summaryrefslogtreecommitdiff
path: root/arch/xtensa/boot
AgeCommit message (Collapse)Author
2017-03-03Merge tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
2017-03-01xtensa: clean up bootable image build targetsMax Filippov
Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa supports three targets: 'Image' (ELF image with reset vector), 'zImage' (compressed redboot image) and 'uImage' (U-Boot image). Provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-12-15xtensa: configure shared DMA pool reservation in kc705 DTSMax Filippov
Add example 64MByte long reservation in the first 512MBytes of physical memory used as shared DMA pool. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20xtensa: rearrange CCOUNT calibrationMax Filippov
DT-enabled kernel should have a CPU node connected to a clock. This clock is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback when CPU node cannot be found or has no clock and in non-DT-enabled configurations. Drop no longer needed code that updates CPU clock-frequency property in the DT; drop DT-related code from the platform_calibrate_ccount too. Move of_clk_init to the top of time_init, so that clocks are initialized before CCOUNT calibration is attempted. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20xtensa: xtfpga: use clock provider, don't update DTMax Filippov
Instead of querying hardcoded FPGA frequency register and then updating clock-frequency property in specificly named DT nodes in machine setup code register a clock provider that returns fixed-rate clock, configured by register specified in DT. This way we have less magic/hardcoded names and use more existing common clock framework code. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net>
2016-09-19xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.Scott Telford
Add module parameter xilinx_uartps.rx_trigger_level=32 to command line options for CSP to set Rx watermark for xuartps driver lower than the default value, to avoid UART overruns at 115200 bps. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-09xtensa: Added Cadence CSP kernel configuration for XtensaScott Telford
Added defconfig, device tree and Xtensa variant header files for the Cadence Configurable System Platform "xt_lnx" processor configuration. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: cleanup MMU setup and kernel layout macrosMax Filippov
Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11xtensa: xtfpga: fix earlycon endiannessMax Filippov
Serial port is attached to XTFPGA boards as native endian device, now that earlycon parameter parser understands mmio32native put it into earlycon kernel parameter. This makes early console functional on both little- and big-endian CPUs with identical kernel command lines. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11xtensa: xtfpga: fix i2c controller register width and endiannessMax Filippov
I2C controller is attached to XTFPGA boards as native endian device, mark it as such in DTS. Set register width in DTS to 4, this way it works both for little- and big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11xtensa: xtfpga: fix ethernet controller endiannessMax Filippov
Ethernet controller is attached to XTFPGA boards as native endian device, mark it as such in DTS and pass correct endianness in platform data. This makes network functional on big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11xtensa: xtfpga: fix serial port register width and endiannessMax Filippov
Serial port is attached to XTFPGA boards as native endian device, mark it as such in DTS and pass correct endianness in platform data. Set register width in DTS to 4, this way it matches the platform data and works correctly on big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-09Merge tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull xtensa updates from Chris Zankel: - fix remaining issues with noMMU cores - fix build for cores w/o cache or zero overhead loop options - fix boot of secondary cores in SMP configuration - add support for DMA to high memory pages - add dma_to_phys and phys_to_dma functions. * tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux: xtensa: implement dma_to_phys and phys_to_dma xtensa: support DMA to high memory Revert "xtensa: cache inquiry and unaligned cache handling functions" xtensa: drop unused sections and remapped reset handlers xtensa: fix secondary core boot in SMP xtensa: add FORCE_MAX_ZONEORDER to Kconfig xtensa: nommu: provide defconfig for de212 on kc705 xtensa: nommu: xtfpga: add kc705 DTS xtensa: add de212 core variant xtensa: nommu: select HAVE_FUTEX_CMPXCHG xtensa: nommu: fix default memory start address xtensa: nommu: provide correct KIO addresses xtensa: nommu: fix USER_RING definition xtensa: xtfpga: fix integer overflow in TASK_SIZE xtensa: fix build for configs without cache options xtensa: fixes for configs without loop option
2015-11-03xtensa: drop unused sections and remapped reset handlersMax Filippov
There are no .bootstrap or .ResetVector.text sections linked to the vmlinux image, drop these sections from vmlinux.ld.S. Drop RESET_VECTOR_VADDR definition only used for .ResetVector.text. Drop remapped copies of primary and secondary reset vectors, as modern gdb don't have problems stepping through instructions at arbitrary locations. Drop corresponding sections from the corresponding linker scripts. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: xtfpga: add kc705 DTSMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-10-27xtensa: enable building of all dtbsRob Herring
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org
2015-02-07xtensa: xtfpga: add audio card to xtfpga DTSMax Filippov
This includes OpenCores I2C host controller, TI CDCE706 clock generator, xtfpga I2S master controller, xtfpga SPI master controller, TI TLV320AIC23 audio codec and a simple audio card. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: nommu: fix uImage load addressMax Filippov
Use the same offset from the default physical memory start address as in LOAD_MEMORY_ADDRESS definition. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: nommu: fix Image.elf reset code and ld scriptMax Filippov
Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try to link it when building noMMU configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21xtensa: xtfpga: add lx200 SMP DTS and defconfigMax Filippov
This config allows running SMP-enabled bitstream on LX200 board. NFS or FLASH rootfs, minimal debug, up to 4 cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: configure kc705 for highmemMax Filippov
