summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-03-23s390/cpuinfo: show processor physical addressAlexander Gordeev
Show CPU physical address as reported by STAP instruction Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/mm: optimize page table upgrade routineAlexander Gordeev
There is a maximum of two new tables allocated on page table upgrade. Because we know that a loop the current implementation is based on could be unrolled with some improvements: * upgrade from 3 to 5 levels happens in one go - without an unnecessary re-take of page_table_lock in-between; * page tables initialization moved out of the atomic code; Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-11s390/config: do not select VIRTIO_CONSOLE via KconfigChristian Borntraeger
select does not ensure that dependencies are also selected. Instead of selecting VIRTIO_CONSOLE from S390_GUEST we should rather add this to the defconfigs. So we update those as well. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-11s390/traps: mark test_monitor_call __initHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-11s390/irq: make init_ext_interrupts staticHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-11s390/irq: replace setup_irq() by request_irq()afzal mohammed
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com> [heiko.carstens@de.ibm.com: replace pr_err with panic] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390/cpuinfo: add system topology informationAlexander Gordeev
This update adjusts /proc/cpuinfo format to meet some user level programs expectations. It also makes the layout consistent with x86 where CPU topology is presented as blocks of key-value pairs. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390: prevent leaking kernel address in BEARSven Schnelle
When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390: enable bpf jit by default when not built as always-onHeiko Carstens
This is the s390 variant of commit 81c22041d9f1 ("bpf, x86, arm64: Enable jit by default when not built as always-on"). Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390/cpum_cf: Add new extended counters for IBM z15Thomas Richter
Add CPU measurement counter facility event description for IBM z15. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390/pci: embedding hotplug_slot in zdevPierre Morel
Embedding the hotplug_slot in zdev structure allows to greatly simplify the hotplug handling by eliminating the handling of the slot_list. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-06s390/mm: cleanup phys_to_pfn() and friendsAlexander Gordeev
Make page, frame, virtual and physical address conversion macros more expressive by avoiding redundant definitions and defining new macros using existing ones. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: mark private defines for vm_fault_t as suchChristian Borntraeger
This fixes several sparse warnings for fault.c: arch/s390/mm/fault.c:336:36: warning: restricted vm_fault_t degrades to integer arch/s390/mm/fault.c:573:23: warning: incorrect type in assignment (different base types) arch/s390/mm/fault.c:573:23: expected restricted vm_fault_t [usertype] fault arch/s390/mm/fault.c:573:23: got int Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390/mm: remove fake numa supportHeiko Carstens
It turned out that fake numa support is rather useless on s390, since there are no scenarios where there is any performance or other benefit when used. However it does provide maintenance cost and breaks from time to time. Therefore remove it. CONFIG_NUMA is still supported with a very small backend and only one node. This way userspace applications which require NUMA interfaces continue to work. Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node), since there is quite a bit of kernel code which assumes that more than one node is possible if CONFIG_NUMA is enabled. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390/crypto: explicitly memzero stack key material in aes_s390.cTorsten Duwe
aes_s390.c has several functions which allocate space for key material on the stack and leave the used keys there. It is considered good practice to clean these locations before the function returns. Link: https://lkml.kernel.org/r/20200221165511.GB6928@lst.de Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lkml.kernel.org/r/20200221150612.GA9717@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-19s390/arch: install kernels with their proper version IDStefan Raspl
In case $INSTALLKERNEL is not available, we should install the kernel image with its version number, and save the previous one accordingly. Also, we're adding a hint so users know that they still need to perform one more configuration step (usually adjusting zipl config). Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-17s390/cpum_sf: Rework sampling buffer allocationThomas Richter
