summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-07-18ARM: dts: imx6qdl: remove fsl,ssi-dma-eventsMarkus Pargmann
All dtsi files where already moved to generic dma bindings. Remove the old non-generic DMA properties. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx5: remove fsl,ssi-dma-eventsMarkus Pargmann
All imx5*.dtsi files define the generic dma bindings. Drop the old non-generic fsl,ssi-dma-events. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx50: add ssi dma propertiesMarkus Pargmann
Replace old ssi dma properties by the generic dma properties. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sx: Use "vddarm" as the regulator nameFabio Estevam
The other i.mx6 variants use "vddarm" as the name of the internal regulator that powers the core. Use the same convention here for consistency. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: remove non-working spdif rxtx4 and rxtx6 clocksAnssi Hannula
The S/PDIF rxtx4 and rxtx6 clock inputs are "ESAI_HCKT" and "MLB clock", respectively, according to the SoC documentation, and they are currently mapped to clocks "esai" and "mlb". However, they do not seem to actually work correctly. Testing on a Cubox-i system with fsl_spdif driver forced to select one of those as input will result in I/O errors on audio playback, which I believe means missing clock signal. Possibly the "ESAI_HCKT" and "MLB clock" refer to some other clocks related to ESAI and MLB, or we are missing something else. Since audio playback will not work if fsl_spdif selects these clocks (which happens rarely), set the inputs do dummy clocks, at least for now. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: Mark Brown <broonie@kernel.org> Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: remove wrong spdif rxtx2 clockAnssi Hannula
The rxtx2 clock of i.MX6 S/PDIF is currently set to "asrc" clock. However, according to SoC documentation, rxtx2 is connected to ASRC_EXT_CLK, a different external clock. Testing on Cubox-i system seems to confirm that: when fsl_spdif is forced to select rxtx2 as input clock, audio playback fails with an I/O error. Set rxtx2 to the dummy clock by default to prevent fsl_spdif from selecting it. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: Mark Brown <broonie@kernel.org> Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: add support for Ka-Ro TX6 modulesLothar Waßmann
This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: i.MX35: Add GPT nodeAlexander Shiyan
This patch adds the missing (General Purpose Timer) GPT devicetree node for i.MX35 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: add missing compatible and clock properties for kppLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6q-udoo: Add USB Host supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx25: mbimxsd25: Add displays support.Denis Carikli
The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6qdl: Add CSI device tree port nodes for IPU1 and IPU2Philipp Zabel
This patch adds CSI subnodes for IPU1 and IPU2 that will contain ports and endpoints connecting to external elements in the video pipeline. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: pfla02: Add ethernet phy supply regulatorPhilipp Zabel
The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used to power the KSZ9031 PHY DVDDH input and to pull the necessary pins (including bootstrap pins) high. It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx51-babbage: Add PMIC RTC supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: ventana: update model to reflect Dual/Solo CPU typesTim Harvey
The imx6dl dts supports both DualLite and Solo CPU variants The imx6q dts supports both Dual and Quad CPU variants Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: ventana: change sound device nameTim Harvey
The 'model' property in the imx-audio-sgtl5000 binding specifies the user-visible name of the audio device. This should be something common and not baseboard specific. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dt: imx28-cfa10036: introduce a regulator for mmc0Alexandre Belloni
The PWM3 pinmux configuration conflicts with gpio 3.28. Introduce a regulator for mmc0 so that it conflicts with the pwm driver and fails gracefully. The kernel will then able to access mmc0 normally. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sl: add fec sleep pinctrl for pin PM stateFugang Duan
when system suspend, need to set pins to low power state to save IO power consumption, there are three states of pinctrl: "default", "idle" and "sleep". Currently enet supports default and sleep state. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6qdl-sabresd: Configure the ECSPI1 chip select pinFabio Estevam
GPIO4_9 is used as ECSPI1 chip select and it needs to be configured as GPIO. Configure the pin functionality explicitly in the dts file instead of relying on the fact that it comes configured as GPIO from POR or from the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboardAlexander Shiyan
This patch adds support for the cpuimx27 board from Eukrea and its baseboard. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: add initial imx6sx-sdb board supportShawn Guo
Add initial imx6sx-sdb board support with limited devices enabled. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: add initial imx6sx device tree sourceShawn Guo
Add initial device tree source for i.MX6 SoloX SoC. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: add pin function header for imx6sxShawn Guo
Add pin function header for i.MX6 SoloX SoC. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: clk-vf610: fix FlexCAN clock gatingStefan Agner
Extend the clock control for FlexCAN with the second gate which enable the clocks in the Clock Divider (CCM_CSCDR2) register too. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Use CLOCKSOURCE_OF_DECLARE() for DT targetsAlexander Shiyan
This patch uses clocksource_of_init() call for DT targets. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX53: globally disable supervisor protectSteffen Trumtrar
Most peripherals on the i.MX53 have an Off-Platform Peripheral Access Control Register (OPACR) in which the access rights (together with the MPROT registers) can be declared. However, this does not seem to work for example for SSI1+SDMA, because the supervisor bit is not set for the SDMA unit. It does work for SSI2, the QSB for example uses SSI2 for its audio. But SSI2 only works because it does NOT have an OPACR. The right solution would be to fix the access rights for the SDMA, but the unit responsible for this is the Central Security Unit (CSU), which of course is NOT documented. So, until documentation for this is openly available, turn off the supervisor protection because it cripples the hardware. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: allow disabling supervisor protect via DTSteffen Trumtrar
