summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-11-05arch/powerpc/mm/numa.c: do not allocate bootmem memory for non existing nodesRaghavendra K T
With the setup_nr_nodes(), we have already initialized node_possible_map. So it is safe to use for_each_node here. There are many places in the kernel that use hardcoded 'for' loop with nr_node_ids, because all other architectures have numa nodes populated serially. That should be reason we had maintained the same for powerpc. But, since sparse numa node ids possible on powerpc, we unnecessarily allocate memory for non existent numa nodes. For e.g., on a system with 0,1,16,17 as numa nodes nr_node_ids=18 and we allocate memory for nodes 2-14. This patch we allocate memory for only existing numa nodes. The patch is boot tested on a 4 node tuleta, confirming with printks that it works as expected. Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Anton Blanchard <anton@samba.org> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05uaccess: reimplement probe_kernel_address() using probe_kernel_read()Andrew Morton
probe_kernel_address() is basically the same as the (later added) probe_kernel_read(). The return value on EFAULT is a bit different: probe_kernel_address() returns number-of-bytes-not-copied whereas probe_kernel_read() returns -EFAULT. All callers have been checked, none cared. probe_kernel_read() can be overridden by the architecture whereas probe_kernel_address() cannot. parisc, blackfin and um do this, to insert additional checking. Hence this patch possibly fixes obscure bugs, although there are only two probe_kernel_address() callsites outside arch/. My first attempt involved removing probe_kernel_address() entirely and converting all callsites to use probe_kernel_read() directly, but that got tiresome. This patch shrinks mm/slab_common.o by 218 bytes. For a single probe_kernel_address() callsite. Cc: Steven Miao <realmz6@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-04Merge tag 'char-misc-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
2015-11-04Merge tag 'driver-core-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-11-04Merge tag 'tty-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
2015-11-04Merge tag 'usb-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.4-rc1. As usual, most of the changes are in the gadget subsystem, and we removed a host controller for a device that is no longer in existance, and probably never was even made public. There is also other minor driver updates and new device ids, full details in the changelog. All of these have been in linux-next for a while" * tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits) USB: core: Codestyle fix in urb.c usb: misc: usb3503: Use i2c_add_driver helper macro usb: host: lpc32xx: don't unregister phy device usb: host: lpc32xx: balance clk enable/disable on removal usb: host: lpc32xx: fix warnings caused by enabling unprepared clock uwb: drp: Use setup_timer uwb: neh: Use setup_timer uwb: rsv: Use setup_timer USB: qcserial: add Sierra Wireless MC74xx/EM74xx usb: chipidea: otg: don't wait vbus drops below BSV when starts host chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE() doc: dt-binding: ci-hdrc-usb2: split vendor specific properties usb: chipidea: imx: add imx6ul usb support doc: dt-binding: ci-hdrc-usb2: improve property description usb: chipidea: imx: add usb support for imx7d Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry usb: chipidea: Add support for 'phy-clkgate-delay-us' property usb: chipidea: Use extcon framework for VBUS and ID detect usb: gadget: net2280: restore ep_cfg after defect7374 workaround usb: dwc2: host: Fix use after free w/ simultaneous irqs ...
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-04Merge tag 'for-linus-4.4-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: - Improve balloon driver memory hotplug placement. - Use unpopulated hotplugged memory for foreign pages (if supported/enabled). - Support 64 KiB guest pages on arm64. - CPU hotplug support on arm/arm64. * tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (44 commits) xen: fix the check of e_pfn in xen_find_pfn_range x86/xen: add reschedule point when mapping foreign GFNs xen/arm: don't try to re-register vcpu_info on cpu_hotplug. xen, cpu_hotplug: call device_offline instead of cpu_down xen/arm: Enable cpu_hotplug.c xenbus: Support multiple grants ring with 64KB xen/grant-table: Add an helper to iterate over a specific number of grants xen/xenbus: Rename *RING_PAGE* to *RING_GRANT* xen/arm: correct comment in enlighten.c xen/gntdev: use types from linux/types.h in userspace headers xen/gntalloc: use types from linux/types.h in userspace headers xen/balloon: Use the correct sizeof when declaring frame_list xen/swiotlb: Add support for 64KB page granularity xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb arm/xen: Add support for 64KB page granularity xen/privcmd: Add support for Linux 64KB page granularity net/xen-netback: Make it running on 64KB page granularity net/xen-netfront: Make it running on 64KB page granularity block/xen-blkback: Make it running on 64KB page granularity block/xen-blkfront: Make it running on 64KB page granularity ...
2015-11-04Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - "genirq: Introduce generic irq migration for cpu hotunplugged" patch merged from tip/irq/for-arm to allow the arm64-specific part to be upstreamed via the arm64 tree - CPU feature detection reworked to cope with heterogeneous systems where CPUs may not have exactly the same features. The features reported by the kernel via internal data structures or ELF_HWCAP are delayed until all the CPUs are up (and before user space starts) - Support for 16KB pages, with the additional bonus of a 36-bit VA space, though the latter only depending on EXPERT - Implement native {relaxed, acquire, release} atomics for arm64 - New ASID allocation algorithm which avoids IPI on roll-over, together with TLB invalidation optimisations (using local vs global where feasible) - KASan support for arm64 - EFI_STUB clean-up and isolation for the kernel proper (required by KASan) - copy_{to,from,in}_user optimisations (sharing the memcpy template) - perf: moving arm64 to the arm32/64 shared PMU framework - L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware - Support for the contiguous PTE hint on kernel mapping (16 consecutive entries may be able to use a single TLB entry) - Generic CONFIG_HZ now used on arm64 - defconfig updates * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits) arm64/efi: fix libstub build under CONFIG_MODVERSIONS ARM64: Enable multi-core scheduler support by default arm64/efi: move arm64 specific stub C code to libstub arm64: page-align sections for DEBUG_RODATA arm64: Fix build with CONFIG_ZONE_DMA=n arm64: Fix compat register mappings arm64: Increase the max granular size arm64: remove bogus TASK_SIZE_64 check arm64: make Timer Interrupt Frequency selectable arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED arm64: cachetype: fix definitions of ICACHEF_* flags arm64: cpufeature: declare enable_cpu_capabilities as static genirq: Make the cpuhotplug migration code less noisy arm64: Constify hwcap name string arrays arm64/kvm: Make use of the system wide safe values arm64/debug: Make use of the system wide safe value arm64: Move FP/ASIMD hwcap handling to common code arm64/HWCAP: Use system wide safe values arm64/capabilities: Make use of system wide safe value arm64: Delay cpu feature capability checks ...
