summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.David Daney
This is the main support code for the patch. Here we just add the code, the following patches hook it up. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c
2008-10-11MIPS: Add HARDWARE_WATCHPOINTS configure option.David Daney
This is automatically set for all MIPS32 and MIPS64 processors. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add TX4939 ATA support (v2)Atsushi Nemoto
Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Rewrite spinlocks to ticket locks.Ralf Baechle
Based on patch by Chad Reese of Cavium Networks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary .set pseudosRalf Baechle
They possibly silence meaningful warnings ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Alchemy: rename directoryRalf Baechle
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Implement prom_free_prom_memoryAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: IOC LED supportAtsushi Nemoto
Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Microoptimize interrupt handlersAtsushi Nemoto
The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: stop_unused_modulesAtsushi Nemoto
TXx9 SoCs have pin multiplex. Stop some controller modules which can not be used due to pin configurations. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Convert to GPIO libFlorian Fainelli
This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup the headers againFlorian Fainelli
This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove obsolute reference to setup_serial_portFlorian Fainelli
We are no longer using setup_serial_port. So just remove it from the prom code. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Fix id usage in platform devicesFlorian Fainelli
When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: replace raw volatile read with a readlFlorian Fainelli
This patch replaces a raw read using volatiles with a readl. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove gpio bootup stateFlorian Fainelli
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Use physical addresses for gpio and device controller registersFlorian Fainelli
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup and group definitions to their right placesFlorian Fainelli
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add board_be_init for TX4927/TX4938Atsushi Nemoto
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEPAtsushi Nemoto
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Raise priority of interrupts for errors, timers, SIOAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add mtd supportAtsushi Nemoto
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Runtime configuration of timeout-errorAtsushi Nemoto
Add kernel options to control bus timeout error. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Cache fixupAtsushi Nemoto
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Early command-line preprocessingAtsushi Nemoto
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11MIPS: TXx9: Add prom_getenvAtsushi Nemoto
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Improve handling of built-in and command-line argsAtsushi Nemoto
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RBTX4927: More explicit initializationAtsushi Nemoto
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: PMC MSP71XX gpio driversPatrick Glass
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass <patrickglass@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
2008-10-11MIPS: Use compat_sys_ptraceThomas Bogendoerfer
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-10Merge branch 'sched-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits) sched debug: add name to sched_domain sysctl entries sched: sync wakeups vs avg_overlap sched: remove redundant code in cpu_cgroup_create() sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const sched: minor optimizations in wake_affine and select_task_rq_fair sched: maintain only task entities in cfs_rq->tasks list sched: fixup buddy selection sched: more sanity checks on the bandwidth settings sched: add some comments to the bandwidth code sched: fixlet for group load balance sched: rework wakeup preemption CFS scheduler: documentation about scheduling policies sched: clarify ifdef tangle sched: fix list traversal to use _rcu variant sched: turn off WAKEUP_OVERLAP sched: wakeup preempt when small overlap kernel/cpu.c: create a CPU_STARTING cpu_chain notifier kernel/cpu.c: Move the CPU_DYING notifiers sched: fix __load_balance_iterator() for cfq with only one task ...
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Use RNG interface instead of get_random_bytes crypto: rng - RNG interface and implementation crypto: api - Add fips_enable flag crypto: skcipher - Move IV generators into their own modules crypto: cryptomgr - Test ciphers using ECB crypto: api - Use test infrastructure crypto: cryptomgr - Add test infrastructure crypto: tcrypt - Add alg_test interface crypto: tcrypt - Abort and only log if there is an error crypto: crc32c - Use Intel CRC32 instruction crypto: tcrypt - Avoid using contiguous pages crypto: api - Display larval objects properly crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup crypto: Kconfig - Replace leading spaces with tabs
2008-10-10Merge phase #1 of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges phase 1 of the x86 tree, which is a collection of branches: x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump, x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart, x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile, x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and x86/vmalloc and as Ingo says: "these are the easiest, purely independent x86 topics with no conflicts, in one nice Octopus merge". * 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits) x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE x86: mtrr_cleanup: first 1M may be covered in var mtrrs x86: mtrr_cleanup: print out correct type v2 x86: trivial printk fix in efi.c x86, debug: mtrr_cleanup print out var mtrr before change it x86: mtrr_cleanup try gran_size to less than 1M, v3 x86: mtrr_cleanup try gran_size to less than 1M, cleanup x86: change MTRR_SANITIZER to def_bool y x86, debug printouts: IOMMU setup failures should not be KERN_ERR x86: export set_memory_ro and set_memory_rw x86: mtrr_cleanup try gran_size to less than 1M x86: mtrr_cleanup prepare to make gran_size to less 1M x86: mtrr_cleanup safe to get more spare regs now x86_64: be less annoying on boot, v2 x86: mtrr_cleanup hole size should be less than half of chunk_size, v2 x86: add mtrr_cleanup_debug command line x86: mtrr_cleanup optimization, v2 x86: don't need to go to chunksize to 4G x86_64: be less annoying on boot x86, olpc: fix endian bug in openfirmware workaround ...
2008-10-09[CPUFREQ] correct broken links and email addressesNémeth Márton
Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-08[MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte SurRalf Baechle
Symbol name spaghetti which is too complicated to cleanup on this stage of the release cycle breaks the build on BCM1480 platforms. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-08Merge branches 'sched/devel', 'sched/cpu-hotplug', 'sched/cpusets' and ↵Ingo Molnar
'sched/urgent' into sched/core
2008-10-06Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
2008-10-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
2008-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
2008-10-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y [MIPS] Fix CMP Kconfig configuration and mark as broken.
2008-10-06kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMIJan Kiszka
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>