summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-05-21MIPS: AR7: Update defconfigFlorian Fainelli
Update Texas Instruments AR7 defconfig with: - tiny RCU - LEDs GPIO - disable SSB - enable zboot support - enable GPIO sysfs support Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Cleanup the commentsWu Zhangjin
Removes some out-of-date comments and empty lines. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Cleanup of the macrosWu Zhangjin
The _EXL, _KERNEL etc. bits are in the performance control register so use _PERFCTRL prefix instead of _PERFCNT. While at it make the macro more readable, use _ENABLE instead of _INT_EN suffix to describe the interrupt enable bit. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1203/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Remove unused variable from loongson2_cpu_setup()Wu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1202/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Remove useless parenthesesWu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Oprofile: Loongson: Unify macro for setting eventsWu Zhangjin
Unified macro for counter0 and counter1 to set the event in the control register. This will be needed by Perf. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: nofpu and nodsp only affect CPU0Kevin Cernekee
The "nofpu" and "nodsp" kernel command line options currently do not affect CPUs that are brought online later in the boot process or hotplugged at runtime. It is desirable to apply the nofpu/nodsp options to all CPUs in the system, so that surprising results are not seen when a process migrates from one CPU to another. [Ralf: Moved definitions of mips_fpu_disabled, fpu_disable, mips_dsp_disabled and dsp_disable from setup.c to cpu-probe.c to allow making mips_fpu_disabled and mips_dsp_disabled static.] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1169/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Clean up tables for bootmem allocationDavid VomLehn
Modifications to the boot memory allocation structures to make them easier to read and maintain. Note that this will not pass checkpatch because it wants a structure element initializer to be enclosed in a do {...} while(...), which is obvious nonsensical. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Coding style cleanups of access of FCSR rounding mode bitsShane McDonald
Replaces references to the magic number 0x3 with constants and macros indicating the real purpose of those bits. They are the rounding mode bits of the FCSR register. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: linux-mips@linux-mips.org To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1206/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Loongson 2F: Add gpio/gpioilb supportArnaud Patard
Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: add sysdev for DBDMA PM.Manuel Lauss
Add a sysdev for DBDMA PM. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: add sysdev for IRQ PM.Manuel Lauss
Use a sysdev to implement PM methods for the Au1000 interrupt controllers. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: Fix up residual devboard poweroff/reboot code.Manuel Lauss
Clean out stray unused board_reset() calls in pb1x boards, the PB1000 is different from the rest and gets private methods. (Cleanup after 32fd6901a6d8d19f94e4de6be4e4b552ab078620) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1085/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Loongson: update cpu-feature-overrides.hWu Zhangjin
Loongson doesn't support MIPSR2, therefore, MIPSR2 vectored interrupts (cpu_has_vint) and MIPSR2 external interrupt controller mode (cpu_has_veic) are 0. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Use set_cpus_allowed_ptrJulia Lawall
From: Julia Lawall <julia@diku.dk> Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: peterz@infradead.org To: mingo@elte.hu To: tglx@linutronix.de To: oleg@redhat.com To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1087/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits) omap4: Add support for i2c init omap: Fix i2c platform init code for omap4 OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y OMAP powerdomain, hwmod, omap_device: add some credits OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains OMAP: timers: Fix clock source names for OMAP4 OMAP4 clock: Support clk_set_parent OMAP4: PRCM: Add offset defines for all CM registers OMAP4: PRCM: Add offset defines for all PRM registers OMAP4: PRCM: Remove duplicate definition of base addresses OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention OMAP4: CM: Remove non-functional registers in ES1.0 OMAP: hwmod: Replace WARN by pr_warning for clockdomain check OMAP: hwmod: Rename hwmod name for the MPU OMAP: hwmod: Do not exit the iteration if one clock init failed OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value OMAP: hwmod: Fix wrong pointer iteration in oh->slaves ...