2015-11-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
2015-11-04Merge branch 'parisc-4.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The most important change is that we reduce L1_CACHE_BYTES to 16 bytes, for which a trivial patch for XPS in the network layer was needed. Then we wire up the sys_membarrier and userfaultfd syscalls and added two other small cleanups" * 'parisc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Change L1_CACHE_BYTES to 16 net/xps: Fix calculation of initial number of xps queues parisc: reduce syslog debug output parisc: serial/mux: Convert to uart_console_device instead of open-coded parisc: Wire up userfaultfd syscall parisc: allocate sys_membarrier system call number
2015-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
2015-11-04Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for cipher output IVs in testmgr - Add missing crypto_ahash_blocksize helper - Mark authenc and des ciphers as not allowed under FIPS. Algorithms: - Add CRC support to 842 compression - Add keywrap algorithm - A number of changes to the akcipher interface: + Separate functions for setting public/private keys. + Use SG lists. Drivers: - Add Intel SHA Extension optimised SHA1 and SHA256 - Use dma_map_sg instead of custom functions in crypto drivers - Add support for STM32 RNG - Add support for ST RNG - Add Device Tree support to exynos RNG driver - Add support for mxs-dcp crypto device on MX6SL - Add xts(aes) support to caam - Add ctr(aes) and xts(aes) support to qat - A large set of fixes from Russell King for the marvell/cesa driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits) crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params() crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used hwrng: exynos - Add Device Tree support hwrng: exynos - Fix missing configuration after suspend to RAM hwrng: exynos - Add timeout for waiting on init done dt-bindings: rng: Describe Exynos4 PRNG bindings crypto: marvell/cesa - use __le32 for hardware descriptors crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op() crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio() crypto: marvell/cesa - use gfp_t for gfp flags crypto: marvell/cesa - use dma_addr_t for cur_dma crypto: marvell/cesa - use readl_relaxed()/writel_relaxed() crypto: caam - fix indentation of close braces crypto: caam - only export the state we really need to export crypto: caam - fix non-block aligned hash calculation crypto: caam - avoid needlessly saving and restoring caam_hash_ctx crypto: caam - print errno code when hash registration fails crypto: marvell/cesa - fix memory leak crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req() crypto: marvell/cesa - rearrange handling for sw padded hashes ...
2015-11-03Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "Misc updates to the Intel MID and SGI UV platforms" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel-mid: Make intel_mid_ops static arch/x86/intel-mid: Use kmemdup rather than duplicating its implementation x86/platform/uv: Implement simple dump failover if kdump fails x86/platform/uv: Insert per_cpu accessor function on uv_hub_nmi
2015-11-03Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "The main changes are: continued PAT work by Toshi Kani, plus a new boot time warning about insecure RWX kernel mappings, by Stephen Smalley. The new CONFIG_DEBUG_WX=y warning is marked default-y if CONFIG_DEBUG_RODATA=y is already eanbled, as a special exception, as these bugs are hard to notice and this check already found several live bugs" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Warn on W^X mappings x86/mm: Fix no-change case in try_preserve_large_page() x86/mm: Fix __split_large_page() to handle large PAT bit x86/mm: Fix try_preserve_large_page() to handle large PAT bit x86/mm: Fix gup_huge_p?d() to handle large PAT bit x86/mm: Fix slow_virt_to_phys() to handle large PAT bit x86/mm: Fix page table dump to show PAT bit x86/asm: Add pud_pgprot() and pmd_pgprot() x86/asm: Fix pud/pmd interfaces to handle large PAT bit x86/asm: Add pud/pmd mask interfaces to handle large PAT bit x86/asm: Move PUD_PAGE macros to page_types.h x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
2015-11-03Merge branch 'x86-headers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 sigcontext header cleanups from Ingo Molnar: "This series reorganizes and cleans up various aspects of the main sigcontext UAPI headers, such as unifying the data structures and updating/adding lots of comments to explain all the ABI details and quirks. The headers can now also be built in user-space standalone" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/headers: Clean up too long lines x86/headers: Remove <asm/sigcontext.h> references on the kernel side x86/headers: Remove direct sigcontext32.h uses x86/headers: Convert sigcontext_ia32 uses to sigcontext_32 x86/headers: Unify 'struct sigcontext_ia32' and 'struct sigcontext_32' x86/headers: Make sigcontext pointers bit independent x86/headers: Move the 'struct sigcontext' definitions into the UAPI header x86/headers: Clean up the kernel's struct sigcontext types to be ABI-clean x86/headers: Convert uses of _fpstate_ia32 to _fpstate_32 x86/headers: Unify 'struct _fpstate_ia32' and i386 struct _fpstate x86/headers: Unify register type definitions between 32-bit compat and i386 x86/headers: Use ABI types consistently in sigcontext*.h x86/headers: Separate out legacy user-space structure definitions x86/headers: Clean up and better document uapi/asm/sigcontext.h x86/headers: Clean up uapi/asm/sigcontext32.h x86/headers: Fix (old) header file dependency bug in uapi/asm/sigcontext32.h