Adjust sampling buffer allocation depending on frequency and correct comments. Investigation on the interrupt handler revealed that almost always one interupt services one SDB, even when running with the maximum frequency of 100000. Very rarely there have been 2 SBD serviced per interrupt. Therefore reduce the number of SBD per CPU. Each SDB is one page in size. The new formula results in freq:4000 n_sdb:32 new:16 freq:10000 n_sdb:80 new:16 freq:20000 n_sdb:159 new:17 freq:40000 n_sdb:318 new:19 freq:50000 n_sdb:397 new:20 freq:62500 n_sdb:497 new:22 freq:83333 n_sdb:662 new:24 freq:100000 n_sdb:794 new:25 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bugfixes and improvements to selftests. On top of this, Mauro converted the KVM documentation to rst format, which was very welcome" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits) docs: virt: guest-halt-polling.txt convert to ReST docs: kvm: review-checklist.txt: rename to ReST docs: kvm: Convert timekeeping.txt to ReST format docs: kvm: Convert s390-diag.txt to ReST format docs: kvm: Convert ppc-pv.txt to ReST format docs: kvm: Convert nested-vmx.txt to ReST format docs: kvm: Convert mmu.txt to ReST format docs: kvm: Convert locking.txt to ReST format docs: kvm: Convert hypercalls.txt to ReST format docs: kvm: arm/psci.txt: convert to ReST docs: kvm: convert arm/hyp-abi.txt to ReST docs: kvm: Convert api.txt to ReST format docs: kvm: convert devices/xive.txt to ReST docs: kvm: convert devices/xics.txt to ReST docs: kvm: convert devices/vm.txt to ReST docs: kvm: convert devices/vfio.txt to ReST docs: kvm: convert devices/vcpu.txt to ReST docs: kvm: convert devices/s390_flic.txt to ReST docs: kvm: convert devices/mpic.txt to ReST docs: kvm: convert devices/arm-vgit.txt to ReST ...
2020-02-15Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes that have come in since the merge window: - Fix of PCI interrupt map on arm64 fast model (SW emulator) - Fixlet for sound on ST platforms and a small cleanup of deprecated DT properties - A stack buffer overflow fix for moxtet - Fuse driver build fix for Tegra194 - A few config updates to turn on new drivers merged this cycle" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: bus: moxtet: fix potential stack buffer overflow soc/tegra: fuse: Fix build with Tegra194 configuration ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 arm64: defconfig: Enable DRM_SUN6I_DSI arm64: defconfig: Enable CONFIG_SUN8I_THERMAL ARM: sunxi: Enable CONFIG_SUN8I_THERMAL arm64: defconfig: Set bcm2835-dma as built-in ARM: configs: Cleanup old Kconfig options ARM: npcm: Bring back GPIOLIB support arm64: dts: fast models: Fix FVP PCI interrupt-map property
2020-02-15Merge tag 's390-5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu). - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase card/queue requests counter to 64-bit in crypto code. - Fix clang warning in get_tod_clock. - Fix ultravisor info length extensions handling. - Fix style of SPDX License Identifier in vfio-ccw. - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio. * tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: crypto/testmgr: enable selftests for paes-s390 ciphers s390/time: Fix clk type in get_tod_clock s390/uv: Fix handling of length extensions s390/qdio: don't allocate *aob array with GFP_ATOMIC s390/qdio: simplify ACK tracking s390/zcrypt: fix card and queue total counter wrap s390/pkey: fix missing length of protected key on return vfio-ccw: Use the correct style for SPDX License Identifier
2020-02-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Fixes and HW enablement patches: - Tooling fixes, most of which are tooling header synchronization with v5.6 changes - Fix kprobes fallout on ARM - Add Intel Elkhart Lake support and extend Tremont support, these are relatively simple and should only affect those models - Fix the AMD family 17h generic event table" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) perf llvm: Fix script used to obtain kernel make directives to work with new kbuild tools headers kvm: Sync linux/kvm.h with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers x86: Sync disabled-features.h tools include UAPI: Sync sound/asound.h copy tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf tools: Add arm64 version of get_cpuid() tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers uapi: Sync linux/fscrypt.h with the kernel sources tools headers UAPI: Sync sched.h with the kernel perf trace: Resolve prctl's 'option' arg strings to numbers perf beauty prctl: Export the 'options' strarray tools headers UAPI: Sync prctl.h with the kernel sources tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources perf maps: Move kmap::kmaps setup to maps__insert() perf maps: Fix map__clone() for struct kmap perf maps: Mark ksymbol DSOs with kernel type perf maps: Mark module DSOs with kernel type tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd ...
