summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2013-11-12Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu changes from Ingo Molnar: "The biggest change that stands out is the increase of the CONFIG_NR_CPUS range from 4096 to 8192 - as real hardware out there already went beyond 4k CPUs ... We only allow more than 512 CPUs if offstack cpumasks are enabled. CONFIG_MAXSMP=y remains to be the 'you are nuts!' extreme testcase, which now means a max of 8192 CPUs" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Increase max CPU count to 8192 x86/cpu: Allow higher NR_CPUS values x86/cpu: Always print SMP information in /proc/cpuinfo x86/cpu: Track legacy CPU model data only on 32-bit kernels
2013-11-12Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Two small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, msr: Use file_inode(), not f_mapping->host x86: mkpiggy.c: Explicitly close the output file
2013-11-12Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two changes that prettify and compactify the SMP bootup output from: smpboot: Booting Node 0, Processors #1 #2 #3 OK smpboot: Booting Node 1, Processors #4 #5 #6 #7 OK smpboot: Booting Node 2, Processors #8 #9 #10 #11 OK smpboot: Booting Node 3, Processors #12 #13 #14 #15 OK Brought up 16 CPUs to something like: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 .... node #1, CPUs: #4 #5 #6 #7 .... node #2, CPUs: #8 #9 #10 #11 .... node #3, CPUs: #12 #13 #14 #15 x86: Booted up 4 nodes, 16 CPUs" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Further compress CPUs bootup message x86: Improve the printout of the SMP bootup CPU table
2013-11-12Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic fix from Ingo Molnar: "A single fix to the IO-APIC / local-APIC shutdown sequence" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Disable I/O APIC before shutdown of the local APIC
2013-11-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes in this cycle were: - Updated full dynticks support. - Event stream support for architected (ARM) timers. - ARM clocksource driver updates. - Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. - Misc fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC clocksource: sun4i: remove IRQF_DISABLED clocksource: sun4i: Report the minimum tick that we can program clocksource: sun4i: Select CLKSRC_MMIO clocksource: Provide timekeeping for efm32 SoCs clocksource: em_sti: convert to clk_prepare/unprepare time: Fix signedness bug in sysfs_get_uname() and its callers timekeeping: Fix some trivial typos in comments alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist clocksource: arch_timer: Do not register arch_sys_counter twice timer stats: Add a 'Collection: active/inactive' line to timer usage statistics sched_clock: Remove sched_clock_func() hook arch_timer: Move to generic sched_clock framework clocksource: tcb_clksrc: Remove IRQF_DISABLED clocksource: tcb_clksrc: Improve driver robustness clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare clocksource: arm_arch_timer: Use clocksource for suspend timekeeping clocksource: dw_apb_timer_of: Mark a few more functions as __init clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally arm: zynq: Enable arm_global_timer ...
2013-11-12Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this cycle are: - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik van Riel, Peter Zijlstra et al. Yay! - optimize preemption counter handling: merge the NEED_RESCHED flag into the preempt_count variable, by Peter Zijlstra. - wait.h fixes and code reorganization from Peter Zijlstra - cfs_bandwidth fixes from Ben Segall - SMP load-balancer cleanups from Peter Zijstra - idle balancer improvements from Jason Low - other fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED stop_machine: Fix race between stop_two_cpus() and stop_cpus() sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus sched: Fix asymmetric scheduling for POWER7 sched: Move completion code from core.c to completion.c sched: Move wait code from core.c to wait.c sched: Move wait.c into kernel/sched/ sched/wait: Fix __wait_event_interruptible_lock_irq_timeout() sched: Avoid throttle_cfs_rq() racing with period_timer stopping sched: Guarantee new group-entities always have weight sched: Fix hrtimer_cancel()/rq->lock deadlock sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining sched: Fix race on toggling cfs_bandwidth_used sched: Remove extra put_online_cpus() inside sched_setaffinity() sched/rt: Fix task_tick_rt() comment sched/wait: Fix build breakage sched/wait: Introduce prepare_to_wait_event() sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too sched: Remove get_online_cpus() usage sched: Fix race in migrate_swap_stop() ...
