summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Three fixes across arch/mips with the most complex one being the GIC interrupt fix - at nine lines still not monster. I'm confident this are the final MIPS patches even if there should go for an rc8" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: fix return value check in rt_timer_probe() MIPS: malta: Fix GIC interrupt offsets MIPS: Perf: Fix 74K cache map
2013-11-02ARC: Incorrect mm reference used in vmalloc fault handlerVineet Gupta
A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current task's "active_mm". ARC vmalloc fault handler however was using mm. A vmalloc fault for non user task context (actually pre-userland, from init thread's open for /dev/console) caused the handler to deref NULL mm (for mm->pgd) The reasons it worked so far is amazing: 1. By default (!SMP), vmalloc fault handler uses a cached value of PGD. In SMP that MMU register is repurposed hence need for mm pointer deref. 2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in pre-userland code path - it was introduced with commit 20bafb3d23d108bc "n_tty: Move buffers into n_tty_data" Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Noam Camus <noamc@ezchip.com> Cc: stable@vger.kernel.org #3.10 and 3.11 Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two fixes: - Fix 'NMI handler took too long to run' false positives [ Genuine NMI overhead speedups will come for v3.13, this commit only fixes a measurement bug ] - Fix perf ring-buffer missed barrier causing (rare) ring-buffer data corruption on ppc64" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix NMI measurements perf: Fix perf ring buffer memory ordering
2013-10-31MIPS: ralink: fix return value check in rt_timer_probe()Wei Yongjun
In case of error, the function devm_request_and_ioremap() returns NULL pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead of devm_request_and_ioremap(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: John Crispin <blogic@openwrt.org> Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6098/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds
Merge three fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memcg: use __this_cpu_sub() to dec stats to avoid incorrect subtrahend casting percpu: fix this_cpu_sub() subtrahend casting for unsigneds mm/pagewalk.c: fix walk_page_range() access of wrong PTEs
2013-10-30percpu: fix this_cpu_sub() subtrahend casting for unsignedsGreg Thelen
this_cpu_sub() is implemented as negation and addition. This patch casts the adjustment to the counter type before negation to sign extend the adjustment. This helps in cases where the counter type is wider than an unsigned adjustment. An alternative to this patch is to declare such operations unsupported, but it seemed useful to avoid surprises. This patch specifically helps the following example: unsigned int delta = 1 preempt_disable() this_cpu_write(long_counter, 0) this_cpu_sub(long_counter, delta) preempt_enable() Before this change long_counter on a 64 bit machine ends with value 0xffffffff, rather than 0xffffffffffffffff. This is because this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta), which is basically: long_counter = 0 + 0xffffffff Also apply the same cast to: __this_cpu_sub() __this_cpu_sub_return() this_cpu_sub_return() All percpu_test.ko passes, especially the following cases which previously failed: l -= ui_one; __this_cpu_sub(long_counter, ui_one); CHECK(l, long_counter, -1); l -= ui_one; this_cpu_sub(long_counter, ui_one); CHECK(l, long_counter, -1); CHECK(l, long_counter, 0xffffffffffffffff); ul -= ui_one; __this_cpu_sub(ulong_counter, ui_one); CHECK(ul, ulong_counter, -1); CHECK(ul, ulong_counter, 0xffffffffffffffff); ul = this_cpu_sub_return(ulong_counter, ui_one); CHECK(ul, ulong_counter, 2); ul = __this_cpu_sub_return(ulong_counter, ui_one); CHECK(ul, ulong_counter, 1); Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Fixes for the 3.12 debugfs problem - removing the duplicate directory name, and using a better the error code" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: use a more sensible error number when debugfs directory creation fails KVM: Fix modprobe failure for kvm_intel/kvm_amd
2013-10-30uml: check length in exitcode_proc_write()Dan Carpenter
We don't cap the size of buffer from the user so we could write past the end of the array here. Only root can write to this file. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30MIPS: malta: Fix GIC interrupt offsetsMarkos Chandras
The GIC interrupt offsets are calculated based on the value of NR_CPUS. However, this is wrong because NR_CPUS may or may not contain the real number of the actual cpus present in the system. We fix that by using the 'nr_cpu_ids' variable which contains the real number of cpus in the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if NR_CPUS was > 8 with the following errors: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5 Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053 807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000 00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4 807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0 ... Call Trace: [<801098c0>] show_stack+0x64/0x7c [<8049c6b0>] dump_stack+0x64/0x84 [<8012efc4>] warn_slowpath_common+0x84/0xb4 [<8012f00c>] warn_slowpath_null+0x18/0x24 [<80173218>] __irq_set_handler+0x15c/0x164 [<80587cf4>] arch_init_ipiirq+0x2c/0x3c [<805880c8>] arch_init_irq+0x3c4/0x4bc [<80588e28>] init_IRQ+0x3c/0x50 [<805847e8>] start_kernel+0x230/0x3d8 ---[ end trace 4eaa2a86a8e2da26 ]--- This is now fixed and the Malta board can boot with any NR_CPUS value which also helps supporting more processors in a single kernel binary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30KVM: Fix modprobe failure for kvm_intel/kvm_amdTim Gardner
