| Age | Commit message (Collapse) | Author |
|---|
|
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
arch/x86/net/bpf_jit_comp32.c:1478:50-55: WARNING: conversion to bool not needed here
arch/x86/net/bpf_jit_comp32.c:1479:50-55: WARNING: conversion to bool not needed here
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200506140352.37154-1-yanaijie@huawei.com
|
|
When verifier_zext is true, we don't need to emit code
for zero-extension.
Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
|
|
The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.
This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
|
|
The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:
EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.
This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
|
|
This patch fixes an encoding bug in emit_stx for BPF_B when the source
register is BPF_REG_FP.
The current implementation for BPF_STX BPF_B in emit_stx saves one REX
byte when the operands can be encoded using Mod-R/M alone. The lower 8
bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
(e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
equivalents (%sil, %dil, %bpl, %spl).
The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
required REX prefix. However, it misses the case when the source is
BPF_REG_FP (mapped to %rbp).
The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
will read from register %ch instead of the correct %bpl. This patch fixes
the problem by fixing and refactoring the check on which registers need
the extra REX byte. Since no BPF registers map to %rsp, there is no need
to handle %spl.
Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fmod_ret progs are emitted as:
start = __bpf_prog_enter();
call fmod_ret
*(u64 *)(rbp - 8) = rax
__bpf_prog_exit(, start);
test eax, eax
jne do_fexit
That 'test eax, eax' is working by accident. The compiler is free to use rax
inside __bpf_prog_exit() or inside functions that __bpf_prog_exit() is calling.
Which caused "test_progs -t modify_return" to sporadically fail depending on
compiler version and kconfig. Fix it by using 'cmp [rbp - 8], 0' instead of
'test eax, eax'.
Fixes: ae24082331d9 ("bpf: Introduce BPF_MODIFY_RETURN")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200311003906.3643037-1-ast@kernel.org
|
|
The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper
32 bits of operand registers are non-zero in certain situations.
The problem is in the following code:
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X:
...
/* and dreg_lo,sreg_lo */
EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo));
/* and dreg_hi,sreg_hi */
EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi));
/* or dreg_lo,dreg_hi */
EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi));
This code checks the upper bits of the operand registers regardless if
the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and
dreg_lo are not loaded from the stack for BPF_JMP32, however, they can
still be polluted with values from previous instructions.
The following BPF program demonstrates the bug. The jset64 instruction
loads the temporary registers and performs the jump, since ((u64)r7 &
(u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower
32 bits are all zero, however, the current JIT will take the branch due
the pollution of temporary registers from the earlier jset64.
mov64 r0, 0
ld64 r7, 0x8000000000000000
ld64 r8, 0x8000000000000000
jset64 r7, r8, 1
exit
jset32 r7, r8, 1
mov64 r0, 2
exit
The expected return value of this program is 2; under the buggy x32 JIT
it returns 0. The fix is to skip using the upper 32 bits for jset32 and
compare the upper 32 bits for jset64 only.
All tests in test_bpf.ko and selftests/bpf/test_verifier continue to
pass with this change.
We found this bug using our automated verification tool, Serval.
Fixes: 69f827eb6e14 ("x32: bpf: implement jitting of JMP32")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com
|
|
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
|
|
* Split the invoke_bpf program to prepare for special handling of
fmod_ret programs introduced in a subsequent patch.
* Move the definition of emit_cond_near_jump and emit_nops as they are
needed for fmod_ret.
* Refactor branch target alignment into its own generic helper function
i.e. emit_align.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-3-kpsingh@chromium.org
|
|
As we need to introduce a third type of attachment for trampolines, the
flattened signature of arch_prepare_bpf_trampoline gets even more
complicated.
Refactor the prog and count argument to arch_prepare_bpf_trampoline to
use bpf_tramp_progs to simplify the addition and accounting for new
attachment types.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-2-kpsingh@chromium.org
|
|
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
|
>From Intel 64 and IA-32 Architectures Optimization Reference Manual,
3.4.1.4 Code Alignment, Assembly/Compiler Coding Rule 11: All branch
targets should be 16-byte aligned.
This commits aligns branch targets according to the Intel manual.
