summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2016-08-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single bugfix to prevent irq remapping when the ioapic is disabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Do not init irq remapping if ioapic is disabled
2016-08-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM: - fixes for ITS init issues, error handling, IRQ leakage, race conditions - an erratum workaround for timers - some removal of misleading use of errors and comments - a fix for GICv3 on 32-bit guests MIPS: - fix for where the guest could wrongly map the first page of physical memory x86: - nested virtualization fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MIPS: KVM: Check for pfn noslot case kvm: nVMX: fix nested tsc scaling KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC arm64: KVM: report configured SRE value to 32-bit world arm64: KVM: remove misleading comment on pmu status KVM: arm/arm64: timer: Workaround misconfigured timer interrupt arm64: Document workaround for Cortex-A72 erratum #853709 KVM: arm/arm64: Change misleading use of is_error_pfn KVM: arm64: ITS: avoid re-mapping LPIs KVM: arm64: check for ITS device on MSI injection KVM: arm64: ITS: move ITS registration into first VCPU run KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic KVM: arm64: vgic-its: Plug race in vgic_put_irq KVM: arm64: vgic-its: Handle errors from vgic_add_lpi KVM: arm64: ITS: return 1 on successful MSI injection
2016-08-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: silently skip readahead for DAX inodes dax: fix device-dax region base fs/seq_file: fix out-of-bounds read mm: memcontrol: avoid unused function warning mm: clarify COMPACTION Kconfig text treewide: replace config_enabled() with IS_ENABLED() (2nd round) printk: fix parsing of "brl=" option soft_dirty: fix soft_dirty during THP split sysctl: handle error writing UINT_MAX to u32 fields get_maintainer: quiet noisy implicit -f vcs_file_exists checking byteswap: don't use __builtin_bswap*() with sparse
2016-08-26Merge tag 'pci-v4.8-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Resource management: - Update "pci=resource_alignment" documentation (Mathias Koehrer) MSI: - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig) - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig) Intel VMD host bridge driver: - Fix infinite loop executing irq's (Keith Busch)" * tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: VMD: Fix infinite loop executing irq's PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation
2016-08-26treewide: replace config_enabled() with IS_ENABLED() (2nd round)Masahiro Yamada
Commit 97f2645f358b ("tree-wide: replace config_enabled() with IS_ENABLED()") mostly killed config_enabled(), but some new users have appeared for v4.8-rc1. They are all used for a boolean option, so can be replaced with IS_ENABLED() safely. Link: http://lkml.kernel.org/r/1471970749-24867-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-24Merge tag 'for-linus-4.8b-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen regression fix from David Vrabel: "Fix a regression in the xenbus device preventing userspace tools from working" * tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: change the type of xen_vcpu_id to uint32_t xenbus: don't look up transaction IDs for ordinary writes
2016-08-24xen: change the type of xen_vcpu_id to uint32_tVitaly Kuznetsov
We pass xen_vcpu_id mapping information to hypercalls which require uint32_t type so it would be cleaner to have it as uint32_t. The initializer to -1 can be dropped as we always do the mapping before using it and we never check the 'not set' value anyway. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-24x86/apic: Do not init irq remapping if ioapic is disabledWanpeng Li
native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-23x86/PCI: VMD: Fix infinite loop executing irq'sKeith Busch
We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a number of memory corruption bugs in the newly added sha256-mb/sha256-mb code" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512-mb - fix ctx pointer crypto: sha256-mb - fix ctx pointer and digest copy
2016-08-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "An initrd microcode loading fix, and an SMP bootup topology setup fix to resolve crashes on SGI/UV systems if the BIOS is configured in a certain way" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix __max_logical_packages value setup x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
2016-08-18kvm: nVMX: fix nested tsc scalingPeter Feiner
When the host supported TSC scaling, L2 would use a TSC multiplier of 0, which causes a VM entry failure. Now L2's TSC uses the same multiplier as L1. Signed-off-by: Peter Feiner <pfeiner@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-18KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE writeRadim Krčmář
