summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2009-02-09Merge branch 'x86/paravirt' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-voyager/voyager_smp.c
2009-02-09x86: unify do_IRQ()Jeremy Fitzhardinge
With the differences in interrupt handling hoisted into handle_irq(), do_IRQ is more or less identical between 32 and 64 bit, so unify it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: add handle_irq() to allow interrupt injectionJeremy Fitzhardinge
Xen uses a different interrupt path, so introduce handle_irq() to allow interrupts to be inserted into the normal interrupt path. This is handled slightly differently on 32 and 64-bit. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: check_timer cleanupYinghai Lu
Impact: make check-timer more robust potentially solve boot fragility For edge trigger io-apic routing, we already unmasked the pin via setup_IO_APIC_irq(), so don't unmask it again. Also call local_irq_disable() between timer_irq_works(), because it calls local_irq_enable() inside. Also remove not needed apic version reading for 64-bit Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: use NR_IRQS_LEGACY to replace 16Yinghai Lu
Impact: cleanup also could kill platform_legacy_irq Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86/irq: optimize nr_irqsYinghai Lu
Impact: make nr_irqs depend more on cards used in a system depend on nr_irq_gsi more, and have a ratio for MSI. v2: make nr_irqs less than NR_VECTORS * nr_cpu_ids aka if only one cpu, we only can support nr_irqs = NR_VECTORS Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05x86, numaq: cleanupsIngo Molnar
Also move xquad_portio over to where it's allocated. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05Merge branch 'x86/urgent' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-default/setup.c Semantic merge: arch/x86/kernel/irqinit_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05x86: move default_ipi_xx back to ipi.cYinghai Lu
Impact: cleanup only leave _default_ipi_xx etc in .h Beyond the cleanup factor, this saves a bit of code size as well: text data bss dec hex filename 7281931 1630144 1463304 10375379 9e50d3 vmlinux.before 7281753 1630144 1463304 10375201 9e5021 vmlinux.after Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05x86, apic: explain the purpose of max_physical_apicidIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05smp, generic: introduce arch_disable_smp_support() instead of ↵Ingo Molnar
disable_ioapic_setup() Impact: cleanup disable_ioapic_setup() in init/main.c is ugly as the function is x86-specific. The #ifdef inline prototype there is ugly too. Replace it with a generic arch_disable_smp_support() function - which has a weak alias for non-x86 architectures and for non-ioapic x86 builds. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04Merge branch 'core/percpu' into x86/paravirtH. Peter Anvin
2009-02-05x86: fix grammar in user-visible BIOS warningAlex Chiang
Fix user-visible grammo. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04x86, 64-bit: print DMI info in the oops traceKyle McMartin
This patch echoes what we already do on 32-bit since 90f7d25c6b672137344f447a30a9159945ffea72, and prints the DMI product name in show_regs, so that system specific problems can be easily identified. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04Merge branch 'core/xen' into x86/urgentIngo Molnar
2009-02-03x86: APIC: enable workaround on AMD Fam10h CPUsBorislav Petkov
Impact: fix to enable APIC for AMD Fam10h on chipsets with a missing/b0rked ACPI MP table (MADT) Booting a 32bit kernel on an AMD Fam10h CPU running on chipsets with missing/b0rked MP table leads to a hang pretty early in the boot process due to the APIC not being initialized. Fix that by falling back to the default APIC base address in 32bit code, as it is done in the 64bit codepath. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-02x86: push old stack address on irqstack for unwinderMartin Hicks
Impact: Fixes dumpstack and KDB on 64 bits This re-adds the old stack pointer to the top of the irqstack to help with unwinding. It was removed in commit d99015b1abbad743aa049b439c1e1dede6d0fa49 as part of the save_args out-of-line work. Both dumpstack and KDB require this information. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-03x86, percpu: fix kexec with vmlinuxYinghai Lu
