| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
As we have a sane show_stack() now, we can drop
the ->saved_task hack.
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
As UML uses an alternative signal stack we cannot use
the current stack pointer for stack dumping if UML itself
dies by SIGSEGV. To bypass this issue we save regs taken
from mcontext in our segv handler into thread_struct and
use these regs to obtain the stack pointer in show_stack().
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Currently on UML stack traces are not very reliable and both
x86 and x86_64 have their on implementations.
This patch unifies both and adds support to outline unreliable
functions calls.
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Using virt_to_phys on percpu mappings is horribly wrong as it may be
backed by vmalloc. Introduce kvm_kaddr_to_phys which translates both
types of valid kernel addresses to the corresponding physical address.
At the same time resolves a typing issue where we were storing the
physical address as a 32 bit unsigned long (on arm), truncating the
physical address for addresses above the 4GB limit. This caused
breakage on Keystone.
Cc: <stable@vger.kernel.org> [3.10+]
Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Introduced by 3ddc5b46a8e90f3c92 ("kernel-wide: fix missing validations
on __get/__put/__copy_to/__copy_from_user()").
Also fix some other places which could be problematic in a similar way,
although they hadn't been proved so, as far as I can tell.
Cc: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Vince's perf fuzzer uncovered the following issue on Alpha:
Unable to handle kernel paging request at virtual address fffffbfe4e46a0e8
CPU 0 perf_fuzzer(1278): Oops 0
pc = [<fffffc000031fbc0>] ra = [<fffffc000031ff54>] ps = 0007 Not tainted
pc is at alpha_perf_event_set_period+0x60/0xf0
ra is at alpha_pmu_enable+0x1a4/0x1c0
v0 = 0000000000000000 t0 = 00000000000fffff t1 = fffffc007b3f5800
t2 = fffffbff275faa94 t3 = ffffffffc9b9bd89 t4 = fffffbfe4e46a098
t5 = 0000000000000020 t6 = fffffbfe4e46a0b8 t7 = fffffc007f4c8000
s0 = 0000000000000000 s1 = fffffc0001b0c018 s2 = fffffc0001b0c020
s3 = fffffc007b3f5800 s4 = 0000000000000001 s5 = ffffffffc9b9bd85
s6 = 0000000000000001
a0 = 0000000000000006 a1 = fffffc007b3f5908 a2 = fffffbfe4e46a098
a3 = 00000005000108c0 a4 = 0000000000000000 a5 = 0000000000000000
t8 = 0000000000000001 t9 = 0000000000000001 t10= 0000000027829f6f
t11= 0000000000000020 pv = fffffc000031fb60 at = fffffc0000950900
gp = fffffc0000940900 sp = fffffc007f4cbca8
Disabling lock debugging due to kernel taint
Trace:
[<fffffc000031ff54>] alpha_pmu_enable+0x1a4/0x1c0
[<fffffc000039f4e8>] perf_pmu_enable+0x48/0x60
[<fffffc00003a0d6c>] __perf_install_in_context+0x15c/0x230
[<fffffc000039d1f0>] remote_function+0x80/0xa0
[<fffffc00003a0c10>] __perf_install_in_context+0x0/0x230
[<fffffc000037b7e4>] smp_call_function_single+0x1b4/0x1d0
[<fffffc000039bb70>] task_function_call+0x60/0x80
[<fffffc00003a0c10>] __perf_install_in_context+0x0/0x230
[<fffffc000039bb44>] task_function_call+0x34/0x80
[<fffffc000039d3fc>] perf_install_in_context+0x9c/0x150
[<fffffc00003a0c10>] __perf_install_in_context+0x0/0x230
[<fffffc00003a5100>] SYSC_perf_event_open+0x360/0xac0
[<fffffc00003110c4>] entSys+0xa4/0xc0
This is due to the raw event encoding being used as an index directly
into the ev67_mapping array, rather than being validated against the
ev67_pmc_event_type enumeration instead. Unlike other architectures,
which allow raw events to propagate into the hardware counters with
little interference, the limited number of events on Alpha and the
strict event <-> counter relationships mean that raw events actually
correspond to the Linux-specific Alpha events, rather than anything
defined by the architecture.