If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the write with vmcs02 as the current VMCS. This will incorrectly apply modifications intended for vmcs01 to vmcs02 and L2 can use it to gain access to L0's x2APIC registers by disabling virtualized x2APIC while using msr bitmap that assumes enabled. Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the current VMCS. An alternative solution would temporarily make vmcs01 the current VMCS, but it requires more care. Fixes: 8d14695f9542 ("x86, apicv: add virtual x2apic support") Reported-by: Jim Mattson <jmattson@google.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-18KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APICRadim Krčmář
msr bitmap can be used to avoid a VM exit (interception) on guest MSR accesses. In some configurations of VMX controls, the guest can even directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED APIC ACCESSES. L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI. To do so, L1 would first trick KVM to disable all possible interceptions by enabling APICv features and then would turn those features off; nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would not intercept previously enabled MSRs even though they were not safe with the new configuration. Correctly re-enabling interceptions is not enough as a second bug would still allow L1+L2 to access host's MSRs: msr bitmap was shared for all VMCSs, so L1 could trigger a race to get the desired combination of msr bitmap and VMX controls. This fix allocates a msr bitmap for every L1 VCPU, allows only safe x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would have to intercept everything anyway. Fixes: 3af18d9c5fe9 ("KVM: nVMX: Prepare for using hardware MSR bitmap") Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Wincy Van <fanwenyi0529@gmail.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-18x86/smp: Fix __max_logical_packages value setupJiri Olsa
Frank reported kernel panic when he disabled several cores in BIOS via following option: Core Disable Bitmap(Hex) [0] with number 0xFFE, which leaves 16 CPUs in system (out of 48). The kernel panic below goes along with following messages: smpboot: Max logical packages: 2^M smpboot: APIC(0) Converting physical 0 to logical package 0^M smpboot: APIC(20) Converting physical 1 to logical package 1^M smpboot: APIC(40) Package 2 exceeds logical package map^M smpboot: CPU 8 APICId 40 disabled^M smpboot: APIC(60) Package 3 exceeds logical package map^M smpboot: CPU 12 APICId 60 disabled^M ... general protection fault: 0000 [#1] SMP^M Modules linked in:^M CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M ... [<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M [<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M [<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M [<ffffffff81002190>] do_one_initcall+0x50/0x190^M [<ffffffff810ab193>] ? parse_args+0x293/0x480^M [<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M [<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M [<ffffffff816dc19e>] kernel_init+0xe/0x110^M [<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M [<ffffffff816dc190>] ? rest_init+0x80/0x80^M The reason for the panic is wrong value of __max_logical_packages, which lets logical_package_map uninitialized and the uncore code relying on this map being properly initialized (maybe we should add some safety checks there as well). The __max_logical_packages is computed as: DIV_ROUND_UP(total_cpus, ncpus); - ncpus being number of cores With above BIOS setup we get total_cpus == 16 which set __max_logical_packages to 2 (ncpus is 12). Once topology_update_package_map processes CPU with logical pkg over 2 we display above messages and fail to initialize the physical_to_logical_pkg map, which makes the uncore code crash. The fix is to remove logical_package_map bitmap completely and keep and update the logical_packages number instead. After we enumerate all the present CPUs, we check if the enumerated logical packages count is within its computed maximum from BIOS data. If it's not the case, we set this maximum to the new enumerated value and freeze any new addition of logical packages. The freeze is because lot of init code like uncore/rapl/cqm depends on having maximum logical package value set to allocate their data, so we can't change it later on. Prarit Bhargava tested the patch and confirms that it solves the problem: From dmidecode: Core Count: 24 Core Enabled: 24 Thread Count: 48 Orig kernel boot log: [ 0.464981] smpboot: Max logical packages: 19 [ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3 1. nr_cpus=8, should stop enumerating in package 0: [ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.539596] smpboot: Max logical packages: 19 2. max_cpus=8, should still enumerate all packages: [ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.550524] smpboot: Max logical packages: 19 3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in package 2: [ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.539368] smpboot: Max logical packages: 19 4. maxcpus=49, should still enumerate all packages: [ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.549624] smpboot: Max logical packages: 19 5. kdump (nr_cpus=1) works as well. Reported-by: Frank Ramsay <framsay@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=yBorislav Petkov
Similar to: efaad554b4ff ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y") ... fix microcode loading from the initrd on AMD by adding the randomization offset to the microcode patch container within the initrd. Reported-and-tested-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation
