summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-03-04Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton akpm@linux-foundation.org>: mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS MAINTAINERS: add and correct types of some "T:" entries MAINTAINERS: use tab for separator rapidio/tsi721: fix tasklet termination in dma channel release hfsplus: fix remount issue zram: avoid null access when fail to alloc meta sh: prefix sh-specific "CCR" and "CCR2" by "SH_" ocfs2: fix quota file corruption drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX kallsyms: fix absolute addresses for kASLR scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking memcg: reparent charges of children before processing parent memcg: fix endless loop in __mem_cgroup_iter_next() lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock dma debug: account for cachelines and read-only mappings in overlap tracking mm: close PageTail race MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
2014-03-04sh: prefix sh-specific "CCR" and "CCR2" by "SH_"Geert Uytterhoeven
Commit bcf24e1daa94 ("mmc: omap_hsmmc: use the generic config for omap2plus devices"), enabled the build for other platforms for compile testing. sh-allmodconfig now fails with: include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1 This happens because SuperH #defines "CCR", which is one of the enum values in include/linux/omap-dma.h. There's a similar issue with "CCR2" on sh2a. As "CCR" and "CCR2" are too generic names for global #defines, prefix them with "SH_" to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clk framework fixes from Mike Turquette: "Clock framework and driver fixes, all of which fix user-visible regressions. There is a single framework fix that prevents dereferencing a NULL pointer when calling clk_get. The range of fixes for clock driver regressions spans memory leak fixes, touching the wrong registers that cause things to explode, misconfigured clock rates that result in non-responsive devices and even some boot failures. The most benign fix is DT binding doc typo. It is a stable ABI exposed from the kernel that was introduced in -rc1, so best to fix it now" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk:at91: Fix memory leak in of_at91_clk_master_setup() clk: nomadik: fix multiplatform problem clk: Correct handling of NULL clk in __clk_{get, put} clk: shmobile: Fix typo in MSTP clock DT bindings clk: shmobile: rcar-gen2: Fix qspi divisor clk: shmobile: rcar-gen2: Fix clock parent for all non-PLL clocks clk: tegra124: remove gr2d and gr3d clocks clk: tegra: Fix vic03 mux index clk: shmobile: rcar-gen2: Fix qspi divisor clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks clk: tegra: use max divider if divider overflows clk: tegra: cclk_lp has a pllx/2 divider clk: tegra: fix sdmmc clks on Tegra1x4 clk: tegra: fix host1x clock on Tegra124 clk: tegra: PLLD2 fixes for hdmi clk: tegra: Fix PLLD mnp table clk: tegra: Fix PLLP rate table clk: tegra: Correct clock number for UARTE clk: tegra: Add missing Tegra20 fuse clks ARM: keystone: dts: fix clkvcp3 control register address ...
