| Age | Commit message (Collapse) | Author |
|---|
|
Convert all allocations that used a NOTRACK flag to stop using it.
Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kmemcheck: kill kmemcheck", v2.
As discussed at LSF/MM, kill kmemcheck.
KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow). KASan is already upstream.
We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).
The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.
Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.
This patch (of 4):
Remove kmemcheck annotations, and calls to kmemcheck from the kernel.
[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's add wrappers for ->nr_ptes with the same interface as for nr_pmd
and nr_pud.
The patch also makes nr_ptes accounting dependent onto CONFIG_MMU. Page
table accounting doesn't make sense if you don't have page tables.
It's preparation for consolidation of page-table counters in mm_struct.
Link: http://lkml.kernel.org/r/20171006100651.44742-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a machine with 5-level paging support a process can allocate
significant amount of memory and stay unnoticed by oom-killer and memory
cgroup. The trick is to allocate a lot of PUD page tables. We don't
account PUD page tables, only PMD and PTE.
We already addressed the same issue for PMD page tables, see commit
dc6c9a35b66b ("mm: account pmd page tables to the process").
Introduction of 5-level paging brings the same issue for PUD page
tables.
The patch expands accounting to PUD level.
[kirill.shutemov@linux.intel.com: s/pmd_t/pud_t/]
Link: http://lkml.kernel.org/r/20171004074305.x35eh5u7ybbt5kar@black.fi.intel.com
[heiko.carstens@de.ibm.com: s390/mm: fix pud table accounting]
Link: http://lkml.kernel.org/r/20171103090551.18231-1-heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20171002080427.3320-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
empty_bad_page() and empty_bad_pte_table() seem to be relics from old
days which is not used by any code for a long time. I have tried to
find when exactly but this is not really all that straightforward due to
many code movements - traces disappear around 2.4 times.
Anyway no code really references neither empty_bad_page nor
empty_bad_pte_table. We only allocate the storage which is not used by
anybody so remove them.
Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Ralf Baechle <ralf@linus-mips.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN
configuration options. As they are user-selectable and independent,
this allows invalid configurations:
- All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is
not set, causing compiler warnings like:
include/linux/byteorder/big_endian.h:7:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
#warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN
^
- Since commit 5bdfca6435b82944 ("m32r: define CPU_BIG_ENDIAN"),
building an allmodconfig or allyesconfig enables both
CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN.
While this did get rid of the warning above, both options are
obviously mutually exclusive.
Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as
before, and by making sure exactly one of CPU_BIG_ENDIAN and
CPU_LITTLE_ENDIAN is always enabled.
Link: http://lkml.kernel.org/r/1509361505-18150-1-git-send-email-geert@linux-m68k.org
Fixes: 5bdfca6435b82944 ("m32r: define CPU_BIG_ENDIAN")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"The usual rocket-science from trivial tree for 4.15"
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
MAINTAINERS: relinquish kconfig
MAINTAINERS: Update my email address
treewide: Fix typos in Kconfig
kfifo: Fix comments
init/Kconfig: Fix module signing document location
misc: ibmasm: Return error on error path
HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
MAINTAINERS: Correct path to uDraw PS3 driver
tracing: Fix doc mistakes in trace sample
tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
mm/huge_memory.c: fixup grammar in comment
lib/xz: Add fall-through comments to a switch statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
|
|
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat
a bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
tty: ehv_bytechan: fix spelling mistake
tty: serial: meson: allow baud-rates lower than 9600
serial: 8250_fintek: Fix crash with baud rate B0
serial: 8250_fintek: Disable delays for ports != 0
serial: 8250_fintek: Return -EINVAL on invalid configuration
tty: Remove redundant license text
tty: serdev: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serial: Remove redundant license text
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: jsm: remove redundant pointer ts
tty: serial: jsm: add space before the open parenthesis '('
tty: serial: jsm: fix coding style
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: change the type of local variable
tty: serial: imx: remove dead code imx_dma_rxint
tty: serial: imx: disable ageing timer interrupt if dma in use
serial: 8250: fix potential deadlock in rs485-mode
serial: m32r_sio: Drop redundant .data assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update ACPICA to upstream revision 20170831, fix APEI to use the
fixmap instead of ioremap_page_range(), add an operation region driver
for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI
CPPC driver, fix a few assorted issues and clean up some code.
