summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-07-29sh: dma-sh: Fix up dreamcast dma.h mach path.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Add ARCH_DEFCONFIG entries for sh and sh64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Fix compile error of Solution EngineNobuhiro Iwamatsu
When I compiled Solution Engine, this become compile error because plaform device of sh_eth device becomes enable. When sh7710/sh7712 which could use sh_eth was chosen, revised it so that platform device of sh_eth device became enable. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Proper __put_user_asm() size mismatch fix.OGAWA Hirofumi
This fixes up the workaround in 2b4b2bb42137c779ef0084de5df66ff21b4cd86e and cleans up __put_user_asm() to get the sizing right from the onset. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.Paul Mundt
If none is defined, provide a sane default, as we do for the other options. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Add an arch/sh/kernel/.gitignorePaul Mundt
Ignore vmlinux.lds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: dreamcast: fix build failure from header reorg.Paul Mundt
Oops, machvec.h is in asm/, it was previously removed due to overzealous trimming. Fix up the path again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: migrate to arch/sh/include/Paul Mundt
This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: rsk7203: update defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: rsk7203: Add smc911x platform data.Paul Mundt
This hooks up platform data for the SMC9118 on the RSK+7203. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Disable 64K hugetlb support when doing 64K SPU mappings powerpc/powermac: Fixup default serial port device for pmac_zilog powerpc/powermac: Use sane default baudrate for SCC debugging powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 64-bit powerpc: Show processor cache information in sysfs powerpc: Make core id information available to userspace powerpc: Make core sibling information available to userspace powerpc/vio: More fallout from dma_mapping_error API change ibmveth: Fix multiple errors with dma_mapping_error conversion powerpc/pseries: Fix CMO sysdev attribute API change fallout powerpc: Enable tracehook for the architecture powerpc: Add TIF_NOTIFY_RESUME support for tracehook powerpc: Add asm/syscall.h with the tracehook entry points powerpc: Make syscall tracing use tracehook.h helpers powerpc: Call tracehook_signal_handler() when setting up signal frames powerpc: Update cpu_sibling_maps dynamically powerpc: register_cpu_online should be __cpuinit powerpc: kill useless SMT code in prom_hold_cpus powerpc: Fix 8xx build failure powerpc: Fix vio build warnings ...
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (72 commits) sh: SuperH Mobile CEU and camera platform data for AP325RXA sh: Update smc911x platform data for AP325RXA sh: SuperH Mobile LCDC platform data for AP325RXA sh: Add SuperH Mobile CEU platform data for Migo-R sh: Add SuperH Mobile LCDC platform data for Migo-R sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build. sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian. sh: Wire up new syscalls. sh: fix uImage Entry Point sh_keysc: remove request_mem_region() and release_mem_region() sh: Don't miss pending signals returning to user mode after signal processing sh: Use clk_always_enable() on sh7366 sh: Use clk_always_enable() on sh7343 / SE77343 sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722 sh: Use clk_always_enable() on sh7723 / ap325rxa sh: Introduce clk_always_enable() function sh: Show all clocks and their state in /proc/clocks sh: Merge sh7343 and sh7722 clock code sh: Add SuperH Mobile MSTPCR bits to clock framework sh: Use arch_flags to simplify sh7722 siu clock code ...
