summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-03-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-07Merge tag 's390-5.6-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix panic in gup_fast on large pud by providing an implementation of pud_write. This has been overlooked during migration to common gup code. - Fix unexpected write combining on PCI stores. * tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix unexpected write combine on resource s390/mm: fix panic in gup_fast on large pud
2020-03-07Merge tag 'powerpc-5.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6: - One fix for a recent regression to our breakpoint/watchpoint code. - Another fix for our KUAP support, this time a missing annotation in a rarely used path in signal handling. - A fix for our handling of a CPU feature that effects the PMU, when booting guests in some configurations. - A minor fix to our linker script to explicitly include the .BTF section. Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger" * tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix missing KUAP disable in flush_coherent_icache() powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems powerpc: Include .BTF section powerpc/watchpoint: Don't call dar_within_range() for Book3S
2020-03-06Merge tag 'riscv-for-linus-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes that I would like to target for 5.6: - A pair of fixes to module loading, which we hope solve the last of the issues with module text being loaded too sparsely for our call relocations. - A Kconfig fix that disallows selecting memory models not supported by NOMMU. - A series of Kconfig updates to ease selecting the drivers necessary to run on QEMU's virt platform. - DTS updates for SiFive's HiFive Unleashed. - A fix to our seccomp support that avoids mangling restartable syscalls" * tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix seccomp reject syscall code path riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file RISC-V: Select Goldfish RTC driver for QEMU virt machine RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine RISC-V: Enable QEMU virt machine support in defconfigs RISC-V: Add kconfig option for QEMU virt machine riscv: Fix range looking for kernel image memblock riscv: Force flat memory model with no-mmu riscv: Change code model of module to medany to improve data accessing riscv: avoid the PIC offset of static percpu data in module beyond 2G limits
2020-03-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here are another three arm64 fixes for 5.6, all pretty minor. Main thing is fixing a silly bug in the fsl_imx8_ddr PMU driver where we would zero the counters when disabling them. - Fix misreporting of ASID limit when KPTI is enabled - Fix busted NULL pointer checks for GICC structure in ACPI PMU code - Avoid nobbling the "fsl_imx8_ddr" PMU counters when disabling them" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: context: Fix ASID limit in boot messages drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
2020-03-06arch/Kconfig: update HAVE_RELIABLE_STACKTRACE descriptionMiroslav Benes
save_stack_trace_tsk_reliable() is not the only function providing the reliable stack traces anymore. Architecture might define ARCH_STACKWALK which provides a newer stack walking interface and has arch_stack_walk_reliable() function. Update the description accordingly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/20200120154042.9934-1-mbenes@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-05riscv: fix seccomp reject syscall code pathTycho Andersen
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()Michael Ellerman
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
2020-03-04riscv: Fix range looking for kernel image memblockAlexandre Ghiti
When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04Merge tag 'socfpga_defconfig_fix_for_v5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes ARM: socfpga_defconfig: add back DEBUGFS - Add back DEBUG_FS for socfpga_defconfig * tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: Add back DEBUG_FS Link: https://lore.kernel.org/r/20200304101917.1243-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <stable@vger.kernel.org> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04ARM: socfpga_defconfig: Add back DEBUG_FSDinh Nguyen
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it for development purposes. Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: avoid the PIC offset of static percpu data in module beyond 2G limitsVincent Chen
The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Suggested-by: Alexandre Ghiti <alex@ghiti.fr> Suggested-by: Anup Patel <anup@brainfault.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Carlos de Paula <me@carlosedp.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03arm64: dts: socfpga: agilex: Fix gmac compatibleLey Foon Tan
Fix gmac compatible string to "altr,socfpga-stmmac-a10-s10". Gmac for Agilex should use same compatible as Stratix 10. Fixes: 4b36daf9ada3 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA") Cc: stable@vger.kernel.org Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-02Merge tag 'arm-soc/for-5.6/defconfig-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs defconfig file(s) fixes for v5.6, please pull the following: - Stefan restores CONFIG_DEBUG_FS from the bcm2835_defconfig which was accidentally removed * tag 'arm-soc/for-5.6/defconfig-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS Link: https://lore.kernel.org/r/20200302195043.14513-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-02Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.6-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK Link: https://lore.kernel.org/r/7hr1yc9cc1.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-02ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FSStefan Wahren
The commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") accidentally dropped the DEBUG FS support in bcm2835_defconfig. So restore the config as before the commit. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-03-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a pkeys fix for a bug that triggers with weird BIOS settings, and two Xen PV fixes: a paravirt interface fix, and pagetable dumping fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix dump_pagetables with Xen PV x86/ioperm: Add new paravirt function update_io_bitmap() x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
2020-03-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Three fixes to EFI mixed boot mode, mostly related to x86-64 vmap stacks activated years ago, bug-fixed recently for EFI, which had knock-on effects of various 1:1 mapping assumptions in mixed mode. There's also a READ_ONCE() fix for reading an mmap-ed EFI firmware data field only once, out of caution" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: READ_ONCE rng seed size before munmap efi/x86: Handle by-ref arguments covering multiple pages in mixed mode efi/x86: Remove support for EFI time and counter services in mixed mode efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper
2020-03-02arm64: context: Fix ASID limit in boot messagesJean-Philippe Brucker
Since commit f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use"), the NUM_USER_ASIDS macro doesn't correspond to the effective number of ASIDs when KPTI is enabled. Get an accurate number of available ASIDs in an arch_initcall, once we've discovered all CPUs' capabilities and know if we still need to halve the ASID space for KPTI. Fixes: f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use") Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "More bugfixes, including a few remaining "make W=1" issues such as too large frame sizes on some configurations. On the ARM side, the compiler was messing up shadow stacks between EL1 and EL2 code, which is easily fixed with __always_inline" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: check descriptor table exits on instruction emulation kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter arm64: Ask the compiler to __always_inline functions used by KVM at HYP KVM: arm64: Define our own swab32() to avoid a uapi static inline KVM: arm64: Ask the compiler to __always_inline functions used at HYP kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe() KVM: arm/arm64: Fix up includes for trace.h
2020-03-01KVM: VMX: check descriptor table exits on instruction emulationOliver Upton
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-01arm64: dts: meson: fix gxm-khadas-vim2 wifiChristian Hewitt
before [6.418252] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.435663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.551259] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed [6.551275] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x00184000 [6.551352] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed after [6.657165] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.660807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918643] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918734] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [6.922724] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c Fixes: adc52bf7ef16 ("arm64: dts: meson: fix mmc v2 chips max frequencies") Suggested-by: Art Nikpal <email2tema@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/1582212790-11402-1-git-send-email-christianshewitt@gmail.com
2020-02-29Merge tag 'arm-soc/for-5.6/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Stefan adds missing Device Tree properties for the Raspberry Pi 3B and 4 LEDs to have proper default configuration - Nicolas adds an alias for the PCIe root complex node that is looked up by the Raspberry Pi firmware for patching in specific properties * tag 'arm-soc/for-5.6/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED Link: https://lore.kernel.org/r/20200228181144.15148-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-29Merge tag 'omap-for-v5.6/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few fixes for omaps for v5.6-rc cycle This series of changes contains few code fixes for issues recently discovered: - A build fix for ARMv6 only configs when CONFIG_HAVE_ARM_SMCCC is not set - A fix for ti-sysc quirk handling for 1-wire hdq reset And a handful of dts fixes that I had queued up and should have already sent earlier instead of waiting for the code fixes to get sorted out: - Fix naming of vsys_3v3 regulator for dra7-evm - Fix incorrect OPP node names for am437x-idk-evm - Fix IPU1 mux clock parent source for dra7 - Add missing PWM property for dra7 timers 13 to 16 - Add missing dma-ranges for dra7 PCIe nodes - Fix mmc3 max-frequency for dra76x * tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: dra7-l4: mark timer13-16 as pwm capable ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source ARM: dts: am437x-idk-evm: Fix incorrect OPP node names ARM: dts: dra7-evm: Rename evm_3v3 regulator to vsys_3v3 Link: https://lore.kernel.org/r/pull-1582903541-589933@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-29arm64: dts: meson-sm1-sei610: add missing interrupt-namesGuillaume La Roque
add missing "host-wakeup interrupt names Fixes: 30388cc07572 ("arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt") Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200117133423.22602-1-glaroque@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-02-29ARM: meson: Drop unneeded select of COMMON_CLKGeert Uytterhoeven
