summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-04-13don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !int_irq was probably always true. Better use (int)int_irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: init cannot ignore signals sent by force_sig_info()Matt Fleming
We can delete the code that checks to see if we're sending an ignored signal to init because force_sig_info() already handles this case. force_sig_info() will kill init even if the signal handler is SIG_DFL and the scenario described in the comment where init might "generate the same exception over and over again" cannot occur (force_sig_info() clears SIGNAL_UNKILLABLE to ensure that init will die). Also, the use of is_global_init() is not correct in the multhreaded case, as Oleg Nesterov explains, "is_global_init() is not right in theory, /sbin/init can be multithreaded. And, this doesn't cover the sub-namespace inits... I'd suggest to check SIGNAL_UNKILLABLE, but looking closer I think you can simply remove this code." It seems this code was copied from arch/powerpc in March 2007 in commit 623b0355d5b1 "[AVR32] Clean up exception handling code" but the code was deleted from arch/powerpc in November 2009 in commit a0592d42fe3e "powerpc: kill the obsolete code under is_global_init()" So catch up with powerpc and delete the bogus code. Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: fix deadlock when reading clock list in debugfsOle Henrik Jahren
When writing out /sys/kernel/debug/at32ap_clk, clock list lock is being held while clk_get() is called. clk_get() attempts to take the same lock, which results in deadlock. Introduce and call lock free version, __clk_get(), instead. Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: Fix .size directive for cpu_enter_idleBen Hutchings
gas used to accept (and ignore?) .size directives which referred to undefined symbols, as this does. In binutils 2.21 these are treated as errors. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototypeJean-Christophe PLAGNIOL-VILLARD
introduce in commit d75f1bfdbccb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13fix the wrong argument of the functions definitionWanlong Gao
The functions of eic_chip's memebers use the wrong argument . Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-12m68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, ↵Geert Uytterhoeven
syncfs Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-13ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()Eric Miao
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup event. It is misinterpreted as a gpio irq not a PWER bitmask. Fixed this by converting the incorrect IRQ_TO_IRQ() to a correct version of irq_to_gpio(). Reported-by: Nick Bane <nickbane1@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: fix XEN_SAVE_RESTORE Kconfig dependencies PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
2011-04-12ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt numberHaojian Zhuang
Avoid to mismatch between NR_BUILTIN_GPIO and gpio interrupt number. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt numberHaojian Zhuang
Avoid to mismatch between NR_BUILTIN_GPIO and GPIO interrupt number Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12ARM: pxa: always clear LPM bits for PXA168 MFPRHaojian Zhuang
Bit[9:7] should always be zero in PXA168. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12powerpc/85xx: disable Suspend support if SMP enabledKumar Gala
We currently dont have CPU Hotplug support working on 85xx so we need to disable Suspsend support as it will force enabling of CPU Hotplug. arch/powerpc/kernel/built-in.o: In function `cpu_die': arch/powerpc/kernel/smp.c:702: undefined reference to `start_secondary_resume' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZEScott Wood
e500mc does not support the HID0/MSR mechanism that is used by e500_idle (and there are also issues with waking on certain types of interrupts). Further, even if napping is never actually enabled, just having CPU_FTR_CAN_NAP will cause machine_init() to overwrite the board's supplied ppc_md.power_save(). We drop CPU_FTR_MAYBE_CAN_DOZE becuase we should use 'wait' instead on e500mc. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/book3e: Fix CPU feature handling on 64-bit e5500Kumar Gala
The CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS defines did not encompass e5500 CPU features when built for 64-bit. This causes issues with cpu_has_feature() as it utilizes the POSSIBLE & ALWAYS defines as part of its check. Create a unique CPU_FTRS_E5500 (as its different from CPU_FTRS_E500MC), created a new group for 64-bit Book3e based CPUs and add CPU_FTRS_E5500 to that group. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc: Check device status before adding serial devicePrabhakar Kushwaha