2016-08-16crypto: sha512-mb - fix ctx pointerXiaodong Liu
1. fix ctx pointer Use req_ctx which is the ctx for the next job that have been completed in the lanes instead of the first completed job rctx, whose completion could have been called and released. Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sha256-mb - fix ctx pointer and digest copyXiaodong Liu
1. fix ctx pointer Use req_ctx which is the ctx for the next job that have been completed in the lanes instead of the first completed job rctx, whose completion could have been called and released. 2. fix digest copy Use XMM register to copy another 16 bytes sha256 digest instead of a regular register. Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16x86/power/64: Use __pa() for physical address computationRafael J. Wysocki
The value of temp_level4_pgt is the physical address of the top-level page directory, so use __pa() to compute it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2016-08-12Merge tag 'pm-4.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Two hibernation fixes allowing it to work with the recently added randomization of the kernel identity mapping base on x86-64 and one cpufreq driver regression fix. Specifics: - Fix the x86 identity mapping creation helpers to avoid the assumption that the base address of the mapping will always be aligned at the PGD level, as it may be aligned at the PUD level if address space randomization is enabled (Rafael Wysocki). - Fix the hibernation core to avoid executing tracing functions before restoring the processor state completely during resume (Thomas Garnier). - Fix a recently introduced regression in the powernv cpufreq driver that causes it to crash due to an out-of-bounds array access (Akshay Adiga)" * tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly cpufreq: powernv: Fix crash in gpstate_timer_handler()
2016-08-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This is bigger than usual - the reason is partly a pent-up stream of fixes after the merge window and partly accidental. The fixes are: - five patches to fix a boot failure on Andy Lutomirsky's laptop - four SGI UV platform fixes - KASAN fix - warning fix - documentation update - swap entry definition fix - pkeys fix - irq stats fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe() x86/efi: Allocate a trampoline if needed in efi_free_boot_services() x86/boot: Rework reserve_real_mode() to allow multiple tries x86/boot: Defer setup_real_mode() to early_initcall time x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly x86/boot: Run reserve_bios_regions() after we initialize the memory map x86/irq: Do not substract irq_tlb_count from irq_call_count x86/mm: Fix swap entry comment and macro x86/mm/kaslr: Fix -Wformat-security warning x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET x86/mm: Disable preemption during CR3 read+write x86/mm/KASLR: Increase BRK pages for KASLR memory randomization x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
2016-08-12Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Misc fixes: a /dev/rtc regression fix, two APIC timer period calibration fixes, an ARM clocksource driver fix and a NOHZ power use regression fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup x86/timers/apic: Inform TSC deadline clockevent device about recalibration x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error timers: Fix get_next_timer_interrupt() computation clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
2016-08-12Merge branches 'pm-sleep' and 'pm-cpufreq'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly * pm-cpufreq: cpufreq: powernv: Fix crash in gpstate_timer_handler()
2016-08-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a perf-cgroups fix and an AUX events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add enable_box for client MSR uncore perf/x86/intel/uncore: Fix uncore num_counters uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions perf/core: Set cgroup in CPU contexts for new cgroup events perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash perf probe ppc64le: Fix probe location when using DWARF perf probe: Add function to post process kernel trace events tools: Sync cpufeatures headers with the kernel toops: Sync tools/include/uapi/linux/bpf.h with the kernel tools: Sync cpufeatures.h and vmx.h with the kernel perf probe: Support signedness casting perf stat: Avoid skew when reading events perf probe: Fix module name matching perf probe: Adjust map->reloc offset when finding kernel symbol from map perf hists: Trim libtraceevent trace_seq buffers perf script: Add 'bpf-output' field to usage message
2016-08-12perf/x86/intel/uncore: Add enable_box for client MSR uncoreKan Liang