2014-03-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes, most of them on the tooling side" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix strict alias issue for find_first_bit perf tools: fix BFD detection on opensuse perf: Fix hotplug splat perf/x86: Fix event scheduling perf symbols: Destroy unused symsrcs perf annotate: Check availability of annotate when processing samples
2014-03-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "The VMCOREINFO patch I'll pushing for this release to avoid having a release with kASLR and but without that information. I was hoping to include the FPU patches from Suresh, but ran into a problem (see other thread); will try to make them happen next week" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kaslr: add missed "static" declarations x86, kaslr: export offset in VMCOREINFO ELF notes
2014-02-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Three x86 fixes and one for ARM/ARM64. In particular, nested virtualization on Intel is broken in 3.13 and fixed by this pull request" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm, vmx: Really fix lazy FPU on nested guest kvm: x86: fix emulator buffer overflow (CVE-2014-0049) arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT KVM: MMU: drop read-only large sptes when creating lower level sptes
2014-02-28Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 fixes from Catalin Marinas: - !CONFIG_SMP build fix - pte bit testing macros conversion fix (int truncates top bits of long) - stack unwinding PC calculation fix * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix !CONFIG_SMP kernel build arm64: mm: Add double logical invert to pte accessors ARM64: unwind: Fix PC calculation
2014-02-28Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are a few more powerpc fixes for 3.14. Most of these are also CC'ed to stable and fix bugs in new functionality introduced in the last 2 or 3 versions" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powernv: Fix indirect XSCOM unmangling powerpc/powernv: Fix opal_xscom_{read,write} prototype powerpc/powernv: Refactor PHB diag-data dump powerpc/powernv: Dump PHB diag-data immediately powerpc: Increase stack redzone for 64-bit userspace to 512 bytes powerpc/ftrace: bugfix for test_24bit_addr powerpc/crashdump : Fix page frame number check in copy_oldmem_page powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
2014-02-28arm64: Fix !CONFIG_SMP kernel buildCatalin Marinas
Commit fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on resume) uses per_cpu_offset() unconditionally during CPU wakeup, however, this is only defined for the SMP case. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Dave P Martin <Dave.Martin@arm.com>
2014-02-28arm64: mm: Add double logical invert to pte accessorsSteve Capper
Page table entries on ARM64 are 64 bits, and some pte functions such as pte_dirty return a bitwise-and of a flag with the pte value. If the flag to be tested resides in the upper 32 bits of the pte, then we run into the danger of the result being dropped if downcast. For example: gather_stats(page, md, pte_dirty(*pte), 1); where pte_dirty(*pte) is downcast to an int. This patch adds a double logical invert to all the pte_ accessors to ensure predictable downcasting. Signed-off-by: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-28powerpc/powernv: Fix indirect XSCOM unmanglingBenjamin Herrenschmidt
We need to unmangle the full address, not just the register number, and we also need to support the real indirect bit being set for in-kernel uses. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13]
2014-02-28powerpc/powernv: Fix opal_xscom_{read,write} prototypeBenjamin Herrenschmidt
The OPAL firmware functions opal_xscom_read and opal_xscom_write take a 64-bit argument for the XSCOM (PCB) address in order to support the indirect mode on P8. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13]
2014-02-28powerpc/powernv: Refactor PHB diag-data dumpGavin Shan
As Ben suggested, the patch prints PHB diag-data with multiple fields in one line and omits the line if the fields of that line are all zero. With the patch applied, the PHB3 diag-data dump looks like: PHB3 PHB#3 Diag-data (Version: 1) brdgCtl: 00000002 RootSts: 0000000f 00400000 b0830008 00100147 00002000 nFir: 0000000000000000 0030006e00000000 0000000000000000 PhbSts: 0000001c00000000 0000000000000000 Lem: 0000000000100000 42498e327f502eae 0000000000000000 InAErr: 8000000000000000 8000000000000000 0402030000000000 0000000000000000 PE[ 8] A/B: 8480002b00000000 8000000000000000 [ The current diag data is so big that it overflows the printk buffer pretty quickly in cases when we get a handful of errors at once which can happen. --BenH ] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28powerpc/powernv: Dump PHB diag-data immediatelyGavin Shan
