summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-06-04cma: add placement specifier for "cma=" kernel parameterAkinobu Mita
Currently, "cma=" kernel parameter is used to specify the size of CMA, but we can't specify where it is located. We want to locate CMA below 4GB for devices only supporting 32-bit addressing on 64-bit systems without iommu. This enables to specify the placement of CMA by extending "cma=" kernel parameter. Examples: 1. locate 64MB CMA below 4GB by "cma=64M@0-4G" 2. locate 64MB CMA exact at 512MB by "cma=64M@512M" Note that the DMA contiguous memory allocator on x86 assumes that page_address() works for the pages to allocate. So this change requires to limit end address of contiguous memory area upto max_pfn_mapped to prevent from locating it on highmem area by the argument of dma_contiguous_reserve(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: enable DMA CMA with swiotlbAkinobu Mita
The DMA Contiguous Memory Allocator support on x86 is disabled when swiotlb config option is enabled. So DMA CMA is always disabled on x86_64 because swiotlb is always enabled. This attempts to support for DMA CMA with enabling swiotlb config option. The contiguous memory allocator on x86 is integrated in the function dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for dma_alloc_coherent(). x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops tries to allocate with dma_generic_alloc_coherent() firstly and then swiotlb_alloc_coherent() is called as a fallback. The main part of supporting DMA CMA with swiotlb is that changing x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for dma_free_coherent() so that it can distinguish memory allocated by dma_generic_alloc_coherent() from one allocated by swiotlb_alloc_coherent() and release it with dma_generic_free_coherent() which can handle contiguous memory. This change requires making is_swiotlb_buffer() global function. This also needs to change .free callback in the dma_map_ops for amd_gart and sta2x11, because these dma_ops are also using dma_generic_alloc_coherent(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: make dma_alloc_coherent() return zeroed memory if CMA is enabledAkinobu Mita
This patchset enhances the DMA Contiguous Memory Allocator on x86. Currently the DMA CMA is only supported with pci-nommu dma_map_ops and furthermore it can't be enabled on x86_64. But I would like to allocate big contiguous memory with dma_alloc_coherent() and tell it to the device that requires it, regardless of which dma mapping implementation is actually used in the system. So this makes it work with swiotlb and intel-iommu dma_map_ops, too. And this also extends "cma=" kernel parameter to specify placement constraint by the physical address range of memory allocations. For example, CMA allocates memory below 4GB by "cma=64M@0-4G", it is required for the devices only supporting 32-bit addressing on 64-bit systems without iommu. This patch (of 5): Calling dma_alloc_coherent() with __GFP_ZERO must return zeroed memory. But when the contiguous memory allocator (CMA) is enabled on x86 and the memory region is allocated by dma_alloc_from_contiguous(), it doesn't return zeroed memory. Because dma_generic_alloc_coherent() forgot to fill the memory region with zero if it was allocated by dma_alloc_from_contiguous() Most implementations of dma_alloc_coherent() return zeroed memory regardless of whether __GFP_ZERO is specified. So this fixes it by unconditionally zeroing the allocated memory region. Alternatively, we could fix dma_alloc_from_contiguous() to return zeroed out memory and remove memset() from all caller of it. But we can't simply remove the memset on arm because __dma_clear_buffer() is used there for ensuring cache flushing and it is used in many places. Of course we can do redundant memset in dma_alloc_from_contiguous(), but I think this patch is less impact for fixing this problem. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86, mm: probe memory block size for generic x86 64bitYinghai Lu
On system with 2TiB ram, current x86_64 have 128M as section size, and one memory_block only include one section. So will have 16400 entries under /sys/devices/system/memory/. Current code try to use block id to find block pointer in /sys for any section, and reuse that block pointer. that finding will take some time even after commit 7c243c7168dc ("mm: speedup in __early_pfn_to_nid") that will skip the search in that case during booting up. So solution could be increase block size just like SGI UV system did. (harded code to 2g). This patch is trying to probe the block size to make it match mmio remap size. for example, Intel Nehalem later system will have memory range [0, TOML), [4g, TOMH]. If the memory hole is 2g and total is 128g, TOM will be 2g, and TOM2 will be 130g. We could use 2g as block size instead of default 128M. That will reduce number of entries in /sys/devices/system/memory/ On system 6TiB system will reduce boot time by 35 seconds. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levelsMel Gorman
_PAGE_NUMA is currently an alias of _PROT_PROTNONE to trap NUMA hinting faults on x86. Care is taken such that _PAGE_NUMA is used only in situations where the VMA flags distinguish between NUMA hinting faults and prot_none faults. This decision was x86-specific and conceptually it is difficult requiring special casing to distinguish between PROTNONE and NUMA ptes based on context. Fundamentally, we only need the _PAGE_NUMA bit to tell the difference between an entry that is really unmapped and a page that is protected for NUMA hinting faults as if the PTE is not present then a fault will be trapped. Swap PTEs on x86-64 use the bits after _PAGE_GLOBAL for the offset. This patch shrinks the maximum possible swap size and uses the bit to uniquely distinguish between NUMA hinting ptes and swap ptes. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: require x86-64 for automatic NUMA balancingMel Gorman
32-bit support for NUMA is an oddity on its own but with automatic NUMA balancing on top there is a reasonable risk that the CPUPID information cannot be stored in the page flags. This patch removes support for automatic NUMA support on 32-bit x86. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04arch/unicore32/mm/ioremap.c: return NULL on invalid pfnAndrew Morton
__uc32_ioremap_pfn_caller() should return NULL when the pfn is found to be invalid. From a recommendation by Guan Xuetao. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04arch/unicore32/mm/ioremap.c: convert printk/warn_on to warn()Fabian Frederick
Coalesce formats. [akpm@linux-foundation.org: undo crazy long line] Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04sh: Replace __get_cpu_var usesChristoph Lameter
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Signed-off-by: Christoph Lameter <cl@linux.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only] Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04hugetlb: restrict hugepage_migration_support() to x86_64Naoya Horiguchi
Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...