Specifics:
- Update the ACPICA code to upstream revision 20170831 including
* PDTT table header support (Bob Moore).
* Cleanup and extension of internal string-to-integer conversion
functions (Bob Moore).
* Support for 64-bit hardware accesses (Lv Zheng).
* ACPI PM Timer code adjustment to deal with 64-bit return values
of acpi_hw_read() (Bob Moore).
* Support for deferred table verification in acpiexec (Lv Zheng).
- Fix APEI to use the fixmap instead of ioremap_page_range() which
cannot work correctly the way the code in there attempted to use it
and drop some code that's not necessary any more after that change
(James Morse).
- Clean up the APEI support code and make it use 64-bit timestamps
(Arnd Bergmann, Dongjiu Geng, Jan Beulich).
- Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).
- Add support for PCC subspace IDs to the ACPI CPPC driver (George
Cherian).
- Fix an ACPI EC driver regression related to the handling of EC
events during the "noirq" phases of system suspend/resume (Lv
Zheng).
- Delay the initialization of the lid state in the ACPI button driver
to fix issues appearing on some systems (Hans de Goede).
- Extend the KIOX000A "device always present" quirk to cover all
affected BIOS versions (Hans de Goede).
- Clean up some code in the ACPI core and drivers (Colin Ian King,
Gustavo Silva)"
* tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: Mark expected switch fall-throughs
ACPI / LPSS: Remove redundant initialization of clk
ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file
ACPI / sysfs: Make function param_set_trace_method_name() static
ACPI / button: Delay acpi_lid_initialize_state() until first user space open
ACPI / EC: Fix regression related to triggering source of EC event handling
APEI / ERST: use 64-bit timestamps
ACPI / APEI: Remove arch_apei_flush_tlb_one()
arm64: mm: Remove arch_apei_flush_tlb_one()
ACPI / APEI: Remove ghes_ioremap_area
ACPI / APEI: Replace ioremap_page_range() with fixmap
ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
ACPICA: Update version to 20170831
ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read
ACPICA: String conversions: Update to add new behaviors
ACPICA: String conversions: Cleanup/format comments. No functional changes
ACPICA: Restructure/cleanup all string-to-integer conversion functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
|
|
Even though aperfmperf_snapshot_khz() caches the samples.khz value to
return if called again in a sufficiently short time, its caller,
arch_freq_get_on_cpu(), still uses smp_call_function_single() to run it
which may allow user space to trigger an IPI storm by reading from the
scaling_cur_freq cpufreq sysfs file in a tight loop.
To avoid that, move the decision on whether or not to return the cached
samples.khz value to arch_freq_get_on_cpu().
This change was part of commit 941f5f0f6ef5 ("x86: CPU: Fix up "cpu MHz"
in /proc/cpuinfo"), but it was not the reason for the revert and it
remains applicable.
Fixes: 4815d3c56d1e (cpufreq: x86: Make scaling_cur_freq behave more as expected)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"These updates are related to TSC handling:
- Support platforms which have synchronized TSCs but the boot CPU has
a non zero TSC_ADJUST value, which is considered a firmware bug on
normal systems.
This applies to HPE/SGI UV platforms where the platform firmware
uses TSC_ADJUST to ensure TSC synchronization across a huge number
of sockets, but due to power on timings the boot CPU cannot be
guaranteed to have a zero TSC_ADJUST register value.
- Fix the ordering of udelay calibration and kvmclock_init()
- Cleanup the udelay and calibration code"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Mark cyc2ns_init() and detect_art() __init
x86/platform/UV: Mark tsc_check_sync as an init function
x86/tsc: Make CONFIG_X86_TSC=n build work again
x86/platform/UV: Add check of TSC state set by UV BIOS
x86/tsc: Provide a means to disable TSC ART
x86/tsc: Drastically reduce the number of firmware bug warnings
x86/tsc: Skip TSC test and error messages if already unstable
x86/tsc: Add option that TSC on Socket 0 being non-zero is valid
x86/timers: Move simple_udelay_calibration() past kvmclock_init()
x86/timers: Make recalibrate_cpu_khz() void
x86/timers: Move the simple udelay calibration to tsc.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource updates from Thomas Gleixner:
"This update provides updates to RDT:
- A diagnostic framework for the Resource Director Technology (RDT)
user interface (sysfs). The failure modes of the user interface are
hard to diagnose from the error codes. An extra last command status
file provides now sensible textual information about the failure so
its simpler to use.