2015-11-03Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu changes from Ingo Molnar: "There are two main areas of changes: - Rework of the extended FPU state code to robustify the kernel's usage of cpuid provided xstate sizes - and related changes (Dave Hansen)" - math emulation enhancements: new modern FPU instructions support, with testcases, plus cleanups (Denys Vlasnko)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/fpu: Fixup uninitialized feature_name warning x86/fpu/math-emu: Add support for FISTTP instructions x86/fpu/math-emu, selftests: Add test for FISTTP instructions x86/fpu/math-emu: Add support for FCMOVcc insns x86/fpu/math-emu: Add support for F[U]COMI[P] insns x86/fpu/math-emu: Remove define layer for undocumented opcodes x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns x86/fpu/math-emu: Remove !NO_UNDOC_CODE x86/fpu: Check CPU-provided sizes against struct declarations x86/fpu: Check to ensure increasing-offset xstate offsets x86/fpu: Correct and check XSAVE xstate size calculations x86/fpu: Add C structures for AVX-512 state components x86/fpu: Rework YMM definition x86/fpu/mpx: Rework MPX 'xstate' types x86/fpu: Add xfeature_enabled() helper instead of test_bit() x86/fpu: Remove 'xfeature_nr' x86/fpu: Rework XSTATE_* macros to remove magic '2' x86/fpu: Rename XFEATURES_NR_MAX x86/fpu: Rename XSAVE macros x86/fpu: Remove partial LWP support definitions ...
2015-11-03Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kgdb fixlet from Ingo Molnar: "A single debugging related commit: compress the memory usage of a kgdb data structure" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kgdb: Replace bool_int_array[NR_CPUS] with bitmap
2015-11-03Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu changes from Ingo Molnar: "Two changes in this cycle: a Kconfig help text enhancement, and an AMD CLZERO instruction capability detection and enumeration" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add CLZERO detection x86/Kconfig/cpus: Fix/complete CPU type help texts
2015-11-03Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "An early_printk cleanup plus deinlining enhancements" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/early_printk: Set __iomem address space for IO x86/signal: Deinline get_sigframe, save 240 bytes x86: Deinline early_console_register, save 403 bytes x86/e820: Deinline e820_type_to_string, save 126 bytes
2015-11-03Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot cleanup from Ingo Molnar: "A single commit: remove an obsolete kcrash boot flag" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Remove obsolete 'in_crash_kexec' flag
2015-11-03Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm changes from Ingo Molnar: "The main change in this cycle is another step in the big x86 system call interface rework by Andy Lutomirski, which moves most of the low level x86 entry code from assembly to C, for all syscall entries except native 64-bit system calls: arch/x86/entry/entry_32.S | 182 ++++------ arch/x86/entry/entry_64_compat.S | 547 ++++++++----------------------- 194 insertions(+), 535 deletions(-) ... our hope is that the final remaining step (converting native 64-bit system calls) will be less painful as all the previous steps, given that most of the legacies and quirks are concentrated around native 32-bit and compat environments" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on um/x86: Fix build after x86 syscall changes x86/asm: Remove the xyz_cfi macros from dwarf2.h selftests/x86: Style fixes for the 'unwind_vdso' test x86/entry/64/compat: Document sysenter_fix_flags's reason for existence x86/entry: Split and inline syscall_return_slowpath() x86/entry: Split and inline prepare_exit_to_usermode() x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY x86/entry: Micro-optimize compat fast syscall arg fetch x86/entry: Force inlining of 32-bit syscall code x86/entry: Make irqs_disabled checks in exit code depend on lockdep x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls x86/asm: Remove thread_info.sysenter_return x86/entry/32: Re-implement SYSENTER using the new C path x86/entry/32: Switch INT80 to the new C syscall path x86/entry/32: Open-code return tracking from fork and kthreads x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace ...
2015-11-03Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic changes from Ingo Molnar: "The main changes in this cycle were: - Numachip updates: new hardware support, fixes and cleanups. (Daniel J Blueman) - misc smaller cleanups and fixlets" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/io_apic: Make eoi_ioapic_pin() static x86/irq: Drop unlikely before IS_ERR_OR_NULL x86/x2apic: Make stub functions available even if !CONFIG_X86_LOCAL_APIC x86/apic: Deinline various functions x86/numachip: Fix timer build conflict x86/numachip: Introduce Numachip2 timer mechanisms x86/numachip: Add Numachip IPI optimisations x86/numachip: Add Numachip2 APIC support x86/numachip: Cleanup Numachip support
2015-11-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this cycle were: - sched/fair load tracking fixes and cleanups (Byungchul Park) - Make load tracking frequency scale invariant (Dietmar Eggemann) - sched/deadline updates (Juri Lelli) - stop machine fixes, cleanups and enhancements for bugs triggered by CPU hotplug stress testing (Oleg Nesterov) - scheduler preemption code rework: remove PREEMPT_ACTIVE and related cleanups (Peter Zijlstra) - Rework the sched_info::run_delay code to fix races (Peter Zijlstra) - Optimize per entity utilization tracking (Peter Zijlstra) - ... misc other fixes, cleanups and smaller updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop() sched: Start stopper early stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark() stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark() stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works() stop_machine: Ensure that a queued callback will be called before cpu_stop_park() sched/x86: Fix typo in __switch_to() comments sched/core: Remove a parameter in the migrate_task_rq() function sched/core: Drop unlikely behind BUG_ON() sched/core: Fix task and run queue sched_info::run_delay inconsistencies sched/numa: Fix task_tick_fair() from disabling numa_balancing sched/core: Add preempt_count invariant check sched/core: More notrace annotations sched/core: Kill PREEMPT_ACTIVE sched/core, sched/x86: Kill thread_info::saved_preempt_count sched/core: Simplify preempt_count tests sched/core: Robustify preemption leak checks sched/core: Stop setting PREEMPT_ACTIVE ...
