summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/smpboot.c
AgeCommit message (Collapse)Author
2009-06-12x86: make zap_low_mapping could be used earlyYinghai Lu
Only one cpu is there, just call __flush_tlb for it. Fixes the following boot warning on x86: [ 0.000000] Memory: 885032k/915540k available (5993k kernel code, 29844k reserved, 3842k data, 428k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffe17000 - 0xfffff000 (1952 kB) [ 0.000000] vmalloc : 0xf8615000 - 0xffe15000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7e15000 ( 894 MB) [ 0.000000] .init : 0xc19a5000 - 0xc1a10000 ( 428 kB) [ 0.000000] .data : 0xc15da4bb - 0xc199af6c (3842 kB) [ 0.000000] .text : 0xc1000000 - 0xc15da4bb (5993 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/smp.c:369 smp_call_function_many+0x50/0x1b0() [ 0.000000] Hardware name: System Product Name [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip #52504 [ 0.000000] Call Trace: [ 0.000000] [<c104aa16>] warn_slowpath_common+0x65/0x95 [ 0.000000] [<c104aa58>] warn_slowpath_null+0x12/0x15 [ 0.000000] [<c1073bbe>] smp_call_function_many+0x50/0x1b0 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c1073d4f>] smp_call_function+0x31/0x58 [ 0.000000] [<c1037615>] ? do_flush_tlb_all+0x0/0x41 [ 0.000000] [<c104f635>] on_each_cpu+0x26/0x65 [ 0.000000] [<c10374b5>] flush_tlb_all+0x19/0x1b [ 0.000000] [<c1032ab3>] zap_low_mappings+0x4d/0x56 [ 0.000000] [<c15d64b5>] ? printk+0x14/0x17 [ 0.000000] [<c19b42a8>] mem_init+0x23d/0x245 [ 0.000000] [<c19a56a1>] start_kernel+0x17a/0x2d5 [ 0.000000] [<c19a5347>] ? unknown_bootoption+0x0/0x19a [ 0.000000] [<c19a5039>] __init_begin+0x39/0x41 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-07x86, apic: Fix dummy apic read operation together with broken MP handlingCyrill Gorcunov
Ingo Molnar reported that read_apic is buggy novadays: [ 0.000000] Using APIC driver default [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/apic/apic.c:254 native_apic_read_dummy+0x2d/0x3b() [ 0.000000] Hardware name: HP OmniBook PC Indeed we still rely on apic->read operation for SMP compiled kernel. And instead of disfigure the SMP code with #ifdef we allow to call apic->read. To capture any unexpected results we check for apic->read being called for sane reason via WARN_ON_ONCE but(!) instead of OR we should use AND logical operation (thanks Yinghai for spotting the root of the problem). Along with that we could be have bad MP table and we are to fix it that way no SMP started and no complains about BIOS bug if apic was just disabled via command line. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20090607124840.GD4547@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-19x86: smpboot - wakeup_secondary should be done via __cpuinit sectionCyrill Gorcunov
A caller (do_boot_cpu) already has __cpuinit attribute. Since HOTPLUG_CPU depends on SMP && HOTPLUG it doesn't lead to panic at moment. [ Impact: cleanup ] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <20090418194528.GD25510@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08x86: consistent about warm_reset_vector for UN_NON_UNIQUE_APICYinghai Lu
Impact: cleanup didn't set it for UV_NON_UNIQUE_APIC, so don't restore it Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <49D6A6B9.6060501@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08x86: make wakeup_secondary_cpu_via_init staticYinghai Lu
Impact: cleanup Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <49D6A692.6040400@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13cpumask: use new cpumask functions throughout x86Rusty Russell
Impact: cleanup 1) &cpu_online_map -> cpu_online_mask 2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next 3) cpu_*_map manipulation -> init_cpu_* / set_cpu_* Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_tRusty Russell
Impact: reduce kernel memory usage when CONFIG_CPUMASK_OFFSTACK=y Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: convert node_to_cpumask_map[] to cpumask_var_tRusty Russell
Impact: reduce kernel memory usage when CONFIG_CPUMASK_OFFSTACK=y Straightforward conversion: done for 32 and 64 bit kernels. node_to_cpumask_map is now a cpumask_var_t array. 64-bit used to be a dynamic cpumask_t array, and 32-bit used to be a static cpumask_t array. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13x86: unify 32 and 64-bit node_to_cpumask_mapRusty Russell
Impact: cleanup We take the 64-bit code and use it on 32-bit as well. The new file is called mm/numa.c. In a minor cleanup, we use cpu_none_mask instead of declaring a local cpu_mask_none. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_tRusty Russell
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y In most places it's cleaner to use the accessors cpu_sibling_mask() and cpu_core_mask() wrappers which already exist. I couldn't avoid cleaning up the access in oprofile, either. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: remove cpu_coregroup_map: x86Rusty Russell