The PHB diag-data is important to help locating the root cause for EEH errors such as frozen PE or fenced PHB. However, the EEH core enables IO path by clearing part of HW registers before collecting this data causing it to be corrupted. This patch fixes this by dumping the PHB diag-data immediately when frozen/fenced state on PE or PHB is detected for the first time in eeh_ops::get_state() or next_error() backend. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28powerpc: Increase stack redzone for 64-bit userspace to 512 bytesPaul Mackerras
The new ELFv2 little-endian ABI increases the stack redzone -- the area below the stack pointer that can be used for storing data -- from 288 bytes to 512 bytes. This means that we need to allow more space on the user stack when delivering a signal to a 64-bit process. To make the code a bit clearer, we define new USER_REDZONE_SIZE and KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the kernel redzone size at 288 bytes, since increasing it to 512 bytes would increase the size of interrupt stack frames correspondingly. Gcc currently only makes use of 288 bytes of redzone even when compiling for the new little-endian ABI, and the kernel cannot currently be compiled with the new ABI anyway. In the future, hopefully gcc will provide an option to control the amount of redzone used, and then we could reduce it even more. This also changes the code in arch_compat_alloc_user_space() to preserve the expanded redzone. It is not clear why this function would ever be used on a 64-bit process, though. Signed-off-by: Paul Mackerras <paulus@samba.org> CC: <stable@vger.kernel.org> [v3.13] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28powerpc/ftrace: bugfix for test_24bit_addrLiu Ping Fan
The branch target should be the func addr, not the addr of func_descr_t. So using ppc_function_entry() to generate the right target addr. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28powerpc/crashdump : Fix page frame number check in copy_oldmem_pageLaurent Dufour
In copy_oldmem_page, the current check using max_pfn and min_low_pfn to decide if the page is backed or not, is not valid when the memory layout is not continuous. This happens when running as a QEMU/KVM guest, where RTAS is mapped higher in the memory. In that case max_pfn points to the end of RTAS, and a hole between the end of the kdump kernel and RTAS is not backed by PTEs. As a consequence, the kdump kernel is crashing in copy_oldmem_page when accessing in a direct way the pages in that hole. This fix relies on the memblock's service memblock_is_region_memory to check if the read page is part or not of the directly accessible memory. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctlyTony Breeds
Currently we're storing a host endian RTAS token in rtas_stop_self_args.token. We then pass that directly to rtas. This is fine on big endian however on little endian the token is not what we expect. This will typically result in hitting: panic("Alas, I survived.\n"); To fix this we always use the stop-self token in host order and always convert it to be32 before passing this to rtas. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-27kvm, vmx: Really fix lazy FPU on nested guestPaolo Bonzini
Commit e504c9098ed6 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13) highlighted a real problem, but the fix was subtly wrong. nested_read_cr0 is the CR0 as read by L2, but here we want to look at the CR0 value reflecting L1's setup. In other words, L2 might think that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually running it with TS=1, we should inject the fault into L1. The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use it. Fixes: e504c9098ed6acd9e1079c5e10e4910724ad429f Reported-by: Kashyap Chamarty <kchamart@redhat.com> Reported-by: Stefan Bader <stefan.bader@canonical.com> Tested-by: Kashyap Chamarty <kchamart@redhat.com> Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-27kvm: x86: fix emulator buffer overflow (CVE-2014-0049)Andrew Honig
The problem occurs when the guest performs a pusha with the stack address pointing to an mmio address (or an invalid guest physical address) to start with, but then extending into an ordinary guest physical address. When doing repeated emulated pushes emulator_read_write sets mmio_needed to 1 on the first one. On a later push when the stack points to regular memory, mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0. As a result, KVM exits to userspace, and then returns to complete_emulated_mmio. In complete_emulated_mmio vcpu->mmio_cur_fragment is incremented. The termination condition of vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved. The code bounces back and fourth to userspace incrementing mmio_cur_fragment past it's buffer. If the guest does nothing else it eventually leads to a a crash on a memcpy from invalid memory address. However if a guest code can cause the vm to be destroyed in another vcpu with excellent timing, then kvm_clear_async_pf_completion_queue can be used by the guest to control the data that's pointed to by the call to cancel_work_item, which can be used to gain execution. Fixes: f78146b0f9230765c6315b2e14f56112513389ad Signed-off-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org (3.5+) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-27arm/arm64: KVM: detect CPU reset on CPU_PM_EXITMarc Zyngier
Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by: Andre Przywara <osp@andrep.de> Tested-by: Andre Przywara <osp@andrep.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <rob.herring@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-27perf/x86: Fix event schedulingPeter Zijlstra
Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures, with perf WARN_ON()s triggering. He also provided traces of the failures. This is I think the relevant bit: > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1 > pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800) So we add the insn:p event (fd[23]). At this point we should have: n_events = 2, n_added = 1, n_txn = 1 > pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800) > pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00) We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]). These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so that's not visible. group_sched_in() pmu->start_txn() /* nop - BP pmu */ event_sched_in() event->pmu->add() So here we should end up with: 0: n_events = 3, n_added = 2, n_txn = 2 4: n_events = 4, n_added = 3, n_txn = 3 But seeing the below state on x86_pmu_enable(), the must have failed, because the 0 and 4 events aren't there anymore. Looking at group_sched_in(), since the BP is the leader, its event_sched_in() must have succeeded, for otherwise we would not have seen the sibling adds. But since neither 0 or 4 are in the below state; their event_sched_in() must have failed; but I don't see why, the complete state: 0,0,1:p,4 fits perfectly fine on a core2. However, since we try and schedule 4 it means the 0 event must have succeeded! Therefore the 4 event must have failed, its failure will have put group_sched_in() into the fail path, which will call: event_sched_out() event->pmu->del() on 0 and the BP event. Now x86_pmu_del() will reduce n_events; but it will not reduce n_added; giving what we see below: n_event = 2, n_added = 2, n_txn = 2 > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2 > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0 So the problem is that x86_pmu_del(), when called from a group_sched_in() that fails (for whatever reason), and without x86_pmu TXN support (because the leader is !x86_pmu), will corrupt the n_added state. Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-26KVM: MMU: drop read-only large sptes when creating lower level sptesMarcelo Tosatti
Read-only large sptes can be created due to read-only faults as follows: - QEMU pagetable entry that maps guest memory is read-only due to COW. - Guest read faults such memory, COW is not broken, because it is a read-only fault. - Enable dirty logging, large spte not nuked because it is read-only. - Write-fault on such memory causes guest to loop endlessly (which must go down to level 1 because dirty logging is enabled). Fix by dropping large spte when necessary. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-25x86, kaslr: add missed "static" declarationsKees Cook
This silences build warnings about unexported variables and functions. Signed-off-by: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20140209215644.GA30339@www.outflux.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-25x86, kaslr: export offset in VMCOREINFO ELF notesEugene Surovegin
Include kASLR offset in VMCOREINFO ELF notes to assist in debugging. [ hpa: pushing this for v3.14 to avoid having a kernel version with kASLR where we can't debug output. ] Signed-off-by: Eugene Surovegin <surovegin@google.com> Link: http://lkml.kernel.org/r/20140123173120.GA25474@www.outflux.net Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven: - More barrier.h consolidation - Sched_[gs]etattr() syscalls * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up sched_setattr and sched_getattr m68k: Switch to asm-generic/barrier.h m68k: Sort arch/m68k/include/asm/Kbuild
2014-02-25Merge tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull tensa fixes from Chris Zankel: "This series includes fixes for potentially serious bugs in the routines spilling processor registers to stack, as well as other issues and compiler errors and warnings. - allow booting xtfpga on boards with new uBoot and >128MBytes memory - drop nonexistent GPIO32 support from fsf variant - don't select USE_GENERIC_SMP_HELPERS - enable common clock framework support, set up ethoc clock on xtfpga - wire up sched_setattr and sched_getattr syscalls. - fix system call to spill the processor registers to stack. - improve kernel macro to spill the processor registers - export ccount_freq symbol - fix undefined symbol warning" * tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux: xtensa: wire up sched_setattr and sched_getattr syscalls xtensa: xtfpga: set ethoc clock frequency xtensa: xtfpga: use common clock framework xtensa: support common clock framework xtensa: no need to select USE_GENERIC_SMP_HELPERS xtensa: fsf: drop nonexistent GPIO32 support xtensa: don't pass high memory to bootmem allocator xtensa: fix fast_syscall_spill_registers xtensa: fix fast_syscall_spill_registers xtensa: save current register frame in fast_syscall_spill_registers_fixup xtensa: introduce spill_registers_kernel macro xtensa: export ccount_freq xtensa: fix warning '"CONFIG_OF" is not defined'