There are bug reports about miscounting uncore counters on some client machines like Sandybridge, Broadwell and Skylake. It is very likely to be observed on idle systems. This issue is caused by a hardware issue. PERF_GLOBAL_CTL could be cleared after Package C7, and nothing will be count. The related errata (HSD 158) could be found in: www.intel.com/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf This patch tries to work around this issue by re-enabling PERF_GLOBAL_CTL in ->enable_box(). The workaround does not cover all cases. It helps for new events after returning from C7. But it cannot prevent C7, it will still miscount if a counter is already active. There is no drawback in leaving it enabled, so it does not need disable_box() here. Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1470925874-59943-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-12perf/x86/intel/uncore: Fix uncore num_countersKan Liang
Some uncore boxes' num_counters value for Haswell server and Broadwell server are not correct (too large, off by one). This issue was found by comparing the code with the document. Although there is no bug report from users yet, accessing non-existent counters is dangerous and the behavior is undefined: it may cause miscounting or even crashes. This patch makes them consistent with the uncore document. Reported-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1470925820-59847-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-12uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructionsDenys Vlasenko
Since instruction decoder now supports EVEX-encoded instructions, two fixes are needed to correctly handle them in uprobes. Extended bits for MODRM.rm field need to be sanitized just like we do it for VEX3, to avoid encoding wrong register for register-relative access. EVEX has _two_ extended bits: b and x. Theoretically, EVEX.x should be ignored by the CPU (since GPRs go only up to 15, not 31), but let's be paranoid here: proper encoding for register-relative access should have EVEX.x = 1. Secondly, we should fetch vex.vvvv for EVEX too. This is now super easy because instruction decoder populates vex_prefix.bytes[2] for all flavors of (e)vex encodings, even for VEX2. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v4.1+ Fixes: 8a764a875fe3 ("x86/asm/decoder: Create artificial 3rd byte for 2-byte VEX") Link: http://lkml.kernel.org/r/20160811154521.20469-1-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()Sebastian Andrzej Siewior
I made a mistake while converting the driver to the hotplug state machine and as a result x2apic_cluster_probe() was accessing cpus_in_cluster before allocating it. This patch fixes it by setting the cpumask after the allocation the memory succeeded. While at it, I marked two functions static which are only used within this file. Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6b2c28471de5 ("x86/x2apic: Convert to CPU hotplug state machine") Link: http://lkml.kernel.org/r/1470924515-9444-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/platform/uv: Skip UV runtime services mapping in the ↵Alex Thorlton
efi_runtime_disabled case This problem has actually been in the UV code for a while, but we didn't catch it until recently, because we had been relying on EFI_OLD_MEMMAP to allow our systems to boot for a period of time. We noticed the issue when trying to kexec a recent community kernel, where we hit this NULL pointer dereference in efi_sync_low_kernel_mappings(): [ 0.337515] BUG: unable to handle kernel NULL pointer dereference at 0000000000000880 [ 0.346276] IP: [<ffffffff8105df8d>] efi_sync_low_kernel_mappings+0x5d/0x1b0 The problem doesn't show up with EFI_OLD_MEMMAP because we skip the chunk of setup_efi_state() that sets the efi_loader_signature for the kexec'd kernel. When the kexec'd kernel boots, it won't set EFI_BOOT in setup_arch, so we completely avoid the bug. We always kexec with noefi on the command line, so this shouldn't be an issue, but since we're not actually checking for efi_runtime_disabled in uv_bios_init(), we end up trying to do EFI runtime callbacks when we shouldn't be. This patch just adds a check for efi_runtime_disabled in uv_bios_init() so that we don't map in uv_systab when runtime_disabled == true. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: <stable@vger.kernel.org> # v4.7 Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Travis <travis@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1470912120-22831-2-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/efi: Allocate a trampoline if needed in efi_free_boot_services()Andy Lutomirski
On my Dell XPS 13 9350 with firmware 1.4.4 and SGX on, if I boot Fedora 24's grub2-efi off a hard disk, my first 1MB of RAM looks like: efi: mem00: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000000fff] (0MB) efi: mem01: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000027fff] (0MB) efi: mem02: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000028000-0x0000000000029fff] (0MB) efi: mem03: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002a000-0x000000000002bfff] (0MB) efi: mem04: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000000002c000-0x000000000002cfff] (0MB) efi: mem05: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002d000-0x000000000002dfff] (0MB) efi: mem06: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000000002e000-0x0000000000057fff] (0MB) efi: mem07: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000058fff] (0MB) efi: mem08: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009ffff] (0MB) My EBDA is at 0x2c000, which blocks off everything from 0x2c000 and up, and my trampoline is 0x6000 bytes (6 pages), so it doesn't fit in the loader data range at 0x28000. Without this patch, it panics due to a failure to allocate the trampoline. With this patch, it works: [ +0.001744] Base memory trampoline at [ffff880000001000] 1000 size 24576 Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/998c77b3bf709f3dfed85cb30701ed1a5d8a438b.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/boot: Rework reserve_real_mode() to allow multiple triesAndy Lutomirski