The nops used to align branch targets make the dispatcher larger, and
therefore the number of supported dispatch points/programs are
descreased from 64 to 48.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-7-bjorn.topel@gmail.com
|
|
The BPF dispatcher is a multi-way branch code generator, mainly
targeted for XDP programs. When an XDP program is executed via the
bpf_prog_run_xdp(), it is invoked via an indirect call. The indirect
call has a substantial performance impact, when retpolines are
enabled. The dispatcher transform indirect calls to direct calls, and
therefore avoids the retpoline. The dispatcher is generated using the
BPF JIT, and relies on text poking provided by bpf_arch_text_poke().
The dispatcher hijacks a trampoline function it via the __fentry__ nop
of the trampoline. One dispatcher instance currently supports up to 64
dispatch points. A user creates a dispatcher with its corresponding
trampoline with the DEFINE_BPF_DISPATCHER macro.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-3-bjorn.topel@gmail.com
|
|
Given that we have BPF_MOD_NOP_TO_{CALL,JUMP}, BPF_MOD_{CALL,JUMP}_TO_NOP
and BPF_MOD_{CALL,JUMP}_TO_{CALL,JUMP} poke types and that we also pass in
old_addr as well as new_addr, it's a bit redundant and unnecessarily
complicates __bpf_arch_text_poke() itself since we can derive the same from
the *_addr that were passed in. Hence simplify and use BPF_MOD_{CALL,JUMP}
as types which also allows to clean up call-sites.
In addition to that, __bpf_arch_text_poke() currently verifies that text
matches expected old_insn before we invoke text_poke_bp(). Also add a check
on new_insn and skip rewrite if it already matches. Reason why this is rather
useful is that it avoids making any special casing in prog_array_map_poke_run()
when old and new prog were NULL and has the benefit that also for this case
we perform a check on text whether it really matches our expectations.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/fcb00a2b0b288d6c73de4ef58116a821c8fe8f2f.1574555798.git.daniel@iogearbox.net
|
|
Add initial code emission for *direct* jumps for tail call maps in
order to avoid the retpoline overhead from a493a87f38cf ("bpf, x64:
implement retpoline for tail call") for situations that allow for
it, meaning, for known constant keys at verification time which are
used as index into the tail call map. In case of Cilium which makes
heavy use of tail calls, constant keys are used in the vast majority,
only for a single occurrence we use a dynamic key.
High level outline is that if the target prog is NULL in the map, we
emit a 5-byte nop for the fall-through case and if not, we emit a
5-byte direct relative jmp to the target bpf_func + skipped prologue
offset. Later during runtime, we patch these 5-byte nop/jmps upon
tail call map update or deletions dynamically. Note that on x86-64
the direct jmp works as we reuse the same stack frame and skip
prologue (as opposed to some other JIT implementations).
One of the issues is that the tail call map slots can change at any
given time even during JITing. Therefore, we have two passes: i) emit
nops for all patchable locations during main JITing phase until we
declare prog->jited = 1 eventually. At this point the image is stable,
not public yet and with all jmps disabled. While JITing, we collect
additional info like poke->ip in order to remember the patch location
for later modifications. In ii) bpf_tail_call_direct_fixup() walks
over the progs poke_tab, locks the tail call maps poke_mutex to
prevent from parallel updates and patches in the right locations via
__bpf_arch_text_poke(). Note, the main bpf_arch_text_poke() cannot
be used at this point since we're not yet exposed to kallsyms. For
the update we use plain memcpy() since the image is not public and
still in read-write mode. After patching, we activate that poke entry
through poke->ip_stable. Meaning, at this point any tail call map
updates/deletions are not going to ignore that poke entry anymore.
Then, bpf_arch_text_poke() might still occur on the read-write image
until we finally locked it as read-only. Both modifications on the
given image are under text_mutex to avoid interference with each
other when update requests come in in parallel for different tail
call maps (current one we have locked in JIT and different one where
poke->ip_stable was already set).