The i.MX SoCs allow to setup fine grained access rights to peripherals on the AIPS bus. This is done via the Peripheral Access Register (PAR) in e.g. the i.MX21 or in later SoC versions the Off-Platform Peripheral Access Control Register (OPACR), e.g. i.MX53. Under certain circumstances this leads to problems in which bus masters are not granted their access rights to peripherals. To be able to disable these restrictions on DT platforms, add a helper function that looks for AIPS nodes in the DT and disables them for every compatible node it finds. The compatible has to be declared in the mach-specific entry file, where this helper function should then be called. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX27 clk: Add 26 MHz oscillator circuit clock gateAlexander Shiyan
This patch adds missing 26 MHz oscillator circuit clock gate support. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX27 clk: Remove unused definitionsAlexander Shiyan
This patch removes definitions which not used anywhere in the driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX27 clk: Introduce DT include for clock providerAlexander Shiyan
Use clock defines in order to make devicetrees more human readable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Remove Freescale Logic Product Development i.MX27 Lite-Kit board ↵Alexander Shiyan
support The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27Alexander Shiyan
This patch removes excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27. Instead we use SOC_IMX*. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX: Remove i.MX1 camera supportAlexander Shiyan
i.MX1 camera driver has been removed by the commit 90b055898e. This patch removes remaining support files for this camera. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: use PTR_ERR_OR_ZEROFabian Frederick
replace IS_ERR/PTR_ERR Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: build cpu_is_imx6sl function conditionallyArnd Bergmann
imx6q_pm_enter calls imx6sl_set_wait_clk when run on an imx6sl based machine. However if support for imx6sl is not enabled at compile time, this prevents us from building the kernel and we get this link error instead: arch/arm/mach-imx/built-in.o: In function `imx6q_pm_enter': :(.text+0x4b84): undefined reference to `imx6sl_set_wait_clk' This makes the cpu_is_imx6sl function conditionally return false if imx6sl is disabled at compile-time, which matches what the older cpu_is_mx* macros did. We have similar inline functions for the other imx6 variants, but so far I have not run into a case where the extra #ifdef is necessary. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: imx6sx uses imx6q cpuidle codeArnd Bergmann
Building a kernel for imx6sx but without imx6q support results in this link error because of the missing cpuidle driver: arch/arm/mach-imx/built-in.o: In function `imx6sx_init_late'::(.init.text+0xc228): undefined reference to `imx6q_cpuidle_init' This patch adds a Makefile entry so we always build support for the imx6q_cpuidle code when at least one of the 6sx or 6q variants are enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: drop PL310 errata 588369 and 727915Shawn Guo
The PL310 integrated on i.MX6 series and VF610 are revision r3p1 and later. Per ARM PL310 errata document, 588369 is fixed in r2p0 and 727915 is fixed in r3p1. Neither is needed for i.MX6 or VF610. So let's drop them. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx_v6_v7_defconfig: add FSL_EDMA and PRINTK_TIMEStefan Agner
Add EDMA for DMA support for Vybrid SoCs. Also add printk time. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: clk-imx6sx: register SSI/SSI_IPG as shared gate clocksFabio Estevam
SSI and SSI_IPG are clocks controlled by the same clock gating field, so register them with imx_clk_gate2_shared. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx_v6_v7_defconfig: Enable flexcan driver for can supportSilvio Fricke
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx_v6_v7_defconfig: Enable STMPE gpio supportSilvio Fricke
Enable STMPE gpio support as this is used on MX6 Data Modul edm-qmx6 board. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx: mark .dt_compat as constShawn Guo
Otherwise GCC will mark the .init.rodata section R/W, which causes a compile error once we add other real R/O data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: mx6: Only check for 1.2GHz for mx6quadFabio Estevam
It is only the mx6quad variant that can run up to 1.2GHz, so add the check accordingly. This avoids getting the following warning on a mx6solo: failed to disable 1.2 GHz OPP Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx_v4_v5_defconfig: Add USB device optionsFabio Estevam
Allow USB device to work by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX25 clk: Use of_clk_init() for DT caseDenis Carikli
Replace .init_time() hook with of_clk_init() for DT targets. Based on: d4347ee ARM: i.MX27 clk: Use of_clk_init() for DT case Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM i.MX25 clk: Fix gpt timer clock.Denis Carikli
The gpt0 timer clock has been wrong since: 6bbaec5 ARM i.MX25: implement clocks using common clock framework Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX21 clk: Add devicetree supportAlexander Shiyan
This patch adds devicetree support CCM module for i.MX21 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX21 clk: Cleanup driverAlexander Shiyan
This is a cleanup for i.MX21 clk driver. This change includes: - Reduce license text. - Remove unused definitions. - Remove unused #include and sort the rest. - Remove useless comment. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX21 clk: Remove clk_register_clkdev() for unused clocksAlexander Shiyan
This patch removes clk_register_clkdev() for the clocks that do not have any users for boards and drivers. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX21 clk: Clock initialization reworkAlexander Shiyan
This patch perform rework i.MX21 clock initialization. This includes adding missing clocks and sort clocks by register address. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-08 00:24:13 +0000