summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/setup.c
AgeCommit message (Collapse)Author
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-13x86/setup: simplify reserve_crashkernel()Mike Rapoport
* Replace magic numbers with defines * Replace memblock_find_in_range() + memblock_reserve() with memblock_phys_alloc_range() * Stop checking for low memory size in reserve_crashkernel_low(). The allocation from limited range will anyway fail if there is no enough memory, so there is no need for extra traversal of memblock.memory Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13x86/setup: simplify initrd relocation and reservationMike Rapoport
Currently, initrd image is reserved very early during setup and then it might be relocated and re-reserved after the initial physical memory mapping is created. The "late" reservation of memblock verifies that mapped memory size exceeds the size of initrd, then checks whether the relocation required and, if yes, relocates inirtd to a new memory allocated from memblock and frees the old location. The check for memory size is excessive as memblock allocation will anyway fail if there is not enough memory. Besides, there is no point to allocate memory from memblock using memblock_find_in_range() + memblock_reserve() when there exists memblock_phys_alloc_range() with required functionality. Remove the redundant check and simplify memblock allocation. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-14-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-12Merge tag 'core-static_call-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static call support from Ingo Molnar: "This introduces static_call(), which is the idea of static_branch() applied to indirect function calls. Remove a data load (indirection) by modifying the text. They give the flexibility of function pointers, but with better performance. (This is especially important for cases where retpolines would otherwise be used, as retpolines can be pretty slow.) API overview: DECLARE_STATIC_CALL(name, func); DEFINE_STATIC_CALL(name, func); DEFINE_STATIC_CALL_NULL(name, typename); static_call(name)(args...); static_call_cond(name)(args...); static_call_update(name, func); x86 is supported via text patching, otherwise basic indirect calls are used, with function pointers. There's a second variant using inline code patching, inspired by jump-labels, implemented on x86 as well. The new APIs are utilized in the x86 perf code, a heavy user of function pointers, where static calls speed up the PMU handler by 4.2% (!). The generic implementation is not really excercised on other architectures, outside of the trivial test_static_call_init() self-test" * tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) static_call: Fix return type of static_call_init tracepoint: Fix out of sync data passing by static caller tracepoint: Fix overly long tracepoint names x86/perf, static_call: Optimize x86_pmu methods tracepoint: Optimize using static_call() static_call: Allow early init static_call: Add some validation static_call: Handle tail-calls static_call: Add static_call_cond() x86/alternatives: Teach text_poke_bp() to emulate RET static_call: Add simple self-test for static calls x86/static_call: Add inline static call implementation for x86-64 x86/static_call: Add out-of-line static call implementation static_call: Avoid kprobes on inline static_call()s static_call: Add inline static call infrastructure static_call: Add basic static call infrastructure compiler.h: Make __ADDRESSABLE() symbol truly unique jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved() module: Properly propagate MODULE_STATE_COMING failure module: Fix up module_notifier return values ...
2020-10-06dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>Christoph Hellwig
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment describing the contiguous allocator into kernel/dma/contigous.c. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-02x86: Support Generic Initiator only proximity domainsJonathan Cameron
In common with memoryless domains only register GI domains if the proximity node is not online. If a domain is already a memory containing domain, or a memoryless domain there is nothing to do just because it also contains a Generic Initiator. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16efi: Support for MOK variable config tableLenny Szubowicz