serial port nodes with the property status="disabled" are not usable and so avoid adding "disabled" port with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12powerpc/85xx: Don't add disabled PCIe devicesPrabhakar Kushwaha
PCIe nodes with the property status="disabled" are not usable and so avoid adding "disabled" PCIe bridge with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-12x86/mrst: Fix boot crash caused by incorrect pin to irq mappingJacob Pan
Moorestown systems crash on boot because the secondary CPU clockevent (apbt1) will fail to request irq#1, which does not have ioapic chip in its irq_desc[] entry. Background: Moorestown platform does not have ISA bus nor legacy IRQs. It reuses the range of legacy IRQs for regular device interrupts. The routing information of early system device IRQs (timers) are obtained from firmware provided SFI tables. We reuse/fake MP configuration table to facilitate IRQ setup with IOAPIC. Maintaining a 1:1 mapping of IOAPIC pin (RTE entry) and IRQ# makes routing information clean and easy to understand on Moorestown. Though optional. This patch allows SFI timer and vRTC IRQ to be treated as ISA IRQ so that pin2irq mapping will be 1:1. Also fixed MP table type and use macros to clearly set MP IRQ entries. As a result, apbt timer and RTC interrupts on Moorestown are within legacy IRQ range: # cat /proc/interrupts CPU0 CPU1 0: 11249 0 IO-APIC-edge apbt0 1: 0 12271 IO-APIC-edge apbt1 8: 887 0 IO-APIC-fasteoi dw_spi 13: 0 0 IO-APIC-fasteoi INTEL_MID_DMAC2 14: 0 0 IO-APIC-fasteoi rtc0 Further discussion of this patch can be found at: https://lkml.org/lkml/2010/6/10/70 Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Link: http://lkml.kernel.org/r/1302286980-21139-1-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11Merge branch 'stable/bug-fixes-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Allow PV-OPS kernel to detect whether XSAVE is supported xen: just completely disable XSAVE xen/debug: Don't be so verbose with WARN on 1-1 mapping errors. xen: events: fix error checks in bind_*_to_irqhandler()
2011-04-11fix XEN_SAVE_RESTORE Kconfig dependenciesShriram Rajagopalan
Make XEN_SAVE_RESTORE select HIBERNATE_CALLBACKS. Remove XEN_SAVE_RESTORE dependency from PM_SLEEP. Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-11PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki
Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-11x86/ce4100: Add reg property to bridgesSebastian Andrzej Siewior
without the reg property Ben's new code won't find the PCI & ISA bridge and the devices won't get the DT-node attached. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: monstr@monstr.eu Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: http://lkml.kernel.org/r/20110407121315.GA9204@linutronix.de Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-10ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile.Justin P. Mattock
The patch below removes an unused config variable found by using a kernel cleanup script. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6868/1: Preserve the VFP state during forkCatalin Marinas
VFP registers d16-d31 are callee saved registers and must be preserved during function calls, including fork(). The VFP configuration should also be preserved. The patch copies the full VFP state to the child process. Reported-by: Paul Wright <paul.wright@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6867/1: Introduce THREAD_NOTIFY_COPY for copy_thread() hooksCatalin Marinas
This patch adds THREAD_NOTIFY_COPY for calling registered handlers during the copy_thread() function call. It also changes the VFP handler to use a switch statement rather than if..else and ignore this event. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6866/1: Do not restrict HIGHPTE to !OUTER_CACHECatalin Marinas
The HIGHPTE config option depends on !OUTER_CACHE. However, there is no set_pte_ext() function that does outer cache maintenance by physical address, hence no need for such restriction. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6865/1: perf: ensure pass through zero is counted on overflowWill Deacon
Commit a737823d ("ARM: perf: ensure overflows aren't missed due to IRQ latency") changed the way that event deltas are calculated on overflow so that we don't miss events when the new count value overtakes the previous one. Unfortunately, we forget to count the event that passes through zero so we end up being off by 1. This patch adds on the correction. Reported-by: Chris Moore <moore@free.fr> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6864/1: hw_breakpoint: clear DBGVCR out of resetWill Deacon