2014-06-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull timer core updates from Thomas Gleixner: "This time you get nothing really exciting: - A huge update to the sh* clocksource drivers - Support for two more ARM SoCs - Removal of the deprecated setup_sched_clock() API - The usual pile of fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) clocksource: Add Freescale FlexTimer Module (FTM) timer support ARM: dts: vf610: Add Freescale FlexTimer Module timer node. clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation clocksource: sh_tmu: Remove unnecessary OOM messages clocksource: sh_mtu2: Remove unnecessary OOM messages clocksource: sh_cmt: Remove unnecessary OOM messages clocksource: em_sti: Remove unnecessary OOM messages clocksource: dw_apb_timer_of: Do not trace read_sched_clock clocksource: Fix clocksource_mmio_readX_down clocksource: Fix type confusion for clocksource_mmio_readX_Y clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case clocksource: qcom: Implement read_current_timer for udelay ntp: Make is_error_status() use its argument ntp: Convert simple_strtol to kstrtol timer_stats/doc: Fix /proc/timer_stats documentation sched_clock: Remove deprecated setup_sched_clock() API ARM: sun6i: a31: Add support for the High Speed Timers clocksource: sun5i: Add support for reset controller clocksource: efm32: use $vendor,$device scheme for compatible string KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform ...
2014-06-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into next Pull media updates from Mauro Carvalho Chehab: "This contains: - a new frontend/tuner driver set for si2168 and sa2157 - Videobuf 2 core now supports DVB too - A new gspca sub-driver (dtcs033) - saa7134 is now converted to use videobuf2 - add support for 4K timings - several other driver fixes and improvements PS. This pull request is shorter than usual, partly because I have some other patches on topic branches that I'll be sending you later this week" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (286 commits) [media] au0828-dvb: restore its permission to 644 [media] xc5000: delay tuner sleep to 5 seconds [media] xc5000: Don't use whitespace before tabs [media] xc5000: fix CamelCase [media] xc5000: Don't wrap msleep() [media] xc5000: get rid of positive error codes [media] au0828: reset streaming when a new frequency is set [media] au0828: Improve debug messages for urb_completion [media] au0828: Cancel stream-restart operation if frontend is disconnected [media] dib0700: fix RC support on Hauppauge Nova-TD [media] USB: as102_usb_drv.c: Remove useless return variables [media] v4l: Fix documentation of V4L2_PIX_FMT_H264_MVC and VP8 pixel formats [media] m5mols: Replace missing header [media] staging: lirc: Fix sparse warnings [media] fix mceusb endpoint type identification/handling [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner [media] DocBook media: fix typo [media] adv7604: Add missing include to linux/types.h [media] v4l: Validate fields in the core code for subdev EDID ioctls [media] v4l: Add support for DV timings ioctls on subdev nodes ...
2014-06-04Merge tag 'devicetree-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next Pull DeviceTree updates from Rob Herring: - Another round of clean-up of FDT related code in architecture code. This removes knowledge of internal FDT details from most architectures except powerpc. - Conversion of kernel's custom FDT parsing code to use libfdt. - DT based initialization for generic serial earlycon. The introduction of generic serial earlycon support went in through the tty tree. - Improve the platform device naming for DT probed devices to ensure unique naming and use parent names instead of a global index. - Fix a race condition in of_update_property. - Unify the various linker section OF match tables and fix several function prototype errors. - Update platform_get_irq_byname to work in deferred probe cases. - 2 binding doc updates * tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits) of: handle NULL node in next_child iterators of/irq: provide more wrappers for !CONFIG_OF devicetree: bindings: Document micrel vendor prefix dt: bindings: dwc2: fix required value for the phy-names property of_pci_irq: kill useless variable in of_irq_parse_pci() of/irq: do irq resolution in platform_get_irq_byname() of: Add a testcase for of_find_node_by_path() of: Make of_find_node_by_path() handle /aliases of: Create unlocked version of for_each_child_of_node() lib: add glibc style strchrnul() variant of: Handle memory@0 node on PPC32 only pci/of: Remove dead code of: fix race between search and remove in of_update_property() of: Use NULL for pointers of: Stop naming platform_device using dcr address of: Ensure unique names without sacrificing determinism tty/serial: pl011: add DT based earlycon support of/fdt: add FDT serial scanning for earlycon of/fdt: add FDT address translation support serial: earlycon: add DT support ...