2013-11-12Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "As a first remark I'd like to note that the way to build perf tooling has been simplified and sped up, in the future it should be enough for you to build perf via: cd tools/perf/ make install (ie without the -j option.) The build system will figure out the number of CPUs and will do a parallel build+install. The various build system inefficiencies and breakages Linus reported against the v3.12 pull request should now be resolved - please (re-)report any remaining annoyances or bugs. Main changes on the perf kernel side: * Performance optimizations: . perf ring-buffer code optimizations, by Peter Zijlstra . perf ring-buffer code optimizations, by Oleg Nesterov . x86 NMI call-stack processing optimizations, by Peter Zijlstra . perf context-switch optimizations, by Peter Zijlstra . perf sampling speedups, by Peter Zijlstra . x86 Intel PEBS processing speedups, by Peter Zijlstra * Enhanced hardware support: . for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan . for Haswell transactions, by Andi Kleen, Peter Zijlstra * Core perf events code enhancements and fixes by Oleg Nesterov: . for uprobes, if fork() is called with pending ret-probes . for uprobes platform support code * New ABI details by Andi Kleen: . Report x86 Haswell TSX transaction abort cost as weight Main changes on the perf tooling side (some of these tooling changes utilize the above kernel side changes): * 'perf report/top' enhancements: . Convert callchain children list to rbtree, greatly reducing the time taken for callchain processing, from Namhyung Kim. . Add new COMM infrastructure, further improving histogram processing, from Frédéric Weisbecker, one fix from Namhyung Kim. . Add /proc/kcore based live-annotation improvements, including build-id cache support, multi map 'call' instruction navigation fixes, kcore address validation, objdump workarounds. From Adrian Hunter. . Show progress on histogram collapsing, that can take a long time, from Namhyung Kim. . Add --max-stack option to limit callchain stack scan in 'top' and 'report', improving callchain processing when reducing the stack depth is an option, from Waiman Long. . Add new option --ignore-vmlinux for perf top, from Willy Tarreau. * 'perf trace' enhancements: . 'perf trace' now can can use a 'perf probe' dynamic tracepoints to hook into the userspace -> kernel pathname copy so that it can map fds to pathnames without reading /proc/pid/fd/ symlinks. From Arnaldo Carvalho de Melo. . Show VFS path associated with fd in live sessions, using a 'vfs_getname' 'perf probe' created dynamic tracepoint or by looking at /proc/pid/fd, from Arnaldo Carvalho de Melo. . Add 'trace' beautifiers for lots of syscall arguments, from Arnaldo Carvalho de Melo. . Implement more compact 'trace' output by suppressing zeroed args, from Arnaldo Carvalho de Melo. . Show thread COMM by default in 'trace', from Arnaldo Carvalho de Melo. . Add option to show full timestamp in 'trace', from David Ahern. . Add 'record' command in 'trace', to record raw_syscalls:*, from David Ahern. . Add summary option to dump syscall statistics in 'trace', from David Ahern. . Improve error messages in 'trace', providing hints about system configuration steps needed for using it, from Ramkumar Ramachandra. . 'perf trace' now emits hints as to why tracing is not possible, helping the user to setup the system to allow tracing in the desired permission granularity, telling if the problem is due to debugfs not being mounted or with not enough permission for !root, /proc/sys/kernel/perf_event_paranoit value, etc. From Arnaldo Carvalho de Melo. * 'perf record' enhancements: . Check maximum frequency rate for record/top, emitting better error messages, from Jiri Olsa. . 