If reserve_real_mode() fails, panicing immediately means we're doomed. Make it safe to try more than once to allocate the trampoline: - Degrade a failure from panic() to pr_info(). (If we make it to setup_real_mode() without reserving the trampoline, we'll panic them.) - Factor out helpers so that platform code can supply a specific address to try. - Warn if reserve_real_mode() is called after we're done with the memblock allocator. If that were to happen, we would behave unpredictably. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/876e383038f3e9971aa72fd20a4f5da05f9d193d.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/boot: Defer setup_real_mode() to early_initcall timeAndy Lutomirski
There's no need to run setup_real_mode() as early as we run it. Defer it to the same early_initcall that sets up the page permissions for the real mode code. This should be a code size reduction. More importantly, it give us a longer window in which we can allocate the real mode trampoline. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/fd62f0da4f79357695e9bf3e365623736b05f119.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directlyAndy Lutomirski
The initialization process for trampoline_cr4_features and mmu_cr4_features was confusing. The intent is for mmu_cr4_features and *trampoline_cr4_features to stay in sync, but trampoline_cr4_features is NULL until setup_real_mode() runs. The old code synchronized *trampoline_cr4_features *twice*, once in setup_real_mode() and once in setup_arch(). It also initialized mmu_cr4_features in setup_real_mode(), which causes the actual value of mmu_cr4_features to potentially depend on when setup_real_mode() is called. With this patch, mmu_cr4_features is initialized directly in setup_arch(), and *trampoline_cr4_features is synchronized to mmu_cr4_features when the trampoline is set up. After this patch, it should be safe to defer setup_real_mode(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d48a263f9912389b957dd495a7127b009259ffe0.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/boot: Run reserve_bios_regions() after we initialize the memory mapAndy Lutomirski
reserve_bios_regions() is a quirk that reserves memory that we might otherwise think is available. There's no need to run it so early, and running it before we have the memory map initialized with its non-quirky inputs makes it hard to make reserve_bios_regions() more intelligent. Move it right after we populate the memblock state. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/59f58618911005c799c6c9979ce6ae4881d907c2.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/irq: Do not substract irq_tlb_count from irq_call_countAaron Lu
Since commit: 52aec3308db8 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR") the TLB remote shootdown is done through call function vector. That commit didn't take care of irq_tlb_count, which a later commit: fd0f5869724f ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts") ... tried to fix. The fix assumes every increase of irq_tlb_count has a corresponding increase of irq_call_count. So the irq_call_count is always bigger than irq_tlb_count and we could substract irq_tlb_count from irq_call_count. Unfortunately this is not true for the smp_call_function_single() case. The IPI is only sent if the target CPU's call_single_queue is empty when adding a csd into it in generic_exec_single. That means if two threads are both adding flush tlb csds to the same CPU's call_single_queue, only one IPI is sent. In other words, the irq_call_count is incremented by 1 but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be bigger than irq_call_count and the substract will produce a very large irq_call_count value due to overflow. Considering that: 1) it's not worth to send more IPIs for the sake of accurate counting of irq_call_count in generic_exec_single(); 2) it's not easy to tell if the call function interrupt is for TLB shootdown in __smp_call_function_single_interrupt(). Not to exclude TLB shootdown from call function count seems to be the simplest fix and this patch just does that. This bug was found by LKP's cyclic performance regression tracking recently with the vm-scalability test suite. I have bisected to commit: 3dec0ba0be6a ("mm/rmap: share the i_mmap_rwsem") This commit didn't do anything wrong but revealed the irq_call_count problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file concurrent with multiple threads. When remap_one is try_to_unmap_one(), then multiple threads could queue flush TLB to the same CPU but only one IPI will be sent. Since the commit was added in Linux v3.19, the counting problem only shows up from v3.19 onwards. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/mm: Fix swap entry comment and macroDave Hansen