The x86 specific kvm init creates a new conflicting debugfs directory which causes modprobe issues with kvm_intel and kvm_amd. For example, sudo modprobe kvm_amd modprobe: ERROR: could not insert 'kvm_amd': Bad address The simplest fix is to just rename the directory. The following KVM config options are set: CONFIG_KVM_GUEST=y CONFIG_KVM_DEBUG_FS=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_KVM_DEVICE_ASSIGNMENT=y Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Change debugfs directory name. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-29MIPS: Perf: Fix 74K cache mapDeng-Cheng Zhu
According to Software User's Manual, the event of last-level-cache read/write misses is mapped to even counters. Odd counters of that event number count miss cycles. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6036/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29perf/x86: Fix NMI measurementsPeter Zijlstra
OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-28Merge tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa patchset from Chris Zankel: "The main patch fixes a bug that can cause a kernel panic, and was introduced in rc1. The other two have been discovered by a uclibc test and 'coccinelle'" * tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux: xtensa: Cocci spatch "noderef" xtensa: don't use alternate signal stack on threads xtensa: fix fast_syscall_spill_registers_fixup
2013-10-27parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAMHelge Deller
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were not able to bring up other CPUs than the monarch CPU and instead crashed the kernel. The reason was unclear, esp. since it involved various machines (e.g. J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened when less than 4GB were installed, or if a 32bit Linux kernel was booted. In the end, the fix for those SMP problems is trivial: During the early phase of the initialization of the CPUs, including the monarch CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called. It's documented that this firmware function may clobber various registers, and one one of those possibly clobbered registers is %cr30 which holds the task thread info pointer. Now, if %cr30 would always have been clobbered, then this bug would have been detected much earlier. But lots of testing finally showed, that - at least for %cr30 - on some machines only the upper 32bits of the 64bit register suddenly turned zero after the firmware call. So, after finding the root cause, the explanation for the various crashes became clear: - On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this problem. - Monarch CPUs in 64bit mode always booted sucessfully, because the inital task thread info pointer was below 4GB. - Secondary CPUs booted sucessfully on machines with less than 4GB RAM because the upper 32bit were zero anyay. - Secondary CPus failed to boot if we had more than 4GB RAM and the task thread info pointer was located above the 4GB boundary. Finally, the patch to fix this problem is trivial by saving the %cr30 register before the firmware call and restoring it afterwards. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 2.6.12+ Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-25Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "There's really only one bugfix in this branch, which is a fix for timers on the integrator platform. Since Linus Walleij is resurrecting support for the platform it seems valuable to get the fix into 3.12 even though the regression has been around a while. The rest are a handful of maintainers updates. If you prefer to hold those until 3.13 then just merge the first patch on the branch which is the fix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add maintainers entry for Rockchip SoCs MAINTAINERS: Tegra updates, and driver ownership MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth ARM: integrator: deactivate timer0 on the Integrator/CP
2013-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Several last minute bug fixes. Two of them are on the larger side for rc7, the dasd format patch for older storage devices and the store-clock-fast patch where we have been to optimistic with an optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time: correct use of store clock fast s390/vmlogrdr: fix array access in vmlogrdr_open() s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() s390/dasd: check for availability of prefix command during format s390/mm,kvm: fix software dirty bits vs. kvm for old machines
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
2013-10-22s390/time: correct use of store clock fastMartin Schwidefsky
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy. It can happen that the value stored on one CPU is smaller than the value stored on another CPU, although the order of the stores is the other way around. This can cause deltas of get_tod_clock() values to become negative when they should not be. We need to be more careful with store-clock-fast, this patch partially reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time: always use stckf instead of stck if available". The get_tod_clock() function now uses the store-clock-extended (STCKE) instruction. get_tod_clock_fast() can be used if the fuzziness of store-clock-fast is acceptable e.g. for wait loops local to a CPU. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-19parisc: enable DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD in defconfigsHelge Deller