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (154 commits) mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value mtd: update gfp/slab.h includes jffs2: Stop triggering block erases from jffs2_write_super() jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger() jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held jffs2: Wake GC thread when there are blocks to be erased jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks() mtd: mtdchar: Do not corrupt backing device of device node inode mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages drivers/mtd: Use kmemdup mtd: cfi_cmdset_0002: Fix argument order in bootloc warning mtd: nand: add Toshiba TC58NVG0 device ID pcmciamtd: add another ID pcmciamtd: coding style cleanups pcmciamtd: fixing obvious errors mtd: chips: add SST39WF160x NOR-flashes ... Trivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20USB: omap3: add platform init code for OHCI driverAnand Gadiyar
Add platform init code for the OMAP3 OHCI driver. Also, configure padconf settings for OMAP3 depending on which port mode is used. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: Add extvbus in musb_board_dataAjay Kumar Gupta
EXTVBUS programming is required by OMAP3EVM REV >=E to supply 500mA power so adding a flag which can be used by musb driver to program EXTVBUS. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'omap4-i2c-init' into omap-for-linusTony Lindgren
2010-05-20omap4: Add support for i2c initTony Lindgren
Add support for i2c init for omap4. This patch is based on and earlier patch by Santosh Shilimkar <santosh.shilimkar@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap: Fix i2c platform init code for omap4Tony Lindgren
Add separate omap_i2c_add_bus functions for mach-omap1 and mach-omap2. Make the mach-omap2 init set the interrupt dynamically to support. This is needed to add support for omap4 in a way that works with multi-omap builds. This will eventually get fixed in a generic way with the omap hwmods. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20Merge branch 'for_2.6.35' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-05-20OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=yPaul Walmsley
The OMAP2 MPU virtual clock node code attempted to call clk_get_rate() while the clockfw_lock spinlock was held. Fix by reading the sys_ck rate directly. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP powerdomain, hwmod, omap_device: add some creditsPaul Walmsley
Add some missing credits for people who have contributed significant features or fixes. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Thara Gopinath <thara@ti.com>
2010-05-20OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomainsRajendra Nayak
Some powerdomains in OMAP4 support a direct transition from one sleep state to another deeper sleep state without having to wakeup the powerdomain. This patch adds an api in the powerdomain framework to set the LOWPOWERSTATECHANGE bit in PWRSTCTRL register. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP3 clock: add support for setting the divider for sys_clkout2 using ↵Laine Walker-Avina
clk_set_rate Add clock framework support for changing the rate of sys_clkout2. Signed-off-by: Laine Walker-Avina <lwalkera@ieee.org> [paul@pwsan.com: added commit message, added .round_rate pointer] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domainsRajendra Nayak
The pwrsts flag for ALWAYS ON domains like always_on_core_pwrdm and wkup_pwrdm is wrongly populated with the define for a powerdomain power state, instead of the allowable state bitfields. This causes a few api's to fail sensing invalid pwrst requested. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: timers: Fix clock source names for OMAP4Rajendra Nayak
The clock sources for timers on OMAP4 (system clock and 32k clock) have their names wronly populated. This patch fixes them so the omap_dm_timer_set_source does not fail anymore. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4 clock: Support clk_set_parentRajendra Nayak
Remove the hack put in place while clock framework was still not in place for OMAP4. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: PRCM: Add offset defines for all CM registersRajendra Nayak
The cm44xx.h files only had absolute register address defines for all CM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like cm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: PRCM: Add offset defines for all PRM registersRajendra Nayak
The prm44xx.h files only had absolute register address defines for all PRM registers. This patch adds additional register offset defines for all the registers, so they can be used with apis like prm_read_mod_* Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: PRCM: Remove duplicate definition of base addressesBenoit Cousson
CM1, CM2, PRM, SCRM and MPU_PRCM are already defined in omap44xx.h Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP4: PRM: Remove MPU internal code name and apply PRCM naming conventionBenoit Cousson
The MPU subsystem was named based on internal code name (CHIRON). This patch will remove all the occurences of the chiron name are replace it with PRCM_MPU in order to differentiate the MPU local PRCM to the global one. Remove PDA_ from PRCM_MPU registers names to stick to the global PRM naming convention. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP4: CM: Remove non-functional registers in ES1.0Benoit Cousson