2014-06-04Merge tag 'sound-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next Pull sound updates from Takashi Iwai: "At this time, majority of changes come from ASoC world while we got a few new drivers in other places for FireWire and USB. There have been lots of ASoC core cleanups / refactoring, but very little visible to external users. ASoC: - Support for specifying aux CODECs in DT - Removal of the deprecated mux and enum macros - More moves towards full componentisation - Removal of some unused I/O code - Lots of cleanups, fixes and enhancements to the davinci, Freescale, Haswell and Realtek drivers - Several drivers exposed directly in Kconfig for use with simple-card - GPIO descriptor support for jacks - More updates and fixes to the Freescale SSI, Intel and rsnd drivers - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781, and Realtek RT5677 HD-audio: - Clean up Dell headset quirks - Noise fixes for Dell and Sony laptops - Thinkpad T440 dock fix - Realtek codec updates (ALC293,ALC233,ALC3235) - Tegra HD-audio HDMI support FireWire-audio: - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming isochronous stream and duplex streams with timestamp synchronization - BeBoB-based devices support - Fireworks-based device support USB-audio: - Behringer BCD2000 USB device support Misc: - Clean up of a few old drivers, atmel, fm801, etc" * tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits) ASoC: Fix wrong argument for card remove callbacks ASoC: free jack GPIOs before the sound card is freed ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation ASoC: cache: Fix error code when not using ASoC level cache ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data ASoC: add RT5677 CODEC driver ASoC: intel: The Baytrail/MAX98090 driver depends on I2C ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651 ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error. ASoC: Add helper functions to cast from DAPM context to CODEC/platform ALSA: bebob: sizeof() vs ARRAY_SIZE() typo ASoC: wm9713: correct mono out PGA sources ALSA: synth: emux: soundfont.c: Cleaning up memory leak ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320 ASoC: fsl-ssi: Use regmap ASoC: fsl-ssi: reorder and document fsl_ssi_private ...
2014-06-04Merge tag 'fbdev-omap-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next Pull omap fbdev changes from Tomi Valkeinen: - DT support for the panel drivers that were still missing it - TI AM43xx support - TI OMAP5 support * tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits) OMAPDSS: move 'compatible' converter to omapdss driver OMAPDSS: HDMI: fix devm_ioremap_resource error checks OMAPDSS: HDMI: remove unused defines OMAPDSS: HDMI: cleanup WP ioremaps OMAPDSS: panel NEC-NL8048HL11 DT support Doc/DT: Add DT binding documentation for TPO td043mtea1 panel OMAPDSS: Panel TPO-TD043MTEA1 DT support Doc/DT: Add DT binding documentation for SHARP LS037V7DW01 OMAPDSS: panel sharp-ls037v7dw01 DT support OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod Doc/DT: Add binding doc for lgphilips,lb035q02.txt OMAPDSS: panel-lgphilips-lb035q02: Add DT support OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO OMAPDSS: panel-dpi: enable-gpio OMAPDSS: Fix writes to DISPC_POL_FREQ Doc/DT: Add OMAP5 DSS DT bindings OMAPDSS: HDMI: cleanup ioremaps OMAPDSS: HDMI: Add OMAP5 HDMI support OMAPDSS: HDMI: PLL changes for OMAP5 ...
