summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2008-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
2008-02-01PCI: use dev_printk in x86 quirk messagesbjorn.helgaas@hp.com
Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02x86: fix bootup crash in native_read_tsc()Ingo Molnar
fix bootup crash in native_read_tsc() that was reported on an Athlon-XP and bisected. The correct feature boundary for X86_FEATURE_MFENCE_RDTSC is not XMM but XMM2. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01x86: avoid section mismatch involving arch_register_cpuAlexander van Heukelum
Avoid section mismatch involving arch_register_cpu. Marking arch_register_cpu as __init and removing the export for non-hotplug-cpu configurations makes the following warning go away: Section mismatch in reference from the function arch_register_cpu() to the function .devinit.text:register_cpu() The function arch_register_cpu() references the function __devinit register_cpu(). This is often because arch_register_cpu lacks a __devinit annotation or the annotation of register_cpu is wrong. The only external user of arch_register_cpu in the tree is in drivers/acpi/processor_core.c where it is guarded by ACPI_HOTPLUG_CPU (which depends on HOTPLUG_CPU). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: fixes for lookup_address argsHarvey Harrison
Signedness mismatches in level argument. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: fix sparse warnings in cpu/common.cHarvey Harrison
The casts will always be needed, may as well make them the right signedness. The ebx variables can easily be unsigned, may as well. arch/x86/kernel/cpu/common.c:261:21: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/common.c:261:21: expected unsigned int *eax arch/x86/kernel/cpu/common.c:261:21: got int *<noident> arch/x86/kernel/cpu/common.c:262:9: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:262:9: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:262:9: got int *<noident> arch/x86/kernel/cpu/common.c:263:9: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/common.c:263:9: expected unsigned int *ecx arch/x86/kernel/cpu/common.c:263:9: got int *<noident> arch/x86/kernel/cpu/common.c:264:9: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/common.c:264:9: expected unsigned int *edx arch/x86/kernel/cpu/common.c:264:9: got int *<noident> arch/x86/kernel/cpu/common.c:293:30: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:293:30: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:293:30: got int *<noident> arch/x86/kernel/cpu/common.c:350:22: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/common.c:350:22: expected unsigned int *eax arch/x86/kernel/cpu/common.c:350:22: got int *<noident> arch/x86/kernel/cpu/common.c:351:10: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:351:10: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:351:10: got int *<noident> arch/x86/kernel/cpu/common.c:352:10: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/common.c:352:10: expected unsigned int *ecx arch/x86/kernel/cpu/common.c:352:10: got int *<noident> arch/x86/kernel/cpu/common.c:353:10: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/common.c:353:10: expected unsigned int *edx arch/x86/kernel/cpu/common.c:353:10: got int *<noident> arch/x86/kernel/cpu/common.c:362:30: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:362:30: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:362:30: got int *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: make early_console static in early_printk.cHarvey Harrison
Not necessary to expose it, also fixes sparse warning. arch/x86/kernel/early_printk.c:196:16: warning: symbol 'early_console' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: fix section mismatch warning in kernel/pci-calgarySam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x1eb41): Section mismatch in reference from the function calgary_handle_quirks() to the function .init.text:calgary_set_split_completion_timeout() calgary_handle_quirks() are only called at __init time (in calgary_init_one() via handle_quirks ops). So annotate this function and the sister function __init. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: fix section mismatch warning in acpi/boot.cSam Ravnborg