- A few minor cleanups and updates in the RDT code"
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix a silent failure when writing zero value schemata
x86/intel_rdt: Fix potential deadlock during resctrl mount
x86/intel_rdt: Fix potential deadlock during resctrl unmount
x86/intel_rdt: Initialize bitmask of shareable resource if CDP enabled
x86/intel_rdt: Remove redundant assignment
x86/intel_rdt/cqm: Make integer rmid_limbo_count static
x86/intel_rdt: Add documentation for "info/last_cmd_status"
x86/intel_rdt: Add diagnostics when making directories
x86/intel_rdt: Add diagnostics when writing the cpus file
x86/intel_rdt: Add diagnostics when writing the tasks file
x86/intel_rdt: Add diagnostics when writing the schemata file
x86/intel_rdt: Add framework for better RDT UI diagnostics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"This update provides a major overhaul of the APIC initialization and
vector allocation code:
- Unification of the APIC and interrupt mode setup which was
scattered all over the place and was hard to follow. This also
distangles the timer setup from the APIC initialization which
brings a clear separation of functionality.
Great detective work from Dou Lyiang!
- Refactoring of the x86 vector allocation mechanism. The existing
code was based on nested loops and rather convoluted APIC callbacks
which had a horrible worst case behaviour and tried to serve all
different use cases in one go. This led to quite odd hacks when
supporting the new managed interupt facility for multiqueue devices
and made it more or less impossible to deal with the vector space
exhaustion which was a major roadblock for server hibernation.
Aside of that the code dealing with cpu hotplug and the system
vectors was disconnected from the actual vector management and
allocation code, which made it hard to follow and maintain.
Utilizing the new bitmap matrix allocator core mechanism, the new
allocator and management code consolidates the handling of system
vectors, legacy vectors, cpu hotplug mechanisms and the actual
allocation which needs to be aware of system and legacy vectors and
hotplug constraints into a single consistent entity.
This has one visible change: The support for multi CPU targets of
interrupts, which is only available on a certain subset of
CPUs/APIC variants has been removed in favour of single interrupt
targets. A proper analysis of the multi CPU target feature revealed
that there is no real advantage as the vast majority of interrupts
end up on the CPU with the lowest APIC id in the set of target CPUs
anyway. That change was agreed on by the relevant folks and allowed
to simplify the implementation significantly and to replace rather
fragile constructs like the vector cleanup IPI with straight
forward and solid code.
Furthermore this allowed to cleanly separate the allocation details
for legacy, normal and managed interrupts:
* Legacy interrupts are not longer wasting 16 vectors
unconditionally
* Managed interrupts have now a guaranteed vector reservation, but
the actual vector assignment happens when the interrupt is
requested. It's guaranteed not to fail.
* Normal interrupts no longer allocate vectors unconditionally
when the interrupt is set up (IO/APIC init or MSI(X) enable).
The mechanism has been switched to a best effort reservation
mode. The actual allocation happens when the interrupt is
requested. Contrary to managed interrupts the request can fail
due to vector space exhaustion, but drivers must handle a fail
of request_irq() anyway. When the interrupt is freed, the vector
is handed back as well.
This solves a long standing problem with large unconditional
vector allocations for a certain class of enterprise devices
which prevented server hibernation due to vector space
exhaustion when the unused allocated vectors had to be migrated
to CPU0 while unplugging all non boot CPUs.
