summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2015-06-20x86/hpet: Check for irq==0 when allocating hpet MSI interruptsJiang Liu
irq == 0 is not a valid irq for a irqdomain MSI allocation, but hpet code checks only for negative return values. Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/558447AF.30703@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19KVM: x86/vPMU: reorder PMU functionsWei Huang
Keep called functions closer to their callers, and init/destroy functions next to each other. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86/vPMU: whitespace and stylistic adjustments in PMU codeWei Huang
Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86/vPMU: use the new macros to go between PMC, PMU and VCPUWei Huang
Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86/vPMU: introduce pmu.h headerWei Huang
This will be used for private function used by AMD- and Intel-specific PMU implementations. Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86/vPMU: rename a few PMU functionsWei Huang
Before introducing a pmu.h header for them, make the naming more consistent. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: do not map huge page for non-consistent rangeXiao Guangrong
Based on Intel's SDM, mapping huge page which do not have consistent memory cache for each 4k page will cause undefined behavior In order to avoiding this kind of undefined behavior, we force to use 4k pages under this case Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: simplify kvm_mtrr_get_guest_memory_typeXiao Guangrong
mtrr_for_each_mem_type() is ready now, use it to simplify kvm_mtrr_get_guest_memory_type() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: introduce mtrr_for_each_mem_typeXiao Guangrong
It walks all MTRRs and gets all the memory cache type setting for the specified range also it checks if the range is fully covered by MTRRs Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Adjust for range_size->range_shift change. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: introduce fixed_mtrr_addr_* functionsXiao Guangrong
Two functions are introduced: - fixed_mtrr_addr_to_seg() translates the address to the fixed MTRR segment - fixed_mtrr_addr_seg_to_range_index() translates the address to the index of kvm_mtrr.fixed_ranges[] They will be used in the later patch Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Adjust for range_size->range_shift change. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: sort variable MTRRsXiao Guangrong
Sort all valid variable MTRRs based on its base address, it will help us to check a range to see if it's fully contained in variable MTRRs Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Fix list insertion sort, simplify var_mtrr_range_is_valid to just test the V bit. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: introduce var_mtrr_rangeXiao Guangrong
It gets the range for the specified variable MTRR Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Simplify boolean operations. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: introduce fixed_mtrr_segment tableXiao Guangrong
This table summarizes the information of fixed MTRRs and introduce some APIs to abstract its operation which helps us to clean up the code and will be used in later patches Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Change range_size to range_shift, in order to avoid udivdi3 errors. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: improve kvm_mtrr_get_guest_memory_typeXiao Guangrong
- kvm_mtrr_get_guest_memory_type() only checks one page in MTRRs so that it's unnecessary to check to see if the range is partially covered in MTRR - optimize the check of overlap memory type and add some comments to explain the precedence Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: do not split 64 bits MSR contentXiao Guangrong
Variable MTRR MSRs are 64 bits which are directly accessed with full length, no reason to split them to two 32 bits Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: clean up mtrr default typeXiao Guangrong
Drop kvm_mtrr->enable, omit the decode/code workload and get rid of all the hard code Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: exactly define the size of variable MTRRsXiao Guangrong
Only KVM_NR_VAR_MTRR variable MTRRs are available in KVM guest Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: remove mtrr_state.have_fixedXiao Guangrong
vMTRR does not depend on any host MTRR feature and fixed MTRRs have always been implemented, so drop this field Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: MTRR: handle MSR_MTRRcap in kvm_mtrr_get_msrXiao Guangrong
MSR_MTRRcap is a MTRR msr so move the handler to the common place, also add some comments to make the hard code more readable Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86: move MTRR related code to a separate fileXiao Guangrong
MTRR code locates in x86.c and mmu.c so that move them to a separate file to make the organization more clearer and it will be the place where we fully implement vMTRR Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: x86: fix CR0.CD virtualizationXiao Guangrong
Currently, CR0.CD is not checked when we virtualize memory cache type for noncoherent_dma guests, this patch fixes it by : - setting UC for all memory if CR0.CD = 1 - zapping all the last sptes in MMU if CR0.CD is changed Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19KVM: nSVM: Check for NRIPS support before updating control fieldBandan Das
If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present. Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19Merge branch 'mvebu/drivers' of ↵Herbert Xu
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Merge the mvebu/drivers branch of the arm-soc tree which contains just a single patch bfa1ce5f38938cc9e6c7f2d1011f88eba2b9e2b2 ("bus: mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be a prerequisite of the new marvell/cesa crypto driver.
