. Once suspend/resume is implemented for systems using exynos-mcpm we'll need to make sure we reinstall our fixed up code after resume. ...but that's not anything new since IRAM (and thus the address of the mcpm_entry_point) is lost across suspend/resume anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-21ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.Denis Carikli
The following commit: 89d7e5c mmc: sdhci-esdhc-imx: add runtime pm support has the effect of also disabling the hardware card detect in runtime pm. We switch to GPIO based detection to avoid this issue. This patch is based on: ARM: dts: imx51-babbage: Fix esdhc setup Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: imx51-babbage: Fix esdhc setupSascha Hauer
Since commit 89d7e5c13122 (mmc: sdhci-esdhc-imx: add runtime pm support), controller based card detection / write protection is not supported anymore by esdhc driver. Let's use GPIO for CD/WP on esdhc1 instead. While at it, fix cd gpio polarity for esdhc2. This is wrong and currently only works because the imx esdhc driver ignores the polarity. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: mx5: Move the display out of soc {} nodeMarek Vasut
Move the display {} node out of the soc {} node . This just aligns the DT with other boards, there is no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: mx5: Fix IPU port node placementMarek Vasut
The "port" node was misplaced in the original patch, therefore making the LCD dysfunctional on this board. Fix this by moving the "port" DT node into the "display {}" node. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platformsThomas Petazzoni
On Marvell Armada platforms, the PMSU (Power Management Service Unit) controls a number of power management related activities, needed for things like suspend/resume, CPU hotplug, cpuidle or even simply SMP. Since cpuidle support was added for Armada XP, the pmsu.c file in arch/arm/mach-mvebu/ calls the cpu_suspend() and cpu_resume() ARM functions, which are only available when CONFIG_ARM_CPU_SUSPEND=y. Therefore, configurations that have CONFIG_ARM_CPU_SUSPEND disabled due to PM_SLEEP being disabled no longer build properly, due to undefined references to cpu_suspend() and cpu_resume(). To fix this, this patch simply ensures CONFIG_ARM_CPU_SUSPEND is always enabled for Marvell EBU v7 platforms. Doing things in a more fine-grained way would require a lot of #ifdef-ery in pmsu.c to isolate the parts that use cpu_suspend()/cpu_resume(), and those parts would anyway have been needed as soon as either one of suspend/resume, CPU hotplug or cpuidle was enabled. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402488397-31381-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: Fix broken SoC ID detectionEzequiel Garcia
Currently the mvebu boards need to detect the SoC revision in order to apply some quirks needed to workaround issues found on I2C and thermal controllers present only in very early SoC. This detection requires PCI address translation to work, so we need to explicitly select OF_ADDRESS_PCI. This can be considered a partial revert of the following commit, that wrongly removed the option selection: commit 55400f3a1f89e39761f45c19f6e4235a329c400b Author: Rob Herring <robh@kernel.org> Date: Tue Apr 22 14:15:52 2014 -0500 ARM: mvebu: clean-up unneeded kconfig selects Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1402347165-19988-1-git-send-email-ezequiel.garcia@free-electrons.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20x86/vdso: Create .build-id links for unstripped vdso filesAndy Lutomirski
With this change, doing 'make vdso_install' and telling gdb: set debug-file-directory /lib/modules/KVER/vdso will enable vdso debugging with symbols. This is useful for testing, but kernel RPM builds will probably want to manually delete these symlinks or otherwise do something sensible when they strip the vdso/*.so files. If ld does not support --build-id, then the symlinks will not be created. Note that kernel packagers that use vdso_install may need to adjust their packaging scripts to accomdate this change. For example, Fedora's scripts create build-id symlinks themselves in a different location, so the spec should probably be updated to remove the symlinks created by make vdso_install. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a424b189ce3ced85fe1e82d032a20e765e0fe0d3.1403291930.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-06-20ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_COREFabio Estevam
Since commit 39b9004d1f (gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging) the ipuv3 core driver is no longer built bey default. Select CONFIG_IMX_IPUV3_CORE so that the core ipuv3 code can be built again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20ARM: arm925: ensure assembly sets up writethrough mappingRussell King
Commit ca8f0b0a545f ("ARM: ensure C page table setup code follows assembly code") did what it said on the tin, but some of the older CPU code omitted the default cache policy from their files. This results in the kernel running with the caches disabled. Fix this for ARM925. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-20ARM: multi_v7_defconfig: Add QCOM GSBI driverSrinivas Kandagatla