Enable all memory available on KC705 (1G - 128M) by default. Update memory node in DTS and also limit usable memory in bootargs in case memmap is passed from the bootloader. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-06xtensa: add support for KC705Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-06xtensa: xtfpga: introduce SoC I/O busMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: xtfpga: set ethoc clock frequencyMax Filippov
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC base frequency in the platform data in case of build w/o CONFIG_OF. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21xtensa: xtfpga: use common clock frameworkMax Filippov
With this change the board needs to set up single clock object, users of this clock will get correct frequency automatically. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: standardize devicetree cpu compatible stringsBaruch Siach
The recommended compatible string format, according to the ePAPR v1.1 standard, is "manufacturer,model". Change the xtensa cpu compatible strings to "cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way. The pic compatible string will be dealt with in a separate patch. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14xtensa: move built-in PIC to drivers/irqchipMax Filippov
Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-09-06xtensa: don't use echo -e needlesslyMax Filippov
-e is not needed to output strings without escape sequences. This breaks big endian FSF build when the shell is dash, because its builtin echo doesn't understand '-e' switch and outputs it in the echoed string. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: add static function tracer supportMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: tell git to ignore generated .dtb filesBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08xtensa: tell git to ignore copied zlib source filesBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-06-05xtensa: tell git to ignore generated filesBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: fix redboot load addressChris Zankel
With the patch to support MMUv3, the base address for the loaded binary image has changed, and a fix was applied to the U-Boot image. This fixes the RedBoot image. Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: add MMU v3 supportMax Filippov
MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-02-23xtensa: use new common dtc ruleStephen Warren
The current rules have the .dtb files build in a different directory from the .dts files. This patch changes xtensa to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires moving parts of arch/xtensa/boot/Makefile into newly created arch/xtensa/boot/dts/Makefile, and updating arch/xtensa/Makefile to call the new Makefile. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: don't try to build DTB when OF is disabledMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add XTFPGA DTSMax Filippov
Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60 and for ML605. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add support for the XTFPGA boardsMax Filippov
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add device trees supportMax Filippov
Device trees allow specification of hardware topology and device parameters at runtime instead of hard-coding them in platform setup code. This allows running single binary kernel on a range of compatible boards. New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat device tree is passed in it. Note that current interrupt mapping scheme uses single cell for interrupt identification. That means that IRQ numbers used in DTS must be CPU internal IRQ numbers, not external. It is possible to extend interrupt identification to two cells, and use second cell to tell external IRQ numbers form internal. That would allow to use single DTS on multiple boards with different mapping of external IRQ numbers. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add U-Boot image support (uImage).Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: clean up boot make rulesMax Filippov
- remove duplicate rules for binary and packed image - use predefined macros for ld/objcopy/gzip - remove build-id section from bootable elf image Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15xtensa: reorganize SR referencingMax Filippov
- reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-03xtensa: drop CONFIG_EMBEDDED_RAMDISKMax Filippov
Remove Kconfig entries, boot subdirectory, dependencies from other boot-* Makefiles, and sections from ld scripts. Remove stale redboot code that used to pass initrd addresses in a3 and a4 to _start. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-03xtensa: fix parallel makeMax Filippov
Make vmlinux.tmp and vmlinux.tmp.gz separate build targets, avoid removing vmlinux.tmp during vmlinux.tmp.gz build. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2011-03-17xtensa: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2008-11-06xtensa: move headers files to arch/xtensa/includeChris Zankel
Move all header files for xtensa to arch/xtensa/include and platform and variant header files to the appropriate arch/xtensa/platforms/ and arch/xtensa/variants/ directories. Moving the files gets also rid of all uses of symlinks in the Makefile. This has been completed already for the majority of the architectures and xtensa is one out of six missing. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2008-02-13[XTENSA] Fix makefile to work with binutils-2.18.Bob Wilson
When building with binutils-2.18, vmlinux includes .note.gnu.build-id sections that need to be stripped out when building the binary image. The old .xt.insn sections haven't been used for a long time, so don't bother stripping them. Signed-off-by: Bob Wilson <bob.wilson@acm.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2008-02-13[XTENSA] Use preprocessor to generate the linker script for the ELF boot imageChris Zankel
Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2008-02-13[XTENSA] adjust boot linker script start addressesMarc Gauthier
Move boot-redboot load address from 0xD0200000 to 0xD1000000 to make space for larger kernel images, in particular those with an embedded initramfs filesystem. Also properly set the ELF start address in boot-elf images so that PC need not be set manually when loading them using GDB. Signed-off-by: Marc Gauthier <marc@tensilica.com>
2007-10-20kbuild: restore arch/{ppc/xtensa}/boot cflagsMilton Miller
Commit 9a39e273d4df0560c724c5fe71f6314a0583ca2b removed the boot directory addition to CFLAGS that was being used by the subdirectory builds. For the other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly sets that to empty as it is explicitly for a single directory only. Append to KBUILD_CFLAGS instead. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 20:05:25 +0000