Impact: fix regression with kexec with vmlinux Split data.init into data.init, percpu, data.init2 sections instead of let data.init wrap percpu secion. Thus kexec loading will be happy, because sections will not overlap. Before the patch we have: Elf file type is EXEC (Executable file) Entry point 0x200000 There are 6 program headers, starting at offset 64 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000200000 0xffffffff80200000 0x0000000000200000 0x0000000000ca6000 0x0000000000ca6000 R E 200000 LOAD 0x0000000000ea6000 0xffffffff80ea6000 0x0000000000ea6000 0x000000000014dfe0 0x000000000014dfe0 RWE 200000 LOAD 0x0000000001000000 0xffffffffff600000 0x0000000000ff4000 0x0000000000000888 0x0000000000000888 RWE 200000 LOAD 0x00000000011f6000 0xffffffff80ff6000 0x0000000000ff6000 0x0000000000073086 0x0000000000a2d938 RWE 200000 LOAD 0x0000000001400000 0x0000000000000000 0x000000000106a000 0x00000000001d2ce0 0x00000000001d2ce0 RWE 200000 NOTE 0x00000000009e2c1c 0xffffffff809e2c1c 0x00000000009e2c1c 0x0000000000000024 0x0000000000000024 4 Section to Segment mapping: Segment Sections... 00 .text .notes __ex_table .rodata __bug_table .pci_fixup .builtin_fw __ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param 01 .data .init.rodata .data.cacheline_aligned .data.read_mostly 02 .vsyscall_0 .vsyscall_fn .vsyscall_gtod_data .vsyscall_1 .vsyscall_2 .vgetcpu_mode .jiffies 03 .data.init_task .smp_locks .init.text .init.data .init.setup .initcall.init .con_initcall.init .x86_cpu_dev.init .altinstructions .altinstr_replacement .exit.text .init.ramfs .bss 04 .data.percpu 05 .notes After patch we've got: Elf file type is EXEC (Executable file) Entry point 0x200000 There are 7 program headers, starting at offset 64 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000200000 0xffffffff80200000 0x0000000000200000 0x0000000000ca6000 0x0000000000ca6000 R E 200000 LOAD 0x0000000000ea6000 0xffffffff80ea6000 0x0000000000ea6000 0x000000000014dfe0 0x000000000014dfe0 RWE 200000 LOAD 0x0000000001000000 0xffffffffff600000 0x0000000000ff4000 0x0000000000000888 0x0000000000000888 RWE 200000 LOAD 0x00000000011f6000 0xffffffff80ff6000 0x0000000000ff6000 0x0000000000073086 0x0000000000073086 RWE 200000 LOAD 0x0000000001400000 0x0000000000000000 0x000000000106a000 0x00000000001d2ce0 0x00000000001d2ce0 RWE 200000 LOAD 0x000000000163d000 0xffffffff8123d000 0x000000000123d000 0x0000000000000000 0x00000000007e6938 RWE 200000 NOTE 0x00000000009e2c1c 0xffffffff809e2c1c 0x00000000009e2c1c 0x0000000000000024 0x0000000000000024 4 Section to Segment mapping: Segment Sections... 00 .text .notes __ex_table .rodata __bug_table .pci_fixup .builtin_fw __ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param 01 .data .init.rodata .data.cacheline_aligned .data.read_mostly 02 .vsyscall_0 .vsyscall_fn .vsyscall_gtod_data .vsyscall_1 .vsyscall_2 .vgetcpu_mode .jiffies 03 .data.init_task .smp_locks .init.text .init.data .init.setup .initcall.init .con_initcall.init .x86_cpu_dev.init .altinstructions .altinstr_replacement .exit.text .init.ramfs 04 .data.percpu 05 .bss 06 .notes Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-02x86/vmi: fix interrupt enable/disable/save/restore calling convention.Jeremy Fitzhardinge
Zach says: > Enable/Disable have no clobbers at all. > Save clobbers only return value, %eax > Restore also clobbers nothing. This is precisely compatible with the calling convention, so we can just call them directly without wrapping. (Compile tested only.) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-01irq, x86: fix lock status with numa_migrate_irq_descYinghai Lu
Eric Paris reported: > I have an hp dl785g5 which is unable to successfully run > 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126. During bootup > (early in userspace daemons starting) I get the below BUG, which quickly > renders the machine dead. I assume it is because sparse_irq_lock never > gets released when the BUG kills that task. Adjust lock sequence when migrating a descriptor with CONFIG_NUMA_MIGRATE_IRQ_DESC enabled. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01x86: add cache descriptors for Intel Core i7Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ds, bts: cleanup/fix DS configuration ring-buffer: reset timestamps when ring buffer is reset trace: set max latency variable to zero on default trace: stop all recording to ring buffer on ftrace_dump trace: print ftrace_dump at KERN_EMERG log level ring_buffer: reset write when reserve buffer fail tracing/function-graph-tracer: fix a regression while suspend to disk ring-buffer: fix alignment problem
2009-01-31Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 setup: fix asm constraints in vesa_store_edid xen: make sysfs files behave as their names suggest x86: tone down mtrr_trim_uncached_memory() warning x86: correct the CPUID pattern for MSR_IA32_MISC_ENABLE availability
2009-01-31x86/Voyager: make it build and bootJames Bottomley