2020-02-14Merge tag 'sti-dt-for-5.7-round1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes STi dt fixes: ------------- - remove deprecated Synopsys PHY dt properties - fix sound frame-inversion property * tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 Link: https://lore.kernel.org/r/afe20a6d-061b-a93c-2e60-206b0e8d0f81@st.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-12KVM: x86: fix WARN_ON check of an unsigned less than zeroPaolo Bonzini
The check cpu->hv_clock.system_time < 0 is redundant since system_time is a u64 and hence can never be less than zero. But what was actually meant is to check that the result is positive, since kernel_ns and v->kvm->arch.kvmclock_offset are both s64. Reported-by: Colin King <colin.king@canonical.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Addresses-Coverity: ("Macro compares unsigned to 0") Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86/mmu: Fix struct guest_walker arrays for 5-level pagingSean Christopherson
Define PT_MAX_FULL_LEVELS as PT64_ROOT_MAX_LEVEL, i.e. 5, to fix shadow paging for 5-level guest page tables. PT_MAX_FULL_LEVELS is used to size the arrays that track guest pages table information, i.e. using a "max levels" of 4 causes KVM to access garbage beyond the end of an array when querying state for level 5 entries. E.g. FNAME(gpte_changed) will read garbage and most likely return %true for a level 5 entry, soft-hanging the guest because FNAME(fetch) will restart the guest instead of creating SPTEs because it thinks the guest PTE has changed. Note, KVM doesn't yet support 5-level nested EPT, so PT_MAX_FULL_LEVELS gets to stay "4" for the PTTYPE_EPT case. Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: nVMX: Use correct root level for nested EPT shadow page tablesSean Christopherson
Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables. Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: nVMX: Fix some comment typos and coding styleMiaohe Lin
Fix some typos in the comments. Also fix coding style. [Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable field in struct kvm_vcpu_arch.] Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86/mmu: Avoid retpoline on ->page_fault() with TDPSean Christopherson
Wrap calls to ->page_fault() with a small shim to directly invoke the TDP fault handler when the kernel is using retpolines and TDP is being used. Single out the TDP fault handler and annotate the TDP path as likely to coerce the compiler into preferring it over the indirect function call. Rename tdp_page_fault() to kvm_tdp_page_fault(), as it's exposed outside of mmu.c to allow inlining the shim. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: apic: reuse smp_wmb() in kvm_make_request()Miaohe Lin
kvm_make_request() provides smp_wmb() so pending_events changes are guaranteed to be visible. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: remove duplicated KVM_REQ_EVENT requestMiaohe Lin
The KVM_REQ_EVENT request is already made in kvm_set_rflags(). We should not make it again. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven
The arm64 time code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Will Deacon <will@kernel.org>
2020-02-12KVM: x86: Deliver exception payload on KVM_GET_VCPU_EVENTSOliver Upton
KVM allows the deferral of exception payloads when a vCPU is in guest mode to allow the L1 hypervisor to intercept certain events (#PF, #DB) before register state has been modified. However, this behavior is incompatible with the KVM_{GET,SET}_VCPU_EVENTS ABI, as userspace expects register state to have been immediately modified. Userspace may opt-in for the payload deferral behavior with the KVM_CAP_EXCEPTION_PAYLOAD per-VM capability. As such, kvm_multiple_exception() will immediately manipulate guest registers if the capability hasn't been requested. Since the deferral is only necessary if a userspace ioctl were to be serviced at the same as a payload bearing exception is recognized, this behavior can be relaxed. Instead, opportunistically defer the payload from kvm_multiple_exception() and deliver the payload before completing a KVM_GET_VCPU_EVENTS ioctl. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: nVMX: Handle pending #DB when injecting INIT VM-exitOliver Upton
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will be populated if a VM-exit caused by an INIT signal takes priority over a debug-trap. Emulate this behavior when synthesizing an INIT signal VM-exit into L1. Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: Mask off reserved bit from #DB exception payloadOliver Upton