'perf record' code cleanups, from David Ahern. . Improve write_output error message in 'perf record', from Adrian Hunter. . Allow specifying B/K/M/G unit to the --mmap-pages arguments, from Jiri Olsa. . Fix command line callchain attribute tests to handle the new -g/--call-chain semantics, from Arnaldo Carvalho de Melo. * 'perf kvm' enhancements: . Disable live kvm command if timerfd is not supported, from David Ahern. . Fix detection of non-core features, from David Ahern. * 'perf list' enhancements: . Add usage to 'perf list', from David Ahern. . Show error in 'perf list' if tracepoints not available, from Pekka Enberg. * 'perf probe' enhancements: . Support "$vars" meta argument syntax for local variables, allowing asking for all possible variables at a given probe point to be collected when it hits, from Masami Hiramatsu. * 'perf sched' enhancements: . Address the root cause of that 'perf sched' stack initialization build slowdown, by programmatically setting a big array after moving the global variable back to the stack. Fix from Adrian Hunter. * 'perf script' enhancements: . Set up output options for in-stream attributes, from Adrian Hunter. . Print addr by default for BTS in 'perf script', from Adrian Juntmer * 'perf stat' enhancements: . Improved messages when doing profiling in all or a subset of CPUs using a workload as the session delimitator, as in: 'perf stat --cpu 0,2 sleep 10s' from Arnaldo Carvalho de Melo. . Add units to nanosec-based counters in 'perf stat', from David Ahern. . Remove bogus info when using 'perf stat' -e cycles/instructions, from Ramkumar Ramachandra. * 'perf lock' enhancements: . 'perf lock' fixes and cleanups, from Davidlohr Bueso. * 'perf test' enhancements: . Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing and 'perf test', from Adrian Hunter. . Clarify the "sample parsing" test entry, from Arnaldo Carvalho de Melo. . Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test, from Arnaldo Carvalho de Melo. . Memory leak fixes in 'perf test', from Felipe Pena. * 'perf bench' enhancements: . Change the procps visible command-name of invididual benchmark tests plus cleanups, from Ingo Molnar. * Generic perf tooling infrastructure/plumbing changes: . Separating data file properties from session, code reorganization from Jiri Olsa. . Fix version when building out of tree, as when using one of these: $ make help | grep perf perf-tar-src-pkg - Build perf-3.12.0.tar source tarball perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball $ from David Ahern. . Enhance option parse error message, showing just the help lines of the options affected, from Namhyung Kim. . libtraceevent updates from upstream trace-cmd repo, from Steven Rostedt. . Always use perf_evsel__set_sample_bit to set sample_type, from Adrian Hunter. . Memory and mmap leak fixes from Chenggang Qin. . Assorted build fixes for from David Ahern and Jiri Olsa. . Speed up and prettify the build system, from Ingo Molnar. . Implement addr2line directly using libbfd, from Roberto Vitillo. . Separate the GTK support in a separate libperf-gtk.so DSO, that is only loaded when --gtk is specified, from Namhyung Kim. . perf bash completion fixes and improvements from Ramkumar Ramachandra. . Support for Openembedded/Yocto -dbg packages, from Ricardo Ribalda Delgado. And lots and lots of other fixes and code reorganizations that did not make it into the list, see the shortlog, diffstat and the Git log for details!" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits) uprobes: Fix the memory out of bound overwrite in copy_insn() uprobes: Fix the wrong usage of current->utask in uprobe_copy_process() perf tools: Remove unneeded include perf record: Remove post_processing_offset variable perf record: Remove advance_output function perf record: Refactor feature handling into a separate function perf trace: Don't relookup fields by name in each sample perf tools: Fix version when building out of tree perf evsel: Ditch evsel->handler.data field uprobes: Export write_opcode() as uprobe_write_opcode() uprobes: Introduce arch_uprobe->ixol uprobes: Kill module_init() and module_exit() uprobes: Move function declarations out of arch perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes perf: Factor out strncpy() in perf_event_mmap_event() tools/perf: Add required memory barriers perf: Fix arch_perf_out_copy_user default perf: Update a stale comment perf: Optimize perf_output_begin() -- address calculation ...