Example prog:
# ./bpftool p d x i 1655
0: (b7) r3 = 0
1: (18) r2 = map[id:526]
3: (85) call bpf_tail_call#12
4: (b7) r0 = 1
5: (95) exit
Before:
# ./bpftool p d j i 1655
0xffffffffc076e55c:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0 _
19: xor %edx,%edx |_ index (arg 3)
1b: movabs $0xffff88d95cc82600,%rsi |_ map (arg 2)
25: mov %edx,%edx | index >= array->map.max_entries
27: cmp %edx,0x24(%rsi) |
2a: jbe 0x0000000000000066 |_
2c: mov -0x224(%rbp),%eax | tail call limit check
32: cmp $0x20,%eax |
35: ja 0x0000000000000066 |
37: add $0x1,%eax |
3a: mov %eax,-0x224(%rbp) |_
40: mov 0xd0(%rsi,%rdx,8),%rax |_ prog = array->ptrs[index]
48: test %rax,%rax | prog == NULL check
4b: je 0x0000000000000066 |_
4d: mov 0x30(%rax),%rax | goto *(prog->bpf_func + prologue_size)
51: add $0x19,%rax |
55: callq 0x0000000000000061 | retpoline for indirect jump
5a: pause |
5c: lfence |
5f: jmp 0x000000000000005a |
61: mov %rax,(%rsp) |
65: retq |_
66: mov $0x1,%eax
6b: pop %rbx
6c: pop %r15
6e: pop %r14
70: pop %r13
72: pop %rbx
73: leaveq
74: retq
After; state after JIT:
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0 _
19: xor %edx,%edx |_ index (arg 3)
1b: movabs $0xffff9d8afd74c000,%rsi |_ map (arg 2)
25: mov -0x224(%rbp),%eax | tail call limit check
2b: cmp $0x20,%eax |
2e: ja 0x000000000000003e |
30: add $0x1,%eax |
33: mov %eax,-0x224(%rbp) |_
39: jmpq 0xfffffffffffd1785 |_ [direct] goto *(prog->bpf_func + prologue_size)
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
After; state after map update (target prog):
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0
19: xor %edx,%edx
1b: movabs $0xffff9d8afd74c000,%rsi
25: mov -0x224(%rbp),%eax
2b: cmp $0x20,%eax .
2e: ja 0x000000000000003e .
30: add $0x1,%eax .
33: mov %eax,-0x224(%rbp) |_
39: jmpq 0xffffffffffb09f55 |_ goto *(prog->bpf_func + prologue_size)
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
After; state after map update (no prog):
# ./bpftool p d j i 1655
0xffffffffc08e8930:
0: nopl 0x0(%rax,%rax,1)
5: push %rbp
6: mov %rsp,%rbp
9: sub $0x200,%rsp
10: push %rbx
11: push %r13
13: push %r14
15: push %r15
17: pushq $0x0
19: xor %edx,%edx
1b: movabs $0xffff9d8afd74c000,%rsi
25: mov -0x224(%rbp),%eax
2b: cmp $0x20,%eax .
2e: ja 0x000000000000003e .
30: add $0x1,%eax .
33: mov %eax,-0x224(%rbp) |_
39: nopl 0x0(%rax,%rax,1) |_ fall-through nop
3e: mov $0x1,%eax
43: pop %rbx
44: pop %r15
46: pop %r14
48: pop %r13
4a: pop %rbx
4b: leaveq
4c: retq
Nice bonus is that this also shrinks the code emission quite a bit
for every tail call invocation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/6ada4c1c9d35eeb5f4ecfab94593dafa6b5c4b09.1574452833.git.daniel@iogearbox.net
|
|
Add BPF_MOD_{NOP_TO_JUMP,JUMP_TO_JUMP,JUMP_TO_NOP} patching for x86
JIT in order to be able to patch direct jumps or nop them out. We need
this facility in order to patch tail call jumps and in later work also
BPF static keys.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/aa4784196a8e5e985af4b30a4fe5336bce6e9643.1574452833.git.daniel@iogearbox.net
|
|
Allow FENTRY/FEXIT BPF programs to attach to other BPF programs of any type
including their subprograms. This feature allows snooping on input and output
packets in XDP, TC programs including their return values. In order to do that
the verifier needs to track types not only of vmlinux, but types of other BPF
programs as well. The verifier also needs to translate uapi/linux/bpf.h types
used by networking programs into kernel internal BTF types used by FENTRY/FEXIT
BPF programs. In some cases LLVM optimizations can remove arguments from BPF
subprograms without adjusting BTF info that LLVM backend knows. When BTF info
disagrees with actual types that the verifiers sees the BPF trampoline has to
fallback to conservative and treat all arguments as u64. The FENTRY/FEXIT
program can still attach to such subprograms, but it won't be able to recognize
pointer types like 'struct sk_buff *' and it won't be able to pass them to
bpf_skb_output() for dumping packets to user space. The FENTRY/FEXIT program
would need to use bpf_probe_read_kernel() instead.