Fix following warning: WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x13d15): Section mismatch in reference from the function acpi_map_lsapic() to the function .cpuinit.text:mp_register_lapic() The function acpi_map_lsapic() is exported and thus not annotated. But the sole user is acpi/processor_core.c in a __cpuinit path. So create a small wrapper and put back the annotation thus avoiding the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: fix section mismatch warnings when referencing notifiersSam Ravnborg
Fix the following warnings: WARNING: arch/x86/kernel/built-in.o(.exit.text+0xf8): Section mismatch in reference from the function msr_exit() to the variable .cpuinit.data:msr_class_cpu_notifier WARNING: arch/x86/kernel/built-in.o(.exit.text+0x158): Section mismatch in reference from the function cpuid_exit() to the variable .cpuinit.data:cpuid_class_cpu_notifier WARNING: arch/x86/kernel/built-in.o(.exit.text+0x171): Section mismatch in reference from the function microcode_exit() to the variable .cpuinit.data:mc_cpu_notifier In all three cases there were a function annotated __exit that referenced a variable annotated __cpuinitdata. The fix was to replace the annotation of the notifier with __refdata to tell modpost that the reference to a _cpuinit function in the notifier are OK. The unregister call that references the notifier variable will simple delete the function pointer so there is no problem ignoring the reference. Note: This looks like another case where __cpuinit has been used as replacement for proper use of CONFIG_HOTPLUG_CPU to decide what code are used for HOTPLUG_CPU. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86: silence section mismatch warning in smpboot_64.cSam Ravnborg
Silence the following warning: WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x17cd3): Section mismatch in reference from the function remove_cpu_from_maps() to the variable .cpuinit.data:cpu_initialized remove_cpu:maps() had a single user: __cpu_disable() so mark it static and annotate it with __ref to silence the warning from modpost. _cpu_disable() has a single user in kernel/cpu.c: => take_cpu_down() which again has a single user in the following call: => __stop_machine_run(take_cpu_down, &tcd_param, cpu); Here a kthread is created. So maybe the warning is correct and the right fix is to remove the __cpuinitdata annotation of cpu_initialized? Note: The analysis were disturbed by the fact that we had a variable with the same name in cpu/common.c - but this is 32 bit only] Note: Should smpboot_64 use cpu_clear()? Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86_64: make bootmap_start page align v6Yinghai Lu
boot oopses when a system has 64 or 128 GB of RAM installed: Calling initcall 0xffffffff80bc33b6: sctp_init+0x0/0x711() BUG: unable to handle kernel NULL pointer dereference at 000000000000005f IP: [<ffffffff802bfe55>] proc_register+0xe7/0x10f PGD 0 Oops: 0000 [1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #6 RIP: 0010:[<ffffffff802bfe55>] [<ffffffff802bfe55>] proc_register+0xe7/0x10f RSP: 0000:ffff810824c57e60 EFLAGS: 00010246 RAX: 000000000000d7d7 RBX: ffff811024c5fa80 RCX: ffff810824c57e08 RDX: 0000000000000000 RSI: 0000000000000195 RDI: ffffffff80cc2460 RBP: ffffffffffffffff R08: 0000000000000000 R09: ffff811024c5fa80 R10: 0000000000000000 R11: 0000000000000002 R12: ffff810824c57e6c R13: 0000000000000000 R14: ffff810824c57ee0 R15: 00000006abd25bee FS: 0000000000000000(0000) GS:ffffffff80b4d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000005f CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff810824c56000, task ffff812024c52000) Stack: ffffffff80a57348 0000019500000000 ffff811024c5fa80 0000000000000000 00000000ffffff97 ffffffff802bfef0 0000000000000000 ffffffffffffffff 0000000000000000 ffffffff80bc3b4b ffff810824c57ee0 ffffffff80bc34a5 Call Trace: [<ffffffff802bfef0>] ? create_proc_entry+0x73/0x8a [<ffffffff80bc3b4b>] ? sctp_snmp_proc_init+0x1c/0x34 [<ffffffff80bc34a5>] ? sctp_init+0xef/0x711 [<ffffffff80b976e3>] ? kernel_init+0x175/0x2e1 [<ffffffff8020ccf8>] ? child_rip+0xa/0x12 [<ffffffff80b9756e>] ? kernel_init+0x0/0x2e1 [<ffffffff8020ccee>] ? child_rip+0x0/0x12 Code: 1e 48 83 7b 38 00 75 08 48 c7 43 38 f0 e8 82 80 48 83 7b 30 00 75 08 48 c7 43 30 d0 e9 82 80 48 c7 c7 60 24 cc 80 e8 bd 5a 54 00 <48> 8b 45 60 48 89 6b 58 