2014-06-04Merge tag 'pm+acpi-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next Pull ACPI and power management updates from Rafael Wysocki: "ACPICA is the leader this time (63 commits), followed by cpufreq (28 commits), devfreq (15 commits), system suspend/hibernation (12 commits), ACPI video and ACPI device enumeration (10 commits each). We have no major new features this time, but there are a few significant changes of how things work. The most visible one will probably be that we are now going to create platform devices rather than PNP devices by default for ACPI device objects with _HID. That was long overdue and will be really necessary to be able to use the same drivers for the same hardware blocks on ACPI and DT-based systems going forward. We're not expecting fallout from this one (as usual), but it's something to watch nevertheless. The second change having a chance to be visible is that ACPI video will now default to using native backlight rather than the ACPI backlight interface which should generally help systems with broken Win8 BIOSes. We're hoping that all problems with the native backlight handling that we had previously have been addressed and we are in a good enough shape to flip the default, but this change should be easy enough to revert if need be. In addition to that, the system suspend core has a new mechanism to allow runtime-suspended devices to stay suspended throughout system suspend/resume transitions if some extra conditions are met (generally, they are related to coordination within device hierarchy). However, enabling this feature requires cooperation from the bus type layer and for now it has only been implemented for the ACPI PM domain (used by ACPI-enumerated platform devices mostly today). Also, the acpidump utility that was previously shipped as a separate tool will now be provided by the upstream ACPICA along with the rest of ACPICA code, which will allow it to be more up to date and better supported, and we have one new cpuidle driver (ARM clps711x). The rest is improvements related to certain specific use cases, cleanups and fixes all over the place. Specifics: - ACPICA update to upstream version 20140424. That includes a number of fixes and improvements related to things like GPE handling, table loading, headers, memory mapping and unmapping, DSDT/SSDT overriding, and the Unload() operator. The acpidump utility from upstream ACPICA is included too. From Bob Moore, Lv Zheng, David Box, David Binderman, and Colin Ian King. - Fixes and cleanups related to ACPI video and backlight interfaces from Hans de Goede. That includes blacklist entries for some new machines and using native backlight by default. - ACPI device enumeration changes to create platform devices rather than PNP devices for ACPI device objects with _HID by default. PNP devices will still be created for the ACPI device object with device IDs corresponding to real PNP devices, so that change should not break things left and right, and we're expecting to see more and more ACPI-enumerated platform devices in the future. From Zhang Rui and Rafael J Wysocki. - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it to handle system suspend/resume on Asus T100 correctly. From Heikki Krogerus and Rafael J Wysocki. - PM core update introducing a mechanism to allow runtime-suspended devices to stay suspended over system suspend/resume transitions if certain additional conditions related to coordination within device hierarchy are met. Related PM documentation update and ACPI PM domain support for the new feature. From Rafael J Wysocki. - Fixes and improvements related to the "freeze" sleep state. They affect several places including cpuidle, PM core, ACPI core, and the ACPI battery driver. From Rafael J Wysocki and Zhang Rui. - Miscellaneous fixes and updates of the ACPI core from Aaron Lu, Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki. - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony Camuso, and Toshi Kani. - System suspend/resume optimization in the ACPI battery driver from Lan Tianyu. - OPP (Operating Performance Points) subsystem updates from Chander Kashyap, Mark Brown, and Nishanth Menon. - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat, Stratos Karafotis, and Viresh Kumar. - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q, s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris, Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and Viresh Kumar. - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug Smythies, and Stratos Karafotis. - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown. - Fix for the cpuidle menu governor from Chander Kashyap. - New ARM clps711x cpuidle driver from Alexander Shiyan. - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter, Fabian Frederick, Pali Rohár, and Sebastian Capella. - Intel RAPL (Running Average Power Limit) driver updates from Jacob Pan. - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick. - devfreq core updates from Chanwoo Choi and Paul Bolle. - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and Bartlomiej Zolnierkiewicz. - turbostat tool fix from Jean Delvare. - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra and Thomas Renninger. - New ACPI ec_access.c tool for poking at the EC in a safe way from Thomas Renninger" * tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits) ACPICA: Namespace: Remove _PRP method support. intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking PM / hibernate: fixed typo in comment ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPI / scan: use platform bus type by default for _HID enumeration ACPI / scan: always register ACPI LPSS scan handler ACPI / scan: always register memory hotplug scan handler ACPI / scan: always register container scan handler ACPI / scan: Change the meaning of missing .attach() in scan handlers ACPI / scan: introduce platform_id device PNP type flag ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI / scan: .match() callback for ACPI scan handlers ACPI / battery: wakeup the system only when necessary power_supply: allow power supply devices registered w/o wakeup source ...
2014-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial into next Pull trivial tree changes from Jiri Kosina: "Usual pile of patches from trivial tree that make the world go round" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) staging: go7007: remove reference to CONFIG_KMOD aic7xxx: Remove obsolete preprocessor define of: dma: doc fixes doc: fix incorrect formula to calculate CommitLimit value doc: Note need of bc in the kernel build from 3.10 onwards mm: Fix printk typo in dmapool.c modpost: Fix comment typo "Modules.symvers" Kconfig.debug: Grammar s/addition/additional/ wimax: Spelling s/than/that/, wording s/destinatary/recipient/ aic7xxx: Spelling s/termnation/termination/ arm64: mm: Remove superfluous "the" in comment of: Spelling s/anonymouns/anonymous/ dma: imx-sdma: Spelling s/determnine/determine/ ath10k: Improve grammar in comments ath6kl: Spelling s/determnine/determine/ of: Improve grammar for of_alias_get_id() documentation drm/exynos: Spelling s/contro/control/ radio-bcm2048.c: fix wrong overflow check doc: printk-formats: do not mention casts for u64/s64 doc: spelling error changes ...