2015-11-03Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS changes from Ingo Molnar: "The main system reliability related changes were from x86, but also some generic RAS changes: - AMD MCE error injection subsystem enhancements. (Aravind Gopalakrishnan) - Fix MCE and CPU hotplug interaction bug. (Ashok Raj) - kcrash bootup robustness fix. (Baoquan He) - kcrash cleanups. (Borislav Petkov) - x86 microcode driver rework: simplify it by unmodularizing it and other cleanups. (Borislav Petkov)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init() x86/mce: Add a Scalable MCA vendor flags bit MAINTAINERS: Unify the microcode driver section x86/microcode/intel: Move #ifdef DEBUG inside the function x86/microcode/amd: Remove maintainers from comments x86/microcode: Remove modularization leftovers x86/microcode: Merge the early microcode loader x86/microcode: Unmodularize the microcode driver x86/mce: Fix thermal throttling reporting after kexec kexec/crash: Say which char is the unrecognized x86/setup/crash: Check memblock_reserve() retval x86/setup/crash: Cleanup some more x86/setup/crash: Remove alignment variable x86/setup: Cleanup crashkernel reservation functions x86/amd_nb, EDAC: Rename amd_get_node_id() x86/setup: Do not reserve crashkernel high memory if low reservation failed x86/microcode/amd: Do not overwrite final patch levels x86/microcode/amd: Extract current patch level read to a function x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts ...
2015-11-03Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Improve accuracy of perf/sched clock on x86. (Adrian Hunter) - Intel DS and BTS updates. (Alexander Shishkin) - Intel cstate PMU support. (Kan Liang) - Add group read support to perf_event_read(). (Peter Zijlstra) - Branch call hardware sampling support, implemented on x86 and PowerPC. (Stephane Eranian) - Event groups transactional interface enhancements. (Sukadev Bhattiprolu) - Enable proper x86/intel/uncore PMU support on multi-segment PCI systems. (Taku Izumi) - ... misc fixes and cleanups. The perf tooling team was very busy again with 200+ commits, the full diff doesn't fit into lkml size limits. Here's an (incomplete) list of the tooling highlights: New features: - Change the default event used in all tools (record/top): use the most precise "cycles" hw counter available, i.e. when the user doesn't specify any event, it will try using cycles:ppp, cycles:pp, etc and fall back transparently until it finds a working counter. (Arnaldo Carvalho de Melo) - Integration of perf with eBPF that, given an eBPF .c source file (or .o file built for the 'bpf' target with clang), will get it automatically built, validated and loaded into the kernel via the sys_bpf syscall, which can then be used and seen using 'perf trace' and other tools. (Wang Nan) Various user interface improvements: - Automatic pager invocation on long help output. (Namhyung Kim) - Search for more options when passing args to -h, e.g.: (Arnaldo Carvalho de Melo) $ perf report -h interface Usage: perf report [<options>] --gtk Use the GTK2 interface --stdio Use the stdio interface --tui Use the TUI interface - Show ordered command line options when -h is used or when an unknown option is specified. (Arnaldo Carvalho de Melo) - If options are passed after -h, show just its descriptions, not all options. (Arnaldo Carvalho de Melo) - Implement column based horizontal scrolling in the hists browser (top, report), making it possible to use the TUI for things like 'perf mem report' where there are many more columns than can fit in a terminal. (Arnaldo Carvalho de Melo) - Enhance the error reporting of tracepoint event parsing, e.g.: $ oldperf record -e sched:sched_switc usleep 1 event syntax error: 'sched:sched_switc' \___ unknown tracepoint Run 'perf list' for a list of valid events Now we get the much nicer: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ can't access trace events Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' And after we have those mount point permissions fixed: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. I.e. basically now the event parsing routing uses the strerror_open() routines introduced by and used in 'perf trace' work. (Jiri Olsa) - Fail properly when pattern matching fails to find a tracepoint, i.e. '-e non:existent' was being correctly handled, with a proper error message about that not being a valid event, but '-e non:existent*' wasn't, fix it. (Jiri Olsa) - Do event name substring search as last resort in 'perf list'. (Arnaldo Carvalho de Melo) E.g.: # perf list clock List of pre-defined events (to be used in -e): cpu-clock [Software event] task-clock [Software event] uncore_cbox_0/clockticks/ [Kernel PMU event] uncore_cbox_1/clockticks/ [Kernel PMU event] kvm:kvm_pvclock_update [Tracepoint event] kvm:kvm_update_master_clock [Tracepoint event] power:clock_disable [Tracepoint event] power:clock_enable [Tracepoint event] power:clock_set_rate [Tracepoint event] syscalls:sys_enter_clock_adjtime [Tracepoint event] syscalls:sys_enter_clock_getres [Tracepoint event] syscalls:sys_enter_clock_gettime [Tracepoint event] syscalls:sys_enter_clock_nanosleep [Tracepoint event] syscalls:sys_enter_clock_settime [Tracepoint event] syscalls:sys_exit_clock_adjtime [Tracepoint event] syscalls:sys_exit_clock_getres [Tracepoint event] syscalls:sys_exit_clock_gettime [Tracepoint event] syscalls:sys_exit_clock_nanosleep [Tracepoint event] syscalls:sys_exit_clock_settime [Tracepoint event] Intel PT hardware tracing enhancements: - Accept a zero --itrace period, meaning "as often as possible". In the case of Intel PT that is the same as a period of 1 and a unit of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter) - Harmonize itrace's synthesized callchains with the existing --max-stack tool option. (Adrian Hunter) - Allow time to be displayed in nanoseconds in 'perf script'. (Adrian Hunter) - Fix potential infinite loop when handling Intel PT timestamps. (Adrian Hunter) - Slighly improve Intel PT debug logging. (Adrian Hunter) - Warn when