2013-11-12Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ changes from Ingo Molnar: "The biggest change this cycle are the softirq/hardirq stack interaction and nesting fixes, cleanups and reorganizations from Frederic. This is the longer followup story to the softirq nesting fix that is already upstream (commit ded797547548: "irq: Force hardirq exit's softirq processing on its own stack")" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro powerpc: Tell about irq stack coverage x86: Tell about irq stack coverage irq: Optimize softirq stack selection in irq exit irq: Justify the various softirq stack choices irq: Improve a bit softirq debugging irq: Optimize call to softirq on hardirq exit irq: Consolidate do_softirq() arch overriden implementations x86/irq: Correct comment about i8259 initialization
2013-11-07x86/apic: Disable I/O APIC before shutdown of the local APICFenghua Yu
In reboot and crash path, when we shut down the local APIC, the I/O APIC is still active. This may cause issues because external interrupts can still come in and disturb the local APIC during shutdown process. To quiet external interrupts, disable I/O APIC before shutdown local APIC. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1382578212-4677-1-git-send-email-fenghua.yu@intel.com Cc: <stable@kernel.org> [ I suppose the 'issue' is a hang during shutdown. It's a fine change nevertheless. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06perf/x86/intel: Add Ivy Bridge-EP uncore IRP box supportYan, Zheng
Unlike other uncore boxes, IRP boxes live in PCI buses with no UBOX device. For PCI bus without UBOX device, we find the next bus that has UBOX device and use its 'bus to socket' mapping. Besides the counter/control registers in IRP boxes are not properly aligned. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: eranian@google.com Cc: "Yan Zheng" <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1383197815-17706-2-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxesYan, Zheng
The encoding for filter registers of IvyBridge-EP uncore QPI boxes is completely the same as SandyBridge-EP. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: eranian@google.com Cc: "Yan Zheng" <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1383197815-17706-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06perf: Fix arch_perf_out_copy_user defaultPeter Zijlstra
The arch_perf_output_copy_user() default of __copy_from_user_inatomic() returns bytes not copied, while all other argument functions given DEFINE_OUTPUT_COPY() return bytes copied. Since copy_from_user_nmi() is the odd duck out by returning bytes copied where all other *copy_{to,from}* functions return bytes not copied, change it over and ammend DEFINE_OUTPUT_COPY() to expect bytes not copied. Oddly enough DEFINE_OUTPUT_COPY() already returned bytes not copied while expecting its worker functions to return bytes copied. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: will.deacon@arm.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20131030201622.GR16117@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06x86/cpu: Always print SMP information in /proc/cpuinfoHATAYAMA Daisuke
Currently show_cpuinfo_core() displays cpu core information only if the number of threads per a whole cores is 2 or larger. However, this condition doesn't care about the number of sockets. For example, this condition doesn't hold on systems with two logical cpus consisting of two sockets and a single core on each socket - yet the topology information would be interesting to see in that case as well. I don't know whether or not there are processors in real world by which such configurations are possible, but at least on vitual machine environments, such configuration can occur, typically when no explicit SMP information is provided in advance. For example, on qemu/KVM, SMP information is specified via -smp command-line option, more specifically, its syntax is: -smp n[,cores=cores][,threads=threads][,sockets=sockets][,maxcpus=maxcpus] If this is not specified, qemu tells configuration with n-sockets, 1-core and 1-thread to the guest machine, on which guest, MP information is not displayed in /proc/cpuinfo. I saw this situation on VMWare guest environment, too. To fix this issue, this patch simply removes the condition because this information is useful even if there's only 1 thread. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/5277D644.4090707@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06Merge tag 'v3.12' into x86/cpu, to refresh the branch before queueing up ↵Ingo Molnar
more changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-04Merge branch 'perf/urgent' into perf/core to fix conflictsIngo Molnar
Conflicts: tools/perf/bench/numa.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two fixes: - Fix 'NMI handler took too long to run' false positives [ Genuine NMI overhead speedups will come for v3.13, this commit only fixes a measurement bug ] - Fix perf ring-buffer missed barrier causing (rare) ring-buffer data corruption on ppc64" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix NMI measurements perf: Fix perf ring buffer memory ordering
2013-11-01Merge branch 'linus' into sched/coreIngo Molnar