This patch adds a new callback to alpha_pmu_t for validating the raw
event encoding with the Linux event types for the PMU, preventing the
out-of-bounds array access.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
QEMU provides a high-resolution timer and alarm; use this for
a clock source and clock event source when available.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This allows us to get rid of some hacky code for SMP. Get rid of
some cycle counter hackery that's now handled by generic code via
clocksource + clock_event_device objects.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Don't depend on SMP, just check the number of processors online.
This allows a single distribution kernel to use the clocksource
when run on a single processor machine. Do depend on whether or
not we're using WTINT.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Discontinue use of GENERIC_CMOS_UPDATE; rely on the RTC subsystem.
The marvel platform requires that the rtc only be touched from the
boot cpu. This had been partially implemented with hooks for
get/set_rtc_time, but read/update_persistent_clock were not handled.
Move the hooks from the machine_vec to a special rtc_class_ops struct.
We had read_persistent_clock managing the epoch against which the
rtc hw is based, but this didn't apply to get_rtc_time or set_rtc_time.
This resulted in incorrect values when hwclock(8) gets involved.
Allow the epoch to be set from the kernel command-line, overriding
the autodetection, which is doomed to fail in 2020. Further, by
implementing the rtc ioctl function, we can expose this epoch to
userland.
Elide the alarm functions that RTC_DRV_CMOS implements. This was
highly questionable on Alpha, since the interrupt is used by the
system timer.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Use WTINT to wait for the next interrupt. Squash the WTINT call
if the PALcode doesn't support it (e.g. MILO). No attempt is yet
made to skip clock ticks during normal scheduling in order to stay
in power down mode longer.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
With the 1024Hz default, we spend 50% of QEMU emulation
processing timer interrupts.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
When building a generic kernel, do a run-time check on the serial
number, like we do for MILO. When building a custom kernel, make
this a configure-time check.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Compiling with GCC 4.8 yields several instances of
crypto/vmac.c: In function ‘vmac_final’:
crypto/vmac.c:616:9: warning: value computed is not used [-Wunused-value]
memset(&mac, 0, sizeof(vmac_t));
^
arch/alpha/include/asm/string.h:31:25: note: in definition of macro ‘memset’
? __builtin_memset((s),0,(n)) \
^
Converting the macro to an inline function eliminates this problem.
However, doing only that causes problems with the GCC 3.x series. The
inline function cannot be named "memset", as otherwise we wind up with
recursion via __builtin_memset. Solve this by adjusting the symbols
such that __memset is the inline, and ___memset is the real function.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A first set of batches of fixes for 3.13. The diffstat is large
mostly because we're adding a defconfig for a family that's been
lacking it, and there's some missing clock information added for i.MX
and OMAP.