AUX data has been lost, just like when processing PERF_RECORD_LOST. (Adrian Hunter) - Further document export-to-postgresql.py script. (Adrian Hunter) - Add option to synthesize branch stack from auxtrace data. (Adrian Hunter) Misc notable changes: - Switch the default callchain output mode to 'graph,0.5,caller', to make it look like the default for other tools, reducing the learning curve for people used to 'caller' based viewing. (Arnaldo Carvalho de Melo) - various call chain usability enhancements. (Namhyung Kim) - Introduce the 'P' event modifier, meaning 'max precision level, please', i.e.: $ perf record -e cycles:P usleep 1 Is now similar to: $ perf record usleep 1 Useful, for instance, when specifying multiple events. (Jiri Olsa) - Add 'socket' sort entry, to sort by the processor socket in 'perf top' and 'perf report'. (Kan Liang) - Introduce --socket-filter to 'perf report', for filtering by processor socket. (Kan Liang) - Add new "Zoom into Processor Socket" operation in the perf hists browser, used in 'perf top' and 'perf report'. (Kan Liang) - Allow probing on kmodules without DWARF. (Masami Hiramatsu) - Fix 'perf probe -l' for probes added to kernel module functions. (Masami Hiramatsu) - Preparatory work for the 'perf stat record' feature that will allow generating perf.data files with counting data in addition to the sampling mode we have now (Jiri Olsa) - Update libtraceevent KVM plugin. (Paolo Bonzini) - ... plus lots of other enhancements that I failed to list properly, by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda, Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim, Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang Nan, Yang Shi and Yunlong Song" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits) perf unwind: Pass symbol source to libunwind tools build: Fix libiberty feature detection perf tools: Compile scriptlets to BPF objects when passing '.c' to --event perf record: Add clang options for compiling BPF scripts perf bpf: Attach eBPF filter to perf event perf tools: Make sure fixdep is built before libbpf perf script: Enable printing of branch stack perf trace: Add cmd string table to decode sys_bpf first arg perf bpf: Collect perf_evsel in BPF object files perf tools: Load eBPF object into kernel perf tools: Create probe points for BPF programs perf tools: Enable passing bpf object file to --event perf ebpf: Add the libbpf glue perf tools: Make perf depend on libbpf perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore perf tools: Enable pre-event inherit setting by config terms perf symbols: we can now read separate debug-info files based on a build ID perf symbols: Fix type error when reading a build-id perf tools: Search for more options when passing args to -h perf stat: Cache aggregated map entries in extra cpumap ...
2015-11-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking changes from Ingo Molnar: "The main changes in this cycle were: - More gradual enhancements to atomic ops: new atomic*_read_ctrl() ops, synchronize atomic_{read,set}() ordering requirements between architectures, add atomic_long_t bitops. (Peter Zijlstra) - Add _{relaxed|acquire|release}() variants for inc/dec atomics and use them in various locking primitives: mutex, rtmutex, mcs, rwsem. This enables weakly ordered architectures (such as arm64) to make use of more locking related optimizations. (Davidlohr Bueso) - Implement atomic[64]_{inc,dec}_relaxed() on ARM. (Will Deacon) - Futex kernel data cache footprint micro-optimization. (Rasmus Villemoes) - pvqspinlock runtime overhead micro-optimization. (Waiman Long) - misc smaller fixlets" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM, locking/atomics: Implement _relaxed variants of atomic[64]_{inc,dec} locking/rwsem: Use acquire/release semantics locking/mcs: Use acquire/release semantics locking/rtmutex: Use acquire/release semantics locking/mutex: Use acquire/release semantics locking/asm-generic: Add _{relaxed|acquire|release}() variants for inc/dec atomics atomic: Implement atomic_read_ctrl() atomic, arch: Audit atomic_{read,set}() atomic: Add atomic_long_t bitops futex: Force hot variables into a single cache line locking/pvqspinlock: Kick the PV CPU unconditionally when _Q_SLOW_VAL locking/osq: Relax atomic semantics locking/qrwlock: Rename ->lock to ->wait_lock locking/Documentation/lockstat: Fix typo - lokcing -> locking locking/atomics, cmpxchg: Privatize the inclusion of asm/cmpxchg.h
2015-11-03Merge branch 'core-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI changes from Ingo Molnar: "The main changes in this cycle were: - further EFI code generalization to make it more workable for ARM64 - various extensions, such as 64-bit framebuffer address support, UEFI v2.5 EFI_PROPERTIES_TABLE support - code modularization simplifications and cleanups - new debugging parameters - various fixes and smaller additions" * 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) efi: Fix warning of int-to-pointer-cast on x86 32-bit builds efi: Use correct type for struct efi_memory_map::phys_map x86/efi: Fix kernel panic when CONFIG_DEBUG_VIRTUAL is enabled efi: Add "efi_fake_mem" boot option x86/efi: Rename print_efi_memmap() to efi_print_memmap() efi: Auto-load the efi-pstore module efi: Introduce EFI_NX_PE_DATA bit and set it from properties table efi: Add support for UEFIv2.5 Properties table efi: Add EFI_MEMORY_MORE_RELIABLE support to efi_md_typeattr_format() efifb: Add support for 64-bit frame buffer addresses efi/arm64: Clean up efi_get_fdt_params() interface arm64: Use core efi=debug instead of uefi_debug command line parameter efi/x86: Move efi=debug option parsing to core drivers/firmware: Make efi/esrt.c driver explicitly non-modular efi: Use the generic efi.memmap instead of 'memmap' acpi/apei: Use appropriate pgprot_t to map GHES memory arm64, acpi/apei: Implement arch_apei_get_mem_attributes() arm64/mm: Add PROT_DEVICE_nGnRnE and PROT_NORMAL_WT acpi, x86: Implement arch_apei_get_mem_attributes() efi, x86: Rearrange efi_mem_attributes() ...