2014-02-24Merge branch 'clocks/fixes/drivers' of git://linuxtv.org/pinchartl/fbdev ↵Mike Turquette
into clk-fixes
2014-02-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 bug fixes from Martin Schwidefsky: "A couple of s390 bug fixes. The PCI segment boundary issue is a nasty one as it can lead to data corruption" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: Fix missing subchannels after CHPID configure on s390/pci/dma: use correct segment boundary size s390/compat: fix sys_sched_getattr compat wrapper s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
2014-02-24Merge tag 'xtensa-for-next-20140221-1' into for_nextChris Zankel
Xtensa fixes for 3.14: - allow booting xtfpga on boards with new uBoot and >128MBytes memory; - drop nonexistent GPIO32 support from fsf variant; - don't select USE_GENERIC_SMP_HELPERS; - enable common clock framework support, set up ethoc clock on xtfpga; - wire up sched_setattr and sched_getattr syscalls. Signed-off-by: Chris Zankel <chris@zankel.net>
2014-02-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes for ARM platforms. Most are fixes for DTS files, mostly from DT conversion on OMAP which is still finding a few issues here and there. There's a couple of small stale code removal patches that we usually queue for the next release instead, but they seemed harmless enough to bring in now. Also, a fix for backlight on some PXA platforms, and a cache configuration fix for Tegra, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer ARM: tegra: only run PL310 init on systems with one ARM: tegra: Add head numbers to display controllers ARM: imx6: build pm-imx6q.c independently of CONFIG_PM ARM: tegra: fix RTC0 alias for Cardhu ARM: dove: dt: revert PMU interrupt controller node Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ...
2014-02-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - a bugfix which prevents a divide by 0 panic when the newly introduced try_msr_calibrate_tsc() fails - enablement of the Baytrail platform to utilize the newfangled msr based calibration * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: tsc: Add missing Baytrail frequency to the table x86, tsc: Fallback to normal calibration if fast MSR calibration fails
2014-02-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixlets from all around the place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table perf/x86: Correctly use FEATURE_PDCM perf, nmi: Fix unknown NMI warning perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches perf trace: Add fallback definition of EFD_SEMAPHORE perf list: Fix checking for supported events on older kernels perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly perf probe: Do not add offset twice to uprobe address perf/x86: Fix Userspace RDPMC switch perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
2014-02-21Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree fixes from Grant Likely: "Device tree compatible match order bug fix This branch contains a bug fix for the way devicetree code identifies the type of device. Device drivers can contain a list of of_device_ids, but it more than one entry will match, then the device driver may choose the wrong one. Commit 105353145e, "match each node compatible against all given matches first", was queued for v3.14 but ended up causing other bugs. Commit 06b29e76a7 attempted to fix it but it had other bugs. Merely reverting the fix and waiting until v3.15 isn't a good option because there is code in v3.14 that depends on the revised behaviour to boot. This branch should finally fixes the problem correctly. This time instead of just hoping that the patch is correct, this branch also adds new testcases that validate the behaviour. The changes in this branch are larger than I would like for a -rc pull, but moving the test case data out of out of arch/arm so that it could be validated on other architectures was important" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Add self test for of_match_node() of: Move testcase FDT data into drivers/of of: reimplement the matching method for __of_match_node() Revert "of: search the best compatible match first in __of_match_node()"
2014-02-21perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter tableStephane Eranian
This patch updates the CBOX PMU filters mapping tables for SNB-EP and IVT (model 45 and 62 respectively). The NID umask always comes in addition to another umask. When set, the NID filter is applied. The current mapping tables were missing some code/umask combinations to account for the NID umask. This patch fixes that. Cc: mingo@elte.hu Cc: ak@linux.intel.com Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-21perf/x86: Correctly use FEATURE_PDCMPeter Zijlstra
