summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2010-03-01KVM: mark segments accessed on HW task switchGleb Natapov
On HW task switch newly loaded segments should me marked as accessed. Reported-by: Lorenzo Martignoni <martignlo@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Pass cr0.mp through to the guest when the fpu is activeAvi Kivity
When cr0.mp is clear, the guest doesn't expect a #NM in response to a WAIT instruction. Because we always keep cr0.mp set, it will get a #NM, and potentially be confused. Fix by keeping cr0.mp set only when the fpu is inactive, and passing it through when inactive. Reported-by: Lorenzo Martignoni <martignlo@gmail.com> Analyzed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: MMU: Remove some useless code from alloc_mmu_pages()Wei Yongjun
If we fail to alloc page for vcpu->arch.mmu.pae_root, call to free_mmu_pages() is unnecessary, which just do free the page malloc for vcpu->arch.mmu.pae_root. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: trace guest fpu loads and unloadsAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Optimize kvm_read_cr[04]_bits()Avi Kivity
'mask' is always a constant, so we can check whether it includes a bit that might be owned by the guest very cheaply, and avoid the decache call. Saves a few hundred bytes of module text. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Rename vcpu->shadow_efer to eferAvi Kivity
None of the other registers have the shadow_ prefix. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Move cr0/cr4/efer related helpers to x86.hAvi Kivity
They have more general scope than the mmu. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Add a helper for checking if the guest is in protected modeAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Activate fpu on cltsAvi Kivity
Assume that if the guest executes clts, it knows what it's doing, and load the guest fpu to prevent an #NM exception. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Drop kvm_{load,put}_guest_fpu() exportsAvi Kivity
Not used anymore. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Allow kvm_load_guest_fpu() even when !vcpu->fpu_activeAvi Kivity
This allows accessing the guest fpu from the instruction emulator, as well as being symmetric with kvm_put_guest_fpu(). Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: x86: fix checking of cr0 validityGleb Natapov
Move to/from Control Registers chapter of Intel SDM says. "Reserved bits in CR0 remain clear after any load of those registers; attempts to set them have no impact". Control Register chapter says "Bits 63:32 of CR0 are reserved and must be written with zeros. Writing a nonzero value to any of the upper 32 bits results in a general-protection exception, #GP(0)." This patch tries to implement this twisted logic. Signed-off-by: Gleb Natapov <gleb@redhat.com> Reported-by: Lorenzo Martignoni <martignlo@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: SVM: Trap all debug register accessesJan Kiszka
To enable proper debug register emulation under all conditions, trap access to all DR0..7. This may be optimized later on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: SVM: Clean up and enhance mov dr emulationJan Kiszka
Enhance mov dr instruction emulation used by SVM so that it properly handles dr4/5: alias to dr6/7 if cr4.de is cleared. Otherwise return EMULATE_FAIL which will let our only possible caller in that scenario, ud_interception, re-inject UD. We do not need to inject faults, SVM does this for us (exceptions take precedence over instruction interceptions). For the same reason, the value overflow checks can be removed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Clean up DR6 emulationJan Kiszka
As we trap all debug register accesses, we do not need to switch real DR6 at all. Clean up update_exception_bitmap at this chance, too. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Fix emulation of DR4 and DR5Jan Kiszka
Make sure DR4 and DR5 are aliased to DR6 and DR7, respectively, if CR4.DE is not set. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Fix exceptions of mov to drJan Kiszka
Injecting GP without an error code is a bad idea (causes unhandled guest exits). Moreover, we must not skip the instruction if we injected an exception. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: x86: Use macros for x86_emulate_ops to avoid future mistakesTakuya Yoshikawa
The return values from x86_emulate_ops are defined in kvm_emulate.h as macros X86EMUL_*. But in emulate.c, we are comparing the return values from these ops with 0 to check if they're X86EMUL_CONTINUE or not: X86EMUL_CONTINUE is defined as 0 now. To avoid possible mistakes in the future, this patch substitutes "X86EMUL_CONTINUE" for "0" that are being compared with the return values from x86_emulate_ops. We think that there are more places we should use these macros, but the meanings of rc values in x86_emulate_insn() were not so clear at a glance. If we use proper macros in this function, we would be able to follow the flow of each emulation more easily and, maybe, more securely. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: fix cleanup_srcu_struct on vm destructionMarcelo Tosatti
cleanup_srcu_struct on VM destruction remains broken: BUG: unable to handle kernel paging request at ffffffffffffffff IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 RIP: 0010:[<ffffffff802533d2>] [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 Call Trace: [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm] [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm] [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel] [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm] [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm] Move it to kvm_arch_destroy_vm. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-03-01KVM: fix Hyper-V hypercall warnings and wrong mask valueGleb Natapov
Fix compilation warnings and wrong mask value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Remove emulation failure reportSheng Yang
As Avi noted: >There are two problems with the kernel failure report. First, it >doesn't report enough data - registers, surrounding instructions, etc. >that are needed to explain what is going on. Second, it can flood >dmesg, which is a pretty bad thing to do. So we remove the emulation failure report in handle_invalid_guest_state(), and would inspected the guest using userspace tool in the future. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: export <asm/hyperv.h>Avi Kivity