The automatic HW restore from OFF mode is not functional at all in OMAP4430 ES1.0. Because of that, it will be extensively changed in the next Si revision, and the compatibilty will not be maintained with ES1.0. Remove the current XXX_RESTORE registers definition to avoid future conflicts with the next Si revision. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP: hwmod: Replace WARN by pr_warning for clockdomain checkBenoit Cousson
Most of the clock nodes belong to a clock domain, but it is perfectly valid to have clock without clock domain. Root clocks for example does not belong to any clock domain. Keep the warning but reduce the verbosity. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: hwmod: Rename hwmod name for the MPUBenoit Cousson
In the lastest OMAP4 hwmod data file, the _hwmod was removed in order to save some memory space and because it does not bring a lot. The same cleanup will be have to done for other hwmods in OMAP2 & 3 data files. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP: hwmod: Do not exit the iteration if one clock init failedBenoit Cousson
During the _init_clocks phase, the iteration is stopped but the status is still change from _HWMOD_STATE_REGISTERED to _HWMOD_STATE_CLKS_INITED. Since the _setup phase will be done nevertheless, it might be better to keep initializing the others clocks nodes and just keep the warning. It is much easier to debug when a important number of clocks name are wrong during the early debug phase of a new platform. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: hwmod: Replace WARN by pr_warning if clock lookup failedBenoit Cousson
The WARN is a little bit too verbose and is not providing usefull information in that case. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return valueBenoit Cousson
The previous clock API was returning a standard linux error code in case of failure. This is not the case anymore with the new omap_clk_get_by_name API. A NULL value means that the clock node does not exist. Replace all the IS_ERR check by a !clk check. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: hwmod: Fix wrong pointer iteration in oh->slavesBenoit Cousson
The iteration is currently done on the omap_hwmod_ocp_if pointer and not on the table pointer that reference them. It worked most of the time because the structure are contiguous in memory. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: hwmod: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLESTBenoit Cousson
Some initiator modules in OMAP2 & 3 does not have IDLEST bit, in that case we cannot detect the module readiness by polling that bit and must exist the function immediately assuming that the module is ready. The previous flag was affected to the OCP interface. While it is technically true that the idlest is related to the L4 slave interface of the module, the PRCM status belong to the module. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready functionBenoit Cousson
The return of the omap4_cm_wait_module_ready function is checked in order to avoid accessing the sysconfig register if the module is not in the correct state. In that case the _setup will exit without trying to reset using sysconfig. For the moment a warning is printed. A proper management of fclk and module reset will have to be done in order to init correctly the problematic IPs listed below. <4>omap_hwmod: ivahd: cannot be enabled (3) <4>omap_hwmod: iss: cannot be enabled (3) <4>omap_hwmod: tesla: cannot be enabled (3) <4>omap_hwmod: sdma: cannot be enabled (3) <4>omap_hwmod: sl2: cannot be enabled (3) <4>omap_hwmod: sad2d: cannot be enabled (3) <4>omap_hwmod: ducati: cannot be enabled (3) Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP: CM: Move MAX_MODULE_READY_TIME to cm.hBenoit Cousson
The maximum timeout to wait for the PRCM to request that a module exit idle or reach functionnal state is common to OMAP2/3/4 SoCs, so, move it to the chip family-common cm.h include file. Reduce the timeout from 20 ms to 2 ms. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP4: hwmod: Replace module & device offsets by absolute clkctrl addressBenoit Cousson
Accessing the clkctrl register using offset of module & device is hard to do in OMAP4 due to the way the CM1, CM2, PRM and PRCM_MPU are located in the address space. There is no common base address anymore for all the CM registers. The easiest way to handle that on OMAP4 is to provide the absolute address of the XXX_CLKCTRL register per hwmod. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-05-20OMAP clock: resolve old checkpatch and CodingStyle issues with plat-omap/clock.cPaul Walmsley
Clean up comment style, remove unnecessary includes, and resolve some checkpatch warnings in plat-omap/clock.c. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-20OMAP3 clock: remove unnecessary duplicate of dpll4_m2_ck, added for 36xxPaul Walmsley
Commit 678bc9a2eabb7f444ef8ad1cfc5ef394e2bd8bf2 split dpll4_m2_ck, creating a 34xx and a 36xx variant, to handle the additional 16 divider steps provided on the 36xx. This in turn required dynamic rewriting of the clock tree during initialization, which is undesirable. All this seems to be unnecessary, though, since the additional 16 divider steps can simply be marked with RATE_IN_36XX. This patch does so and re-merges the affected structures. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vishwanath Sripathy <vishwanath.bs@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:29:49 +0000