The DBGVCR, used for configuring vector catch debug events, is UNKNOWN out of reset on ARMv7. When enabling monitor mode, this must be zeroed to avoid UNPREDICTABLE behaviour. This patch adds the zeroing code to the debug reset path. Cc: stable <stable@kernel.org> Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-08Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] compile fix for latest binutils [S390] cio: prevent purging of CCW devices in the online state [S390] qdio: fix init sequence [S390] Fix parameter passing for smp_switch_to_cpu() [S390] oprofile s390: prevent stack corruption
2011-04-07Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: efifb: Add override for 11" Macbook Air 3,1 efifb: Support overriding fields FW tells us with the DMI data. fb: Reduce priority of resource conflict message savagefb: Remove obsolete else clause in savage_setup_i2c_bus savagefb: Set up I2C based on chip family instead of card id savagefb: Replace magic register address with define drivers/video/bfin-lq035q1-fb.c: introduce missing kfree video: s3c-fb: fix checkpatch errors and warning efifb: support AMD Radeon HD 6490 s3fb: fix Virge/GX2 fbcon: Remove unused 'display *p' variable from fb_flashcursor() fbdev: sh_mobile_lcdcfb: fix module lock acquisition fbdev: sh_mobile_lcdcfb: add blanking support viafb: initialize margins correct viafb: refresh rate bug collection sh: mach-ap325rxa: move backlight control code sh: mach-ecovec24: support for main lcd backlight
2011-04-07Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: arch-shmobile: only run FSI init on respective boards ARM: arch-shmobile: only run HDMI init on respective boards ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKEREL
2011-04-07Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: select ARCH_NO_SYSDEV_OPS. sh: fix build error in board-sh7757lcr.c sh: landisk: Remove whitespace sh: landisk: Remove mv_nr_irqs sh: sh-sci: Fix double initialization by serial_console_setup serial: sh-sci: prevent setup of uninitialized serial console dma: shdma: add checking the DMAOR_AE in sh_dmae_err
2011-04-07Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', ↵Linus Torvalds
'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix FPU exception handling on non-SSE systems x86, hibernate: Initialize mmu_cr4_features during boot x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change x86: visws: Fixup irq overhaul fallout * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Clean up rebalance_domains() load-balance interval calculation * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mrst/vrtc: Fix boot crash in mrst_rtc_init() rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm() * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix cpumask leak in __setup_irq() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf probe: Fix listing incorrect line number with inline function perf probe: Fix to find recursively inlined function perf probe: Fix multiple --vars options behavior perf probe: Fix to remove redundant close perf probe: Fix to ensure function declared file
2011-04-07Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: move and fix substitue search for missing CPUID entries KVM: fix XSAVE bit scanning KVM: Enable async page fault processing KVM: fix crash on irqfd deassign
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-07x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()Feng Tang
The sfi_mrtc_array[] only gets initialized when the sfi mrtc table is parsed, so the vrtc_paddr should be initalized after it too. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-06x86-32, fpu: Fix FPU exception handling on non-SSE systemsHans Rosenfeld
On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU context switches), FPU exceptions in user mode cause Oopses, BUGs, recursive faults and other nasty things: fpu exception: 0000 [#1] last sysfs file: /sys/power/state Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan] Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b-dirty #633 VP3-596B-DD/VT82C597 EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0 EIP is at math_error+0x1b4/0x1c8 EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00 ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000) Stack: 00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001 <0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380 <0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380 Call Trace: [<c1019a6b>] ? need_resched+0x11/0x1a [<c1019a79>] ? should_resched+0x5/0x1f [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c100353b>] ? do_coprocessor_error+0x0/0x11 [<c12d5965>] ? error_code+0x65/0x70 Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6 EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c This usually continues in slight variations until the system is reset. This bug was introduced by commit 58a992b9cbaf449aeebd3575c3695a9eb5d95b5e: x86-32, fpu: Rewrite fpu_save_init() Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-06x86, hibernate: Initialize mmu_cr4_features during bootH. Peter Anvin