Because of system-specific EFI firmware limitations, EFI volatile variables may not be capable of holding the required contents of the Machine Owner Key (MOK) certificate store when the certificate list grows above some size. Therefore, an EFI boot loader may pass the MOK certs via a EFI configuration table created specifically for this purpose to avoid this firmware limitation. An EFI configuration table is a much more primitive mechanism compared to EFI variables and is well suited for one-way passage of static information from a pre-OS environment to the kernel. This patch adds initial kernel support to recognize, parse, and validate the EFI MOK configuration table, where named entries contain the same data that would otherwise be provided in similarly named EFI variables. Additionally, this patch creates a sysfs binary file for each EFI MOK configuration table entry found. These files are read-only to root and are provided for use by user space utilities such as mokutil. A subsequent patch will load MOK certs into the trusted platform key ring using this infrastructure. Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Link: https://lore.kernel.org/r/20200905013107.10457-2-lszubowi@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-01static_call: Allow early initPeter Zijlstra
In order to use static_call() to wire up x86_pmu, we need to initialize earlier, specifically before memory allocation works; copy some of the tricks from jump_label to enable this. Primarily we overload key->next to store a sites pointer when there are no modules, this avoids having to use kmalloc() to initialize the sites and allows us to run much earlier. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20200818135805.220737930@infradead.org
2020-08-10Merge tag 'locking-urgent-2020-08-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-06x86/headers: Remove APIC headers from <asm/smp.h>Ingo Molnar
The APIC headers are relatively complex and bring in additional header dependencies - while smp.h is a relatively simple header included from high level headers. Remove the dependency and add in the missing #include's in .c files where they gained it indirectly before. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-30initrd: remove support for multiple floppiesChristoph Hellwig
Remove the special handling for multiple floppies in the initrd code. No one should be using floppies for booting these days. (famous last words..) Includes a spelling fix from Colin Ian King <colin.king@canonical.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-27x86/setup: Add an initrdmem= option to specify initrd physical addressRonald G. Minnich
Add the initrdmem option: initrdmem=ss[KMG],nn[KMG] which is used to specify the physical address of the initrd, almost always an address in FLASH. Also add code for x86 to use the existing phys_init_start and phys_init_size variables in the kernel. This is useful in cases where a kernel and an initrd is placed in FLASH, but there is no firmware file system structure in the FLASH. One such situation occurs when unused FLASH space on UEFI systems has been reclaimed by, e.g., taking it from the Management Engine. For example, on many systems, the ME is given half the FLASH part; not only is 2.75M of an 8M part unused; but 10.75M of a 16M part is unused. This space can be used to contain an initrd, but need to tell Linux where it is. This space is "raw": due to, e.g., UEFI limitations: it can not be added to UEFI firmware volumes without rebuilding UEFI from source or writing a UEFI device driver. It can be referenced only as a physical address and size. At the same time, if a kernel can be "netbooted" or loaded from GRUB or syslinux, the option of not using the physical address specification should be available. Then, it is easy to boot the kernel and provide an initrd; or boot the the kernel and let it use the initrd in FLASH. In practice, this has proven to be very helpful when integrating Linux into FLASH on x86. Hence, the most flexible and convenient path is to enable the initrdmem command line option in a way that it is the last choice tried. For example, on the DigitalLoggers Atomic Pi, an image into FLASH can be burnt in with a built-in command line which includes: initrdmem=0xff968000,0x200000 which specifies a location and size. [ bp: Massage commit message, make it passive. ] [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Link: http://lkml.kernel.org/r/CAP6exYLK11rhreX=6QPyDQmW7wPHsKNEFtXE47pjx41xS6O7-A@mail.gmail.com Link: https://lkml.kernel.org/r/20200426011021.1cskg0AGd%akpm@linux-foundation.org
2020-04-10mm: hugetlb: optionally allocate gigantic hugepages using cmaRoman Gushchin
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") has added the run-time allocation of gigantic pages. However it actually works only at early stages of the system loading, when the majority of memory is free. After some time the memory gets fragmented by non-movable pages, so the chances to find a contiguous 1GB block are getting close to zero. Even dropping caches manually doesn't help a lot. At large scale rebooting servers in order to allocate gigantic hugepages is quite expensive and complex. At the same time keeping some constant percentage of memory in reserved hugepages even if the workload isn't using it is a big waste: not all workloads can benefit from using 1 GB pages. The following solution can solve the problem: 1) On boot time a dedicated cma area* is reserved. The size is passed as a kernel argument. 