summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-10-25Merge branch 'next-gpio-update' into for-nextKukjin Kim
2010-10-25ARM: S5P: Fix missed IRQ_EINT_BIT()Kukjin Kim
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43 (ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used in the Power Management operation (plat-samsung/pm.c). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Fix special function for IISv4 portMark Brown
When converting to use s3c_gpio_cfgpin_range() the function for the IISv4 block appears to have been typoed as 4 (the keypad) rather than 5 as it should be. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add s3c_gpio_cfgrange_nopull() helperBen Dooks
A number of the SDHCI code configure a GPIO to a special function and remove any pull-up, so add s3c_gpio_cfgrange_nopull() as a wrapper to the s3c_gpio_cfgall_range() to make the code that calls it fit on one line. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV310: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P6442: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fix small comments] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add s3c_gpio_cfgall_range() functionBen Dooks
Add a function to configure a range of GPIOs function and pull in one go, mainly for the SDHCI and framebuffer helpers which tend to do this. Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fix small comments] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV310: Change to using s3c_gpio_cfgpin_range()Kukjin Kim
This patch changes the code setting ranges of GPIO pins in mach-s5pv310 using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: coding-style fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fixed wrong change] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgpin_range()Kukjin Kim
This patch changes the code setting ranges of GPIO pins in mach-s5p64x0 using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: modified to s5p64x0 from s5p6440] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: fixed wrong change] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change dev-audio.c to use S3C_GPIO_SFN() for special functionsBen Dooks
To aide in changing the gpio code, remove the use of pin-specific configs and move to using the S3C_GPIO_SFN() versions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add GPIO configuration for a range of pinsBen Dooks
Add s3c_gpio_cfgpin_range() to configure a range of pins to the given value. This is useful for a number of blocks where the pins are in order and saves multiple calls to s3c_gpio_cfgpin(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: GONI: Add support for QT602240 TS driverMarek Szyprowski
Add required platform definitions for QT602240 touchscreen on I2C2 bus. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add si470x radio device to the GONI boardMarek Szyprowski
Add required platform definitions for si470x radio device on Samsung Goni board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add support for S6E63M0 LCD controller on GONI boardMarek Szyprowski
Add required platform definitions for S6E63M0 LCD controller on Samsung Goni board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] [kgene.kim@samsung.com: fix build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Power Management SupportJongpill Lee
This patch adds suspend-to-ram support for S5PV210. Note. This patch is confirmed on SMDKV210 and SMDKC110 board. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Fix build error on pm debugSangbeom Kim
This patch fixes build error by S3C2410 PM Suspend debug option due to undefined address. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Unify defines for both gpio interrupt typesMarek Szyprowski
Samsung S5P SoCs have the same interrupt type defines for both external interrupts and gpio interrupts. This patch removes all duplicates from S5PC100 and S5PV210 specific includes as well as gpio interrupt code and put a common defines to plat/irqs.h NOTE: Do not use this for S5P6440 and S5P6450. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: add note for S5P64X0] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: SAMSUNG: Add common samsung_gpiolib_to_irq functionJoonyoung Shim
This patch adds a common callback for gpio_to_irq() for external and gpio interrupts for Samsung SoCs. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: moved samsung_gpiolib_to_irq() for s3c24xx build] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PC100: Move External Interrupt definitionsJoonyoung Shim
This patch moves external interrupt definitions from mach/gpio.h to mach/regs-gpio.h for consistency with S5PV210. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PC100: Use generic S5P GPIO Interrupt interfaceJoonyoung Shim
S5PC100 SoC can use common S5P GPIO interrupt code. This patch removes specific S5PC100 gpio interrupts code and adds required defines and code to make use of common S5P code. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add support for GPIO InterruptMarek Szyprowski
S5PV210/S5PC110 can use common S5P GPIO interrupt code. This patch adds required defines and code to make use of it. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Add common S5P GPIO Interrupt supportMarek Szyprowski
This patch adds common code to enable support of GPIO interrupt on S5P SoCs. The total number of GPIO pins is quite large on S5P SoCs. Registering irq support for all of them would be a resource waste. Because of that the interrupt support for standard GPIO pins is registered dynamically by the s5p_register_gpio_interrupt() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Enable USB HSOTG gadget buildMarek Szyprowski
Add the necessary definitions and mapping information to enable the s3c-hsotg gadget to build. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Support for MMC regulators on GONI boardMarek Szyprowski
Add required platform definitions for MMC power regulators on Samsung Goni board. GPIO pin GONI_EXT_FLASH_EN has been transferred from machine startup code to fixed voltage regulator. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Support for OTG USB Gadget on GONI boardMarek Szyprowski
Add required platform definitions for s3c-hsotg driver to enable usb gadget support on Samsung Goni board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: fb setup for GONI - remove pixel clockMarek Szyprowski
Since commit 67a38950f0917aecfe1a3e46720d8bbb0020 there is no need to set pixel clock for the s3c-fb driver's window information. The correct pixel clock value can be automatically calculated from the other screen parameters. This patch removes the redundant pixel clock parameter. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: update framebuffer setup information for GONIMarek Szyprowski
Change the default upper_margin and vsync_len to get rid of repeated last line on the display. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Remove the unused clk_arm clock from plat-s5pThomas Abraham
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the armclk. So the clk_arm clock instance available in the plat-s5p clock code is not used in any of the S5P series SoCs. This patch removes the unused clk_arm instance from plat-s5p clock code. Reported-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P64XX: Remove redundant selection PLAT_S5P.Kukjin Kim
This patch removes redundant selection PLAT_S5P in the CPU_S5P64XX config. Because PLAT_S5P is selected if select ARCH_S5P64XX in the plat-s5p/Kconfig. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Remove redundant selection PLAT_S5P for S5PC100, S5PV210 and S5PV310Kyungmin Park
The selection PLAT_S5P is selected with plat-s5p/Kconfig. So remove it form each CPU_S5PXXXX config. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: edited title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV310: Place the common SPARSEMEM at ARCH_S5PV310Kyungmin Park
In case of S5PV310/S5PC210, it uses the SPARSEMEM as default memory configuration. So moved to ARCH_S5PV310 config. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: edited title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:32:40 +0000