A recent patch changed the format of a swap PTE. The comment explaining the format of the swap PTE is wrong about the bits used for the swap type field. Amusingly, the ASCII art and the patch description are correct, but the comment itself is wrong. As I was looking at this, I also noticed that the SWP_OFFSET_FIRST_BIT has an off-by-one error. This does not really hurt anything. It just wasted a bit of space in the PTE, giving us 2^59 bytes of addressable space in our swapfiles instead of 2^60. But, it doesn't match with the comments, and it wastes a bit of space, so fix it. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Fixes: 00839ee3b299 ("x86/mm: Move swap offset/type up in PTE to work around erratum") Link: http://lkml.kernel.org/r/20160810172325.E56AD7DA@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11x86/mm/kaslr: Fix -Wformat-security warningNicolas Iooss
debug_putstr() is used to output strings without using printf-like formatting but debug_putstr(v) is defined as early_printk(v) in arch/x86/lib/kaslr.c. This makes clang reports the following warning when building with -Wformat-security: arch/x86/lib/kaslr.c:57:15: warning: format string is not a string literal (potentially insecure) [-Wformat-security] debug_putstr(purpose); ^~~~~~~ Fix this by using "%s" in early_printk(). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160806102039.27221-1-nicolas.iooss_linux@m4x.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer ↵Dave Hansen
manipulation The Memory Protection Keys "rights register" (PKRU) is XSAVE-managed, and is saved/restored along with the FPU state. When kernel code accesses FPU regsisters, it does a delicate dance with preempt. Otherwise, the context switching code can get confused as to whether the most up-to-date state is in the registers themselves or in the XSAVE buffer. But, PKRU is not a normal FPU register. Using it does not generate the normal device-not-available (#NM) exceptions which means we can not manage it lazily, and the kernel completley disallows using lazy mode when it is enabled. The dance with preempt *only* occurs when managing the FPU lazily. Since we never manage PKRU lazily, we do not have to do the dance with preempt; we can access it directly. Doing it this way saves a ton of complicated code (and is faster too). Further, the XSAVES reenabling failed to patch a bit of code in fpu__xfeature_set_state() the checked for compacted buffers. That check caused fpu__xfeature_set_state() to silently refuse to work when the kernel is using compacted XSAVE buffers. This broke execute-only and future pkey_mprotect() support when using compact XSAVE buffers. But, removing fpu__xfeature_set_state() gets rid of this issue, in addition to the nice cleanup and speedup. This fixes the same thing as a fix that Sai posted: https://lkml.org/lkml/2016/7/25/637 The fix that he posted is a much more obviously correct, but I think we should just do this instead. Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-Cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160727232040.7D060DAD@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tablesValdis Kletnieks
Building an X86_64 kernel with W=1 throws a total of 9,948 lines of warnings of this form for both 32-bit and 64-bit syscall tables. Given that the entire rest of the build for my config only generates 8,375 lines of output, this is a big reduction in the warnings generated. The warnings follow this pattern: ./arch/x86/include/generated/asm/syscalls_32.h:885:21: warning: initialized field overwritten [-Woverride-init] __SYSCALL_I386(379, compat_sys_pwritev2, ) ^ arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386' #define __SYSCALL_I386(nr, sym, qual) [nr] = sym, ^~~ ./arch/x86/include/generated/asm/syscalls_32.h:885:21: note: (near initialization for 'ia32_sys_call_table[379]') __SYSCALL_I386(379, compat_sys_pwritev2, ) ^ arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386' #define __SYSCALL_I386(nr, sym, qual) [nr] = sym, Since we intentionally build the syscall tables this way, ignore that one warning in the two files. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/7464.1470021890@turing-police.cc.vt.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systemsMike Travis
The latest UV kernel support panics when RHEL7 kexec's the kdump kernel to make a dumpfile. This patch fixes the problem by turning off all UV support if NUMA is off. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.577755634@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM valuesMike Travis
There are some circumstances where the UV4 BIOS cannot provide the correct Proximity Node values to associate with specific Sockets and Physical Nodes. The decision was made to remove these values from BIOS and for the kernel to get these values from the standard ACPI tables. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.414210079@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing ↵Mike Travis
a crash Save the uv_systab::size field before doing the iounmap() of the struct pointer, to avoid a NULL dereference crash. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.250424783@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguousMike Travis