The BPF_PROG_LOAD command is extended with attach_prog_fd field. When it's set
to zero the attach_btf_id is one vmlinux BTF type ids. When attach_prog_fd
points to previously loaded BPF program the attach_btf_id is BTF type id of
main function or one of its subprograms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-18-ast@kernel.org
|
|
BPF trampoline can be made to work with existing 5 bytes of BPF program
prologue, but let's add 5 bytes of NOPs to the beginning of every JITed BPF
program to make BPF trampoline job easier. They can be removed in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-14-ast@kernel.org
|
|
Introduce BPF trampoline concept to allow kernel code to call into BPF programs
with practically zero overhead. The trampoline generation logic is
architecture dependent. It's converting native calling convention into BPF
calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The
registers R1 to R5 are used to pass arguments into BPF functions. The main BPF
program accepts only single argument "ctx" in R1. Whereas CPU native calling
convention is different. x86-64 is passing first 6 arguments in registers
and the rest on the stack. x86-32 is passing first 3 arguments in registers.
sparc64 is passing first 6 in registers. And so on.
The trampolines between BPF and kernel already exist. BPF_CALL_x macros in
include/linux/filter.h statically compile trampolines from BPF into kernel
helpers. They convert up to five u64 arguments into kernel C pointers and
integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On
32-bit architecture they're meaningful.
The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and
__bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert
kernel function arguments into array of u64s that BPF program consumes via
R1=ctx pointer.
This patch set is doing the same job as __bpf_trace_##call() static
trampolines, but dynamically for any kernel function. There are ~22k global
kernel functions that are attachable via nop at function entry. The function
arguments and types are described in BTF. The job of btf_distill_func_proto()
function is to extract useful information from BTF into "function model" that
architecture dependent trampoline generators will use to generate assembly code
to cast kernel function arguments into array of u64s. For example the kernel
function eth_type_trans has two pointers. They will be casted to u64 and stored
into stack of generated trampoline. The pointer to that stack space will be
passed into BPF program in R1. On x86-64 such generated trampoline will consume
16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will
make sure that only two u64 are accessed read-only by BPF program. The verifier
will also recognize the precise type of the pointers being accessed and will
not allow typecasting of the pointer to a different type within BPF program.
The tracing use case in the datacenter demonstrated that certain key kernel
functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always
active. Other functions have both kprobe and kretprobe. So it is essential to
keep both kernel code and BPF programs executing at maximum speed. Hence
generated BPF trampoline is re-generated every time new program is attached or
detached to maintain maximum performance.
To avoid the high cost of retpoline the attached BPF programs are called
directly. __bpf_prog_enter/exit() are used to support per-program execution
stats. In the future this logic will be optimized further by adding support
for bpf_stats_enabled_key inside generated assembly code. Introduction of
preemptible and sleepable BPF programs will completely remove the need to call
to __bpf_prog_enter/exit().
Detach of a BPF program from the trampoline should not fail. To avoid memory
allocation in detach path the half of the page is used as a reserve and flipped
after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly
which is enough for BPF tracing use cases. This limit can be increased in the
future.
BPF_TRACE_FENTRY programs have access to raw kernel function arguments while
BPF_TRACE_FEXIT programs have access to kernel return value as well. Often
kprobe BPF program remembers function arguments in a map while kretprobe
fetches arguments from a map and analyzes them together with return value.
BPF_TRACE_FEXIT accelerates this typical use case.
Recursion prevention for kprobe BPF programs is done via per-cpu
bpf_prog_active counter. In practice that turned out to be a mistake. It
caused programs to randomly skip execution. The tracing tools missed results
they were looking for. Hence BPF trampoline doesn't provide builtin recursion
prevention. It's a job of BPF program itself and will be addressed in the
follow up patches.
BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases
in the future. For example to remove retpoline cost from XDP programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org
|
|
Add bpf_arch_text_poke() helper that is used by BPF trampoline logic to patch
nops/calls in kernel text into calls into BPF trampoline and to patch
calls/nops inside BPF programs too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-4-ast@kernel.org
|
|
Refactor x86 JITing of LDX, STX, CALL instructions into separate helper
functions. No functional changes in LDX and STX helpers. There is a minor
change in CALL helper. It will populate target address correctly on the first
pass of JIT instead of second pass. That won't reduce total number of JIT
passes though.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-3-ast@kernel.org
|
|
Pointer to BTF object is a pointer to kernel object or NULL.
Such pointers can only be used by BPF_LDX instructions.