2015-11-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
2015-11-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement provides: - More y2038 work in the area of ntp and pps. - Optimization of posix cpu timers - New time related selftests - Some new clocksource drivers - The usual pile of fixes, cleanups and improvements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) timeconst: Update path in comment timers/x86/hpet: Type adjustments clocksource/drivers/armada-370-xp: Implement ARM delay timer clocksource/drivers/tango_xtal: Add new timer for Tango SoCs clocksource/drivers/imx: Allow timer irq affinity change clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr() clocksource/drivers/h8300_*: Remove unneeded memset()s clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup() clocksource/drivers/em_sti: Remove unneeded memset()s clocksource/drivers/mediatek: Use GPT as sched clock source clockevents/drivers/mtk: Fix spurious interrupt leading to crash posix_cpu_timer: Reduce unnecessary sighand lock contention posix_cpu_timer: Convert cputimer->running to bool posix_cpu_timer: Check thread timers only when there are active thread timers posix_cpu_timer: Optimize fastpath_timer_check() timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments timers: Use __fls in apply_slack() clocksource: Remove return statement from void functions net: sfc: avoid using timespec ntp/pps: use y2038 safe types in pps_event_time ...
2015-11-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "In this ARM merge, we remove more lines than we add. Changes include: - Enable imprecise aborts early, so that bus errors aren't masked until later in the boot. This has the side effect that boot loaders which provoke these aborts can cause the kernel to crash early in boot, so we install a handler to report this event around the site where these are enabled. - Remove the buggy but impossible to enable cmpxchg syscall code. - Add unwinding annotations to some assembly code. - Add support for atomic half-word exchange for ARMv6k+. - Reduce ioremap() alignment for SMP/LPAE cases where we don't need the large alignment. - Addition of an "optimal" 3G configuration for systems with 1G of RAM. - Increase vmalloc space by 128M. - Constify some SMP operations structures, which have never been writable. - Improve ARMs dma_mmap() support for mapping DMA coherent mappings into userspace. - Fix to the NMI backtrace code in the IPI case on ARM where the failing CPU gets stuck for 10s waiting for its own IPI to be delivered. - Removal of legacy PM support from the AMBA bus driver. - Another fix for the previous fix of vdsomunge" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (23 commits) ARM: 8449/1: fix bug in vdsomunge swab32 macro arm: add missing of_node_put ARM: 8447/1: catch pending imprecise abort on unmask ARM: 8446/1: amba: Remove unused callbacks for legacy system PM ARM: 8443/1: Adding support for atomic half word exchange ARM: clean up TWD after previous patch ARM: 8441/2: twd: Don't set CLOCK_EVT_FEAT_C3STOP unconditionally ARM: 8440/1: remove obsolete documentation ARM: make highpte an expert option ARM: 8433/1: add a VMSPLIT_3G_OPT config option ARM: 8439/1: Fix backtrace generation when IPI is masked ARM: 8428/1: kgdb: Fix registers on sleeping tasks ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap() ARM: 8426/1: dma-mapping: add missing range check in dma_mmap() ARM: remove user cmpxchg syscall ARM: 8438/1: Add unwinding to __clear_user_std() ARM: 8436/1: hw_breakpoint: remove unnecessary header ARM: 8434/2: Revert "7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp" ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000 ARM: 8430/1: use default ioremap alignment for SMP or LPAE ...
2015-11-03Merge tag 'arc-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Support for new MM features in ARCv2 cores (THP, PAE40) Some generic THP bits are touched - all ACKed by Kirill - Platform framework updates to prepare for EZChip arrival (still in works) - ARC Public Mailing list setup finally (linux-snps-arc@lists.infraded.org) * tag 'arc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (42 commits) ARC: mm: PAE40 support ARC: mm: PAE40: tlbex.S: Explicitify the size of pte_t ARC: mm: PAE40: switch to using phys_addr_t for physical addresses ARC: mm: HIGHMEM: populate high memory from DT ARC: mm: HIGHMEM: kmap API implementation ARC: mm: preps ahead of HIGHMEM support #2 ARC: mm: preps ahead of HIGHMEM support ARC: mm: use generic macros _BITUL()/_AC() ARC: mm: Improve Duplicate PD Fault handler MAINTAINERS: Add public mailing list for ARC ARC: Ensure DT mem base is same as what kernel is built with ARC: boot: Non Master cpus only need to call EARLY_CPU_SETUP once ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_smp() ARC: smp: Introduce smp hook @init_irq_cpu called for all cores ARC: smp: Rename platform hook @init_smp -> @init_cpu_smp ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_early_smp() ARC: smp: Introduce smp hook @init_early_smp for Master core ARC: remove @init_time, @init_irq platform callbacks ARC: smp: irqchip: handle IPI as percpu irq like timer ARC: boot: Support Halt-on-reset and Run-on-reset SMP booting modes ...