Support for Amlogic Meson SoCs depends on ARCH_MULTI_V7, and thus on ARCH_MULTIPLATFORM. As the latter selects COMMON_CLK, there is no need for ARCH_MESON to select COMMON_CLK. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200121103722.1781-12-geert+renesas@glider.be Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-02-29x86/mm: Fix dump_pagetables with Xen PVJuergen Gross
Commit 2ae27137b2db89 ("x86: mm: convert dump_pagetables to use walk_page_range") broke Xen PV guests as the hypervisor reserved hole in the memory map was not taken into account. Fix that by starting the kernel range only at GUARD_HOLE_END_ADDR. Fixes: 2ae27137b2db89 ("x86: mm: convert dump_pagetables to use walk_page_range") Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Julien Grall <julien@xen.org> Link: https://lkml.kernel.org/r/20200221103851.7855-1-jgross@suse.com
2020-02-29x86/ioperm: Add new paravirt function update_io_bitmap()Juergen Gross
Commit 111e7b15cf10f6 ("x86/ioperm: Extend IOPL config to control ioperm() as well") reworked the iopl syscall to use I/O bitmaps. Unfortunately this broke Xen PV domains using that syscall as there is currently no I/O bitmap support in PV domains. Add I/O bitmap support via a new paravirt function update_io_bitmap which Xen PV domains can use to update their I/O bitmaps via a hypercall. Fixes: 111e7b15cf10f6 ("x86/ioperm: Extend IOPL config to control ioperm() as well") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Cc: <stable@vger.kernel.org> # 5.5 Link: https://lkml.kernel.org/r/20200218154712.25490-1-jgross@suse.com
2020-02-28Merge tag 'kvmarm-fixes-5.6-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.6, take #1 - Fix compilation on 32bit - Move VHE guest entry/exit into the VHE-specific entry code - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
2020-02-28kvm: x86: Limit the number of "kvm: disabled by bios" messagesErwan Velu
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: x86: avoid useless copy of cpufreq policyPaolo Bonzini
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: allow disabling -WerrorPaolo Bonzini
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: x86: allow compiling as non-module with W=1Valdis Klētnieks
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipisWanpeng Li
Nick Desaulniers Reported: When building with: $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000 The following warning is observed: arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=] static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector) ^ Debugging with: https://github.com/ClangBuiltLinux/frame-larger-than via: $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \ kvm_send_ipi_mask_allbutself points to the stack allocated `struct cpumask newmask` in `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as 8192, making a single instance of a `struct cpumask` 1024 B. This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for both pv tlb and pv ipis.. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: Introduce pv check helpersWanpeng Li
Introduce some pv check helpers for consistency. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: SVM: allocate AVIC data structures based on kvm_amd module parameterPaolo Bonzini
Even if APICv is disabled at startup, the backing page and ir_list need to be initialized in case they are needed later. The only case in which this can be skipped is for userspace irqchip, and that must be done because avic_init_backing_page dereferences vcpu->arch.apic (which is NULL for userspace irqchip). Tested-by: rmuncrief@humanavance.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systemsDesnes A. Nunes do Rosario
PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch. The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems. Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG") Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
2020-02-27ARM: dts: bcm2711: Add pcie0 aliasNicolas Saenz Julienne
Some bcm2711 revisions have different DMA constraints on the their PCIE bus. The lower common denominator, being able to access the lower 3GB of memory, is the default setting for now. Newer SoC revisions are able to access the whole memory space. Raspberry Pi 4's firmware is aware of this limitation and will correct the PCIE's dma-ranges property if a pcie0 alias is available. So add it. Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-02-27ARM: dts: bcm283x: Add missing properties to the PWR LEDStefan Wahren
This adds the missing properties to the PWR LED for the RPi 3 & 4 boards, which are already set for the other boards. Without them we will lose the LED state after suspend. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-02-27Merge tag 'tee-amdtee-fix-for-5.6' of ↵Olof Johansson
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix AMDTEE memory leak in amdtee_open_session() * tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits) tee: amdtee: fix memory leak in amdtee_open_session() Linux 5.6-rc2 ext4: improve explanation of a mount failure caused by a misconfigured kernel Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member IB/mlx5: Use div64_u64 for num_var_hw_entries calculation nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails cifs: make sure we do not overflow the max EA buffer size cifs: enable change notification for SMB2.1 dialect netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() ... Link: https://lore.kernel.org/r/20200227165205.GA7926@jade Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 04:22:10 +0000