summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-07-07ARM: mxs/mx28evk: add leds-gpio device for heartbeatShawn Guo
It adds LED2 on mx28evk board as heartbeat trigger for diagnostic purpose. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx53_evk: Add support for LEDFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx53_loco: Add support for LEDFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs_defconfig: Add mx23evk and mx28evk buildShawn Guo
The patch adds following configurations to enable build of mx23evk and mx28evk in defconfig. CONFIG_MACH_MX23EVK CONFIG_MACH_MX28EVK Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07Merge remote-tracking branch 'grant/gpio/next-mx' into devel-featuresSascha Hauer
Conflicts: arch/arm/mach-imx/mach-mx31_3ds.c arch/arm/mach-imx/mach-scb9328.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer
CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internalFabio Estevam
On the i.MX SPI driver the chipselect pins can be of the following types: - internal: when the chipselect pin is used as a dedicated CS pin of the CSPI controller - GPIO: a generic GPIO can be used as a chipselect funtion On the mx27_3ds the SPI2 chip select is a GPIO, so don't annotate 'internal' in the chip select definition. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq functionFabio Estevam
Use the standard gpio_to_irq function instead of a dedicated IRQ_GPIOx macro. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/scb9328: Make the UART gpio setup simplerFabio Estevam
Place the UART gpio initialization inside the scb9328_init function as it is done on other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07plat-mxc/pwm.c: use resource_size()H Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx/mach-apf9328: Simplify UART0 registrationFabio Estevam
As no flag is passed into UART0 platform data, pass NULL argument when registering UART0. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usageSascha Hauer
There are several occurences where MXC_INTERNAL_IRQ is assumed to be the start of the gpio interrupts. It was never meant this way. Replace these with gpio_to_irq. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-07-07ARM i.MX avic: do not depend on MXC_INTERNAL_IRQSSascha Hauer
This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX tzic: do not depend on MXC_INTERNAL_IRQSSascha Hauer
This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer
CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: dmav1: kill SoC ifdefsSascha Hauer
since we now can include all soc specific headers at once we do not need the ifdeffery anymore. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: remove SoC defines around header includesSascha Hauer
All soc specific header have proper namespace now and thus can be included at once. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: define CLOCK_TICK_RATE to bogus valueSascha Hauer
We have a clocksource which renders CLOCK_TICK_RATE useless. Define it to a bogus value to get rid of some ifdeffery. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: fix last user of iomux.h and remove itSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs/tx28: convert to new leds-gpio registration helperUwe Kleine-König
This allows to move the led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5: convert to new leds-gpio registration helperUwe Kleine-König
This gets rid of per machine struct platform_device definitions and allows to move the platform data and led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx: convert to new leds-gpio registration helperUwe Kleine-König
This gets rid of per machine struct platform_device definitions and allows to move the platform data and led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx51_babbage: Use gpio_request_array for USBH1 pinsFabio Estevam
Instead of using gpio_request followed by gpio_direction_output use gpio_request_array when requesting multiple pins. Also fixed the location of the delay for the reset and make the BABBAGE_USB_PHY_RESET to toggle. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to ↵Fabio Estevam
common place The USB PHY Reset GPIO can be configured in the same place as the other GPIOs. While at it rename the pin as BABBAGE_USB_PHY_RESET to make clearer its purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: i.MX53: Fix IOMUX type o'sTroy Kisky
", o" was used for ", 0" ", 17" was used for ", 7 | 0x10" Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07mach-mx5: fix the I2C clock parentsLothar Waßmann
The clock from which the I2C timing is derived is the ipg_perclk not ipg_clk. I2C bus frequency was lower by a factor of ~8 due to the clock divider calculation being based on 66.5MHz IPG clock while the bus actually uses 8MHz ipg_perclk. Kernel version: 3.0.0-rc2 branch 'imx-for-next' of git://git.pengutronix.de/git/imx/linux-2.6 Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0Uwe Kleine-König
The pins are actually used (not in mainline yet): D4 -> SSP2_D0 D5 -> GPIO D6 -> GPIO D7 -> GPIO for owire so their pinmapping for SSP0 is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.hAxel Lin
Fix below build error: CC arch/arm/mach-mxs/devices/platform-mxsfb.o arch/arm/mach-mxs/devices/platform-mxsfb.c: In function 'mx23_add_mxsfb': arch/arm/mach-mxs/devices/platform-mxsfb.c:27: error: implicit declaration of function 'DMA_BIT_MASK' make[2]: *** [arch/arm/mach-mxs/devices/platform-mxsfb.o] Error 1 make[1]: *** [arch/arm/mach-mxs/devices] Error 2 make: *** [arch/arm/mach-mxs] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix some interrupts marked as reserved.Fabio Estevam
Mark the actual interrupt source for some interrupts currently marked as reserved. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07MXC: iomux-v3: correct NO_PAD_CTRL definitionTroy Kisky