This patch adds QCOM GSBI config option to multi_v7_defconfig. Serial driver on QCOM APQ8064 depends on GSBI driver, so without this patch there is no serial console on IF6410 board using multi_v7_defconfig. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-20Merge tag 'sti-fixes-for-v3.16-rc1' of ↵Arnd Bergmann
git://git.stlinux.com/devel/kernel/linux-sti into fixes Merge "STi: DT fixes for v3.16" from Maxime Coquelin: Couple of DT fixes for STi platform issues discovered on V3.16-rc1. The fixes included are: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase. * tag 'sti-fixes-for-v3.16-rc1' of git://git.stlinux.com/devel/kernel/linux-sti: (2963 commits) ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-19Merge tag 'pm+acpi-3.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are fixes mostly (ia64 regression related to the ACPI enumeration of devices, cpufreq regressions, fix for I2C controllers included in Intel SoCs, mvebu cpuidle driver fix related to sysfs) plus additional kernel command line arguments from Kees to make it possible to build kernel images with hibernation and the kernel address space randomization included simultaneously, a new ACPI battery driver quirk for a system with a broken BIOS and a couple of ACPI core cleanups. Specifics: - Fix for an ia64 regression introduced during the 3.11 cycle by a commit that modified the hardware initialization ordering and made device discovery fail on some systems. - Fix for a build problem on systems where the cpufreq-cpu0 driver is built-in and the cpu-thermal driver is modular from Arnd Bergmann. - Fix for a recently introduced computational mistake in the intel_pstate driver that leads to excessive rounding errors from Doug Smythies. - Fix for a failure code path in cpufreq_update_policy() that fails to unlock the locks acquired previously from Aaron Plattner. - Fix for the cpuidle mvebu driver to use shorter state names which will prevent the sysfs interface from returning mangled strings. From Gregory Clement. - ACPI LPSS driver fix to make sure that the I2C controllers included in BayTrail SoCs are not held in the reset state while they are being probed from Mika Westerberg. - New kernel command line arguments making it possible to build kernel images with hibernation and kASLR included at the same time and to select which of them will be used via the command line (they are still functionally mutually exclusive, though). From Kees Cook. - ACPI battery driver quirk for Acer Aspire V5-573G that fails to send battery status change notifications timely from Alexander Mezin. - Two ACPI core cleanups from Christoph Jaeger and Fabian Frederick" * tag 'pm+acpi-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: mvebu: Fix the name of the states cpufreq: unlock when failing cpufreq_update_policy() intel_pstate: Correct rounding in busy calculation ACPI: use kstrto*() instead of simple_strto*() ACPI / processor replace __attribute__((packed)) by __packed ACPI / battery: add quirk for Acer Aspire V5-573G ACPI / battery: use callback for setting up quirks ACPI / LPSS: Take I2C host controllers out of reset x86, kaslr: boot-time selectable with hibernation PM / hibernate: introduce "nohibernate" boot parameter cpufreq: cpufreq-cpu0: fix CPU_THERMAL dependency ACPI / ia64 / sba_iommu: Restore the working initialization ordering
2014-06-19Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A first set of bug fixes that didn't make it for the merge window, and two Kconfig cleanups that still make sense at this point. Unfortunately, one of the two cleanups caused an unintended change in the original version, so we had to revert one part of it and do some more testing to ensure the rest is really fine. There was also a last-minute rebase of the patches to remove another bad commit" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: use menuconfig for sub-arch menus ARM: multi_v7_defconfig: re-enable SDHCI drivers ARM: EXYNOS: Fix compilation warning ARM: exynos: move sysram info to exynos.c ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board ARM: exynos: cleanup kconfig option display misc: vexpress: fix error handling vexpress_syscfg_regmap_init() ARM: Remove ARCH_HAS_CPUFREQ config option ARM: integrator: fix section mismatch problem ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size ARM: samsung: make SAMSUNG_DMADEV optional remoteproc: da8xx: don't select CMA on no-MMU bus/arm-cci: add dependency on OF && CPU_V7 ARM: keystone requires ARM_PATCH_PHYS_VIRT ARM: omap2: fix am43xx dependency on l2x0 cache
2014-06-20unicore32: Remove ARCH_HAS_CPUFREQ config optionStephen Boyd
This config exists entirely to hide the cpufreq menu from the kernel configuration unless a platform has selected it. Nothing is actually built if this config is 'Y' and it just leads to more patches that add a select under a platform Kconfig so that some other CPUfreq option can be chosen. Let's remove the option so that we can always enable CPUfreq drivers on unicore32 platforms. Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>