48 89 5d 60 48 89 43 50 fe 05 f5 25 a0 RIP [<ffffffff802bfe55>] proc_register+0xe7/0x10f RSP <ffff810824c57e60> CR2: 000000000000005f ---[ end trace 02c2d78def82877a ]--- Kernel panic - not syncing: Attempted to kill init! it turns out some variables near end of bss are corrupted already. in System.map we have ffffffff80d40420 b rsi_table ffffffff80d40620 B krb5_seq_lock ffffffff80d40628 b i.20437 ffffffff80d40630 b xprt_rdma_inline_write_padding ffffffff80d40638 b sunrpc_table_header ffffffff80d40640 b zero ffffffff80d40644 b min_memreg ffffffff80d40648 b rpcrdma_tk_lock_g ffffffff80d40650 B sctp_assocs_id_lock ffffffff80d40658 B proc_net_sctp ffffffff80d40660 B sctp_assocs_id ffffffff80d40680 B sysctl_sctp_mem ffffffff80d40690 B sysctl_sctp_rmem ffffffff80d406a0 B sysctl_sctp_wmem ffffffff80d406b0 b sctp_ctl_socket ffffffff80d406b8 b sctp_pf_inet6_specific ffffffff80d406c0 b sctp_pf_inet_specific ffffffff80d406c8 b sctp_af_v4_specific ffffffff80d406d0 b sctp_af_v6_specific ffffffff80d406d8 b sctp_rand.33270 ffffffff80d406dc b sctp_memory_pressure ffffffff80d406e0 b sctp_sockets_allocated ffffffff80d406e4 b sctp_memory_allocated ffffffff80d406e8 b sctp_sysctl_header ffffffff80d406f0 b zero ffffffff80d406f4 A __bss_stop ffffffff80d406f4 A _end and setup_node_bootmem() will use that page 0xd40000 for bootmap Bootmem setup node 0 0000000000000000-0000000828000000 NODE_DATA [000000000008a485 - 0000000000091484] bootmap [0000000000d406f4 - 0000000000e456f3] pages 105 Bootmem setup node 1 0000000828000000-0000001028000000 NODE_DATA [0000000828000000 - 0000000828006fff] bootmap [0000000828007000 - 0000000828106fff] pages 100 Bootmem setup node 2 0000001028000000-0000001828000000 NODE_DATA [0000001028000000 - 0000001028006fff] bootmap [0000001028007000 - 0000001028106fff] pages 100 Bootmem setup node 3 0000001828000000-0000002028000000 NODE_DATA [0000001828000000 - 0000001828006fff] bootmap [0000001828007000 - 0000001828106fff] pages 100 setup_node_bootmem() makes NODE_DATA cacheline aligned, and bootmap is page-aligned. the patch updates find_e820_area() to make sure we can meet the alignment constraints. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01x86_64: add debug name for early_resYinghai Lu
helps debugging problems in this rather murky area of code. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31x86: fix small sparse warningHarvey Harrison
arch/x86/kernel/ds.c:226:9: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31x86: fix sparse warning in kernel/scx200_32.cHarvey Harrison
arch/x86/kernel/scx200_32.c:68:72: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31x86: c_p_a clflush_cache_range fixHuang, Ying
Because in i386 early boot stage, boot_cpu_data may be not available, which makes clflush_cach_range() into infinite loop, which is called by change_page_attr(). This patch fixes this by setting boot_cpu_data.x86_clflush_size in early_cpu_detect(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31x86: fix sparse warnings in intel_cacheinfo.cHarvey Harrison
arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: expected unsigned int *eax arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: expected unsigned int *ebx arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: expected unsigned int *ecx arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: got int * arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: expected unsigned int *edx arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: got int * Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: fix arch/x86/kernel/test_nx.c modular build bugIngo Molnar
fix this modular build bug: > CC [M] arch/x86/kernel/test_nx.o > {standard input}: Assembler messages: > {standard input}:58: Error: cannot represent relocation type BFD_RELOC_64 > {standard input}:59: Error: cannot represent relocation type BFD_RELOC_64 > make[2]: *** [arch/x86/kernel/test_nx.o] Error 1 > make[1]: *** [arch/x86/kernel] Error 2 Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: fix overlap between pagetable with bss sectionYinghai Lu