Resolve cherry-picking conflicts: Conflicts: mm/huge_memory.c mm/memory.c mm/mprotect.c See this upstream merge commit for more details: 52469b4fcd4f Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-30KVM: Fix modprobe failure for kvm_intel/kvm_amdTim Gardner
The x86 specific kvm init creates a new conflicting debugfs directory which causes modprobe issues with kvm_intel and kvm_amd. For example, sudo modprobe kvm_amd modprobe: ERROR: could not insert 'kvm_amd': Bad address The simplest fix is to just rename the directory. The following KVM config options are set: CONFIG_KVM_GUEST=y CONFIG_KVM_DEBUG_FS=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_KVM_DEVICE_ASSIGNMENT=y Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Change debugfs directory name. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-29perf/x86: Fix NMI measurementsPeter Zijlstra
OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29Merge branch 'perf/urgent' into perf/coreIngo Molnar
Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/util/hist.h
2013-10-26x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTCJan Beulich
Even though the omission was found only during code review (originally in the Xen hypervisor, looking through ACPI v5 flags and their meanings and uses), we shouldn't be creating a corresponding platform device in that case. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/5265029D02000078000FC4D2@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-26x86/cpu: Track legacy CPU model data only on 32-bit kernelsJan Beulich
struct cpu_dev's c_models is only ever set inside CONFIG_X86_32 conditionals (or code that's being built for 32-bit only), so there's no use of reserving the (empty) space for the model names in a 64-bit kernel. Similarly, c_size_cache is only used in the #else of a CONFIG_X86_64 conditional, so reserving space for (and in one case even initializing) that field is pointless for 64-bit kernels too. While moving both fields to the end of the structure, I also noticed that: - the c_models array size was one too small, potentially causing table_lookup_model() to return garbage on Intel CPUs (intel.c's instance was lacking the sentinel with family being zero), so the patch bumps that by one, - c_models' vendor sub-field was unused (and anyway redundant with the base structure's c_x86_vendor field), so the patch deletes it. Also rename the legacy fields so that their legacy nature stands out and comment their declarations. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/5265036802000078000FC4DB@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixlets: - fix a (rare-config) build bug - fix a next-gen SGI/UV hw/firmware enumeration bug" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Update UV3 hub revision ID x86/microcode: Correct Kconfig dependencies
2013-10-16perf/x86: Optimize intel_pmu_pebs_fixup_ip()Peter Zijlstra
There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15KVM: Enable pvspinlock after jump_label_init() to avoid VM hangRaghavendra K T
We use jump label to enable pv-spinlock. With the changes in (442e0973e927 Merge branch 'x86/jumplabel'), the jump label behaviour has changed that would result in eventual hang of the VM since we would end up in a situation where slow path locks would halt the vcpus but we will not be able to wakeup the vcpu by lock releaser using unlock kick. Similar problem in Xen and more detailed description is available in a945928ea270 (xen: Do not enable spinlocks before jump_label_init() has executed) This patch splits kvm_spinlock_init to separate jump label changes with pvops patching and also make jump label enabling after jump_label_init(). Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-15x86: Update UV3 hub revision IDRuss Anderson
The UV3 hub revision ID is different than expected. The first revision was supposed to start at 1 but instead will start at 0. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: <stable@kernel.org> # v3.9, v3.10, v3.11 Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15Merge tag 'v3.12-rc5' into perf/coreIngo Molnar
Merge Linux v3.12-rc5, to pick up the latest fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A build fix and a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add reboot quirk for Dell Latitude E5410 x86, build, pci: Fix PCI_MSI build on !SMP
2013-10-11Merge branch 'core/urgent' into sched/coreIngo Molnar
Merge in asm goto fix, to be able to apply the asm/rmwcc.h fix. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09Merge tag 'v3.12-rc4' into sched/coreIngo Molnar
Merge Linux v3.12-rc4 to fix a conflict and also to refresh the tree before applying more scheduler patches. Conflicts: arch/avr32/include/asm/Kbuild Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-08x86, msr: Use file_inode(), not f_mapping->hostAndre Richter