The code has been equipped with trace points and detailed debugfs
information to aid analysis of the vector space"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
genirq: Add config option for reservation mode
x86/vector: Use correct per cpu variable in free_moved_vector()
x86/apic/vector: Ignore set_affinity call for inactive interrupts
x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
x86/apic: Use dead_cpu instead of current CPU when cleaning up
ACPI/init: Invoke early ACPI initialization earlier
x86/vector: Respect affinity mask in irq descriptor
x86/irq: Simplify hotplug vector accounting
x86/vector: Switch IOAPIC to global reservation mode
x86/vector/msi: Switch to global reservation mode
x86/vector: Handle managed interrupts proper
x86/io_apic: Reevaluate vector configuration on activate()
iommu/amd: Reevaluate vector configuration on activate()
iommu/vt-d: Reevaluate vector configuration on activate()
x86/apic/msi: Force reactivation of interrupts at startup time
x86/vector: Untangle internal state from irq_cfg
x86/vector: Compile SMP only code conditionally
x86/apic: Remove unused callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- a refactoring of the early virt init code by merging 'struct
x86_hyper' into 'struct x86_platform' and 'struct x86_init', which
allows simplifications and also the addition of a new
->guest_late_init() callback. (Juergen Gross)
- timer_setup() conversion of the UV code (Kees Cook)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/xen: Use guest_late_init to detect Xen PVH guest
x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure
x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA
x86/virt: Add enum for hypervisors to replace x86_hyper
x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init'
x86/platform/UV: Convert timers to use timer_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug update from Ingo Molnar:
"A single change enhancing stack traces by hiding wrapper function
entries"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/stacktrace: Avoid recording save_stack_trace() wrappers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some
more"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Make iommu_pmu const and __initconst
x86: Use ARRAY_SIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Three smaller changes:
- clang fix
- boot message beautification
- unnecessary header inclusion removal"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Disable Clang warnings about GNU extensions
x86/boot: Remove unnecessary #include <generated/utsrelease.h>
x86/boot: Spell out "boot CPU" for BP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"Two minor updates to AMD SMCA support, plus a timer_setup() conversion"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Fix mce_severity_amd_smca() signature
x86/MCE/AMD: Always give panic severity for UC errors in kernel context
x86/mce: Convert timers to use timer_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 update from Tony Luck:
"Stop ia64 being the last holdout using GENERIC_TIME_VSYSCALL_OLD so
that John Stultz can drop that code"
* tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: Update fsyscall gettime to use modern vsyscall_update
|
|
Pull OpenRISC updates from Stafford Horne:
"The OpenRISC work is a bit more interesting this time, adding SMP
support and a few general cleanups.
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as
true" get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of
the necessary data-structures to be per-cpu.
The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push
it together with these patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: fix possible deadlock scenario during timer sync
openrisc: pass endianness info to sparse
openrisc: add tick timer multi-core sync logic
openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
openrisc: support framepointers and STACKTRACE_SUPPORT
openrisc: add simple_smp dts and defconfig for simulators
openrisc: add cacheflush support to fix icache aliasing
openrisc: sleep instead of spin on secondary wait
openrisc: fix initial preempt state for secondary cpu tasks
openrisc: initial SMP support
irqchip: add initial support for ompic
dt-bindings: add openrisc to vendor prefixes list
openrisc: use qspinlocks and qrwlocks
openrisc: add 1 and 2 byte cmpxchg support
openrisc: use shadow registers to save regs on exception
dt-bindings: openrisc: Add OpenRISC platform SoC
Documentation: openrisc: Updates to README
Documentation: Move OpenRISC docs out of arch/
MAINTAINERS: Add OpenRISC pic maintainer
openrisc: dts: or1ksim: Add stdout-path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- more printk modernization
- various cleanups and fixes (incl. a race condition) for Mac
- defconfig updates
* tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.14-rc7
m68k/mac: Add mutual exclusion for IOP interrupt polling
m68k/mac: Disentangle VIA/RBV and NuBus initialization
m68k/mac: Disentangle VIA and OSS initialization
m68k/mac: More printk modernization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68k updates from Greg Ungerer:
"The bulk of the changes are to support the ColdFire 5441x SoC family
with their MMU enabled. The parts have been supported for a long time
now, but only in no-MMU mode.