Latest udev requires that DEVTMPFS and DEVTMPFS_MOUNT are enabled, else initrd will fail to find root filesystem. Enable missing BLK_DEV_INITRD for B180 and C3000 machines. Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-19Revert "parisc: Export flush_cache_page() (needed by lustre)"Helge Deller
This reverts commit 320c90be7ba1c371e882edff57272a89b213d136. Christoph Hellwig <hch@infradead.org> commented: This one shouldn't go in - Geert sent it a bit prematurely, as Lustre shouldn't use it just to reimplement core VM functionality (which it shouldn't use either, but that's a separate story). Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixlets: - fix a (rare-config) build bug - fix a next-gen SGI/UV hw/firmware enumeration bug" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Update UV3 hub revision ID x86/microcode: Correct Kconfig dependencies
2013-10-16xtensa: Cocci spatch "noderef"Thomas Meyer
sizeof when applied to a pointer typed expression gives the size of the pointer. Found by coccinelle spatch "misc/noderef.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-15Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree fixes and reverts from Grant Likely: "One bug fix and three reverts. The reverts back out the slightly controversial feeding the entire device tree into the random pool and the reserved-memory binding which isn't fully baked yet. Expect the reserved-memory patches at least to resurface for v3.13. The bug fixes removes a scary but harmless warning on SPARC that was introduced in the v3.12 merge window. v3.13 will contain a proper fix that makes the new code work on SPARC. On the plus side, the diffstat looks *awesome*. I love removing lines of code" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: Revert "drivers: of: add initialization code for dma reserved memory" Revert "ARM: init: add support for reserved memory defined by device tree" Revert "of: Feed entire flattened device tree into the random pool" of: fix unnecessary warning on missing /cpus node
2013-10-15Merge branch 'fixes-for-v3.12' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fix from Marek Szyprowski: "A bugfix for the IOMMU-based implementation of dma-mapping subsystem for ARM architecture" * 'fixes-for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Always pass proper prot flags to iommu_map()
2013-10-15Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fix from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Enable pvspinlock after jump_label_init() to avoid VM hang
2013-10-15Merge tag 'stable/for-linus-3.12-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Stefano Stabellini: "A small fix for Xen on x86_32 and a build fix for xen-tpmfront on arm64" * tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix possible user space selector corruption tpm: xen-tpmfront: fix missing declaration of xen_domain
2013-10-15xtensa: don't use alternate signal stack on threadsBaruch Siach
According to create_thread(3): "The new thread does not inherit the creating thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack corruption among cloned threads), current->sas_ss_size is set to 0 for cloned processes sharing VM with their parent. Don't use the (nonexistent) alternate signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA] Remove non-rt signal handling). Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc. Cc: <stable@vger.kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-15xtensa: fix fast_syscall_spill_registers_fixupMax Filippov
fast_syscall_spill_registers_fixup was not correctly updated by the 'keep a3 and excsave1 on entry to exception handlers' patch: it doesn't preserve a3 that it gets on entry, breaking _spill_registers in case of page fault on stack during register spilling, leading to unhandled exception in kernel mode. Preserve a3 by saving it in the original _spill_registers stack frame's a3 during exception handling and restoring it afterwards. Also fix comments and function bounds annotations. Reported-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-15s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32()Heiko Carstens
The return value of copy_siginfo_(to|from)_user32() gets passed to user space, however we do not convert a positive return value from copy_(to|from)_user to -EFAULT. Therefore these functions (and the calling system calls) my incorrectly return a positive number (bytes not copied) instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15s390/mm,kvm: fix software dirty bits vs. kvm for old machinesMartin Schwidefsky
For machines without enhanced supression on protection the software dirty bit code forces the pte dirty bit and clears the page protection bit in pgste_set_pte. This is done for all pte types, the check for present ptes is missing. As a result swap ptes and other not-present ptes can get corrupted. Add a check for the _PAGE_PRESENT bit to pgste_set_pte before modifying the pte value. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15KVM: Enable pvspinlock after jump_label_init() to avoid VM hangRaghavendra K T
We use jump label to enable pv-spinlock. With the changes in (442e0973e927 Merge branch 'x86/jumplabel'), the jump label behaviour has changed that would result in eventual hang of the VM since we would end up in a situation where slow path locks would halt the vcpus but we will not be able to wakeup the vcpu by lock releaser using unlock kick. Similar problem in Xen and more detailed description is available in a945928ea270 (xen: Do not enable spinlocks before jump_label_init() has executed) This patch splits kvm_spinlock_init to separate jump label changes with pvops patching and also make jump label enabling after jump_label_init(). Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-15Revert "ARM: init: add support for reserved memory defined by device tree"Marek Szyprowski