2) Run-time allocations of gigantic hugepages are performed using the cma allocator and the dedicated cma area In this case gigantic hugepages can be allocated successfully with a high probability, however the memory isn't completely wasted if nobody is using 1GB hugepages: it can be used for pagecache, anon memory, THPs, etc. * On a multi-node machine a per-node cma area is allocated on each node. Following gigantic hugetlb allocation are using the first available numa node if the mask isn't specified by a user. Usage: 1) configure the kernel to allocate a cma area for hugetlb allocations: pass hugetlb_cma=10G as a kernel argument 2) allocate hugetlb pages as usual, e.g. echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages If the option isn't enabled or the allocation of the cma area failed, the current behavior of the system is preserved. x86 and arm-64 are covered by this patch, other architectures can be trivially added later. The patch contains clean-ups and fixes proposed and implemented by Aslan Bakirov and Randy Dunlap. It also contains ideas and suggestions proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks! Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Aslan Bakirov <aslan@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-19x86/setup: Fix static memory detectionGuenter Roeck
When booting x86 images in qemu, the following warning is seen randomly if DEBUG_LOCKDEP is enabled. WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:1119 lockdep_register_key+0xc0/0x100 static_obj() returns true if an address is between _stext and _end. On x86, this includes the brk memory space. Problem is that this memory block is not static on x86; its unused portions are released after init and can be allocated. This results in the observed warning if a lockdep object is allocated from this memory. Solve the problem by implementing arch_is_kernel_initmem_freed() for x86 and have it return true if an address is within the released memory range. The same problem was solved for s390 with commit 7a5da02de8d6e ("locking/lockdep: check for freed initmem in static_obj()"), which introduced arch_is_kernel_initmem_freed(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200131021159.9178-1-linux@roeck-us.net
2020-01-30Merge tag 'mpx-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx Pull x86 MPX removal from Dave Hansen: "MPX requires recompiling applications, which requires compiler support. Unfortunately, GCC 9.1 is expected to be be released without support for MPX. This means that there was only a relatively small window where folks could have ever used MPX. It failed to gain wide adoption in the industry, and Linux was the only mainstream OS to ever support it widely. Support for the feature may also disappear on future processors. This set completes the process that we started during the 5.4 merge window when the MPX prctl()s were removed. XSAVE support is left in place, which allows MPX-using KVM guests to continue to function" * tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx: x86/mpx: remove MPX from arch/x86 mm: remove arch_bprm_mm_init() hook x86/mpx: remove bounds exception code x86/mpx: remove build infrastructure x86/alternatives: add missing insn.h include
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-28Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Cleanup of the GOP [graphics output] handling code in the EFI stub - Complete refactoring of the mixed mode handling in the x86 EFI stub - Overhaul of the x86 EFI boot/runtime code - Increase robustness for mixed mode code - Add the ability to disable DMA at the root port level in the EFI stub - Get rid of RWX mappings in the EFI memory map and page tables, where possible - Move the support code for the old EFI memory mapping style into its only user, the SGI UV1+ support code. - plus misc fixes, updates, smaller cleanups. ... and due to interactions with the RWX changes, another round of PAT cleanups make a guest appearance via the EFI tree - with no side effects intended" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) efi/x86: Disable instrumentation in the EFI runtime handling code efi/libstub/x86: Fix EFI server boot failure efi/x86: Disallow efi=old_map in mixed mode x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping efi: Fix handling of multiple efi_fake_mem= entries efi: Fix efi_memmap_alloc() leaks efi: Add tracking for dynamically allocated memmaps efi: Add a flags parameter to efi_memory_map efi: Fix comment for efi_mem_type() wrt absent physical addresses efi/arm: Defer probe of PCIe backed efifb on DT systems efi/x86: Limit EFI old memory map to SGI UV machines efi/x86: Avoid RWX mappings for all of DRAM efi/x86: Don't map the entire kernel text RW for mixed mode x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd efi/libstub/x86: Fix unused-variable warning efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode efi/libstub/x86: Use const attribute for efi_is_64bit() efi: Allow disabling PCI busmastering on bridges during boot efi/x86: Allow translating 64-bit arguments for mixed mode calls ...