Angelo Dureghello has a new board with a 5441x and we have ironed out
the last problems with MMU enabled on it. So there is also some
changes to properly support that board too.
Also a fix for a link problem when selecting the traditional 68k beep
device in no-MMU configurations"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: add Sysam stmark2 open board support
m68k: coldfire: add dspi0 module support
m68k: pull mach_beep in setup.c
m68k: allow ColdFire m5441x parts to run with MMU enabled
m68k: fix ColdFire node shift size calculation
m68k: move coldfire MMU initialization code
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups"
* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
mmc: dw_mmc: Convert timers to use timer_setup()
mmc: dw_mmc: Cleanup the DTO timer like the CTO one
mmc: vub300: Use common code in __download_offload_pseudocode()
mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
mmc: Convert timers to use timer_setup()
mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
mmc: sdhci-acpi: Let devices define their own private data
mmc: mediatek: perfer to use rise edge latching for cmd line
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: add latch-ck support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add busy_check support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add pad_tune0 support
mmc: mediatek: make hs400_tune_response only for mt8173
arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- drivers for MAX31785 and MAX6621
- support for AMD family 17h (Ryzen, Threadripper) temperature sensors
- various driver cleanups and minor improvements
* tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
dt-bindings: pmbus: Add Maxim MAX31785 documentation
pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller
hwmon: (aspeed-pwm-tacho) Sort headers
hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference
hwmon: (max6621) Inverted if condition in max6621_read()
hwmon: (asc7621) remove redundant assignment to newval
hwmon: (xgene) Support hwmon v2
hwmon: (gpio-fan) Fix null pointer dereference at probe
hwmon: (gpio-fan) Convert to use GPIO descriptors
hwmon: (gpio-fan) Rename GPIO line state variables
hwmon: (gpio-fan) Get rid of the gpio alarm struct
hwmon: (gpio-fan) Get rid of platform data struct
hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path
hwmon: (gpio-fan) Send around device pointer
hwmon: (gpio-fan) Localize platform data
hwmon: (gpio-fan) Use local variable pointers
hwmon: (gpio-fan) Move DT bindings to the right place
Documentation: devicetree: add max6621 device
hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor
hwmon: (w83793) make const array watchdog_minors static, reduces object code size
...
|
|
If CONFIG_SYSCTL=n and CONFIG_ARMV8_DEPRECATED=y, the deprecated
instruction emulation code currently leaks some memory at boot
time, and won't have any runtime control interface. This does
not feel like useful or intended behaviour...
This patch adds a dependency on CONFIG_SYSCTL, so that such a
kernel can't be built in the first place.
It's probably not worth adding the error-handling / cleanup code
that would be needed to deal with this otherwise: people who
desperately need the emulation can still enable SYSCTL.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit fb8722735f50 ("arm64: support __int128 on gcc 5+") added support
for the __int128 data type, but this breaks the build in some configurations
where GCC ends up emitting calls to the __lshrti3 helper in libgcc, which
results in a link error:
kernel/sched/fair.o: In function `__calc_delta':
fair.c:(.text+0xca0): undefined reference to `__lshrti3'
kernel/time/timekeeping.o: In function `timekeeping_resume':
timekeeping.c:(.text+0x3f60): undefined reference to `__lshrti3'
make: *** [vmlinux] Error 1
Fix the build by providing an implementation of __lshrti3, like we do
already for __ashlti3 and __ashrti3.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
* pm-sleep:
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
PM / sleep: Remove pm_complete_with_resume_check()
PM: ARM: locomo: Drop suspend and resume bus type callbacks
PM: Use a more common logging style
PM: Document rules on using pm_runtime_resume() in system suspend callbacks
|
|
* acpi-pmic:
ACPI / PMIC: Add TI PMIC TPS68470 operation region driver
* acpi-apei:
APEI / ERST: use 64-bit timestamps
ACPI / APEI: Remove arch_apei_flush_tlb_one()
arm64: mm: Remove arch_apei_flush_tlb_one()
ACPI / APEI: Remove ghes_ioremap_area
ACPI / APEI: Replace ioremap_page_range() with fixmap
ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
* acpi-x86:
ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
|
|
* pm-cpufreq: (22 commits)
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpufreq: pxa: convert to clock API
cpufreq: speedstep-lib: mark expected switch fall-through
cpufreq: ti-cpufreq: add missing of_node_put()
cpufreq: dt: Remove support for Exynos4212 SoCs
cpufreq: imx6q: Move speed grading check to cpufreq driver
cpufreq: ti-cpufreq: kfree opp_data when failure
cpufreq: SPEAr: pr_err() strings should end with newlines
cpufreq: powernow-k8: pr_err() strings should end with newlines
cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelist
arm64: wire cpu-invariant accounting support up to the task scheduler
arm64: wire frequency-invariant accounting support up to the task scheduler
arm: wire cpu-invariant accounting support up to the task scheduler
arm: wire frequency-invariant accounting support up to the task scheduler
drivers base/arch_topology: allow inlining cpu-invariant accounting support
drivers base/arch_topology: provide frequency-invariant accounting support
cpufreq: dt: invoke frequency-invariance setter function
cpufreq: arm_big_little: invoke frequency-invariance setter function
...