As discussed in [1], exchange f_mapping->host with file_inode(). This is a bug, but happens to be non-manifest in this case. [1] http://lkml.kernel.org/r/20131007190357.GA13318@ZenIV.linux.org.uk Signed-off-by: Andre Richter <andre.o.richter@gmail.com> Link: http://lkml.kernel.org/r/1381224142-3267-1-git-send-email-andre.o.richter@gmail.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-08Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Various fixlets: On the kernel side: - fix a race - fix a bug in the handling of the perf ring-buffer data page On the tooling side: - fix the handling of certain corrupted perf.data files - fix a bug in 'perf probe' - fix a bug in 'perf record + perf sched' - fix a bug in 'make install' - fix a bug in libaudit feature-detection on certain distros" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf session: Fix infinite loop on invalid perf.data file perf tools: Fix installation of libexec components perf probe: Fix to find line information for probe list perf tools: Fix libaudit test perf stat: Set child_pid after perf_evlist__prepare_workload() perf tools: Add default handler for mmap2 events perf/x86: Clean up cap_user_time* setting perf: Fix perf_pmu_migrate_context
2013-10-06x86/reboot: Add reboot quirk for Dell Latitude E5410Ville Syrjälä
Dell Latitude E5410 needs reboot=pci to actually reboot. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://lkml.kernel.org/r/1380888964-14517-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04perf/x86: Suppress duplicated abort LBR recordsAndi Kleen
Haswell always give an extra LBR record after every TSX abort. Suppress the extra record. This only works when the abort is visible in the LBR If the original abort has already left the 16 LBR entries the extra entry will will stay. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379688044-14173-7-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04perf/x86: Add Haswell specific transaction flag reportingAndi Kleen
In the PEBS handler report the transaction flags using the new generic transaction flags facility. Most of them come from the "tsx_tuning" field in PEBSv2, but the abort code is derived from the RAX register reported in the PEBS record. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379688044-14173-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04Merge branch 'perf/urgent' into perf/coreIngo Molnar
Pick up the latest fixes before applying new patches. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-04perf/x86: Clean up cap_user_time* settingPeter Zijlstra
Currently the cap_user_time_zero capability has different tests than cap_user_time; even though they expose the exact same data. Switch from CONSTANT && NONSTOP to sched_clock_stable to also deal with multi cabinet machines and drop the tsc_disabled() check.. non of this will work sanely without tsc anyway. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-nmgn0j0muo1r4c94vlfh23xy@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03x86/simplefb: Mark framebuffer mem-resources as IORESOURCE_BUSY to avoid ↵David Herrmann
bootup warning IORESOURCE_BUSY is used to mark temporary driver mem-resources instead of global regions. This suppresses warnings if regions overlap with a region marked as BUSY. This was always the case for VESA/VGA/EFI framebuffer regions so do the same for simplefb regions. The reason we do this is to allow device handover to real GPU drivers like i915/radeon/nouveau which get the same regions via PCI BARs. Maybe at some point we will be able to unregister platform devices properly during the handover. In this case the simplefb region would get removed before the new region is created. However, this is currently not the case and would require rather huge changes in remove_conflicting_framebuffers(). Add the BUSY marker now and try to eventually rewrite the handover for a next release. Also see kernel/resource.c for more information: /* * if a resource is "BUSY", it's not a hardware resource * but a driver mapping of such a resource; we don't want * to warn for those; some drivers legitimately map only * partial hardware resources. (example: vesafb) */ This suppresses warnings like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 199 at arch/x86/mm/ioremap.c:171 __ioremap_caller+0x2e3/0x390() Info: mapping multiple BARs. Your kernel is fine. Call Trace: dump_stack+0x54/0x8d warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 iomem_map_sanity_check+0xac/0xe0 __ioremap_caller+0x2e3/0x390 ioremap_wc+0x32/0x40 i915_driver_load+0x670/0xf50 [i915] ... Reported-by: Tom Gundersen <teg@jklm.no> Tested-by: Tom Gundersen <teg@jklm.no> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Link: http://lkml.kernel.org/r/1380724864-1757-1-git-send-email-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-02Merge branch 'irq/core-v6' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into irq/core Pull hardirq and softirq nesting updates from Frederic Weisbecker, which fix nesting related stack overruns such as: http://lkml.kernel.org/r/1378330796.4321.50.camel%40pasglop Beyond being a fix, this series also optimizes and reorganizes arch hardirq/softirq stack processing to be faster and more robust. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-02Merge tag 'v3.12-rc3' into irq/coreIngo Molnar
Merge Linux v3.12-rc3, to refresh the tree from a v3.11 base to a v3.12 base. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-02x86/simplefb: Fix overflow causing bogus fall-backTom Gundersen
On my MacBook Air lfb_size is 4M, which makes the bitshit overflow (to 256GB - larger than 32 bits), meaning we fall back to efifb unnecessarily. Cast to u64 to avoid the overflow. Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Link: http://lkml.kernel.org/r/1380644320-1026-1-git-send-email-teg@jklm.no Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-01irq: Consolidate do_softirq() arch overriden implementationsFrederic Weisbecker