KVM defines the #DB payload as compatible with the 'pending debug exceptions' field under VMX, not DR6. Mask off bit 12 when applying the payload to DR6, as it is reserved on DR6 but not the 'pending debug exceptions' field. Fixes: f10c729ff965 ("kvm: vmx: Defer setting of DR6 until #DB delivery") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: do not reset microcode version on INIT or RESETPaolo Bonzini
Do not initialize the microcode version at RESET or INIT, only on vCPU creation. Microcode updates are not lost during INIT, and exact behavior across a warm RESET is not specified by the architecture. Since we do not support a microcode update directly from the hypervisor, but only as a result of userspace setting the microcode version MSR, it's simpler for userspace if we do nothing in KVM and let userspace emulate behavior for RESET as it sees fit. Userspace can tie the fix to the availability of MSR_IA32_UCODE_REV in the list of emulated MSRs. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-11Merge tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains ARM64 defconfig changes for v5.6, please pull the following: - Nicolas enables the BCM2835 DMA engine controller as built-in since the bcm2835 SD host controller depends on the DMA engine to be available. * tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: defconfig: Set bcm2835-dma as built-in Link: https://lore.kernel.org/r/20200210145621.22599-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-11Merge tag 'sunxi-config-for-5.6-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One patch to enable the new thermal sensor driver found on newer Allwinner SoCs. * tag 'sunxi-config-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: Enable CONFIG_SUN8I_THERMAL Link: https://lore.kernel.org/r/9d9805ea-cfe3-4eed-b977-1933a670ba7b.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-11Merge tag 'sunxi-config64-for-5.6-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two patches to enable the new thermal sensor driver found on newer Allwinner SoCs and to enable the MIPI-DSI controller. * tag 'sunxi-config64-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: Enable DRM_SUN6I_DSI arm64: defconfig: Enable CONFIG_SUN8I_THERMAL Link: https://lore.kernel.org/r/283eb531-890f-4ab2-95b5-898301af9807.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-11Merge tag 'v5.6-rc1' into arm/fixesOlof Johansson
Linux 5.6-rc1 Merging in to avoid fixes pull request diffstats being noisy due to being based on -rc1. Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-11Merge tag 'juno-fix-5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARMv8 Juno/Fast Models fix for v5.6 A single fix for PCI interrupt-mapping on FVP Rev C model. This is present since the platform was added. This fix is needed to get VFIO working correctly on this model. * tag 'juno-fix-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fast models: Fix FVP PCI interrupt-map property Link: https://lore.kernel.org/r/20200205183423.GF38466@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-11s390/time: Fix clk type in get_tod_clockNathan Chancellor
Clang warns: In file included from ../arch/s390/boot/startup.c:3: In file included from ../include/linux/elf.h:5: In file included from ../arch/s390/include/asm/elf.h:132: In file included from ../include/linux/compat.h:10: In file included from ../include/linux/time.h:74: In file included from ../include/linux/time32.h:13: In file included from ../include/linux/timex.h:65: ../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] get_tod_clock_ext(clk); ^~~ ../arch/s390/include/asm/timex.h:149:44: note: passing argument to parameter 'clk' here static inline void get_tod_clock_ext(char *clk) ^ Change clk's type to just be char so that it matches what happens in get_tod_clock_ext. Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes") Link: https://github.com/ClangBuiltLinux/linux/issues/861 Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-11s390/uv: Fix handling of length extensionsChristian Borntraeger
The query parameter block might contain additional information and can be extended in the future. If the size of the block does not suffice we get an error code of rc=0x100. The buffer will contain all information up to the specified size and the hypervisor/guest simply do not need the additional information as they do not know about the new data. That means that we can (and must) accept rc=0x100 as success. Cc: stable@vger.kernel.org Reviewed-by: Cornelia Huck <cohuck@redhat.com> Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-11ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsiKuninori Morimoto
frame-inversion is "flag" not "uint32". This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-11ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260Patrice Chotard