2015-11-03Merge tag 'cris-for-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull CRIS changes from Jesper Nilsson: "Mostly another batch of code removal due to move to standard frameworks for CRISv32, initial devicetree configuration for a couple of boards, and some small fixes for kgdb and time handling" * tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: Drop reference to get_cmos_time() CRIS: Drop code related to obsolete or unused kconfigs cris: time: Cleanup of persistent clock stuff cris: re-use helpers to dump data in hex format CRIS v32: remove old GPIO and LEDs code CRIS v32: remove I2C bitbanging driver CRIS v32: add ARTPEC-3 and P1343 device trees CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor CRIS: add dt-bindings symlink CRIS v32: increase NR_IRQS cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkp cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12 cris: kgdb: use native hex2bin
2015-11-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull avr32 update from Hans-Christian Noren Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: atngw100: remove useless include
2015-11-03Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/sun3: Use %pM format specifier to print ethernet address
2015-11-03Merge tag 'leds_for_4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Move the out-of-LED-tree led-sead3 driver to the LED subsystem. - Add 'invert' sysfs attribute to the heartbeat trigger. - Add Device Tree support to the leds-netxbig driver and add related DT nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files. Remove static LED setup from the related board files. - Remove redundant brightness conversion operation from leds-netxbig. - Improve leds-bcm6328 driver: improve default-state handling, add more init configuration options, print invalid LED instead of warning only about maximum LED value. - Add a shutdown function for setting gpio-leds into off state when shutting down. - Fix DT flash timeout property naming in leds-aat1290.txt. - Switch to using devm prefixed version of led_classdev_register() (leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro, leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap). - Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328, leds-88pm860x). - Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro. * tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits) leds: 88pm860x: add missing of_node_put leds: bcm6328: add missing of_node_put leds: bcm6358: add missing of_node_put powerpc/powernv: add missing of_node_put leds: leds-wrap.c: Use devm_led_classdev_register leds: aat1290: Fix property naming of flash-timeout-us leds: leds-net48xx: Use devm_led_classdev_register leds: leds-menf21bmc.c: Use devm_led_class_register leds: leds-locomo.c: Use devm_led_classdev_register leds: leds-gpio: add shutdown function Documentation: leds: update DT bindings for leds-bcm6328 leds-bcm6328: add more init configuration options leds-bcm6328: simplify and improve default-state handling leds-bcm6328: print invalid LED leds: netxbig: set led_classdev max_brightness leds: netxbig: convert to use the devm_ functions ARM: mvebu: remove static LED setup for netxbig boards ARM: Kirkwood: add LED DT entries for netxbig boards leds: netxbig: add device tree binding leds: triggers: add invert to heartbeat ...
2015-11-03s390: remove runtime instrumentation interruptsMartin Schwidefsky
The external interrupts for runtime instrumentation buffer-full and runtime instrumentation halted are unused and have no current user. Remove the support and ignore the second parameter of the s390_runtime_instr system call from now on. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/Kconfig: use builtin bswapChristian Borntraeger
Depending on the gcc version we can use builtin_bswap instead of architecture functions. Doing so is better than the inline assembly version of load reverse for two reasons: - the sequence of load reversed, apply constant mask, save reversed can be optimized to load, apply reversed mask, save - builtins are slightly better to optimize e.g. gcc instruction scheduler cannot optimize grouping on inline assemblies. To enable set we have to ARCH_USE_BUILTIN_BSWAP. bloat-o-meter results: add/remove: 1/1 grow/shrink: 75/533 up/down: 1711/-9394 (-7683) Suggested-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/kernel: fix ptrace peek/poke for floating point registersMartin Schwidefsky
git commit 155e839a814834a3b4b31e729f4716e59d3d2dd4 "s390/kernel: dynamically allocate FP register save area" introduced a regression in regard to ptrace. If the vector register extension is not present or unused the ptrace peek of a floating pointer register return incorrect data and the ptrace poke to a floating pointer register overwrites the task structure starting at task->thread.fpu.fprs. Cc: stable@kernel.org # v4.3 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03ARM: mvebu: remove static LED setup for netxbig boardsSimon Guinot
Since DT support is now available for the LEDs found on the LaCie netxbig boards (Kirkwood-based), then the old-fashion netxbig board setup file is no longer needed. This patch removes this file. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03ARM: Kirkwood: add LED DT entries for netxbig boardsSimon Guinot
This patch adds DT entries for the LEDs found on the Kirkwood-based LaCie boards 2Big and 5Big Network v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03LED/MIPS: Move SEAD3 LED driver to where it belongs.Ralf Baechle
Fixes the following randconfig problem leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister' leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03avr32: atngw100: remove useless includeAlexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2015-11-02Merge tag 'pinctrl-v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.4 kernel development cycle. Development pace is high in pin control again this merge window. 28 contributors, 83 patches. It hits a few sites outside the pin control subsystem: - Device tree bindings in Documentation (as usual) - MAINTAINERS - drivers/base/* for the "init" state handling by Doug Anderson. This has been ACKed by Greg. - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change in the USB subsystem. This has been ACKed by both Greg and Felipe. - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone through the ARM SoC tree but ended up here. This time I am using Geert Uytterhoeven as submaintainer for SH PFC since the are three-four people working in parallel with new Renesas ASICs. Summary of changes: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes" * tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits) pinctrl: pinconf: remove needless loop pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER pinctrl: zynq: fix UTF-8 errors pinctrl: zynq: Initialize early pinctrl: at91: add missing of_node_put pinctrl: tegra-xusb: Correct lane mux options pinctrl: intel: Add Intel Broxton pin controller support pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt drivers/pinctrl: Add the concept of an "init" state pinctrl: uniphier: set input-enable before pin-muxing pinctrl: cygnus: Add new compatible string for gpio controller driver pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver pinctrl: cygnus: Optional DT property to support pin mappings pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h> usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h> ...