2020-01-23x86/mpx: remove MPX from arch/x86Dave Hansen
From: Dave Hansen <dave.hansen@linux.intel.com> MPX is being removed from the kernel due to a lack of support in the toolchain going forward (gcc). This removes all the remaining (dead at this point) MPX handling code remaining in the tree. The only remaining code is the XSAVE support for MPX state which is currently needd for KVM to handle VMs which might use MPX. Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: x86@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
2020-01-14arch/x86/setup: Drop dummy_con initializationArvind Sankar
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-24-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10x86/boot: Explicitly include realmode.h to handle RM reservationsSean Christopherson
Explicitly include asm/realmode.h, which provides reserve_real_mode(), instead of picking it up by an indirect include of asm/acpi.h. acpi.h will soon stop including realmode.h so that changing realmode.h doesn't require a full kernel rebuild. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Link: https://lkml.kernel.org/r/20191126165417.22423-3-sean.j.christopherson@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10mm, x86/mm: Untangle address space layout definitions from basic pgtable ↵Ingo Molnar
type definitions - Untangle the somewhat incestous way of how VMALLOC_START is used all across the kernel, but is, on x86, defined deep inside one of the lowest level page table headers. It doesn't help that vmalloc.h only includes a single asm header: #include <asm/page.h> /* pgprot_t */ So there was no existing cross-arch way to decouple address layout definitions from page.h details. I used this: #ifndef VMALLOC_START # include <asm/vmalloc.h> #endif This way every architecture that wants to simplify page.h can do so. - Also on x86 we had a couple of LDT related inline functions that used the late-stage address space layout positions - but these could be uninlined without real trouble - the end result is cleaner this way as well. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10x86/setup: Enhance the commentsIngo Molnar
Update various comments, fix outright mistakes and meaningless descriptions. Also harmonize the style across the file, both in form and in language. Cc: linux-kernel@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10x86/setup: Clean up the header portion of setup.cIngo Molnar
In 20 years we accumulated 89 #include lines in setup.c, but we only need 30 of them (!) ... Get rid of the excessive ones, and while at it, sort the remaining ones alphabetically. Also get rid of the incomplete changelogs at the header of the file, and explain better what this file does. Cc: linux-kernel@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-26Merge tag 'acpi-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20191018, add support for EFI specific purpose memory, update the ACPI EC driver to make it work on systems with hardware-reduced ACPI, improve ACPI-based device enumeration for some platforms, rework the lid blacklist handling in the button driver and add more lid quirks to it, unify ACPI _HID/_UID matching, fix assorted issues and clean up the code and documentation. Specifics: - Update the ACPICA code in the kernel to upstream revision 20191018 including: * Fixes for Clang warnings (Bob Moore) * Fix for possible overflow in get_tick_count() (Bob Moore) * Introduction of acpi_unload_table() (Bob Moore) * Debugger and utilities updates (Erik Schmauss) * Fix for unloading tables loaded via configfs (Nikolaus Voss) - Add support for EFI specific purpose memory to optionally allow either application-exclusive or core-kernel-mm managed access to differentiated memory (Dan Williams) - Fix and clean up processing of the HMAT table (Brice Goglin, Qian Cai, Tao Xu) - Update the ACPI EC driver to make it work on systems with hardware-reduced ACPI (Daniel Drake) - Always build in support for the Generic Event Device (GED) to allow one kernel binary to work both on systems with full hardware ACPI and hardware-reduced ACPI (Arjan van de Ven) - Fix the table unload mechanism to unregister platform devices created when the given table was loaded (Andy Shevchenko) - Rework the lid blacklist handling in the button driver and add more lid quirks to it (Hans de Goede) - Improve ACPI-based device enumeration for some platforms based on Intel BayTrail SoCs (Hans de Goede) - Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and prevent handlers from being registered for unhandled PMIC OpRegions (Hans de Goede) - Unify ACPI _HID/_UID matching (Andy Shevchenko) - Clean up documentation and comments (Cao jin, James Pack, Kacper Piwiński)" * tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) ACPI: OSI: Shoot duplicate word ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory ACPICA: Update version to 20191018 ACPICA: debugger: remove leading whitespaces when converting a string to a buffer ACPICA: acpiexec: initialize all simple types and field units from user input ACPICA: debugger: add field unit support for acpi_db_get_next_token ...
2019-11-26Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...