Needed by <asm/kvm_para.h>. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: rename is_writeble_pte() to is_writable_pte()Takuya Yoshikawa
There are two spellings of "writable" in arch/x86/kvm/mmu.c and paging_tmpl.h . This patch renames is_writeble_pte() to is_writable_pte() and makes grepping easy. New name is consistent with the definition of itself: return pte & PT_WRITABLE_MASK; Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Implement NotifyLongSpinWait HYPER-V hypercallGleb Natapov
Windows issues this hypercall after guest was spinning on a spinlock for too many iterations. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Add HYPER-V apic access MSRsGleb Natapov
Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Implement bare minimum of HYPER-V MSRsGleb Natapov
Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and VP_INDEX MSRs. [avi: fix build on i386] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Add HYPER-V header fileGleb Natapov
Provide HYPER-V related defines that will be used by following patches. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: SVM: Lazy fpu with nptAvi Kivity
Now that we can allow the guest to play with cr0 when the fpu is loaded, we can enable lazy fpu when npt is in use. Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: SVM: Selective cr0 interceptAvi Kivity
If two conditions apply: - no bits outside TS and EM differ between the host and guest cr0 - the fpu is active then we can activate the selective cr0 write intercept and drop the unconditional cr0 read and write intercept, and allow the guest to run with the host fpu state. This reduces cr0 exits due to guest fpu management while the guest fpu is loaded. Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: SVM: Restore unconditional cr0 intercept under nptAvi Kivity
Currently we don't intercept cr0 at all when npt is enabled. This improves performance but requires us to activate the fpu at all times. Remove this behaviour in preparation for adding selective cr0 intercepts. Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: SVM: Initialize fpu_active in init_vmcb()Avi Kivity
init_vmcb() sets up the intercepts as if the fpu is active, so initialize it there. This avoids an INIT from setting up intercepts inconsistent with fpu_active. Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: SVM: Fix SVM_CR0_SELECTIVE_MASKAvi Kivity
Instead of selecting TS and MP as the comments say, the macro included TS and PE. Luckily the macro is unused now, but fix in order to save a few hours of debugging from anyone who attempts to use it. Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Set cr0.et when the guest writes cr0Avi Kivity
Follow the hardware. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: VMX: Give the guest ownership of cr0.ts when the fpu is activeAvi Kivity
If the guest fpu is loaded, there is nothing interesing about cr0.ts; let the guest play with it as it will. This makes context switches between fpu intensive guest processes faster, as we won't trap the clts and cr0 write instructions. [marcelo: fix cr0 read shadow update on fpu deactivation; kills F8 install] Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Lazify fpu activation and deactivationAvi Kivity
Defer fpu deactivation as much as possible - if the guest fpu is loaded, keep it loaded until the next heavyweight exit (where we are forced to unload it). This reduces unnecessary exits. We also defer fpu activation on clts; while clts signals the intent to use the fpu, we can't be sure the guest will actually use it. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: VMX: Allow the guest to own some cr0 bitsAvi Kivity
We will use this later to give the guest ownership of cr0.ts. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Replace read accesses of vcpu->arch.cr0 by an accessorAvi Kivity
Since we'd like to allow the guest to own a few bits of cr0 at times, we need to know when we access those bits. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: VMX: trace clts and lmsw instructions as cr accessesAvi Kivity
clts writes cr0.ts; lmsw writes cr0[0:15] - record that in ftrace. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: Fix the explanation of write_emulatedTakuya Yoshikawa
The explanation of write_emulated is confused with that of read_emulated. This patch fix it. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: VMX: Enable EPT 1GB page supportSheng Yang
Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: x86: Rename gb_page_enable() to get_lpage_level() in kvm_x86_opsSheng Yang
Then the callback can provide the maximum supported large page level, which is more flexible. Also move the gb page support into x86_64 specific. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: x86: Moving PT_*_LEVEL to mmu.hSheng Yang
We can use them in x86.c and vmx.c now... Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Fill out ftrace exit reason stringsAvi Kivity
Some exit reasons missed their strings; fill out the table. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: Bump maximum vcpu count to 64Avi Kivity
With slots_lock converted to rcu, the entire kvm hotpath on modern processors (with npt or ept) now scales beautifully. Increase the maximum vcpu count to 64 to reflect this. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: convert slots_lock to a mutexMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: switch vcpu context to use SRCUMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: convert io_bus to SRCUMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: x86: switch kvm_set_memory_alias to SRCU updateMarcelo Tosatti
Using a similar two-step procedure as for memslots. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: use SRCU for dirty logMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU updateMarcelo Tosatti
Use two steps for memslot deletion: mark the slot invalid (which stops instantiation of new shadow pages for that slot, but allows destruction), then instantiate the new empty slot. Also simplifies kvm_handle_hva locking. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-27 12:37:02 +0000