The current code simply assumes Intel Arch PerfMon v2+ to have the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead. This was found by KVM which implements v2+ but didn't provide the capabilities MSR. Change the code to DTRT; KVM will also implement the MSR and return 0. Cc: pbonzini@redhat.com Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-21perf, nmi: Fix unknown NMI warningMarkus Metzger
When using BTS on Core i7-4*, I get the below kernel warning. $ perf record -c 1 -e branches:u ls Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2. Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317920] Do you have a strange power saving mode enabled? Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317945] Dazed and confused, but trying to continue Make intel_pmu_handle_irq() take the full exit path when returning early. Cc: eranian@google.com Cc: peterz@infradead.org Cc: mingo@kernel.org Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-21xtensa: wire up sched_setattr and sched_getattr syscallsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Three minor fixes from David Howells and Paul Gortmaker" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2] sparc32: make copy_to/from_user_page() usable from modular code sparc32: fix build failure for arch_jump_label_transform
2014-02-21xtensa: xtfpga: set ethoc clock frequencyMax Filippov
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC base frequency in the platform data in case of build w/o CONFIG_OF. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: xtfpga: use common clock frameworkMax Filippov
With this change the board needs to set up single clock object, users of this clock will get correct frequency automatically. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: support common clock frameworkMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: no need to select USE_GENERIC_SMP_HELPERSPaul Bolle
Commit f615136c06a7 ("xtensa: add SMP support") added "select USE_GENERIC_SMP_HELPERS". But the Kconfig symbol USE_GENERIC_SMP_HELPERS was already removed in v3.13, so that select is a nop. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: fsf: drop nonexistent GPIO32 supportMax Filippov
The toolchain for xtensa FSF core never supported GPIO32, drop it on the linux side too. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Baruch Siach <baruch@tkos.co.il>
2014-02-21xtensa: don't pass high memory to bootmem allocatorMax Filippov
This fixes panic when booting on machine with more than 128M memory passed from the bootloader. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21s390/pci/dma: use correct segment boundary sizeGerald Schaefer
The boundary size for iommu_area_alloc() is currently set to a constant value. This is wrong, we shouldn't use a constant value but rather the return value of dma_get_seg_boundary(), since a device driver can override the default. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/compat: fix sys_sched_getattr compat wrapperHeiko Carstens
Fix stupid typo. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-20Merge branch 'for-3.14-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Quite a few fixes this time. Three locking fixes, all marked for -stable. A couple error path fixes and some misc fixes. Hugh found a bug in memcg offlining sequence and we thought we could fix that from cgroup core side but that turned out to be insufficient and got reverted. A different fix has been applied to -mm" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: update cgroup_enable_task_cg_lists() to grab siglock Revert "cgroup: use an ordered workqueue for cgroup destruction" cgroup: protect modifications to cgroup_idr with cgroup_mutex cgroup: fix locking in cgroup_cfts_commit() cgroup: fix error return from cgroup_create() cgroup: fix error return value in cgroup_mount() cgroup: use an ordered workqueue for cgroup destruction nfs: include xattr.h from fs/nfs/nfs3proc.c cpuset: update MAINTAINERS entry arm, pm, vmpressure: add missing slab.h includes
2014-02-20Merge branch 'fixes-for-v3.14' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "This contains fixes for incorrect atomic test in dma-mapping subsystem for ARM and x86 architecture" * 'fixes-for-v3.14' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: x86: dma-mapping: fix GFP_ATOMIC macro usage ARM: dma-mapping: fix GFP_ATOMIC macro usage
2014-02-20of: Move testcase FDT data into drivers/ofGrant Likely
The testcase data is usable by any platform. This patch moves it into the drivers/of directory so it can be included by any architecture. Using the test cases requires manually adding #include <testcases.dtsi> to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not pretty though. A useful project would be to make the testcase code easier to execute. Signed-off-by: Grant Likely <grant.likely@linaro.org>