[ mingo@elte.hu: these fixes are a subset of changes cherry-picked from: git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6.git They fix various problems that recent x86 changes caused in the Voyager subarchitecture: both APIC changes and cpumask changes and certain cleanups caused subarch assumptions to break. Most of these changes are obsolete as the subarch code has been removed from the x86 development tree - but we merge them upstream to make Voyager build and boot. ] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86: split loading percpu segments from loading gdtJeremy Fitzhardinge
Impact: split out a function, no functional change Xen needs to be able to access percpu data from very early on. For various reasons, it cannot also load the gdt at that time. It does, however, have a pefectly functional gdt at that point, so there's no pressing need to reload the gdt. Split the function to load the segment registers off, so Xen can call it directly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31x86: pass in cpu number to switch_to_new_gdt()Brian Gerst
Impact: cleanup, prepare for xen boot fix. Xen needs to call this function very early to setup the GDT and per-cpu segments. Remove the call to smp_processor_id() and just pass in the cpu number. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31x86: UV fix uv_flush_send_and_wait()Cliff Wickman
Impact: fix possible tlb mis-flushing on UV uv_flush_send_and_wait() should return a pointer if the broadcast remote tlb shootdown requests fail. That causes the conventional IPI method of shootdown to be used. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31x86, apic: clean up spurious vector sanity checkIngo Molnar
Move the spurious vector sanity check to the place where it's defined - out of a .c file. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86: update copyrightsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86, apic: clean up header sectionIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86/paravirt: use callee-saved convention for pte_val/make_pte/etcJeremy Fitzhardinge
Impact: Optimization In the native case, pte_val, make_pte, etc are all just identity functions, so there's no need to clobber a lot of registers over them. (This changes the 32-bit callee-save calling convention to return both EAX and EDX so functions can return 64-bit values.) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30x86/paravirt: add register-saving thunks to reduce caller register pressureJeremy Fitzhardinge
Impact: Optimization One of the problems with inserting a pile of C calls where previously there were none is that the register pressure is greatly increased. The C calling convention says that the caller must expect a certain set of registers may be trashed by the callee, and that the callee can use those registers without restriction. This includes the function argument registers, and several others. This patch seeks to alleviate this pressure by introducing wrapper thunks that will do the register saving/restoring, so that the callsite doesn't need to worry about it, but the callee function can be conventional compiler-generated code. In many cases (particularly performance-sensitive cases) the callee will be in assembler anyway, and need not use the compiler's calling convention. Standard calling convention is: arguments return scratch x86-32 eax edx ecx eax ? x86-64 rdi rsi rdx rcx rax r8 r9 r10 r11 The thunk preserves all argument and scratch registers. The return register is not preserved, and is available as a scratch register for unwrapped callee code (and of course the return value). Wrapped function pointers are themselves wrapped in a struct paravirt_callee_save structure, in order to get some warning from the compiler when functions with mismatched calling conventions are used. The most common paravirt ops, both statically and dynamically, are interrupt enable/disable/save/restore, so handle them first. This is particularly easy since their calls are handled specially anyway. XXX Deal with VMI. What's their calling convention? Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30x86: fix paravirt clobber in entry_64.SJeremy Fitzhardinge
Impact: Fix latent bug The clobber is trying to say that anything except RDI is available for clobbering, but actually clobbers everything. This hasn't mattered because the clobbers were basically ignored, but subsequent patches will rely on them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30x86/pvops: add a paravirt_ident functions to allow special patchingJeremy Fitzhardinge