one early crash on one 8 node 256g machine: Command line: console=uart8250,io,0x3f8,115200n8 initrd=kernel.org/mydisk11_x86_64.gz rw root=/dev/ram0 debug initcall_debug apic=debug acpi.debug_level=0x0000000f pci=routeirq ip=dhcp load_ramdisk=1 ramdisk_size=131072 BOOT_IMAGE=kernel.org/bzImage_2.6.25_k8.1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable) BIOS-e820: 00000000dffe0000 - 00000000dffee000 (ACPI data) BIOS-e820: 00000000dffee000 - 00000000dffff050 (ACPI NVS) BIOS-e820: 00000000dffff050 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000004020000000 (usable) Early serial console at I/O port 0x3f8 (options '115200n8') console [uart0] enabled end_pfn_map = 67239936 Kernel panic - not syncing: Duplicated early reservation d40000-e42000 Pid: 0, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #3 Call Trace: [<ffffffff80221545>] lapic_get_maxlvt+0x0/0x10 [<ffffffff80221657>] clear_local_APIC+0x5/0xcf [<ffffffff80221726>] disable_local_APIC+0x5/0x17 [<ffffffff8021fe16>] smp_send_stop+0x46/0x4c [<ffffffff80235293>] panic+0x94/0x13e [<ffffffff80bc3b03>] sctp_eps_proc_init+0x12/0x34 [<ffffffff80b9f1c5>] reserve_early+0x30/0x6c [<ffffffff80803925>] init_memory_mapping+0x2cd/0x2dc [<ffffffff80b9dc01>] setup_arch+0x21f/0x44e [<ffffffff80b978be>] start_kernel+0x6f/0x2c7 [<ffffffff80b971cc>] _sinittext+0x1cc/0x1d3 it turns out there is overlap between pgtable and bss... in System.map we have ffffffff80d40420 b rsi_table ffffffff80d40620 B krb5_seq_lock ffffffff80d40628 b i.20437 ffffffff80d40630 b xprt_rdma_inline_write_padding ffffffff80d40638 b sunrpc_table_header ffffffff80d40640 b zero ffffffff80d40644 b min_memreg ffffffff80d40648 b rpcrdma_tk_lock_g ffffffff80d40650 B sctp_assocs_id_lock ffffffff80d40658 B proc_net_sctp ffffffff80d40660 B sctp_assocs_id ffffffff80d40680 B sysctl_sctp_mem ffffffff80d40690 B sysctl_sctp_rmem ffffffff80d406a0 B sysctl_sctp_wmem ffffffff80d406b0 b sctp_ctl_socket ffffffff80d406b8 b sctp_pf_inet6_specific ffffffff80d406c0 b sctp_pf_inet_specific ffffffff80d406c8 b sctp_af_v4_specific ffffffff80d406d0 b sctp_af_v6_specific ffffffff80d406d8 b sctp_rand.33270 ffffffff80d406dc b sctp_memory_pressure ffffffff80d406e0 b sctp_sockets_allocated ffffffff80d406e4 b sctp_memory_allocated ffffffff80d406e8 b sctp_sysctl_header ffffffff80d406f0 b zero ffffffff80d406f4 A __bss_stop ffffffff80d406f4 A _end need to round up table_start to PAGE_SIZE. also make the panic more informative. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: early boot debugging via FireWire (ohci1394_dma=early)Bernhard Kaindl
This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fixes some bugs about EFI memory map handlingHuang, Ying
This patch fixes some bugs of EFI memory handing code. - On x86_64, it is possible that EFI memory map can not be mapped via identity map, so efi_map_memmap is removed, just use early_ioremap. - On i386, the EFI memory map mapping take effect cross paging_init, so it is not necessary to use efi_map_memmap. - EFI memory map is unmapped in efi_enter_virtual_mode to avoid early_ioremap leak. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use reboot_type on EFI 32Huang, Ying
This patch makes reboot_type of BOOT_EFI is used on i386 too. Because correpsonding reboot code of i386 and x86_64 is merged. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: rodata config hookupIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add testcases for RODATA and NX protections/attributesArjan van de Ven
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd. I also cleaned up the NX test code quite a bit, and got rid of the ugly exception table sorting stuff. From: Arjan van de Ven <arjan@linux.intel.com> This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option as well as the NX CPU feature/mappings. Both testcases can move to tests/ once that patch gets merged into mainline. (I'm half considering moving the rodata test into mm/init.c but I'll wait with that until init.c is unified) As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h for the RODATA sections, which lead to 1 page less being marked read only. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: cpa: move flush to cpaThomas Gleixner
The set_memory_* and set_pages_* family of API's currently requires the callers to do a global tlb flush after the function call; forgetting this is a very nasty deathtrap. This patch moves the global tlb flush into each of the callers Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: convert CPA users to the new set_page_ APIArjan van de Ven