2015-11-02Merge tag 'edac_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "A bunch of fixes all over the place and some hw enablement this time. - Convert EDAC to debugfs wrappers and make drivers use those (Borislav Petkov) - L3 and SoC support for xgene_edac (Loc Ho) - AMD F15h, models 0x60-6f support to amd64_edac (Aravind Gopalakrishnan) - Fixes and cleanups all over the place" * tag 'edac_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) EDAC: Fix PAGES_TO_MiB macro misuse EDAC, altera: SoCFPGA EDAC should not look for ECC_CORR_EN EDAC: Use edac_debugfs_remove_recursive() EDAC, ppc4xx_edac: Fix module autoload for OF platform driver Documentation/EDAC: Add reference documents section for amd64_edac EDAC, amd64_edac: Update copyright and remove changelog EDAC, amd64_edac: Extend scrub rate support to F15hM60h EDAC: Don't allow empty DIMM labels EDAC: Fix sysfs dimm_label store operation EDAC: Fix sysfs dimm_label show operation arm64, EDAC: Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node EDAC, xgene: Add SoC support EDAC, xgene: Fix possible sprintf() overflow issue EDAC, xgene: Add L3 support EDAC, Documentation: Update X-Gene EDAC binding for L3/SoC subnodes EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs() EDAC, ghes_edac: Remove redundant memory_type array EDAC, xgene: Convert to debugfs wrappers EDAC, i5100: Convert to debugfs wrappers EDAC, altera: Convert to debugfs wrappers ...
2015-11-02Merge tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc() - Add new ioctl to allow userspace to send multi commands - Wait for card busy signalling before starting SDIO requests - Remove MMC_CLKGATE - Enable tuning for DDR50 mode - Some code clean-up/improvements to mmc pwrseq - Use highest priority for eMMC restart handler - Add DT bindings for eMMC hardware reset support - Extend the mmc_send_tuning() API - Improve ios show for debugfs - A couple of code optimizations MMC host: - Some generic OF improvements - Various code clean-ups - sirf: Add support for DDR50 - sunxi: Add support for card busy detection - mediatek: Use MMC_CAP_RUNTIME_RESUME - mediatek: Add support for eMMC HW-reset - mediatek: Add support for HS400 - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API - dw_mmc: Add external DMA interface support - dw_mmc: Some various improvements - dw_mmc-rockchip: MMC tuning with the clock phase framework - sdhci: Properly clear IRQs during resume - sdhci: Enable tuning for DDR50 mode - sdhci-of-esdhc: Use IRQ mode for card detection - sdhci-of-esdhc: Support both BE and LE host controller - sdhci-pci: Build o2micro support in the same module - sdhci-pci: Support for new Intel host controllers - sdhci-acpi: Support for new Intel host controllers" * tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits) mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register mmc: dw_mmc: NULL dereference in error message mmc: pwrseq: Use highest priority for eMMC restart handler mmc: mediatek: add HS400 support mmc: mmc: extend the mmc_send_tuning() mmc: mediatek: add implement of ops->hw_reset() mmc: mediatek: fix got GPD checksum error interrupt when data transfer mmc: mediatek: change the argument "ddr" to "timing" mmc: mediatek: make cmd_ints_mask to const mmc: dt-bindings: update Mediatek MMC bindings mmc: core: Add DT bindings for eMMC hardware reset support mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2 mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers mmc: sdhci-pci: Add more PCI IDs for Intel controllers arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC ...
2015-11-02cris: Drop reference to get_cmos_time()Guenter Roeck
Function get_cmos_time() was removed with commit 657926a83df9 ("cris: time: Cleanup of persistent clock stuff"). The remaining reference to it may cause the following build error. arch/cris/kernel/built-in.o:(___ksymtab+get_cmos_time+0x0): undefined reference to `get_cmos_time' Makefile:946: recipe for target 'vmlinux' failed Fixes: 657926a83df9 ("cris: time: Cleanup of persistent clock stuff") Cc: Xunlei Pang <pang.xunlei@linaro.org> Cc: Rabin Vincent <rabin@rab.in> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02CRIS: Drop code related to obsolete or unused kconfigsJesper Nilsson
Drop all code related to Kconfigs that don't exist. Fix one Kconfig where it was actually typo:ed (ETRAX_KGB_PORT2) Drop content related to CRIS v32 SoCs from etraxgpio.h headerfile, all use of GPIO for both ETRAX FS and ARTPEC-3 should now be through standard gpiolib instead. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-11-02cris: time: Cleanup of persistent clock stuffXunlei Pang
- Remove update_persistent_clock(), as it does nothing now. - Remove read_persistent_clock(), let it fall back to the weak version. Cc: Mikael Starvik <starvik@axis.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Acked-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-11-02cris: re-use helpers to dump data in hex formatAndy Shevchenko
There are native helpers such as print_hex_byte() and %*ph specifier to dump data in hex format. Re-use them instead of a custom approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>