The at91 new code is around dealing with RTC/RTT reset at boot to fix
possible hangs due to pending wakeup interrupts coming in during early
boot"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
doc: devicetree: Add bindings documentation for omap-des driver
ARM: dts: doc: Document missing compatible property for omap-sham driver
ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
ARM: at91: fix hanged boot due to early rtt-interrupt
ARM: at91: fix hanged boot due to early rtc-interrupt
video: exynos_mipi_dsim: Remove unused variable
ARM: highbank: only select errata 764369 if SMP
ARM: sti: only select errata 764369 if SMP
ARM: tegra: init fuse before setting reset handler
ARM: vt8500: add defconfig for v6/v7 chips
ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD
ARM: OMAP: devicetree: fix SPI node compatible property syntax items
pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
MAINTAINERS: drop discontinued mailing list
ARM: dts: i.MX51: Fix OTG PHY clock
ARM: imx: set up pllv3 POWER and BYPASS sequentially
ARM: imx: pllv3 needs relock in .set_rate() call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"This batch of changes is mostly clean ups and small bug fixes. The
only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the
function graph tracer and not trace particular functions and their
call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included all
the changes to get that working, and I pulled that into my tree in
order to complete the perf function tracing fix"
* tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add rcu annotation for syscall trace descriptors
tracing: Do not use signed enums with unsigned long long in fgragh output
tracing: Remove unused function ftrace_off_permanent()
tracing: Do not assign filp->private_data to freed memory
tracing: Add helper function tracing_is_disabled()
tracing: Open tracer when ftrace_dump_on_oops is used
tracing: Add support for SOFT_DISABLE to syscall events
tracing: Make register/unregister_ftrace_command __init
tracing: Update event filters for multibuffer
recordmcount.pl: Add support for __fentry__
ftrace: Have control op function callback only trace when RCU is watching
rcu: Do not trace rcu_is_watching() functions
ftrace/x86: skip over the breakpoint for ftrace caller
trace/trace_stat: use rbtree postorder iteration helper instead of opencoding
ftrace: Add set_graph_notrace filter
ftrace: Narrow down the protected area of graph_lock
ftrace: Introduce struct ftrace_graph_data
ftrace: Get rid of ftrace_graph_filter_enabled
tracing: Fix potential out-of-bounds in trace_get_user()
tracing: Show more exact help information about snapshot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm changes from Thierry Reding:
"Mostly bug fixes and clean up. There is a new driver, which is
actually moving a custom PWM driver from drivers/misc.
The majority of the patches are enhancements to the device tree
support in the pwm-backlight driver. Backlights can now additionally
be powered using a regulator and enabled using a GPIO in addition to
just the PWM input"
* tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
Documentation/pwm: Update supported SoC name for pwm-samsung
pwm: samsung: Fix kernel warning while unexporting a channel
MAINTAINERS: Move PWM subsystem tree to kernel.org
Documentation/pwm: Fix trivial typos
pwm-backlight: Remove unused variable
pwm_backlight: avoid short blank screen while doing hibernation
pwm-backlight: Fix brightness adjustment
pwm: add ep93xx PWM support
pwm-backlight: Allow for non-increasing brightness levels
pwm-backlight: Add power supply support
pwm-backlight: Use new enable_gpio field
unicore32: Initialize PWM backlight enable_gpio field
ARM: shmobile: Initialize PWM backlight enable_gpio field
ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
ARM: pxa: Initialize PWM backlight enable_gpio field
ARM: OMAP: Initialize PWM backlight enable_gpio field
pwm-backlight: Add optional enable GPIO
pwm-backlight: Track enable state
pwm-backlight: Refactor backlight power on/off
pwm-backlight: Improve readability
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan
1/ Bartlomiej and Dan finalized a rework of the dma address unmap
implementation.
2/ In the course of testing 1/ a collection of enhancements to dmatest
fell out. Notably basic performance statistics, and fixed / enhanced
test control through new module parameters 'run', 'wait', 'noverify',
and 'verbose'. Thanks to Andriy and Linus for their review.
3/ Testing the raid related corner cases of 1/ triggered bugs in the
recently added 16-source operation support in the ioatdma driver.
4/ Some minor fixes / cleanups to mv_xor and ioatdma.
Conflicts:
drivers/dma/dmatest.c
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Rename simple_delete_dentry() to always_delete_dentry() and export it.
Export simple_dentry_operations, while we are at it, and get rid of
their duplicates
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Updates for the input subsystem. You will get an new drivers for
Hyper-V synthetic keyboard and for Neonode zForce touchscreens, plus a
bunch of driver fixes and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (49 commits)
Revert "Input: ALPS - add support for model found on Dell XT2"
arm: dts: am335x sk: add touchscreen support
Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding
Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe()
Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe()
Input: tnetv107x-keypad - make irqs signed for error handling
Input: add driver for Neonode zForce based touchscreens
Input: sh_keysc - enable the driver on all ARM platforms
Input: remove a redundant max() call
Input: mousedev - allow disabling even without CONFIG_EXPERT
Input: allow deselecting serio drivers even without CONFIG_EXPERT
Input: i8042 - add PNP modaliases
Input: evdev - fall back to vmalloc for client event buffer
Input: cypress_ps2 - do not consider data bad if palm is detected
Input: cypress_ps2 - remove useless cast
Input: fix PWM-related undefined reference errors
Input: ALPS - change secondary device's name
Input: wacom - not all multi-interface devices support touch
Input: nspire-keypad - add missing clk_disable_unprepare() on error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few clock fixes, a runtime PM fix, and pinctrl-single fix along
with few other fixes that popped up during the merge window.