iomux-v3.c uses NO_PAD_CTRL as a 32 bit value so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41) Previously, anything requesting NO_PAD_CTRL would get their pad control register set to 0. Since it is a pad control mask, place it with the other mask values. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx51: Fix the address space length for SSIFabio Estevam
On MX51 the address space length for SSI is 16KB. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: imx-dma on imx25 has no other TO version but TO1Shawn Guo
The imx25 sdma script only gets TO1 version, so there is no need to encode "to1" in the variable name. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: change imx-dma default to_version to 1Shawn Guo
The value 0 is not a valid TO version number. With the current code, imx-sdma driver will try to load firmware sdma-imx25-to0.bin, which is obviously not a good name. Instead, sdma-imx25-to1.bin makes much more sense. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: sdma on imx25 is a V2 blockShawn Guo
The sdma on soc imx25 is not a V1 but V2 block. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: imx-sdma device gets 16K iosize than 4KShawn Guo
The sdma on all imx soc gets 16K IO space not 4K. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: iomux-v1: Fix build warningFabio Estevam
Fix the following warning: CC arch/arm/plat-mxc/iomux-v1.o arch/arm/plat-mxc/iomux-v1.c: In function 'mxc_gpio_setup_multiple_pins': arch/arm/plat-mxc/iomux-v1.c:160: warning: 'ret' may be used uninitialized in this function arch/arm/plat-mxc/iomux-v1.c:160: note: 'ret' was declared here Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Fix regulator supportFabio Estevam
Fix the 2.8V (VMMC1) and 1.8V (VGEN) voltage generation on mx27_3ds. Also configure the IOMUX for the PMIC interrupt pin and for the CSPI chip select that is connected to the MC13783 PMIC. In order to get the voltage for the LCD (2.8V and 1.8V) it is also necessary to turn on GPO1 and GPO3 supplies because they are connected to switches that enable these two voltages. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIOFabio Estevam
When setting the IOMUX of multiple pins via mxc_gpio_setup_multiple_pins, gpio_request is called and this prevents subsequent calls of gpio_request done by drivers to succeed. Remove gpio_request call from mxc_gpio_setup_multiple_pins function. As gpio_request is removed from mxc_gpio_setup_multiple_pins, there is no need to have mxc_gpio_release_multiple_pins anymore, so remove this function. Tested on a mx27_3ds board and after applying this patch it is possible to define all the IOMUX setup in a static array Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signalsFabio Estevam
Original code was assuming that the CSPI1 pins on the MX31PDK were the primary pin function, which is incorrect. On MX31PDK board these are the pins that provide CSPI1 functionality: DSR_DCE1 (ALT mode 1) --> CSPI1_CLK RI_DCE1 (ALT mode 1) --> CSPI1_RDY DTR_DTE1 -->CSI1_MOSI DSR_DTE1 --> CSPI1_MISO DTR_DCE2 ---> CSPI1_SS2 The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM. This patch fixes the CSPI1 IOMUX and makes the LCD to be functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numberingFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix the base addresses for the DDR memory regionsMarc Kleine-Budde
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix the chip select addressesFabio Estevam
MX53 has 4 chip selects (CS0 - CS3) and the valid combinations are: - CS0 (128MB) - CS0 (64MB), CS1 (64MB) - CS0 (64MB), CS1 (32MB), CS2 (32MB) - CS0 (32MB), CS1 (32MB), CS2 (32MB) , CS3 (32MB) Fix these addresses and also take into account all the four possibilities. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6Fabio Estevam
MX53_PAD_PATA_DATA6 can have the following alternate modes: PATA_DATA_6: mode 0 GPIO2_6: mode 1 EMI_NANDF_D_6: mode 3 ESDHC4_DAT6 mode 4 GPU3d_GPU_DEBUG_OUT_6 mode 5 IPU_DIAG_BUS_6 mode 6 Fix the modes accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dinh Nguyen <dinh.nguyen@freescale.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07mx51: Let USB Storage be built by defaultFabio Estevam
Let USB Storage be built by default. Also select NLS_ISO8859 so that the USB device can be mounted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs_defconfig: Change CONFIG_RTC_CLASS 'm' to 'y'Shawn Guo
The patch fixes the warning below. arch/arm/configs/mxs_defconfig:92:warning: symbol value 'm' invalid for RTC_CLASS Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-20Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: Fix DGT rate on 8960 and 8660 msm: timer: compensate for timer shift in msm_read_timer_count msm: timer: Fix SMP build error
2011-06-20msm: timer: Fix DGT rate on 8960 and 8660Stephen Boyd
The DGT runs at 27 MHz divided by 4 on 8660 and 8960. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-06-20Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix for incorrect xen_extra_mem_start. xen: When calling power_off, don't call the halt function. xen: Fix compile warning when CONFIG_SMP is not defined. xen: support CONFIG_MAXSMP xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"
2011-06-20Merge branch 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix register corruption in pvclock_scale_delta KVM: MMU: fix opposite condition in mapping_level_dirty_bitmap KVM: VMX: do not overwrite uptodate vcpu->arch.cr3 on KVM_SET_SREGS KVM: MMU: Fix build warnings in walk_addr_generic()
2011-06-19KVM: Fix register corruption in pvclock_scale_deltaZachary Amsden
The 128-bit multiply in pvclock.h was missing an output constraint for EDX which caused a register corruption to appear. Thanks to Ulrich for diagnosing the EDX corruption and Avi for providing this fix. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 15:25:05 +0000