2014-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into nextLinus Torvalds
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
2014-06-04x86: irq: Get correct available vectors for cpu disableYinghai Lu
check_irq_vectors_for_cpu_disable() can overestimate the number of available interrupt vectors, so the check for cpu down succeeds, but the actual cpu removal fails. It iterates from FIRST_EXTERNAL_VECTOR to NR_VECTORS, which is wrong because the systems vectors are not taken into account. Limit the search to first_system_vector instead of NR_VECTORS. The second indicator for vector availability the used_vectors bitmap is not taken into account at all. So system vectors, e.g. IA32_SYSCALL_VECTOR (0x80) and IRQ_MOVE_CLEANUP_VECTOR (0x20), are accounted as available. Add a check for the used_vectors bitmap and do not account vectors which are marked there. [ tglx: Simplified code. Rewrote changelog and code comments. ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Elliott, Robert (Server Storage)" <Elliott@hp.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1400160305-17774-2-git-send-email-prarit@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-04microblaze: remove check for CONFIG_XILINX_CONSOLEPaul Bolle
There's been a check for CONFIG_XILINX_CONSOLE since v2.6.30. But the Kconfig symbol XILINX_CONSOLE was never added. Remove this check. And, since DUMMY_CONSOLE depends on VT, we can now drop the check for CONFIG_VT. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Use generic device.hMichal Simek
pdev_archdata dma_mask is completely unused. Use generic device.h Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Do not setup empty unmap_sg functionMichal Simek
No reason to setup empty function. Core is checking if this function should be called or not. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Remove device_to_maskMichal Simek
Completely unused function - remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Clean device dma_ops structureMichal Simek
No code is setting up dma_operation for device. Use dma_direct_ops for all cases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Cleanup PCI_DRAM_OFFSET handlingMichal Simek
PCI_DRAM_OFFSET/pci_dram_offset is 0 all the time and there is no difference for PCI and !PCI cases. Also remove the whole code which setup archdata.dma_data which is completely unused. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Do not setup pci_dma_opsMichal Simek
pci_dma_ops are dma_direct_ops which are setup by default that's why not setup it again. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Return default dma operationsMichal Simek
Return Microblaze default dma operations and remove bus notifier which setups the same dma operations by default when device is added to the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-04microblaze: Enable SERIAL_OF_PLATFORMMichal Simek
SERIAL_OF_PLATFORM is required for getting 8250 to work. Reported-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-06-03Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86/UV changes from Ingo Molnar: "Continued updates for SGI UV 3 hardware support" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/UV: Fix conditional in gru_exit() x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3
2014-06-03Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 RAS changes from Ingo Molnar: "Improve mcheck device initialization and bootstrap robustness" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mce: Panic when a core has reached a timeout x86/mce: Improve mcheck_init_device() error handling
2014-06-03Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 IOSF platform updates from Ingo Molnar: "IOSF (Intel OnChip System Fabric) updates: - generalize the IOSF interface to allow mixed mode drivers: non-IOSF drivers to utilize of IOSF features on IOSF platforms. - add 'Quark X1000' IOSF/MBI support - clean up BayTrail and Quark PCI ID enumeration" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, iosf: Add PCI ID macros for better readability x86, iosf: Add Quark X1000 PCI ID x86, iosf: Added Quark MBI identifiers x86, iosf: Make IOSF driver modular and usable by more drivers
2014-06-03Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 mm update from Ingo Molnar: - speed up 256 GB PCI BAR ioremap()s - speed up PTE swapout page reclaim case * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, ioremap: Speed up check for RAM pages x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB
2014-06-03Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 microcode changes from Ingo Molnar: "A microcode-debugging boot flag plus related refactoring" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode: Add a disable chicken bit x86, boot: Carve out early cmdline parsing function
2014-06-03Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 irq cleanup from Ingo Molnar: "A single, trivial cleanup" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Clean up VECTOR_UNDEFINED and VECTOR_RETRIGGERED definition
2014-06-03Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 build cleanups from Ingo Molnar: "Two small build related cleanups" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Supress realmode.bin is up to date message compiler-intel.h: Remove duplicate definition
2014-06-03Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 boot changes from Ingo Molnar: "Two small cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Remove misc.h inclusion from compressed/string.c x86, boot: Do not include boot.h in string.c
2014-06-03Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull x86 asm cleanups from Ingo Molnar: "A handful of entry_64.S cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64, entry: Merge paranoidzeroentry_ist into idtentry x86_64, entry: Merge most 64-bit asm entry macros x86_64, entry: Add missing 'DEFAULT_FRAME 0' entry annotations
2014-06-03Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (28 commits) cpufreq: handle calls to ->target_index() in separate routine cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE cpufreq: intel_pstate: Remove unused member name of cpudata cpufreq: Break out early when frequency equals target_freq cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed() cpufreq: imx6q: Remove unused include cpufreq: imx6q: Drop devm_clk/regulator_get usage cpufreq: powernow-k8: Suppress checkpatch warnings cpufreq: powernv: make local function static cpufreq: Enable big.LITTLE cpufreq driver on arm64 cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro intel_pstate: Add CPU IDs for Broadwell processors cpufreq: Fix build error on some platforms that use cpufreq_for_each_* PM / OPP: Move cpufreq specific OPP functions out of generic OPP library PM / OPP: Remove cpufreq wrapper dependency on internal data organization cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end intel_pstate: Remove sample parameter in intel_pstate_calc_busy cpufreq: Kconfig: Fix spelling errors cpufreq: Make linux-pm@vger.kernel.org official mailing list cpufreq: exynos: Use dev_err/info function instead of pr_err/info ...