This patch converts various users of change_page_attr() to the new, more intent driven set_page_*/set_memory_* API set. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: introduce max_pfn_mappedThomas Gleixner
64bit uses end_pfn_map and 32bit uses max_low_pfn. There are several files which have #ifdef'ed defines which map either to end_pfn_map or max_low_pfn. Replace this by a universal define and clean up all the other instances. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: do not PSE on CONFIG_DEBUG_PAGEALLOC=yIngo Molnar
get more testing of the c_p_a() code done by not turning off PSE on DEBUG_PAGEALLOC. this simplifies the early pagetable setup code, and tests the largepage-splitup code quite heavily. In the end, all the largepages will be split up pretty quickly, so there's no difference to how DEBUG_PAGEALLOC worked before. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix some bugs about EFI runtime code mappingHuang, Ying
This patch fixes some bugs of making EFI runtime code executable. - Use change_page_attr in i386 too. Because the runtime code may be mapped not through ioremap. - If there is no _PAGE_NX in __supported_pte_mask, the change_page_attr is not called. - Make efi_ioremap map pages as PAGE_KERNEL_EXEC_NOCACHE, because EFI runtime code may be mapped through efi_ioremap. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix more non-global TLB flushesIngo Molnar
fix more __flush_tlb() instances, out of caution. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove set_kernel_exec()Andi Kleen
The SMP trampoline always runs in real mode, so making it executable in the page tables doesn't make much sense because it executes before page tables are set up. That was the only user of set_kernel_exec(). Remove set_kernel_exec(). Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix EISA ioremapIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86 32-bit boot: rename bt_ioremap() to early_ioremap()Huang, Ying
This patch renames bt_ioremap to early_ioremap, which is used in x86_64. This makes it easier to merge i386 and x86_64 usage. [ mingo@elte.hu: fix ] Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: replace boot_ioremap() with enhanced bt_ioremap() - remove boot_ioremap()Huang, Ying
This patch replaces boot_ioremap invokation with bt_ioremap and removes the boot_ioremap implementation. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremapHuang, Ying
This patch makes it possible for bt_ioremap() to be used before paging_init(), via providing an early implementation of set_fixmap() that can be used before paging_init(). This way boot_ioremap() can be replaced by bt_ioremap(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix recursion in arch/x86/kernel/cpu/mcheck/mce_amd_64.cYinghai Lu
remove the recursion from this function. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add mm parameter to paravirt_alloc_pdJeremy Fitzhardinge
Add mm to paravirt_alloc_pd, partly to make it consistent with paravirt_alloc_pt, and because later changes will make use of it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change aper valid checking sequenceYinghai Lu
old sequence: size ==> >4G ==> point to RAM changed to: >4G ==> point to RAM ==> size some bios even leave aper to unclear, so check size at last. To avoid reporting: Node 0: Aperture @ 4a42000000 size 32 MB Aperture too small (32 MB) with this change we will get: Node 0: Aperture @ 4a42000000 size 32 MB Aperture beyond 4G. Ignoring. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: force enable HPET on (some?) ICH9 boardsAlistair John Strachan
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS option for enabling the HPET. The same ICH workaround used for 6,7,8 can be applied to 9. Here I enable the only PCI id that was visible on my system. I have confirmed the HPETs work both from userspace and as a clocksource for the running kernel (2.6.24 here) after applying this patch. Force enabled HPET at base address 0xfed00000 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: not set boot cpu in cpu_online_map in smp_prepare_boot_cpu()Yinghai Lu
in init/main.c boot_cpu_init() does that before. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: not set boot cpu in cpu_present_map againYinghai Lu