Impact: cleanup cpu_coregroup_mask is the New Hotness. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-08x86: remove smp_apply_quirks()/smp_checks()Yinghai Lu
Impact: cleanup and code size reduction on 64-bit This code is only applied to Intel Pentium and AMD K7 32-bit cpus. Move those checks to intel_init()/amd_init() for 32-bit so 64-bit will not build this code. Also change to use cpu_index check to see if we need to emit warning. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <49B377D2.8030108@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: apic: simplify secondary CPU wakeup methodsIngo Molnar
Impact: cleanup - rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to make it apparent that this is an SMP-only method - handle NULL ->wakeup_secondary_cpus to mean the default INIT wakeup sequence - this allows simplification of the APIC driver templates. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: remove update_apic from x86_quirksYinghai Lu
Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: remove ->store_NMI_vector()Ingo Molnar
Impact: cleanup It's not used by anything anymore. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: remove duplicate asm/apic.h inclusionsIngo Molnar
Impact: cleanup Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: remove genapic.hIngo Molnar
Impact: cleanup Remove genapic.h and remove all references to it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86: add x2apic configYinghai Lu
Impact: cleanup so could deselect x2apic and INTR_REMAP will select x2apic Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15x86: make 32bit to call enable_IO_APIC early like 64bitYinghai Lu
Impact: cleanup So we remove some #ifdefs. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09Merge branch 'x86/paravirt' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-voyager/voyager_smp.c
2009-02-05smp, generic: introduce arch_disable_smp_support() instead of ↵Ingo Molnar
disable_ioapic_setup() Impact: cleanup disable_ioapic_setup() in init/main.c is ugly as the function is x86-specific. The #ifdef inline prototype there is ugly too. Replace it with a generic arch_disable_smp_support() function - which has a weak alias for non-x86 architectures and for non-ioapic x86 builds. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31x86: pass in cpu number to switch_to_new_gdt()Brian Gerst
Impact: cleanup, prepare for xen boot fix. Xen needs to call this function very early to setup the GDT and per-cpu segments. Remove the call to smp_processor_id() and just pass in the cpu number. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31x86: update copyrightsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: don't treat bigsmp as non-standardYinghai Lu
just like 64 bit switch from flat logical APIC messages to flat physical mode automatically. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: fix compiling with 64bit with def_to_bigsmpYinghai Lu
only need to do cut off with 32bit Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: allow more than 8 cpus to be used on 32-bitYinghai Lu
X86_PC is the only remaining 'sub' architecture, so we dont need it anymore. This also cleans up a few spurious references to X86_PC in the driver space - those certainly should be X86. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: rename X86_GENERICARCH to X86_32_NON_STANDARDIngo Molnar
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures that are not included in the default build. Rename it to X86_32_NON_STANDARD. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: generalize boot_cpu_idIngo Molnar
x86/Voyager can boot on non-zero processors. While that can probably be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id for now for easier transition - and expand it to all of x86. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: move mach-default/*.h files to asm/Ingo Molnar
We are getting rid of subarchitecture support - move the hook files to asm/. (These are now stale and should be replaced with more explicit runtime mechanisms - but the transition is simpler this way.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: remove mach_apic.hIngo Molnar
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects on smp.h and apic.h.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: refactor ->wake_cpuIngo Molnar
- remove macro wrappers Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: eliminate asm/mach-default/mach_wakecpu.hIngo Molnar
Spread mach_wakecpu.h's definitions into apic.h and genapic.h and remove mach_wakecpu.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: refactor ->inquire_remote_apic() methodsIngo Molnar
Nothing exciting - a few subarches dont want APIC remote reads to be performed - the others are content with the default method. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: refactor ->store/restore_NMI_vector() methodsIngo Molnar