Remove "snps,phy-bus-name", "snps,phy-bus-id" and "snps,phy-addr" properties which are deprecated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-11perf/x86/intel: Fix inaccurate period in context switch for auto-reloadKan Liang
Perf doesn't take the left period into account when auto-reload is enabled with fixed period sampling mode in context switch. Here is the MSR trace of the perf command as below. (The MSR trace is simplified from a ftrace log.) #perf record -e cycles:p -c 2000000 -- ./triad_loop //The MSR trace of task schedule out //perf disable all counters, disable PEBS, disable GP counter 0, //read GP counter 0, and re-enable all counters. //The counter 0 stops at 0xfffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value fffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff //The MSR trace of the same task schedule in again //perf disable all counters, enable and set GP counter 0, //enable PEBS, and re-enable all counters. //0xffffffe17b80 (-2000000) is written to GP counter 0. write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80 write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff When the same task schedule in again, the counter should starts from previous left. However, it starts from the fixed period -2000000 again. A special variant of intel_pmu_save_and_restart() is used for auto-reload, which doesn't update the hwc->period_left. When the monitored task schedules in again, perf doesn't know the left period. The fixed period is used, which is inaccurate. With auto-reload, the counter always has a negative counter value. So the left period is -value. Update the period_left in intel_pmu_save_and_restart_reload(). With the patch: //The MSR trace of task schedule out write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value ffffffe25cbc write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff //The MSR trace of the same task schedule in again write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
2020-02-11perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event mapKim Phillips
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"), claimed L2 misses were unsupported, due to them not being found in its referenced documentation, whose link has now moved [1]. That old documentation listed PMCx064 unit mask bit 3 as: "LsRdBlkC: LS Read Block C S L X Change to X Miss." and bit 0 as: "IcFillMiss: IC Fill Miss" We now have new public documentation [2] with improved descriptions, that clearly indicate what events those unit mask bits represent: Bit 3 now clearly states: "LsRdBlkC: Data Cache Req Miss in L2 (all types)" and bit 0 is: "IcFillMiss: Instruction Cache Req Miss in L2." So we can now add support for L2 misses in perf's genericised events as PMCx064 with both the above unit masks. [1] The commit's original documentation reference, "Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors", originally available here: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf is now available here: https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf [2] "Processor Programming Reference (PPR) for Family 17h Model 31h, Revision B0 Processors", available here: https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h") Reported-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Babu Moger <babu.moger@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com
2020-02-11perf/x86/msr: Add Tremont supportKan Liang
Tremont is Intel's successor to Goldmont Plus. SMI_COUNT MSR is also supported. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/1580236279-35492-3-git-send-email-kan.liang@linux.intel.com
2020-02-11perf/x86/cstate: Add Tremont supportKan Liang
Tremont is Intel's successor to Goldmont Plus. From the perspective of Intel cstate residency counters, there is nothing changed compared with Goldmont Plus and Goldmont. Share glm_cstates with Goldmont Plus and Goldmont. Update the comments for Tremont. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/1580236279-35492-2-git-send-email-kan.liang@linux.intel.com
2020-02-11perf/x86/intel: Add Elkhart Lake supportKan Liang
Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU, there is nothing changed compared with Jacobsville. Share the perf code with Jacobsville. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lkml.kernel.org/r/1580236279-35492-1-git-send-email-kan.liang@linux.intel.com
2020-02-11arm/patch: Fix !MMU compilePeter Zijlstra
Now that patch.o is unconditionally selected for ftrace, it can also get compiled for !MMU kernels. These (obviously) lack {set,clear}_fixmap() support. Also remove the superfluous __acquire/__release nonsense. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-23 22:33:53 +0000