2015-06-19x86/boot: Fix overflow warning with 32-bit binutilsBorislav Petkov
When building the kernel with 32-bit binutils built with support only for the i386 target, we get the following warning: arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31) The problem is that in that case, binutils' internal type representation is 32-bit wide and the shift range overflows. In order to fix this, manipulate the shift expression which creates the 4GiB constant to not overflow the shift count. Suggested-by: Michael Matz <matz@suse.de> Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-19perf/x86: Honor the architectural performance monitoring versionPalik, Imre
Architectural performance monitoring, version 1, doesn't support fixed counters. Currently, even if a hypervisor advertises support for architectural performance monitoring version 1, perf may still try to use the fixed counters, as the constraints are set up based on the CPU model. This patch ensures that perf honors the architectural performance monitoring version returned by CPUID, and it only uses the fixed counters for version 2 and above. (Some of the ideas in this patch came from Peter Zijlstra.) Signed-off-by: Imre Palik <imrep@amazon.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433767609-1039-1-git-send-email-imrep.amz@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-19perf/x86/intel: Fix PMI handling for Intel PTAlexander Shishkin
Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-19perf/x86/intel/bts: Fix DS area sharing with x86_pmu eventsAlexander Shishkin
Currently, the intel_bts driver relies on the DS area allocated by the x86_pmu code in its event_init() path, which is a bug: creating a BTS event while no x86_pmu events are present results in a NULL pointer dereference. The same DS area is also used by PEBS sampling, which makes it quite a bit trickier to have a separate one for intel_bts' purposes. This patch makes intel_bts driver use the same DS allocation and reference counting code as x86_pmu to make sure it is always present when either intel_bts or x86_pmu need it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/1434024837-9916-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-19perf/x86: Add more Broadwell model numbersAndi Kleen
This patch adds additional model numbers for Broadwell to perf. Support for Broadwell with Iris Pro (Intel Core i7-57xxC) and support for Broadwell Server Xeon. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1434055942-28253-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-18x86/cpu/amd: Give access to the number of nodes in a physical packageAravind Gopalakrishnan
Stash the number of nodes in a physical processor package locally and add an accessor to be called by interested parties. The first user is the MCE injection module which uses it to find the node base core in a package for injecting a certain type of errors. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Rewrote the commit message, merged it with the accessor patch and unified naming. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mchehab@osg.samsung.com Link: http://lkml.kernel.org/r/1433868317-18417-2-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-18x86/platform/intel/baytrail: Add comments about why we disabled HPET on BaytrailFeng Tang
This question has been asked many times, and finally I found the official document which explains the problem of HPET on Baytrail, that it will halt in deep idle states. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john.stultz@linaro.org Cc: len.brown@intel.com Cc: matthew.lee@intel.com Link: http://lkml.kernel.org/r/1434361201-31743-1-git-send-email-feng.tang@intel.com [ Prettified things a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-17Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm bugfix from Marcelo Tosatti: "Rrestore APIC migration functionality" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix lapic.timer_mode on restore
2015-06-17Merge branch 'pci/resource' into nextBjorn Helgaas
* pci/resource: x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
2015-06-17x86/PCI: Use host bridge _CRS info on systems with >32 bit addressingBjorn Helgaas
We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by: Juan Dayer <jdayer@outlook.com> Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+
2015-06-16kconfig: add xenconfig defconfig helperLuis R. Rodriguez
This lets you build a kernel which can support xen dom0 or xen guests on i386, x86-64 and arm64 by just using: make xenconfig You can start from an allnoconfig and then switch to xenconfig. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config. Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one. A few generic notes: we enable both of these: CONFIG_INET=y CONFIG_BINFMT_ELF=y although technically not required given you likely will end up with a pretty useless system otherwise. A few architectural differences worth noting: $ make allnoconfig; make xenconfig > /dev/null ; \ grep XEN .config > 64-bit-config $ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \ grep XEN .config > 32-bit-config $ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \ grep XEN .config > arm64-config Since the options are already split up with a generic config and architecture specific configs you anything on the x86 configs are known to only work right now on x86. For instance arm64 doesn't support MEMORY_HOTPLUG yet as such although we try to enabe it generically arm64 doesn't have it yet, so