* tag 'omap-for-v3.13/fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
doc: devicetree: Add bindings documentation for omap-des driver
ARM: dts: doc: Document missing compatible property for omap-sham driver
ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
ARM: OMAP: devicetree: fix SPI node compatible property syntax items
pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
+ sync with newer trunk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux
Pull blackfin updates from Steven Miao:
"Blackfin gpio changes, add adi pinctrl driver, and bug fixes"
* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
blackfin: fix build warning for unused variable
smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive
pm: use GFP_ATOMIC when pm core call this function
blackfin: serial: Add serial port_fer and port_mux early platform resources.
blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2
blackfin: adi gpio driver and pinctrl driver support
bf609: update default config for spi
Blackfin: bfin_gpio: Use proper mask for comparing pfunc
|
|
Pull OpenRISC updates from Jonas Bonn:
- small cleanups to make allmodconfig pass
- defconfig refresh
- a handful of code sanitization patches
* tag 'for-3.13' of git://git.openrisc.net/~jonas/linux:
openrisc: Refactor or32_early_setup()
openrisc: Remove unused declaration of __initramfs_start
openrisc: Use the declarations provided by <asm/sections.h>
openrisc: Refresh or1ksim_defconfig for v3.12
openrisc: Refactor 16-bit constant relocation
openrisc: include: asm: Kbuild: add default "vga.h"
openrisc: Makefile: append "-D__linux__" to KBUILD_CFLAGS
|
|
Pull Kconfig cleanups from Mark Salter:
"Remove some unused config options from C6X and clean up PC_PARPORT
dependencies. The latter was discussed here:
https://lkml.org/lkml/2013/10/8/12"
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
c6x: remove unused COMMON_CLKDEV Kconfig parameter
Kconfig cleanup (PARPORT_PC dependencies)
x86: select ARCH_MIGHT_HAVE_PC_PARPORT
unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT
sparc: select ARCH_MIGHT_HAVE_PC_PARPORT
sh: select ARCH_MIGHT_HAVE_PC_PARPORT
powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT
parisc: select ARCH_MIGHT_HAVE_PC_PARPORT
mips: select ARCH_MIGHT_HAVE_PC_PARPORT
microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT
m68k: select ARCH_MIGHT_HAVE_PC_PARPORT
ia64: select ARCH_MIGHT_HAVE_PC_PARPORT
arm: select ARCH_MIGHT_HAVE_PC_PARPORT
alpha: select ARCH_MIGHT_HAVE_PC_PARPORT
c6x: remove unused parameter in Kconfig
|
|
into fixes
From Nicolas Ferre, fixes for early boot hangs on at91:
Fixes for RTT & RTC interrupts that can fire early during boot process
and kill the system.
* tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91:
ARM: at91: fix hanged boot due to early rtt-interrupt
ARM: at91: fix hanged boot due to early rtc-interrupt
|
|
Otherwise we can get errors like:
arch/arm/mach-omap2/prm44xx.c:274: error: redefinition of ‘omap44xx_prm_reconfigure_io_chain’
arch/arm/mach-omap2/built-in.o: In function `default_finish_suspend':
arch/arm/mach-omap2/omap-mpuss-lowpower.c:95: undefined reference to `omap_do_wfi'
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
OMAP device hooks around suspend|resume_noirq ensures that hwmod
devices are forced to idle using omap_device_idle/enable as part of
the last stage of suspend activity.
For a device such as i2c who uses autosuspend, it is possible to enter
the suspend path with dev->power.runtime_status = RPM_ACTIVE.