in init/main.c boot_cpu_init() already does that before setup_arch Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in setup_64.cSam Ravnborg
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x7a3): Section mismatch: reference to .init.text:amd_detect_cmp in 'init_amd' The function amd_detect_cmp were annotated __init and was only used from init_amd() which are annotated __cpuinit. Annotate amd_detect_cmp() with _cpuinit to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in topology.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu' Annotating exported symbols are wrong. Previously the warning were hidden by avoiding the export in the non HOTPLUG_CPU case but the improved checks in modpost caught it anyway. Fix it by removing the __cpuinit annotation and rearrange the code a bit to save one ifdef/endif pair. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in early-quirks.cSam Ravnborg
Fix following warnings: WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data: Warning was caused by access to the __initdata annotated variable from the non-annotated static function check_dev_quirk(). check_dev_quirk() were only used from a function annotated __init so add __init annotation to check_dev_quirk() to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in acpi/boot.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic' The exported function acpi_unmap_lsapic() references the variable num_processors that is annotated __cpuinitdata. Remove the annotation of num_processors as we never know when an exported function are called. And drop the needless initialsation to 0. Warning was seen on 64 bit but similar pattern were seen in 32 bit - so fix it up there too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in process_*.cSam Ravnborg
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable' [Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too] mwait_usable() were only used by a function annotated __cpuinit so annotate mwait_usable() with __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in mcheck/mce_amd_64.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback' threshold_cpu_callback() is only used by threshold_cpu_notifier. threshold_cpu_notifier is only used for cpu hot plug as it is registered using register_hotcpu_notifier(). Mark them both __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix section mismatch warning in mcheck/mce_64.cSam Ravnborg
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback' mce_cpu_callback() is only used by mce_cpu_notofier. The notifier is only used for hotplugable cpu's as it is registered using register_hotcpu_notifier(), Annotate them both __cpuinit to fix the warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add the RDC machine specific reboot fixupFlorian Fainelli
The RDC R-321x SoC needs a reboot fixup which uses its internal hardware watchdog set to reset the CPU on next tick. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: GEODE: update GPIO API to support setting multiple GPIOs at onceAndres Salomon
The existing Geode GPIO API only allows for updating one GPIO at once. There are instances where users want to update multiple GPIOs at once. With the current API, they are given two choices; either ignore the GPIO API: outl(0xc000, gpio_base + GPIO_OUTPUT_VAL); outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE); Alternatively, call each GPIO update separately: geode_gpio_set(14, GPIO_OUTPUT_VAL); geode_gpio_set(15, GPIO_OUTPUT_VAL); geode_gpio_set(14, GPIO_OUTPUT_ENABLE); geode_gpio_set(15, GPIO_OUTPUT_ENABLE); Neither are desirable. This patch changes the GPIO API to allow for setting of multiple GPIOs at once; rather than being passed an integer, we pass a bitmask and provide a translation function. The above code would now look like this: geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL); geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE); Since there are no upstream users of the GPIO API yet (afaik), best to change this now. This also adds a bit of sanity checking; it is no longer possible to use a GPIO above 28. Note the semantics of geode_gpio_isset() have changed: geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...) will only return true iff both GPIOs are set. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 14:38:03 +0000