we leave the xen specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config file to set expecations correctly. Then on x86 we have differences between i386 and x86-64. The difference between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as this is only supported on 64-bit. You also do not get on i386 XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical reasons to not allow this but I gave up after a few attempts. Cc: Josh Triplett <josh@joshtriplett.org> Cc: Borislav Petkov <bp@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: penberg@kernel.org Cc: levinsasha928@gmail.com Cc: mtosatti@redhat.com Cc: fengguang.wu@intel.com Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Julien Grall <julien.grall@linaro.org> Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-06-16KVM: x86: fix lapic.timer_mode on restoreRadim Krčmář
lapic.timer_mode was not properly initialized after migration, which broke few useful things, like login, by making every sleep eternal. Fix this by calling apic_update_lvtt in kvm_apic_post_state_restore. There are other slowpaths that update lvtt, so this patch makes sure something similar doesn't happen again by calling apic_update_lvtt after every modification. Cc: stable@vger.kernel.org Fixes: f30ebc312ca9 ("KVM: x86: optimize some accesses to LVTT and SPIV") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-06-15crypto: aesni - fix crypto_fpu_exit() section mismatchJeremiah Mahler
The '__init aesni_init()' function calls the '__exit crypto_fpu_exit()' function directly. Since they are in different sections, this generates a warning. make CONFIG_DEBUG_SECTION_MISMATCH=y ... WARNING: arch/x86/crypto/aesni-intel.o(.init.text+0x12b): Section mismatch in reference from the function init_module() to the function .exit.text:crypto_fpu_exit() The function __init init_module() references a function __exit crypto_fpu_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of crypto_fpu_exit() so it may be used outside an exit section. Fix the warning by removing the __exit annotation. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-14Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A regression fix for a crash, and a Intel HSW uncore PMU driver fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization" perf/x86/intel/uncore: Fix CBOX bit wide and UBOX reg on Haswell-EP
2015-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-06-12iommu, x86: Provide irq_remapping_cap() interfaceFeng Wu
Add a new interface irq_remapping_cap() to detect whether irq remapping supports new features, such as VT-d Posted-Interrupts. Export the function, so that KVM code can check this and use this mechanism properly. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-10-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chipFeng Wu
Interrupt chip callback to set the VCPU affinity for posted interrupts. [ tglx: Use the helper function to copy from the remap irte instead of open coding it. Massage the comment as well ] Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: iommu@lists.linux-foundation.org Cc: joro@8bytes.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-5-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu: Add new member capability to struct irq_remap_opsFeng Wu
Add a new member 'capability' to struct irq_remap_ops for storing information about available capabilities such as VT-d Posted-Interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-2-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12x86/fpu: Fix double-increment in setup_xstate_features()Dave Hansen
I noticed that my MPX tracepoints were producing garbage for the lower and upper bounds: mpx_bounds_register_exception: address referenced: 0x00007fffffffccb7 bounds: lower: 0x0 ~upper: 0xffffffffffffffff mpx_bounds_register_exception: address referenced: 0x00007fffffffccbf bounds: lower: 0x0 ~upper: 0xffffffffffffffff This is, of course, bogus because 0x00007fffffffccbf is *within* the bounds. I assumed that my instruction decoder was bad and went looking at it. But I eventually realized that I was getting a '0' offset back from xstate_offsets[BNDREGS]. It was being skipped in the initialization, which is obviously bogus, so remove the extra leaf++. This also goes an initializes xstate_offsets/sizes[] to -1 so so that bugs like this will oops instead of silently failing in interesting ways. This was introduced by: 39f1acd ("x86/fpu/xstate: Don't assume the first zero xfeatures zero bit means the end") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Link: http://lkml.kernel.org/r/20150611193400.2E0B00DB@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-11x86/crash: Allocate enough low memory when crashkernel=highJoerg Roedel
When the crash kernel is loaded above 4GiB in memory, the first kernel allocates only 72MiB of low-memory for the DMA requirements of the second kernel. On systems with many devices this is not enough and causes device driver initialization errors and failed crash dumps. Testing by SUSE and Redhat has shown that 256MiB is a good default value for now and the discussion has lead to this value as well. So set this default value to 256MiB to make sure there is enough memory available for DMA. Signed-off-by: Joerg Roedel <jroedel@suse.de> [ Reflow comment. ] Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Baoquan He <bhe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jörg Rödel <joro@8bytes.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1433500202-25531-4-git-send-email-joro@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-11x86/swiotlb: Try coherent allocations with __GFP_NOWARNJoerg Roedel