2014-06-03Merge branch 'acpica'Rafael J. Wysocki
* acpica: (63 commits) ACPICA: Namespace: Remove _PRP method support. ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPICA: acpidump: Fix repetitive table dump in -n mode. ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem. ACPICA: Clean up redudant definitions already defined elsewhere ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h> ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h> ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages. ACPICA: Update version to 20140424. ACPICA: Comment/format update, no functional change. ACPICA: Events: Update GPE handling and initialization code. ACPICA: Remove extraneous error message for large number of GPEs. ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries. ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT. ACPICA: acpidump: Add support to force using RSDT. ACPICA: Back port of improvements on exception code. ACPICA: Back port of _PRP update. ACPICA: acpidump: Fix truncated RSDP signature validation. ACPICA: Linux header: Add support for stubbed externals. ...
2014-06-03Merge branches 'acpi-processor' and 'acpi-pad'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify() ACPI / processor: Check if LAPIC is present during initialization ACPI / ia64: introduce variable acpi_lapic into ia64 * acpi-pad: ACPI / PAD: Use time_before() for time comparison ACPI / PAD: call schedule() when need_resched() is true
2014-06-03Merge branches 'acpi-scan', 'acpi-hotplug' and 'acpi-pci'Rafael J. Wysocki
* acpi-scan: ACPI / scan: do not scan fixed hardware on HW-reduced platform * acpi-hotplug: ACPI: add dynamic_debug support ACPI / notify: Clean up handling of hotplug events * acpi-pci: ACPI / PCI: Stub out pci_acpi_crs_quirks() and make it x86 specific
2014-06-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull scheduler updates from Ingo Molnar: "The main scheduling related changes in this cycle were: - various sched/numa updates, for better performance - tree wide cleanup of open coded nice levels - nohz fix related to rq->nr_running use - cpuidle changes and continued consolidation to improve the kernel/sched/idle.c high level idle scheduling logic. As part of this effort I pulled cpuidle driver changes from Rafael as well. - standardized idle polling amongst architectures - continued work on preparing better power/energy aware scheduling - sched/rt updates - misc fixlets and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sched/numa: Decay ->wakee_flips instead of zeroing sched/numa: Update migrate_improves/degrades_locality() sched/numa: Allow task switch if load imbalance improves sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice() sched: Initialize rq->age_stamp on processor start sched, nohz: Change rq->nr_running to always use wrappers sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() sched: Use clamp() and clamp_val() to make sys_nice() more readable sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups() sched/numa: Fix initialization of sched_domain_topology for NUMA sched: Call select_idle_sibling() when not affine_sd sched: Simplify return logic in sched_read_attr() sched: Simplify return logic in sched_copy_attr() sched: Fix exec_start/task_hot on migrated tasks arm64: Remove TIF_POLLING_NRFLAG metag: Remove TIF_POLLING_NRFLAG sched/idle: Make cpuidle_idle_call() void sched/idle: Reflow cpuidle_idle_call() sched/idle: Delay clearing the polling bit ...