Only NUMAQ does something substantial here, because it initializes via NMIs (not via INIT as standard SMP startup) - so it needs to store and restore the NMI vector. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: refactor ->smp_callin_clear_local_apic() methodsIngo Molnar
Only NUMAQ does something substantial here, because it initializes via NMIs (not via INIT as standard SMP startup) - so it needs to reset the APIC. - extend the generic code to handle NULL methods - clear out dummy methods and replace them with NULL - clean up: remove wrapper macros, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, smp: refactor ->wait_for_init_deassert()Ingo Molnar
- spread out the namespace on a per APIC driver basis - handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method - remove NUMAQ and Summit handlers Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86: refactor ->check_phys_apicid_present() subarch methodsIngo Molnar
- spread out the namespace to per driver methods - extend it to 64-bit as well so that we can use apic->check_phys_apicid_present() unconditionally Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86: refactor ->setup_portio_remap() subarch methodsIngo Molnar
Only NUMAQ has a real ->setup_portio_remap() method, the other subarchitectures define it but keep it empty. So mark the vector as NULL, extend the generic code to handle NULL -setup_portio_remap() entries and remove all the empty handlers. Also move the NUMAQ method from the header file into the apic driver .c file. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, apic: clean up ->cpu_present_to_apicid()Ingo Molnar
- separate the namespace - remove macros Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, apic: clean up ->apicid_to_node()Ingo Molnar
- separate the namespace - remove macros Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, apic: clean up ->setup_apic_routing()Ingo Molnar
- separate the namespace - remove macros - remove namespace clash on 64-bit Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, apic: rename genapic::apic_destination_logical to genapic::dest_logicalIngo Molnar
This field name was unreasonably long - shorten it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86: clean up the APIC_DEST_LOGICAL logicIngo Molnar
Impact: cleanup The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in a rather nasty way by re-defining it to zero. That is infinitely fragile and makes it very hard to see what to code really does in a given context. The very same constant has different meanings and values - depending on which subarch is enabled. Untangle this mess by never undefining the constant, but instead propagating the right values into the genapic driver templates. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-27x86: initialize per-cpu GDT segment in per-cpu setupBrian Gerst
Impact: cleanup Rename init_gdt() to setup_percpu_segment(), and move it to setup_percpu.c. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21x86: uv cleanupTejun Heo
Impact: cleanup Make the following uv related cleanups. * collect visible uv related definitions and interfaces into uv/uv.h and use it. this cleans up the messy situation where on 64bit, uv is defined properly, on 32bit generic it's dummy and on the rest undefined. after this clean up, uv is defined on 64 and dummy on 32. * update uv_flush_tlb_others() such that it takes cpumask of to-be-flushed cpus as argument, instead of that minus self, and returns yet-to-be-flushed cpumask, instead of modifying the passed in parameter. this interface change will ease dummy implementation of uv_flush_tlb_others() and makes uv tlb flush related stuff defined in tlb_uv proper. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move kernelstack from PDA to per-cpu.Brian Gerst
Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move current task from PDA to per-cpu and consolidate with 32-bit.Brian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-16x86: misc clean up after the percpu updateTejun Heo
Do the following cleanups: * kill x86_64_init_pda() which now is equivalent to pda_init() * use per_cpu_offset() instead of cpu_pda() when initializing initial_gs Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16x86: fold pda into percpu area on SMPTejun Heo
[ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16x86: load pointer to pda into %gs while brining up a CPUTejun Heo
[ Based on original patch from Christoph Lameter and Mike Travis. ] CPU startup code in head_64.S loaded address of a zero page into %gs for temporary use till pda is loaded but address to the actual pda is available at the point. Load the real address directly instead. This will help unifying percpu and pda handling later on. This patch is mostly taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 23:12:24 +0000