As part of the suspend flow, the generic runtime logic would increment
it's dev->power.disable_depth to 1. This should prevent further
pm_runtime_get_sync from succeeding once the runtime_status has been
set to RPM_SUSPENDED.
Now, as part of the suspend_noirq handler in omap_device, we force the
following: if the device status is !suspended, we force the device
to idle using omap_device_idle (clocks are cut etc..). This ensures
that from a hardware perspective, the device is "suspended". However,
runtime_status is left to be active.
*if* an operation is attempted after this point to
pm_runtime_get_sync, runtime framework depends on runtime_status to
indicate accurately the device status, and since it sees it to be
ACTIVE, it assumes the module is functional and returns a non-error
value. As a result the user will see pm_runtime_get succeed, however a
register access will crash due to the lack of clocks.
To prevent this from happening, we should ensure that runtime_status
exactly indicates the device status. As a result of this change
any further calls to pm_runtime_get* would return -EACCES (since
disable_depth is 1). On resume, we restore the clocks and runtime
status exactly as we suspended with. These operations are not expected
to fail as we update the states after the core runtime framework has
suspended itself and restore before the core runtime framework has
resumed.
Cc: stable@vger.kernel.org # v3.4+
Reported-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In case of error, the function get_cpu_device() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When the availability of a pci function has changed by means
outside of our control we receive an availability event.
Implement/improve the handling of these notifications.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Stop hiding scm_block's dependency to the eadm subchannel driver
(by using functions provided by the eadm subchannel instead of
wrappers provided by the scm bus).
This will help userspace recognizing module dependencies (e.g. for
building a ramdisk). As a side effect we can get rid of some code
reimplementing refcounting between those modules.
Reported-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The new function calls the old ones. The sclp_event_mask_early() is removed
and replaced by one invocation of sclp_set_event_mask(0, 0).
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The early SCLP driver code in sclp_cmd.c belongs to sclp_early.c
because it is independent from the 'normal' SCLP driver. So move
it to sclp_early.c
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Currently we have hardcoded the HSA size to 32 MiB. With this patch the
HSA size is determined dynamically via SCLP in early.c.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Implement pcibios_remove_bus to free arch specific data when a pci
bus is deregistered. While at it remove a useless kzalloc/kfree
wrapper.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Cleanup the functions for allocation and setup of bus resources. Do
not allocate the same name for each resource but use a per-bus name.
Also provide means to cleanup all resources allocated by a bus.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The compressed kernel image is built since commit "[S390] add support for
compressed kernels" (1844c9bc0b2fed3023551c1affe033ab38e90b9a).
Now install the compressed kernel image (bzImage) as default.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Make sure the RTT-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTT, for example, if an
RTT-alarm goes off after a non-clean shutdown (e.g. when using RTC
wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
|
|
Make sure the RTC-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for
example, after a reset during an RTC-update or if an RTC-alarm goes off
after shutdown (e.g. when using RTC wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
|
|
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
add smb_wmb()/smp_rmb() to keep cache coherent
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
We shouldn't sleep in atomic sections.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
|
|
The serial driver sets up port function manually in early platform probe stage
if the ADI GPIO2 driver is used. Remove the bfin_sport_uart early platform
devices.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
|
|
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
- Change fdt pointer (passed from head.S) from unsigned int to void *,
which allows to kill a cast, and makes it compatible with __dtb_start.
- Use pr_info(),
- Extract common part.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux@lists.openrisc.net
Signed-off-by: Jonas Bonn <jonas@southpole.se>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
|
|
Openrisc's private vmlinux.h duplicates a few definitions that are already
provided by asm-generic/sections.h. The former is used by setup.c only,
while the latter is already used everywhere else.
Convert setup.c to use the generic version:
- Include <asm/sections.h>,
- Remove the (slightly different) extern declarations,
- Remove the no longer needed address-of ('&') operators.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
|
|
Remove gpio driver for new gpio controller on BF54x and BF60x.
Build the bfin_gpio driver only when other BF5xx processors are selected.
Replace the prefix of some gpio and peripheral functions with adi.
add portmux platform data in machine portmux.h
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