2014-06-03Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull perf updates from Ingo Molnar: "The tooling changes maintained by Jiri Olsa until Arnaldo is on vacation: User visible changes: - Add -F option for specifying output fields (Namhyung Kim) - Propagate exit status of a command line workload for record command (Namhyung Kim) - Use tid for finding thread (Namhyung Kim) - Clarify the output of perf sched map plus small sched command fixes (Dongsheng Yang) - Wire up perf_regs and unwind support for ARM64 (Jean Pihet) - Factor hists statistics counts processing which in turn also fixes several bugs in TUI report command (Namhyung Kim) - Add --percentage option to control absolute/relative percentage output (Namhyung Kim) - Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by completion scripts (Ramkumar Ramachandra) Development/infrastructure changes and fixes: - Android related fixes for pager and map dso resolving (Michael Lentine) - Add libdw DWARF post unwind support for ARM (Jean Pihet) - Consolidate types.h for ARM and ARM64 (Jean Pihet) - Fix possible null pointer dereference in session.c (Masanari Iida) - Cleanup, remove unused variables in map_switch_event() (Dongsheng Yang) - Remove nr_state_machine_bugs in perf latency (Dongsheng Yang) - Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra) - Cleanups for perf.h header (Jiri Olsa) - Consolidate types.h and export.h within tools (Borislav Petkov) - Move u64_swap union to its single user's header, evsel.h (Borislav Petkov) - Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin) - Handle EINTR error for readn/writen (Namhyung Kim) - Add a test case for hists filtering (Namhyung Kim) - Share map_groups among threads of the same group (Arnaldo Carvalho de Melo, Jiri Olsa) - Making some code (cpu node map and report parse callchain callback) global to be usable by upcomming changes (Don Zickus) - Fix pmu object compilation error (Jiri Olsa) Kernel side changes: - intrusive uprobes fixes from Oleg Nesterov. Since the interface is admin-only, and the bug only affects user-space ("any probed jmp/call can kill the application"), we queued these fixes via the development tree, as a special exception. - more fuzzer motivated race fixes and related refactoring and robustization. - allow PMU drivers to be built as modules. (No actual module yet, because the x86 Intel uncore module wasn't ready in time for this)" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) perf tools: Add automatic remapping of Android libraries perf tools: Add cat as fallback pager perf tests: Add a testcase for histogram output sorting perf tests: Factor out print_hists_*() perf tools: Introduce reset_output_field() perf tools: Get rid of obsolete hist_entry__sort_list perf hists: Reset width of output fields with header length perf tools: Skip elided sort entries perf top: Add --fields option to specify output fields perf report/tui: Fix a bug when --fields/sort is given perf tools: Add ->sort() member to struct sort_entry perf report: Add -F option to specify output fields perf tools: Call perf_hpp__init() before setting up GUI browsers perf tools: Consolidate management of default sort orders perf tools: Allow hpp fields to be sort keys perf ui: Get rid of callback from __hpp__fmt() perf tools: Consolidate output field handling to hpp format routines perf tools: Use hpp formats to sort final output perf tools: Support event grouping in hpp ->sort() perf tools: Use hpp formats to sort hist entries ...
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-03Merge branch 'for-v3.16' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping into next Pull CMA and DMA-mapping fixes from Marek Szyprowski: "A few fixes for dma-mapping and CMA subsystems" * 'for-v3.16' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: CMA: correct unlock target drivers/base/dma-contiguous.c: erratum of dev_get_cma_area arm: dma-mapping: add checking cma area initialized arm: dma-iommu: Clean up redundant variable cma: Remove potential deadlock situation
2014-06-03Merge tag 'spi-v3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into next Pull spi updates from Mark Brown: "For this release SPI has been exceptionally quiet, all the work has been on improving drivers (including taking advantage of some of the recent framework updates): - DMA support for the rspi driver providing a nice performance boost - performance improvement for the SIRF controller in PIO mode - new support for the Cadence SPI IP and for pxa2xx on BayTrail" * tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits) spi: rspi: Extract rspi_common_transfer() spi: rspi: Add DMA support for RSPI on RZ/A1H spi: rspi: Add DMA support for QSPI on R-Car Gen2 spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one() spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer() spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma() spi: rspi: Move RSPI-specific setup out of DMA routines spi: rspi: Use SPI core DMA mapping framework spi: rspi: SPI DMA core needs both RX and TX DMA to function spi: rspi: Remove unneeded resource test in DMA setup spi: rspi: Extract rspi_request_dma_chan() spi: rspi: Don't consider DMA configuration failures fatal spi: rspi: Extract rspi_pio_transfer() spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling spi: rspi: Remove unused 16-bit DMA support spi: rspi: Do not call rspi_receive_init() for TX-only spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}() spi/pxa2xx: fix runtime PM enabling order spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans() spi: core: Ignore unsupported spi-[tr]x-bus-width property values ...