The verifier changed their opcode from LDX|MEM|size
to LDX|PROBE_MEM|size to make JITing easier.
The number of entries in extable is the number of BPF_LDX insns
that access kernel memory via "pointer to BTF type".
Only these load instructions can fault.
Since x86 extable is relative it has to be allocated in the same
memory region as JITed code.
Allocate it prior to last pass of JITing and let the last pass populate it.
Pointer to extable in bpf_prog_aux is necessary to make page fault
handling fast.
Page fault handling is done in two steps:
1. bpf_prog_kallsyms_find() finds BPF program that page faulted.
It's done by walking rb tree.
2. then extable for given bpf program is binary searched.
This process is similar to how page faulting is done for kernel modules.
The exception handler skips over faulting x86 instruction and
initializes destination register with zero. This mimics exact
behavior of bpf_probe_read (when probe_kernel_read faults dest is zeroed).
JITs for other architectures can add support in similar way.
Until then they will reject unknown opcode and fallback to interpreter.
Since extable should be aligned and placed near JITed code
make bpf_jit_binary_alloc() return 4 byte aligned image offset,
so that extable aligning formula in bpf_int_jit_compile() doesn't need
to rely on internal implementation of bpf_jit_binary_alloc().
On x86 gcc defaults to 16-byte alignment for regular kernel functions
due to better performance. JITed code may be aligned to 16 in the future,
but it will use 4 in the meantime.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-10-ast@kernel.org
|
|
Replace 'cmp reg, 0' with 'test reg, reg' for comparisons against
zero. Saves 1 byte of instruction encoding per occurrence. The flag
results of test 'reg, reg' are identical to 'cmp reg, 0' in all
cases except for AF which we don't use/care about. In terms of
macro-fusibility in combination with a subsequent conditional jump
instruction, both have the same properties for the jumps used in
the JIT translation. For example, same JITed Cilium program can
shrink a bit from e.g. 12,455 to 12,317 bytes as tests with 0 are
used quite frequently.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
|
|
Introduction of bounded loops exposed old bug in x64 JIT.
JIT maintains the array of offsets to the end of all instructions to
compute jmp offsets.
addrs[0] - offset of the end of the 1st insn (that includes prologue).
addrs[1] - offset of the end of the 2nd insn.
JIT didn't keep the offset of the beginning of the 1st insn,
since classic BPF didn't have backward jumps and valid extended BPF
couldn't have a branch to 1st insn, because it didn't allow loops.
With bounded loops it's possible to construct a valid program that
jumps backwards to the 1st insn.
Fix JIT by computing:
addrs[0] - offset of the end of prologue == start of the 1st insn.
addrs[1] - offset of the end of 1st insn.
v1->v2:
- Yonghong noticed a bug in jit linfo.
Fix it by passing 'addrs + 1' to bpf_prog_fill_jited_linfo(),
since it expects insn_to_jit_off array to be offsets to last byte.
Reported-by: syzbot+35101610ff3e83119b1b@syzkaller.appspotmail.com
Fixes: 2589726d12a1 ("bpf: introduce bounded loops")
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
|
|
Two cases of overlapping changes, nothing fancy.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-07-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH
on BE architectures, from Jiong.
2) Fix several bugs in the x32 BPF JIT for handling shifts by 0,
from Luke and Xi.
3) Fix NULL pointer deref in btf_type_is_resolve_source_only(),
from Stanislav.
4) Properly handle the check that forwarding is enabled on the device
in bpf_ipv6_fib_lookup() helper code, from Anton.
5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit
alignment such as m68k, from Baruch.
6) Fix kernel hanging in unregister_netdevice loop while unregistering
device bound to XDP socket, from Ilya.
7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan.
8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri.
9) Fix bpftool to use correct argument in cgroup errors, from Jakub.
10) Fix detaching dummy prog in XDP redirect sample code, from Prashant.
11) Add Jonathan to AF_XDP reviewers, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current x32 BPF JIT does not correctly compile shift operations when
the immediate shift amount is 0. The expected behavior is for this to
be a no-op.
The following program demonstrates the bug. The expexceted result is 1,
but the current JITed code returns 2.
r0 = 1
r1 = 1
r1 <<= 0
if r1 == 1 goto end
r0 = 2
end:
exit
This patch simplifies the code and fixes the bug.