Restore the initialization of mmu_cr4_features during boot, which was removed without comment in checkin e5f15b45ddf3afa2bbbb10c7ea34fb32b6de0a0e x86: Cleanup highmap after brk is concluded thereby breaking resume from hibernate. This restores previous functionality in approximately the same place, and corrects the reading of %cr4 on pre-CPUID hardware (%cr4 exists if and only if CPUID is supported.) However, part of the problem is that the hibernate suspend/resume sequence should manage the save/restore of %cr4 explicitly. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <201104020154.57136.rjw@sisk.pl>
2011-04-06sh: select ARCH_NO_SYSDEV_OPS.Paul Mundt
Now that everything that was using these interfaces has been converted to the syscore ops, prevent new code from using the old API. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: arch-shmobile: only run FSI init on respective boardsKuninori Morimoto
If several boards are enabled in the kernel configuration, fsi_init_pm_clock() functions from board-ap4evb.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: arch-shmobile: only run HDMI init on respective boardsGuennadi Liakhovetski
If several boards are enabled in the kernel configuration, hdmi_init_pm_clock() functions from board-ap4evb.c and board-mackerel.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKERELSimon Horman
I made a bit of a thinko when adding Mackerel to the boards that support zboot using MMCIF. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06xen: Allow PV-OPS kernel to detect whether XSAVE is supportedShan Haitao
Xen fails to mask XSAVE from the cpuid feature, despite not historically supporting guest use of XSAVE. However, now that XSAVE support has been added to Xen, we need to reliably detect its presence. The most reliable way to do this is to look at the OSXSAVE feature in cpuid which is set iff the OS (Xen, in this case), has set CR4.OSXSAVE. [ Cleaned up conditional a bit. - Jeremy ] Signed-off-by: Shan Haitao <haitao.shan@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-06xen: just completely disable XSAVEJeremy Fitzhardinge
Some (old) versions of Xen just kill the domain if it tries to set any unknown bits in CR4, so we can't reliably probe for OSXSAVE in CR4. Since Xen doesn't support XSAVE for guests at the moment, and no such support is being worked on, there's no downside in just unconditionally masking XSAVE support. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-06KVM: move and fix substitue search for missing CPUID entriesAndre Przywara
If KVM cannot find an exact match for a requested CPUID leaf, the code will try to find the closest match instead of simply confessing it's failure. The implementation was meant to satisfy the CPUID specification, but did not properly check for extended and standard leaves and also didn't account for the index subleaf. Beside that this rule only applies to CPUID intercepts, which is not the only user of the kvm_find_cpuid_entry() function. So fix this algorithm and call it from kvm_emulate_cpuid(). This fixes a crash of newer Linux kernels as KVM guests on AMD Bulldozer CPUs, where bogus values were returned in response to a CPUID intercept. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06KVM: fix XSAVE bit scanningAndre Przywara
When KVM scans the 0xD CPUID leaf for propagating the XSAVE save area leaves, it assumes that the leaves are contigious and stops at the first zero one. On AMD hardware there is a gap, though, as LWP uses leaf 62 to announce it's state save area. So lets iterate through all 64 possible leaves and simply skip zero ones to also cover later features. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-05powerpc/pseries: Fix build without CONFIG_HOTPLUG_CPUMatt Evans
Signed-off-by: Matt Evans <matt@ozlabs.au.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc: Set nr_cpu_ids early and use it to free PACAsRyan Grimm
Without this, "holes" in the CPU numbering can cause us to free too many PACAs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc/pseries: Don't register global initcallBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc/kexec: Fix mismatched ifdefs for PPC64/SMP.Paul Gortmaker
Commit b3df895aebe091b1657 "powerpc/kexec: Add support for FSL-BookE" introduced the original PPC_STD_MMU_64 checks around the function crash_kexec_wait_realmode(). Then commit c2be05481f61252 "powerpc: Fix default_machine_crash_shutdown #ifdef botch" changed the ifdef around the calling site to add a check on SMP, but the ifdef around the function itself was left unchanged, leaving an unused function for PPC_STD_MMU_64=y and SMP=n Rather than have two ifdefs that can get out of sync like this, simply put the corrected conditional around the function and use a stub to get rid of one set of ifdefs completely. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 16:30:47 +0000