2014-06-03Merge tag 'pinctrl-v3.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next Pull pin control changes from Linus Walleij: "This is the bulk of pin control changes for the v3.16 development cycle: - Antoine Tenart made the get_group_pins() vtable entry optional. - Antoine also provides an entirely new driver for the Marvell Berlin SoC. This is unrelated to the existing MVEBU hardware driver and warrants its own separate driver. - reflected from the GPIO subsystem there is a number of refactorings to make pin control drivers with gpiochips use the new gpiolib irqchip helpers. The following drivers were converted to use the new infrastructure: * ST Microelectronics STiH416 and friends * The Atmel AT91 * The CSR SiRF (Prima2) * The Qualcomm MSM series - massive improvements in the Qualcomm MSM driver from Bjorn Andersson, Andy Gross and Kumar Gala. Among those new support for the IPQ8064 and MSM8x74 SoC variants. - support for the Freescale i.MX6 SoloX SoC variant. - massive improvements in the Allwinner sunxi driver from Boris Brezillon, Maxime Ripard and Chen-Yu Tsai. - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto, Wolfram Sang and Magnus Damm. - Cleanups and refactorings of the nVidia Tegra driver from Stepgen Warren. - the Exynos driver now supports the Exynos3250 SoC. - Intel BayTrail updates from Jin Yao, Mika Westerberg. - the MVEBU driver now supports the Orion5x SoC variants, which is part of the effort of getting rid of the old Marvell kludges in arch/arm/mach-orion5x - Rockchip driver updates from Heiko Stuebner. - a ton of cleanups and janitorial patches from Axel Lin. - some minor fixes and improvements here and there" * tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits) pinctrl: sirf: fix a bad conflict resolution pinctrl: msm: Add more MSM8X74 pin definitions pinctrl: qcom: ipq8064: Fix naming convention pinctrl: msm: Add missing sdc1 and sdc3 groups pinctrl: sirf: switch to using allocated state container pinctrl: Enable "power-source" to be extracted from DT files pinctrl: sunxi: create irq/pin mapping during init pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy pinctrl: berlin: Use devm_ioremap_resource() pinctrl: sirf: fix typo for GPIO bank number pinctrl: sunxi: depend on RESET_CONTROLLER pinctrl: sunxi: fix pin numbers passed to register offset helpers pinctrl: add pinctrl driver for imx6sx pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs pinctrl: msm: switch to using generic GPIO irqchip helpers pinctrl: sunxi: Fix multiple registration issue pinctrl: sunxi: Fix recursive dependency pinctrl: berlin: add the BG2CD pinctrl driver pinctrl: berlin: add the BG2 pinctrl driver pinctrl: berlin: add the BG2Q pinctrl driver ...
2014-06-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into next Pull first set of s390 updates from Martin Schwidefsky: "The biggest change in this patchset is conversion from the bootmem bitmaps to the memblock code. This conversion requires two common code patches to introduce the 'physmem' memblock list. We experimented with ticket spinlocks but in the end decided against them as they perform poorly on virtualized systems. But the spinlock cleanup and some small improvements are included. The uaccess code got another optimization, the get_user/put_user calls are now inline again for kernel compiles targeted at z10 or newer machines. This makes the text segment shorter and the code gets a little bit faster. And as always some bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/lowcore: replace lowcore irb array with a per-cpu variable s390/lowcore: reserve 96 bytes for IRB in lowcore s390/facilities: remove extract-cpu-time facility check s390: require mvcos facility for z10 and newer machines s390/boot: fix boot of compressed kernel built with gcc 4.9 s390/cio: remove weird assignment during argument evaluation s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall s390/oprofile: make return of 0 explicit s390/spinlock: refactor arch_spin_lock_wait[_flags] s390/rwlock: add missing local_irq_restore calls s390/spinlock,rwlock: always to a load-and-test first s390/cio: fix multiple structure definitions s390/spinlock: fix system hang with spin_retry <= 0 s390/appldata: add slab.h for kzalloc/kfree s390/uaccess: provide inline variants of get_user/put_user s390/pci: add some new arch specific pci attributes s390/pci: use pdev->dev.groups for attribute creation s390/pci: use macro for attribute creation s390/pci: improve state check when processing hotplug events s390: split TIF bits into CIF, PIF and TIF bits ...
2014-06-03Merge tag 'usb-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next Pull USB driver updates from Greg KH: "Here is the big USB driver pull request for 3.16-rc1. Nothing huge here, but lots of little things in the USB core, and in lots of drivers. Hopefully the USB power management will be work better now that it has been reworked to do per-port power control dynamically. There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG is finally gone now that everything has been converted over to the dynamic debug inteface, the last hold-out drivers were cleaned up and the config option removed. There were also other minor things all through the drivers/usb/ tree, the shortlog shows this pretty well. All have been in linux-next, including the very last patch, which came from linux-next to fix a build issue on some platforms" * tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits) usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y USB: orinoco_usb: remove CONFIG_USB_DEBUG support USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support USB: media: streamzap: remove CONFIG_USB_DEBUG USB: media: redrat3: remove CONFIG_USB_DEBUG usage USB: media: redrat3: remove unneeded tracing macro usb: qcserial: add additional Sierra Wireless QMI devices usb: host: max3421-hcd: Use module_spi_driver usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue() usb: qcserial: add Netgear AirCard 341U Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2 usb: host: xhci-plat: add xhci_plat_start() usb: host: max3421-hcd: Fix potential NULL urb dereference Revert "usb: gadget: net2280: Add support for PLX USB338X" USB: usbip: remove CONFIG_USB_DEBUG reference USB: remove CONFIG_USB_DEBUG from defconfig files usb: resume child device when port is powered on usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y ...