The UV4 Socket IDs are not guaranteed to equate to Node values which can cause the GAM (Global Addressable Memory) table lookups to fail. Fix this by using an independent index into the GAM table instead of the Socket ID to reference the base address. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.048755337@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRETBorislav Petkov
Clarify why exactly RF cannot be restored properly by SYSRET to avoid confusion. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160803171429.GA2590@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/mm: Disable preemption during CR3 read+writeSebastian Andrzej Siewior
There's a subtle preemption race on UP kernels: Usually current->mm (and therefore mm->pgd) stays the same during the lifetime of a task so it does not matter if a task gets preempted during the read and write of the CR3. But then, there is this scenario on x86-UP: TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by: -> mmput() -> exit_mmap() -> tlb_finish_mmu() -> tlb_flush_mmu() -> tlb_flush_mmu_tlbonly() -> tlb_flush() -> flush_tlb_mm_range() -> __flush_tlb_up() -> __flush_tlb() -> __native_flush_tlb() At this point current->mm is NULL but current->active_mm still points to the "old" mm. Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its own mm so CR3 has changed. Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's mm and so CR3 remains unchanged. Once taskA gets active it continues where it was interrupted and that means it writes its old CR3 value back. Everything is fine because userland won't need its memory anymore. Now the fun part: Let's preempt taskA one more time and get back to taskB. This time switch_mm() won't do a thing because oldmm (->active_mm) is the same as mm (as per context_switch()). So we remain with a bad CR3 / PGD and return to userland. The next thing that happens is handle_mm_fault() with an address for the execution of its code in userland. handle_mm_fault() realizes that it has a PTE with proper rights so it returns doing nothing. But the CPU looks at the wrong PGD and insists that something is wrong and faults again. And again. And one more time… This pagefault circle continues until the scheduler gets tired of it and puts another task on the CPU. It gets little difficult if the task is a RT task with a high priority. The system will either freeze or it gets fixed by the software watchdog thread which usually runs at RT-max prio. But waiting for the watchdog will increase the latency of the RT task which is no good. Fix this by disabling preemption across the critical code section. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de [ Prettified the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/mm/KASLR: Increase BRK pages for KASLR memory randomizationThomas Garnier
Default implementation expects 6 pages maximum are needed for low page allocations. If KASLR memory randomization is enabled, the worse case of e820 layout would require 12 pages (no large pages). It is due to the PUD level randomization and the variable e820 memory layout. This bug was found while doing extensive testing of KASLR memory randomization on different type of hardware. Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kernel-hardening@lists.openwall.com Fixes: 021182e52fe0 ("Enable KASLR for physical mapping memory regions") Link: http://lkml.kernel.org/r/1470762665-88032-2-git-send-email-thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomizationThomas Garnier
Initialize KASLR memory randomization after max_pfn is initialized. Also ensure the size is rounded up. It could create problems on machines with more than 1Tb of memory on certain random addresses. Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kernel-hardening@lists.openwall.com Fixes: 021182e52fe0 ("Enable KASLR for physical mapping memory regions") Link: http://lkml.kernel.org/r/1470762665-88032-1-git-send-email-thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/hpet: Fix /dev/rtc breakage caused by RTC cleanupArnd Bergmann
Ville Syrjälä reports "The first time I run hwclock after rebooting I get this: open("/dev/rtc", O_RDONLY) = 3 ioctl(3, PHN_SET_REGS or RTC_UIE_ON, 0) = 0 select(4, [3], NULL, NULL, {10, 0}) = 0 (Timeout) ioctl(3, PHN_NOT_OH or RTC_UIE_OFF, 0) = 0 close(3) = 0 On all subsequent runs I get this: open("/dev/rtc", O_RDONLY) = 3 ioctl(3, PHN_SET_REGS or RTC_UIE_ON, 0) = -1 EINVAL (Invalid argument) ioctl(3, RTC_RD_TIME, 0x7ffd76b3ae70) = -1 EINVAL (Invalid argument) close(3) = 0" This was caused by a stupid typo in a patch that should have been a simple rename to move around contents of a header file, but accidentally wrote zeroes into the rtc rather than reading from it: 463a86304cae ("char/genrtc: x86: remove remnants of asm/rtc.h") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Borislav Petkov <bp@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rtc-linux@googlegroups.com Fixes: 463a86304cae ("char/genrtc: x86: remove remnants of asm/rtc.h") Link: http://lkml.kernel.org/r/20160809195528.1604312-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10Merge branch 'linus' into timers/urgent, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 18:30:36 +0000