2019-11-26Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The main changes were: - Extend the boot protocol to allow future extensions without hitting the setup_header size limit. - Add quirk to devicetree systems to disable the RTC unless it's listed as a supported device. - Fix ld.lld linker pedantry" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Introduce setup_indirect x86/boot: Introduce kernel_info.setup_type_max x86/boot: Introduce kernel_info x86/init: Allow DT configured systems to disable RTC at boot time x86/realmode: Explicitly set entry point via ENTRY in linker script
2019-11-18x86: Fix typos in commentsCao jin
BIOSen -> BIOSes; paing -> paging. Append to 640 its proper unit "Kb". encomapssing -> encompassing. [ bp: Merge into a single patch, fix one more typo, massage. ] Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Robert Richter <rrichter@marvell.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191118070012.27850-1-caoj.fnst@cn.fujitsu.com
2019-11-12x86/boot: Introduce setup_indirectDaniel Kiper
The setup_data is a bit awkward to use for extremely large data objects, both because the setup_data header has to be adjacent to the data object and because it has a 32-bit length field. However, it is important that intermediate stages of the boot process have a way to identify which chunks of memory are occupied by kernel data. Thus introduce an uniform way to specify such indirect data as setup_indirect struct and SETUP_INDIRECT type. And finally bump setup_header version in arch/x86/boot/header.S. Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ross Philipson <ross.philipson@oracle.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: ard.biesheuvel@linaro.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: dave.hansen@linux.intel.com Cc: eric.snowberg@oracle.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: kanth.ghatraju@oracle.com Cc: linux-doc@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rdunlap@infradead.org Cc: ross.philipson@oracle.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20191112134640.16035-4-daniel.kiper@oracle.com
2019-11-07x86/efi: Push EFI_MEMMAP check into leaf routinesDan Williams
In preparation for adding another EFI_MEMMAP dependent call that needs to occur before e820__memblock_setup() fixup the existing efi calls to check for EFI_MEMMAP internally. This ends up being cleaner than the alternative of checking EFI_MEMMAP multiple times in setup_arch(). Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-04x86/mm: Report actual image regions in /proc/iomemKees Cook
The resource reservations in /proc/iomem made for the kernel image did not reflect the gaps between text, rodata, and data. Add the "rodata" resource and update the start/end calculations to match the respective calls to free_kernel_image_pages(). Before (booted with "nokaslr" for easier comparison): 00100000-bffd9fff : System RAM 01000000-01e011d0 : Kernel code 01e011d1-025619bf : Kernel data 02a95000-035fffff : Kernel bss After: 00100000-bffd9fff : System RAM 01000000-01e011d0 : Kernel code 02000000-023d4fff : Kernel rodata 02400000-025619ff : Kernel data 02a95000-035fffff : Kernel bss Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Robert Richter <rrichter@marvell.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Will Deacon <will@kernel.org> Cc: x86-ml <x86@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20191029211351.13243-29-keescook@chromium.org
2019-09-03dma-mapping: fix filename referencesAndy Shevchenko
After commit cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma") some of the files are referring to outdated information, i.e. old file names of DMA mapping sources. Fix it here. Note, the lines with "Glue code for..." have been removed completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x865 kdump updates from Thomas Gleixner: "Yet more kexec/kdump updates: - Properly support kexec when AMD's memory encryption (SME) is enabled - Pass reserved e820 ranges to the kexec kernel so both PCI and SME can work" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active x86/kexec: Set the C-bit in the identity map page table when SEV is active x86/kexec: Do not map kexec area as decrypted when SEV is active x86/crash: Add e820 reserved ranges to kdump kernel's e820 table x86/mm: Rework ioremap resource mapping determination x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED x86/mm: Create a workarea in the kernel for SME early encryption x86/mm: Identify the end of the kernel area to be reserved
2019-06-28x86/kdump/64: Restrict kdump kernel reservation to <64TBBaoquan He
Restrict kdump to only reserve crashkernel below 64TB. The reaons is that the kdump may jump from a 5-level paging mode to a 4-level paging mode kernel. If a 4-level paging mode kdump kernel is put above 64TB, then the kdump kernel cannot start. The 1st kernel reserves the kdump kernel region during bootup. At that point it is not known whether the kdump kernel has 5-level or 4-level paging support. To support both restrict the kdump kernel reservation to the lower 64TB address space to ensure that a 4-level paging mode kdump kernel can be loaded and successfully started. [ tglx: Massaged changelog ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: bp@alien8.de Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20190524073810.24298-4-bhe@redhat.com
2019-06-20x86/mm: Identify the end of the kernel area to be reservedThomas Lendacky