Fixes: 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The current x32 BPF JIT for shift operations is not correct when the
shift amount in a register is 0. The expected behavior is a no-op, whereas
the current implementation changes bits in the destination register.
The following example demonstrates the bug. The expected result of this
program is 1, but the current JITed code returns 2.
r0 = 1
r1 = 1
r2 = 0
r1 <<= r2
if r1 == 1 goto end
r0 = 2
end:
exit
The bug is caused by an incorrect assumption by the JIT that a shift by
32 clear the register. On x32 however, shifts use the lower 5 bits of
the source, making a shift by 32 equivalent to a shift by 0.
This patch fixes the bug using double-precision shifts, which also
simplifies the code.
Fixes: 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Honestly all the conflicts were simple overlapping changes,
nothing really interesting to report.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
|
|
Since commit 177366bf7ceb the %rbp stopped pointing to %rbp of the
previous stack frame. That broke frame pointer based stack unwinding.
This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier
enforces MAX_BPF_STACK stack size for programs with tail calls.
Fixes: 177366bf7ceb ("bpf: change x86 JITed program stack layout")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cc: Wang YanQing <udknight@gmail.com>
Tested-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation has two errors:
1: The second xor instruction will clear carry flag which
is necessary for following sbb instruction.
2: The select coding for sbb instruction is wrong, the coding
is "sbb dreg_hi,ecx", but what we need is "sbb ecx,dreg_hi".
This patch rewrites the implementation and fixes the errors.
This patch fixes below errors reported by bpf/test_verifier in x32
platform when the jit is enabled:
"
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
......
Summary: 1189 PASSED, 125 SKIPPED, 15 FAILED
"
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The current method to compare 64-bit numbers for conditional jump is:
1) Compare the high 32-bit first.
2) If the high 32-bit isn't the same, then goto step 4.
3) Compare the low 32-bit.
4) Check the desired condition.
This method is right for unsigned comparison, but it is buggy for signed
comparison, because it does signed comparison for low 32-bit too.
There is only one sign bit in 64-bit number, that is the MSB in the 64-bit
number, it is wrong to treat low 32-bit as signed number and do the signed
comparison for it.
This patch fixes the bug and adds a testcase in selftests/bpf for such bug.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch implements code-gen for new JMP32 instructions on x32.
Also fixed several reverse xmas tree coding style issues as I am there.
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch implements code-gen for new JMP32 instructions on x86_64.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds bpf_line_info support.
It accepts an array of bpf_line_info objects during BPF_PROG_LOAD.
The "line_info", "line_info_cnt" and "line_info_rec_size" are added
to the "union bpf_attr". The "line_info_rec_size" makes
bpf_line_info extensible in the future.
The new "check_btf_line()" ensures the userspace line_info is valid
for the kernel to use.
When the verifier is translating/patching the bpf_prog (through
"bpf_patch_insn_single()"), the line_infos' insn_off is also
adjusted by the newly added "bpf_adj_linfo()".
If the bpf_prog is jited, this patch also provides the jited addrs (in
aux->jited_linfo) for the corresponding line_info.insn_off.
"bpf_prog_fill_jited_linfo()" is added to fill the aux->jited_linfo.
It is currently called by the x86 jit. Other jits can also use
"bpf_prog_fill_jited_linfo()" and it will be done in the followup patches.
In the future, if it deemed necessary, a particular jit could also provide
its own "bpf_prog_fill_jited_linfo()" implementation.
A few "*line_info*" fields are added to the bpf_prog_info such
that the user can get the xlated line_info back (i.e. the line_info
with its insn_off reflecting the translated prog). The jited_line_info
is available if the prog is jited. It is an array of __u64.
If the prog is not jited, jited_line_info_cnt is 0.
The verifier's verbose log with line_info will be done in
a follow up patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 24dea04767e6 ("bpf, x32: remove ld_abs/ld_ind")
removed the 4 /* Extra space for skb_copy_bits buffer */
from _STACK_SIZE, but it didn't fix the concerned code
in emit_prologue and emit_epilogue, and this error will
bring very strange kernel runtime errors. This patch
fixes it.
Fixes: 24dea04767e6 ("bpf, x32: remove ld_abs/ld_ind")
Reported-by: Meelis Roos <mroos@linux.ee>
Bisected-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from x32 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from x64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF
only. Classic BPF is supported because of the conversion by BPF core.
Almost all instructions from eBPF ISA supported except the following:
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment.
IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use
EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF
ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others
eBPF registers, R0-R10, are simulated through scratch space on stack.
The reasons behind the hardware registers allocation policy are:
1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit
for general eBPF 64bit register simulation.
2:We need at least 4 registers to simulate most eBPF ISA operations
on registers operands instead of on register&memory operands.
3:We need to put BPF_REG_AX on hardware registers, or constant blinding
will degrade jit performance heavily.
Tested on PC (Intel(R) Core(TM) i5-5200U CPU).
Testing results on i5-5200U:
1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed]
2) test_progs: Summary: 83 PASSED, 0 FAILED.
3) test_lpm: OK
4) test_lru_map: OK
5) test_verifier: Summary: 828 PASSED, 0 FAILED.
Above tests are all done in following two conditions separately:
1:bpf_jit_enable=1 and bpf_jit_harden=0
2:bpf_jit_enable=1 and bpf_jit_harden=2
Below are some numbers for this jit implementation:
Note:
I run test_progs in kselftest 100 times continuously for every condition,
the numbers are in format: total/times=avg.
The numbers that test_bpf reports show almost the same relation.
a:jit_enable=0 and jit_harden=0 b:jit_enable=1 and jit_harden=0
test_pkt_access:PASS:ipv4:15622/100=156 test_pkt_access:PASS:ipv4:10674/100=106
test_pkt_access:PASS:ipv6:9130/100=91 test_pkt_access:PASS:ipv6:4855/100=48
test_xdp:PASS:ipv4:240198/100=2401 test_xdp:PASS:ipv4:138912/100=1389
test_xdp:PASS:ipv6:137326/100=1373 test_xdp:PASS:ipv6:68542/100=685
test_l4lb:PASS:ipv4:61100/100=611 test_l4lb:PASS:ipv4:37302/100=373
test_l4lb:PASS:ipv6:101000/100=1010 test_l4lb:PASS:ipv6:55030/100=550
c:jit_enable=1 and jit_harden=2
test_pkt_access:PASS:ipv4:10558/100=105
test_pkt_access:PASS:ipv6:5092/100=50
test_xdp:PASS:ipv4:131902/100=1319
test_xdp:PASS:ipv6:77932/100=779
test_l4lb:PASS:ipv4:38924/100=389
test_l4lb:PASS:ipv6:57520/100=575
The numbers show we get 30%~50% improvement.
See Documentation/networking/filter.txt for more information.
Changelog:
Changes v5-v6:
1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for
consistence reason.
2:Clean up non-standard comments, reported by Daniel Borkmann.
3:Fix a memory leak issue, repoted by Daniel Borkmann.
Changes v4-v5:
1:Delete is_on_stack, BPF_REG_AX is the only one
on real hardware registers, so just check with
it.
2:Apply commit 1612a981b766 ("bpf, x64: fix JIT emission
for dead code"), suggested by Daniel Borkmann.
Changes v3-v4:
1:Fix changelog in commit.
I install llvm-6.0, then test_progs willn't report errors.
I submit another patch:
"bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform"
to fix another problem, after that patch, test_verifier willn't report errors too.
2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation.
Changes v2-v3:
1:Move BPF_REG_AX to real hardware registers for performance reason.
3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann.
4:Delete partial codes in 1c2a088a6626, suggested by Daniel Borkmann.
5:Some bug fixes and comments improvement.
Changes v1-v2:
1:Fix bug in emit_ia32_neg64.
2:Fix bug in emit_ia32_arsh_r64.
3:Delete filename in top level comment, suggested by Thomas Gleixner.
4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner.
5:Rewrite some words in changelog.
6:CodingSytle improvement and a little more comments.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The JIT logic in jit_subprogs() is as follows: for all subprogs we
allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here),
and pass it to bpf_int_jit_compile(). If a failure occurred during
JIT and prog->jited is not set, then we bail out from attempting to
JIT the whole program, and punt to the interpreter instead. In case
JITing went successful, we fixup BPF call offsets and do another
pass to bpf_int_jit_compile() (extra_pass is true at that point) to
complete JITing calls. Given that requires to pass JIT context around
addrs and jit_data from x86 JIT are freed in the extra_pass in
bpf_int_jit_compile() when calls are involved (if not, they can
be freed immediately). However, if in the original pass, the JIT
image didn't converge then we leak addrs and jit_data since image
itself is NULL, the prog->is_func is set and extra_pass is false
in that case, meaning both will become unreachable and are never
cleaned up, therefore we need to free as well on !image. Only x64
JIT is affected.
Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
While reviewing x64 JIT code, I noticed that we leak the prior allocated
JIT image in the case where proglen != oldproglen during the JIT passes.
Prior to the commit e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT
compiler") we would just break out of the loop, and using the image as the
JITed prog since it could only shrink in size anyway. After e0ee9c12157d,
we would bail out to out_addrs label where we free addrs and jit_data but
not the image coming from bpf_jit_binary_alloc().
Fixes: e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
So by chance I looked into x86 assembly in arch/x86/net/bpf_jit_comp.c and
noticed the weird and inconsistent comment style it mistakenly learned from
the networking code:
/* Multi-line comment ...
* ... looks like this.
*/
Fix this to use the standard comment style specified in Documentation/CodingStyle
and used in arch/x86/ as well:
/*
* Multi-line comment ...
* ... looks like this.
*/
Also, to quote Linus's ... more explicit views about this:
http://article.gmane.org/gmane.linux.kernel.cryptoapi/21066
> But no, the networking code picked *none* of the above sane formats.
> Instead, it picked these two models that are just half-arsed
> shit-for-brains:
>
> (no)
> /* This is disgusting drug-induced
> * crap, and should die
> */
>
> (no-no-no)
> /* This is also very nasty
> * and visually unbalanced */
>
> Please. The networking code actually has the *worst* possible comment
> style. You can literally find that (no-no-no) style, which is just
> really horribly disgusting and worse than the otherwise fairly similar
> (d) in pretty much every way.
Also improve the comments and some other details while at it:
- Don't mix same-line and previous-line comment style on otherwise
identical code patterns within the same function,
- capitalize 'BPF' and x86 register names consistently,
- capitalize sentences consistently,
- instead of 'x64' use 'x86-64': x64 is a Microsoft specific term,
- use more consistent punctuation,
- use standard coding style in macros as well,
- fix typos and a few other minor details.
Consistent coding style is not optional, at least in arch/x86/.
No change in functionality.
( In case this commit causes conflicts with pending development code
I'll be glad to help resolve any conflicts! )
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 2a5418a13fcf ("bpf: improve dead code sanitizing") replaced dead
code with a series of ja-1 instructions, for safety. That made JIT
compilation much more complex for some BPF programs. One instance of such
programs is, for example:
bool flag = false
...
/* A bunch of other code */
...
if (flag)
do_something()
In some cases llvm is not able to remove at compile time the code for
do_something(), so the generated BPF program ends up with a large amount
of dead instructions. In one specific real life example, there are two
series of ~500 and ~1000 dead instructions in the program. When the
verifier replaces them with a series of ja-1 instructions, it causes an
interesting behavior at JIT time.
During the first pass, since all the instructions are estimated at 64
bytes, the ja-1 instructions end up being translated as 5 bytes JMP
instructions (0xE9), since the jump offsets become increasingly large (>
127) as each instruction gets discovered to be 5 bytes instead of the
estimated 64.
Starting from the second pass, the first N instructions of the ja-1
sequence get translated into 2 bytes JMPs (0xEB) because the jump offsets
become <= 127 this time. In particular, N is defined as roughly 127 / (5
- 2) ~= 42. So, each further pass will make the subsequent N JMP
instructions shrink from 5 to 2 bytes, making the image shrink every time.
This means that in order to have the entire program converge, there need
to be, in the real example above, at least ~1000 / 42 ~= 24 passes just
for translating the dead code. If we add this number to the passes needed
to translate the other non dead code, it brings such program to 40+
passes, and JIT doesn't complete. Ultimately the userspace loader fails
because such BPF program was supposed to be part of a prog array owner
being JITed.
While it is certainly possible to try to refactor such programs to help
the compiler remove dead code, the behavior is not really intuitive and it
puts further burden on the BPF developer who is not expecting such
behavior. To make things worse, such programs are working just fine in all
the kernel releases prior to the ja-1 fix.
A possible approach to mitigate this behavior consists into noticing that
for ja-1 instructions we don't really need to rely on the estimated size
of the previous and current instructions, we know that a -1 BPF jump
offset can be safely translated into a 0xEB instruction with a jump offset
of -2.
Such fix brings the BPF program in the previous example to complete again
in ~9 passes.
Fixes: 2a5418a13fcf ("bpf: improve dead code sanitizing")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