Impact: Optimization Several paravirt ops implementations simply return their arguments, the most obvious being the make_pte/pte_val class of operations on native. On 32-bit, the identity function is literally a no-op, as the calling convention uses the same registers for the first argument and return. On 64-bit, it can be implemented with a single "mov". This patch adds special identity functions for 32 and 64 bit argument, and machinery to recognize them and replace them with either nops or a mov as appropriate. At the moment, the only users for the identity functions are the pagetable entry conversion functions. The result is a measureable improvement on pagetable-heavy benchmarks (2-3%, reducing the pvops overhead from 5 to 2%). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30Merge branch 'core/percpu' into x86/paravirtH. Peter Anvin
2009-01-30x86, apic, 32-bit: add self-IPI methodsIngo Molnar
Impact: fix rare crash on 32-bit The 32-bit APIC drivers had their send_IPI_self vectors set to NULL, but ioapic_retrigger_irq() depends on it being always set. Fix it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30Merge branch 'linus' into core/percpuIngo Molnar
Conflicts: kernel/irq/handle.c
2009-01-30x86: don't treat bigsmp as non-standardYinghai Lu
just like 64 bit switch from flat logical APIC messages to flat physical mode automatically. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: seperate default_send_IPI_mask_sequence/allbutself from logicalYinghai Lu
Impact: 32-bit should use logical version there are two version: for default_send_IPI_mask_sequence/allbutself one in ipi.h and one in ipi.c for 32bit it seems .h version overwrote ipi.c for a while. restore it so 32 bit could use its old logical version. also remove dupicated functions in .c Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: fix compiling with 64bit with def_to_bigsmpYinghai Lu
only need to do cut off with 32bit Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29Documentation: move DMA-mapping.txt to Doc/PCI/Randy Dunlap
Move DMA-mapping.txt to Documentation/PCI/. DMA-mapping.txt was supposed to be moved from Documentation/ to Documentation/PCI/. The 00-INDEX files in those two directories were updated, along with a few other text files, but the file itself somehow escaped being moved, so move it and update more text files and source files with its new location. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-30x86: allow more than 8 cpus to be used on 32-bitYinghai Lu
X86_PC is the only remaining 'sub' architecture, so we dont need it anymore. This also cleans up a few spurious references to X86_PC in the driver space - those certainly should be X86. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: unify genapic code, unify subarchitectures, remove old subarchitecture ↵Suresh Siddha
code, xapic fix xapic fix for 32bit platform with less than 8 cpu's. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: rename X86_GENERICARCH to X86_32_NON_STANDARDIngo Molnar
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures that are not included in the default build. Rename it to X86_32_NON_STANDARD. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86/Voyager: remove X86_FIND_SMP_CONFIG Kconfig quirkIngo Molnar
x86/Voyager had this Kconfig quirk: config X86_FIND_SMP_CONFIG def_bool y depends on X86_MPPARSE || X86_VOYAGER Which splits off the find_smp_config() callback into a build-time quirk. Voyager should use the existing x86_quirks.mach_find_smp_config() callback to introduce SMP-config quirks. NUMAQ-32 and VISWS already use this. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86/Voyager: remove X86_BIOS_REBOOT Kconfig quirkIngo Molnar
Voyager has this Kconfig quirk: config X86_BIOS_REBOOT bool depends on !X86_VOYAGER default y Voyager should use the existing machine_ops.emergency_restart reboot quirk mechanism instead of a build-time quirk. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: generalize boot_cpu_idIngo Molnar
x86/Voyager can boot on non-zero processors. While that can probably be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id for now for easier transition - and expand it to all of x86. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: replace CONFIG_X86_SMP with CONFIG_SMPIngo Molnar
The x86/Voyager subarch used to have this distinction between 'x86 SMP support' and 'Voyager SMP support': config X86_SMP bool depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) This is a pointless distinction - Voyager can (and already does) use smp_ops to implement various SMP quirks it has - and it can be extended more to cover all the specialities of Voyager. So remove this complication in the Kconfig space. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: remove subarchitecture supportIngo Molnar
Remove the 32-bit subarchitecture support code. All subarchitectures but Voyager have been converted. Voyager will be done later or will be removed. Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-17 14:19:18 +0000