|
|
* pm-domains:
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
PM / Domains: Allow genpd users to specify default active wakeup behavior
PM / Domains: Add support to select performance-state of domains
PM / Domains: Rename genpd internals from pm_genpd_* to genpd_*
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes:
- make KGDB work again which got broken by the conversion of WARN()
to #UD. The WARN fixup needs to run before the notifier callchain,
otherwise KGDB tries to handle it and crashes.
- disable KASAN in the ORC unwinder to prevent false positive KASAN
warnings
- prevent default mapping above 47bit when 5 level page tables are
enabled
- make the delay calibration optimization work correctly, which had
the conditionals the wrong way around and was operating on data
which was not yet updated.
- remove the bogus X86_TRAP_BP trap init from the default IDT init
table, which broke 32bit int3 handling by overwriting the correct
int3 setup.
- replace this_cpu* with boot_cpu_data access in the preemptible
oprofile init code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Handle warnings before the notifier chain, to fix KGDB crash
x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging
x86/idt: Remove X86_TRAP_BP initialization in idt_setup_traps()
x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
x86/unwind: Disable KASAN checking in the ORC unwinder
x86/smpboot: Make optimization of delay calibration work correctly
|
|
Writing an invalid schemata with no domain values (e.g., "(L3|MB):"),
results in a silent failure, i.e. the last_cmd_status returns OK,
Check for an empty value and set the result string with a proper error
message and return -EINVAL.
Before the fix:
# mkdir /sys/fs/resctrl/p1
# echo "L3:" > /sys/fs/resctrl/p1/schemata
(silent failure)
# cat /sys/fs/resctrl/info/last_cmd_status
ok
# echo "MB:" > /sys/fs/resctrl/p1/schemata
(silent failure)
# cat /sys/fs/resctrl/info/last_cmd_status
ok
After the fix:
# mkdir /sys/fs/resctrl/p1
# echo "L3:" > /sys/fs/resctrl/p1/schemata
-bash: echo: write error: Invalid argument
# cat /sys/fs/resctrl/info/last_cmd_status
Missing 'L3' value
# echo "MB:" > /sys/fs/resctrl/p1/schemata
-bash: echo: write error: Invalid argument
# cat /sys/fs/resctrl/info/last_cmd_status
Missing 'MB' value
[ Tony: This is an unintended side effect of the patch earlier to allow the
user to just write the value they want to change. While allowing
user to specify less than all of the values, it also allows an
empty value. ]
Fixes: c4026b7b95a4 ("x86/intel_rdt: Implement "update" mode when writing schemata file")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20171110191624.20280-1-tony.luck@intel.com
|
|
Fixes: d004a5e7d4dd ("block: remove __bio_kmap_atomic")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helper doesn't buy us much over calling kmap_atomic directly.
In fact in the only caller it does a bit of useless work as the
caller already has the bvec at hand, and said caller would even
buggy for a multi-segment bio due to the use of this helper.
So just remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull KVM fix from Radim Krčmář:
"Fix PPC HV host crash that can occur as a result of resizing the guest
hashed page table"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates
|