All arch overriden implementations of do_softirq() share the following common code: disable irqs (to avoid races with the pending check), check if there are softirqs pending, then execute __do_softirq() on a specific stack. Consolidate the common parts such that archs only worry about the stack switch. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@au1.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@au1.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org>
2013-10-01x86/boot: Further compress CPUs bootup messageBorislav Petkov
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28Merge branches 'sched-urgent-for-linus', 'timers-urgent-for-linus' and ↵Linus Torvalds
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler, timer and x86 fixes from Ingo Molnar: - A context tracking ARM build and functional fix - A handful of ARM clocksource/clockevent driver fixes - An AMD microcode patch level sysfs reporting fixlet * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm: Fix build error with context tracking calls * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast clocksource: of: Respect device tree node status clocksource: exynos_mct: Set IRQ affinity when the CPU goes online arm: clocksource: mvebu: Use the main timer as clock source from DT * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Fix patch level reporting for family 15h
2013-09-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A couple of tooling fixlets and a PMU detection printout fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix PMU detection printout when no PMU is detected perf symbols: Demangle cloned functions perf machine: Fix path unpopulated in machine__create_modules() perf tools: Explicitly add libdl dependency perf probe: Fix probing symbols with optimization suffix perf trace: Add mmap2 handler perf kmem: Make it work again on non NUMA machines
2013-09-28perf/x86: Fix PMU detection printout when no PMU is detectedIngo Molnar
Ran into this cryptic PMU bootup log recently: [ 0.124047] Performance Events: [ 0.125000] smpboot: ... Turns out we print this if no PMU is detected. Fall back to the right condition so that the following is printed: [ 0.122381] Performance Events: no PMU driver, software events only. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-u2fwaUffakjp0qkpRfqljgsn@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28x86: Improve the printout of the SMP bootup CPU tableBorislav Petkov
As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.644008] smpboot: Booting Node 1, Processors: #8 #9 #10 #11 #12 #13 #14 #15 OK [ 1.245006] smpboot: Booting Node 2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK [ 1.864005] smpboot: Booting Node 3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK [ 2.489005] smpboot: Booting Node 4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK [ 3.093005] smpboot: Booting Node 5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK [ 3.698005] smpboot: Booting Node 6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK [ 4.304005] smpboot: Booting Node 7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-27x86/microcode/AMD: Fix patch level reporting for family 15hSuravee Suthikulpanit
On AMD family 14h, applying microcode patch on the a core (core0) would also affect the other core (core1) in the same compute unit. The driver would skip applying the patch on core1, but it still need to update kernel structures to reflect the proper patch level. The current logic is not updating the struct ucode_cpu_info.cpu_sig.rev of the skipped core. This causes the /sys/devices/system/cpu/cpu1/microcode/version to report incorrect patch level as shown below: $ grep . cpu?/microcode/version cpu0/microcode/version:0x600063d cpu1/microcode/version:0x6000626 cpu2/microcode/version:0x600063d cpu3/microcode/version:0x6000626 cpu4/microcode/version:0x600063d Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: <bp@alien8.de> Cc: <jacob.w.shin@gmail.com> Cc: <herrmann.der.user@googlemail.com> Link: http://lkml.kernel.org/r/1285806432-1995-1-git-send-email-suravee.suthikulpanit@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "An EFI fix and two reboot-quirk fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Fix apparent cut-n-paste mistake in Dell reboot workaround x86/reboot: Add quirk to make Dell C6100 use reboot=pci automatically x86, efi: Don't map Boot Services on i386
2013-09-25Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Assorted standalone fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add model number for Avoton Silvermont perf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page' perf/x86/intel/uncore: Don't use smp_processor_id() in validate_group() perf: Update ABI comment tools lib lk: Uninclude linux/magic.h in debugfs.c perf tools: Fix old GCC build error in trace-event-parse.c:parse_proc_kallsyms() perf probe: Fix finder to find lines of given function perf session: Check for SIGINT in more loops perf tools: Fix compile with libelf without get_phdrnum perf tools: Fix buildid cache handling of kallsyms with kcore perf annotate: Fix objdump line parsing offset validation perf tools: Fill in new definitions for madvise()/mmap() flags perf tools: Sharpen the libaudit dependencies test
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 18:36:13 +0000