The memory occupied by the kernel is reserved using memblock_reserve() in setup_arch(). Currently, the area is from symbols _text to __bss_stop. Everything after __bss_stop must be specifically reserved otherwise it is discarded. This is not clearly documented. Add a new symbol, __end_of_kernel_reserve, that more readily identifies what is reserved, along with comments that indicate what is reserved, what is discarded and what needs to be done to prevent a section from being discarded. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "x86@kernel.org" <x86@kernel.org> Link: https://lkml.kernel.org/r/7db7da45b435f8477f25e66f292631ff766a844c.1560969363.git.thomas.lendacky@amd.com
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kdump update from Ingo Molnar: "This includes two changes: - Raise the crash kernel reservation limit from from ~896MB to ~4GB. Only very old (and already known-broken) kexec-tools is supposed to be affected by this negatively. - Allow higher than 4GB crash kernel allocations when low allocations fail" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kdump: Fall back to reserve high crashkernel memory x86/kdump: Have crashkernel=X reserve under 4G by default
2019-04-22x86/kdump: Fall back to reserve high crashkernel memoryDave Young
crashkernel=xM tries to reserve memory for the crash kernel under 4G, which is enough, usually. But this could fail sometimes, for example when one tries to reserve a big chunk like 2G, for example. So let the crashkernel=xM just fall back to use high memory in case it fails to find a suitable low range. Do not set the ,high as default because it allocates extra low memory for DMA buffers and swiotlb, and this is not always necessary for all machines. Typically, crashkernel=128M usually works with low reservation under 4G, so keep <4G as default. [ bp: Massage. ] Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: linux-doc@vger.kernel.org Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: piliu@redhat.com Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thymo van Beers <thymovanbeers@gmail.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Zhimin Gu <kookoo.gu@intel.com> Link: https://lkml.kernel.org/r/20190422031905.GA8387@dhcp-128-65.nay.redhat.com
2019-04-22x86/kdump: Have crashkernel=X reserve under 4G by defaultDave Young
The kdump crashkernel low reservation is limited to under 896M even for X86_64. This obscure and miserable limitation exists for compatibility with old kexec-tools but the reason is not documented anywhere. Some more tests/investigations about the background: a) Previously, old kexec-tools could only load purgatory to memory under 2G. Eric removed that limitation in 2012 in kexec-tools: b4f9f8599679 ("kexec x86_64: Make purgatory relocatable anywhere in the 64bit address space.") b) Back in 2013 Yinghai removed all the limitations in new kexec-tools, bzImage64 can be loaded anywhere: 82c3dd2280d2 ("kexec, x86_64: Load bzImage64 above 4G") c) Test results with old kexec-tools with old and latest kernels: 1. Old kexec-tools can not build with modern toolchain anymore, I built it in a RHEL6 vm. 2. 2.0.0 kexec-tools does not work with the latest kernel even with memory under 896M and gives an error: "ELF core (kcore) parse failed" For that it needs below kexec-tools fix: ed15ba1b9977 ("build_mem_phdrs(): check if p_paddr is invalid") 3. Even with patched kexec-tools which fixes 2), it still needs some other fixes to work correctly for KASLR-enabled kernels. So the situation is: * Old kexec-tools is already broken with latest kernels. * We can not keep these limitations forever just for compatibility with very old kexec-tools. * If one must use old tools then he/she can choose crashkernel=X@Y. * People have reported bugs where crashkernel=384M failed because KASLR makes the 0-896M space sparse. * Crashkernel can reserve in low or high area, it is natural to understand low as memory under 4G. Hence drop the 896M limitation and change crashkernel low reservation to reserve under 4G by default. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: piliu@redhat.com Cc: Ram Pai <linuxram@us.ibm.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Zhimin Gu <kookoo.gu@intel.com> Link: https://lkml.kernel.org/r/20190421035058.943630505@redhat.com
2019-03-29efi: Unify DMI setup code over the arm/arm64, ia64 and x86 architecturesRobert Richter
All architectures (arm/arm64, ia64 and x86) do the same here, so unify the code. Note: We do not need to call dump_stack_set_arch_desc() in case of !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_ desc_str are initialized zero and thus nothing would change. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-05Merge branch 'mount.part1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API prep from Al Viro: "Mount API prereqs. Mostly that's LSM mount options cleanups. There are several minor fixes in there, but nothing earth-shattering (leaks on failure exits, mostly)" * 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits) mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT smack: rewrite smack_sb_eat_lsm_opts() smack: get rid of match_token() smack: take the guts of smack_parse_opts_str() into a new helper LSM: new method: ->sb_add_mnt_opt() selinux: rewrite selinux_sb_eat_lsm_opts() selinux: regularize Opt_... names a bit selinux: switch away from match_token() selinux: new helper - selinux_add_opt() LSM: bury struct security_mnt_opts smack: switch to private smack_mnt_opts selinux: switch to private struct selinux_mnt_opts LSM: hide struct security_mnt_opts from any generic code selinux: kill selinux_sb_get_mnt_opts() LSM: turn sb_eat_lsm_opts() into a method nfs_remount(): don't leak, don't ignore LSM options quietly btrfs: sanitize security_mnt_opts use selinux; don't open-code a loop in sb_finish_set_opts() LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount() new helper: security_sb_eat_lsm_opts() ...