This reverts commit 10bcdfb8ba24760f715f0a700c3812747eddddf5. There is no consensus on the bindings for the reserved memory, so the code for handing it will be reverted. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-10-15x86: Update UV3 hub revision IDRuss Anderson
The UV3 hub revision ID is different than expected. The first revision was supposed to start at 1 but instead will start at 0. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: <stable@kernel.org> # v3.9, v3.10, v3.11 Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-14Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Some more ARM fixes, nothing particularly major here. The biggest change is to fix the SMP_ON_UP code so that it works with TI's Aegis cores" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7851/1: check for number of arguments in syscall_get/set_arguments() ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices ARM: 7843/1: drop asm/types.h from generic-y ARM: 7842/1: MCPM: don't explode if invoked without being initialized first
2013-10-14x86/microcode: Correct Kconfig dependenciesBorislav Petkov
I have a randconfig here which has enabled only CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y with both # CONFIG_MICROCODE_INTEL is not set # CONFIG_MICROCODE_AMD is not set off. Which makes building the microcode functionality a little pointless. Don't do that in such cases then. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1381682189-14470-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-13ARM: integrator: deactivate timer0 on the Integrator/CPLinus Walleij
This fixes a long-standing Integrator/CP regression from commit 870e2928cf3368ca9b06bc925d0027b0a56bcd8e "ARM: integrator-cp: convert use CLKSRC_OF for timer init" When this code was introduced, the both aliases pointing the system to use timer1 as primary (clocksource) and timer2 as secondary (clockevent) was ignored, and the system would simply use the first two timers found as clocksource and clockevent. However this made the system timeline accelerate by a factor x25, as it turns out that the way the clocking actually works (totally undocumented and found after some trial-and-error) is that timer0 runs @ 25MHz and timer1 and timer2 runs @ 1MHz. Presumably this divider setting is a boot-on default and configurable albeit the way to configure it is not documented. So as a quick fix to the problem, let's mark timer0 as disabled, so the code will chose timer1 and timer2 as it used to. This also deletes the two aliases for the primary and secondary timer as they have been superceded by the auto-selection Cc: stable@vger.kernel.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13ARM: 7851/1: check for number of arguments in syscall_get/set_arguments()AKASHI Takahiro
In ftrace_syscall_enter(), syscall_get_arguments(..., 0, n, ...) if (i == 0) { <handle ORIG_r0> ...; n--;} memcpy(..., n * sizeof(args[0])); If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in syscall_get_arguments(), none of arguments should be copied by memcpy(). Otherwise 'n--' can be a big positive number and unexpected amount of data will be copied. Tracing system calls which take no argument, say sync(void), may hit this case and eventually make the system corrupted. This patch fixes the issue both in syscall_get_arguments() and syscall_set_arguments(). Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-13ARM: exynos: dts: Update 5250 arch timer node with clock frequencyYuvaraj Kumar C D
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-against-v3.12-rc3-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13parisc: let probe_kernel_read() capture access to page zeroHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: optimize variable initialization in do_page_faultJohn David Anglin
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: fix interruption handler to respect pagefault_disable()Helge Deller
Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: mark parisc_terminate() noreturn and cold.Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: remove unused syscall_ipi() function.Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: kill SMP single function call interruptJiang Liu
Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: Export flush_cache_page() (needed by lustre)Geert Uytterhoeven
ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-12Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull gcc "asm goto" miscompilation workaround from Ingo Molnar: "This is the fix for the GCC miscompilation discussed in the following lkml thread: [x86] BUG: unable to handle kernel paging request at 00740060 The bug in GCC has been fixed by Jakub and the fix will be part of the GCC 4.8.2 release expected to be released next week - so the quirk's version test checks for <= 4.8.1. The quirk is only added to compiler-gcc4.h and not to the higher level compiler.h because all asm goto uses are behind a feature check" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compiler/gcc4: Add quirk for 'asm goto' miscompilation bug
2013-10-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A build fix and a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add reboot quirk for Dell Latitude E5410 x86, build, pci: Fix PCI_MSI build on !SMP
2013-10-12Merge tag 'arc-fixes-for-3.12-part3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Fix for broken gdb 'jump'" * tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 11:18:43 +0000