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: stop_machine: fix up ftrace.c stop_machine: Wean existing callers off stop_machine_run() stop_machine(): stop_machine_run() changed to use cpu mask Hotplug CPU: don't check cpu_online after take_cpu_down Simplify stop_machine stop_machine: add ALL_CPUS option module: fix build warning with !CONFIG_KALLSYMS
2008-07-28sh: SuperH Mobile CEU and camera platform data for AP325RXAMagnus Damm
Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Update smc911x platform data for AP325RXAMagnus Damm
Pass board specific smc911x parameters using struct smc911x_platdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: SuperH Mobile LCDC platform data for AP325RXAMagnus Damm
Add LCD panel platform data for the AP325RXA board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile CEU platform data for Migo-RMagnus Damm
Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile LCDC platform data for Migo-RMagnus Damm
Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Wire up new syscalls.Paul Mundt
This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 syscalls. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: fix uImage Entry PointYoshihiro Shimoda
fix the problem that cannot boot using uImage when PAGE_SIZE is 8kbyte or 64kbyte. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Don't miss pending signals returning to user mode after signal processingStuart MENEFY
Without this patch, signals sent during architecture specific signal handling (typically as a result of the user's stack being inaccessible) are ignored. This is the SH version of commit c3ff8ec31c1249d268cd11390649768a12bec1b9 which was for the i386. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7366Magnus Damm
Use clk_always_enable() in the sh7366 processor code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7343 / SE77343Magnus Damm
Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722Magnus Damm
Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7723 / ap325rxaMagnus Damm
Use clk_always_enable() on the sh7723 processor and in the ap325rxa board code. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Show all clocks and their state in /proc/clocksMagnus Damm
Show all clocks in /proc/clocks, and also show if they are enabled or disabled. This is useful to show MSTPCR bits on SuperH Mobile processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Merge sh7343 and sh7722 clock codeMagnus Damm
This code makes sh7343 share the sh7722 clock code. Instead of just using the good and very old sh7343 clock implmentation, switch to the new MSTPCR enabled clock code. SIU clocks are disabled on sh7343 for now. With this change all SuperH Mobile devices now use the same clock code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile MSTPCR bits to clock frameworkMagnus Damm
Handle module stop clock bits in MSTPCRn through the clock framework. The clocks are named after the bits in the data sheet. The association between bit number and hardware block is processor specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use arch_flags to simplify sh7722 siu clock codeMagnus Damm
Make use of arch_flags to simplify the SIU clock code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28fix sh ptep_get_and_clear breakageAdrian Bunk
Commit 1ea0704e0da65b2b46f9142ff1391163aac24060 (mm: add a ptep_modify_prot transaction abstraction) triggered on sh build errors like the following: <-- snip --> ... CC arch/sh/mm/pg-sh4.o cc1: warnings being treated as errors include2/asm/pgtable.h:139: error: 'ptep_get_and_clear' declared inline after being called include2/asm/pgtable.h:139: error: previous declaration of 'ptep_get_and_clear' was here make[2]: *** [arch/sh/mm/pg-sh4.o] Error 1 <-- snip --> Since there's no good reason for marking these global functions as "inline" this patch therefore removes the inline's. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Renesas R0P7785LC0011RL board supportYoshihiro Shimoda
This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add memory chunks to SH-Mobile UIO devicesMagnus Damm
This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirqMagnus Damm
This patch exports the VPU, VEU(1) and VEU(2) blocks of the sh7366 to user space using the uio_pdrv_genirq platform driver. While at it, fix up the VEU(2) interrupt vector. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirqMagnus Damm
This patch exports the VPU, VEU2H0 and VEU2H1 blocks of the sh7723 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7722 VPU and VEU using uio_pdrv_genirqMagnus Damm
This patch exports the VPU and VEU blocks of the sh7722 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7343 VPU and VEU using uio_pdrv_genirqMagnus Damm
This patch exports the VPU and VEU blocks of the sh7343 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh2(A) exception handler updateYoshinori Sato
This patch is By sh2 - Remove duplicate code - Reduce stack usage - Cleanup and little optimize By sh2a - Add missing handler(256 to 511) - Use sh2a instructions handler Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: update Solution Engine 7343Yoshihiro Shimoda
updated the following codes for Solution Endine 7343: - fix compile error in arch/sh/boards/se/7343/irq.c - add nor flash physmaps - update defconfig Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: update sh7343 codeYoshihiro Shimoda
updated the following codes for SH7343: - add register_intc_controller() - add EARLY_SCIF_CONSOLE_PORT - add define of CPG register Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: fix pg-sh4.c build breakage in linux-nextMagnus Damm
Remove inline from ptep_get_and_clean() to match with header file prototype. Makes linux-next build. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: enable I2C on the ap325rxa boardMagnus Damm
This patch enables I2C on the sh7723-based ap325rxa board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7366Magnus Damm
This patch adds platform data for the single I2C channel on sh7366. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7723Magnus Damm
This patch adds platform data for the single I2C channel on sh7723. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7343Magnus Damm
This patch adds platform data for two I2C channels to the sh7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add interrupt ack code to sh4aYoshihiro Shimoda
This patch is based on interrupt acknowledge code for external interrupt sources on sh3 processors and adds on sh4a processors. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Fix up link error on SH-2 zImage with older binutils.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Conditionally re-enable IRQs in fault path.Stuart Menefy
The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Record the major cut revision for probed SH-4A parts.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Optimized flush_icache_range() implementation.Chris Smith
Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 13:09:35 +0000