2018-12-20vfs: Suppress MS_* flag defs within the kernel unless explicitly enabledDavid Howells
Only the mount namespace code that implements mount(2) should be using the MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is included. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: David Howells <dhowells@redhat.com>
2018-11-20x86/boot: Mostly revert commit ae7e1238e68f2a ("Add ACPI RSDP address to ↵Juergen Gross
setup_header") Peter Anvin pointed out that commit: ae7e1238e68f2a ("x86/boot: Add ACPI RSDP address to setup_header") should be reverted as setup_header should only contain items set by the legacy BIOS. So revert said commit. Instead of fully reverting the dependent commit of: e7b66d16fe4172 ("x86/acpi, x86/boot: Take RSDP address for boot params if available") just remove the setup_header reference in order to replace it by a boot_params in a followup patch. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: daniel.kiper@oracle.com Cc: sstabellini@kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181120072529.5489-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-23Merge branch 'x86-grub2-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 grub2 updates from Ingo Molnar: "This extends the x86 boot protocol to include an address for the RSDP table - utilized by Xen currently. Matching Grub2 patches are pending as well. (Juergen Gross)" * 'x86-grub2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acpi, x86/boot: Take RSDP address for boot params if available x86/boot: Add ACPI RSDP address to setup_header x86/xen: Fix boot loader version reported for PVH guests
2018-10-10x86/boot: Add ACPI RSDP address to setup_headerJuergen Gross
Xen PVH guests receive the address of the RSDP table from Xen. In order to support booting a Xen PVH guest via Grub2 using the standard x86 boot entry we need a way for Grub2 to pass the RSDP address to the kernel. For this purpose expand the struct setup_header to hold the physical address of the RSDP address. Being zero means it isn't specified and has to be located the legacy way (searching through low memory or EBDA). While documenting the new setup_header layout and protocol version 2.14 add the missing documentation of protocol version 2.13. There are Grub2 versions in several distros with a downstream patch violating the boot protocol by writing past the end of setup_header. This requires another update of the boot protocol to enable the kernel to distinguish between a specified RSDP address and one filled with garbage by such a broken Grub2. From protocol 2.14 on Grub2 will write the version it is supporting (but never a higher value than found to be supported by the kernel) ored with 0x8000 to the version field of setup_header. This enables the kernel to know up to which field Grub2 has written information to. All fields after that are supposed to be clobbered. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181010061456.22238-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-03x86, hibernate: Fix nosave_regions setup for hibernationZhimin Gu
On 32bit systems, nosave_regions(non RAM areas) located between max_low_pfn and max_pfn are not excluded from hibernation snapshot currently, which may result in a machine check exception when trying to access these unsafe regions during hibernation: [ 612.800453] Disabling lock debugging due to kernel taint [ 612.805786] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: fe00000000801136 [ 612.814344] mce: [Hardware Error]: RIP !INEXACT! 60:<00000000d90be566> {swsusp_save+0x436/0x560} [ 612.823167] mce: [Hardware Error]: TSC 1f5939fe276 ADDR dd000000 MISC 30e0000086 [ 612.830677] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1529487426 SOCKET 0 APIC 0 microcode 24 [ 612.839581] mce: [Hardware Error]: Run the above through 'mcelog --ascii' [ 612.846394] mce: [Hardware Error]: Machine check: Processor context corrupt [ 612.853380] Kernel panic - not syncing: Fatal machine check [ 612.858978] Kernel Offset: 0x18000000 from 0xc1000000 (relocation range: 0xc0000000-0xf7ffdfff) This is because on 32bit systems, pages above max_low_pfn are regarded as high memeory, and accessing unsafe pages might cause expected MCE. On the problematic 32bit system, there are reserved memory above low memory, which triggered the MCE: e820 memory mapping: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d160cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d160d000-0x00000000d1613fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d1614000-0x00000000d1a44fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d1a45000-0x00000000d1ecffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d1ed0000-0x00000000d7eeafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8760000-0x00000000d87fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbb8bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbb8c000-0x00000000dbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041edfffff] usable Fix this problem by changing pfn limit from max_low_pfn to max_pfn. This fix does not impact 64bit system because on 64bit max_low_pfn is the same as max_pfn. Signed-off-by: Zhimin Gu <kookoo.gu@intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-08-14Merge branch 'l1tf-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:56:04 +0000