When we boot a kdump kernel in high memory, there is by default only 72MB of low memory available. The swiotlb code takes 64MB of it (by default) so that there are only 8MB left to allocate from. On systems with many devices this causes page allocator warnings from dma_generic_alloc_coherent(): systemd-udevd: page allocation failure: order:0, mode:0x280d4 CPU: 0 PID: 197 Comm: systemd-udevd Tainted: G W 3.12.28-4-default #1 Hardware name: HP ProLiant DL980 G7, BIOS P66 07/30/2012 ffff8800781335e0 ffffffff8150b1db 00000000000280d4 ffffffff8113af90 0000000000000000 0000000000000000 ffff88007efdbb00 0000000100000000 0000000000000000 0000000000000000 0000000000000000 0000000000000001 Call Trace: dump_trace+0x7d/0x2d0 show_stack_log_lvl+0x94/0x170 show_stack+0x21/0x50 dump_stack+0x41/0x51 warn_alloc_failed+0xf0/0x160 __alloc_pages_slowpath+0x72f/0x796 __alloc_pages_nodemask+0x1ea/0x210 dma_generic_alloc_coherent+0x96/0x140 x86_swiotlb_alloc_coherent+0x1c/0x50 ttm_dma_pool_alloc_new_pages+0xab/0x320 [ttm] ttm_dma_populate+0x3ce/0x640 [ttm] ttm_tt_bind+0x36/0x60 [ttm] ttm_bo_handle_move_mem+0x55f/0x5c0 [ttm] ttm_bo_move_buffer+0x105/0x130 [ttm] ttm_bo_validate+0xc1/0x130 [ttm] ttm_bo_init+0x24b/0x400 [ttm] radeon_bo_create+0x16c/0x200 [radeon] radeon_ring_init+0x11e/0x2b0 [radeon] r100_cp_init+0x123/0x5b0 [radeon] r100_startup+0x194/0x230 [radeon] r100_init+0x223/0x410 [radeon] radeon_device_init+0x6af/0x830 [radeon] radeon_driver_load_kms+0x89/0x180 [radeon] drm_get_pci_dev+0x121/0x2f0 [drm] local_pci_probe+0x39/0x60 pci_device_probe+0xa9/0x120 driver_probe_device+0x9d/0x3d0 __driver_attach+0x8b/0x90 bus_for_each_dev+0x5b/0x90 bus_add_driver+0x1f8/0x2c0 driver_register+0x5b/0xe0 do_one_initcall+0xf2/0x1a0 load_module+0x1207/0x1c70 SYSC_finit_module+0x75/0xa0 system_call_fastpath+0x16/0x1b 0x7fac533d2788 After these warnings the code enters a fall-back path and allocated directly from the swiotlb aperture in the end. So remove these warnings as this is not a fatal error. Signed-off-by: Joerg Roedel <jroedel@suse.de> [ Simplify, reflow comment. ] Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Baoquan He <bhe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jörg Rödel <joro@8bytes.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1433500202-25531-3-git-send-email-joro@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-10arch/x86/kvm/mmu.c: work around gcc-4.4.4 bugAndrew Morton
Fix this compile issue with gcc-4.4.4: arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7dc4ceef6 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode codeAndy Lutomirski
The error_entry/error_exit code to handle gsbase and whether we return to user mdoe was a mess: - error_sti was misnamed. In particular, it did not enable interrupts. - Error handling for gs_change was hopelessly tangled the normal usermode path. Separate it out. This saves a branch in normal entries from kernel mode. - The comments were bad. Fix it up. As a nice side effect, there's now a code path that happens on error entries from user mode. We'll use it soon. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f1be898ab93360169fb845ab85185948832209ee.1433878454.git.luto@kernel.org [ Prettified it, clarified comments some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-10x86/asm/entry/32: Shorten __audit_syscall_entry() args preparationDenys Vlasenko
We use three MOVs to swap edx and ecx. We can use one XCHG instead. Expand the comments. It's difficult to keep track which arg# every register corresponds to, so spell it out. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433876051-26604-3-git-send-email-dvlasenk@redhat.com [ Expanded the comments some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-10x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()Denys Vlasenko
Here it is not obvious why we load pt_regs->cx to %esi etc. Lets improve comments. Explain that here we combine two things: first, we reload registers since some of them are clobbered by the C function we just called; and we also convert 32-bit syscall params to 64-bit C ABI, because we are going to jump back to syscall dispatch code. Move reloading of 6th argument into the macro instead of having it after each of two macro invocations. No actual code changes here. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433876051-26604-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-10x86/asm/entry/32: Fix fallout from the R9 trick removal in the SYSCALL codeDenys Vlasenko
I put %ebp restoration code too late. Under strace, it is not reached and %ebp is not restored upon return to userspace. This is the fix. Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433876051-26604-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237ABjorn Helgaas
The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299): bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored) pci 0000:80:01.0: [1106:3288] type 0 class 0x000403 pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit] pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] BUG: unable to handle kernel paging request at ffffc90000378000 IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel] We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work. Turn on pci=use_crs automatically for this system. Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 05:18:44 +0000