Age | Commit message (Collapse) | Author |
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for earlyprintk by writing debug messages to the
USB3 debug port. Users can use this type of early printk by
specifying the kernel parameter of "earlyprintk=xdbc". This
gives users a chance of providing debugging output.
The hardware for USB3 debug port requires DMA memory blocks.
This requires to delay setting up debugging hardware and
registering boot console until the memblocks are filled.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/1490083293-3792-4-git-send-email-baolu.lu@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are following warnings on unpatched code:
arch/x86/kernel/early_printk.c:198:32: warning: incorrect type in initializer (different address spaces)
arch/x86/kernel/early_printk.c:198:32: expected void [noderef] <asn:2>*vaddr
arch/x86/kernel/early_printk.c:198:32: got unsigned int [usertype] *<noident>
arch/x86/kernel/early_printk.c:205:32: warning: incorrect type in initializer (different address spaces)
arch/x86/kernel/early_printk.c:205:32: expected void [noderef] <asn:2>*vaddr
arch/x86/kernel/early_printk.c:205:32: got unsigned int [usertype] *<noident>
Annotate it proper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://lkml.kernel.org/r/1444646837-42615-1-git-send-email-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This function compiles to 60 bytes of machine code.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Link: http://lkml.kernel.org/r/1443443037-22077-3-git-send-email-dvlasenk@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
'115200n8'
When I enable early_printk on a kernel, I cut and paste the
console= input and add to earlyprintk parameter. But I notice
recently that ktest has not been detecting triple faults. The
way it detects it, is by seeing the kernel banner "Linux version
.." with a different kernel version pop up. Then I noticed that
early printk was no longer working on my console, which was why
ktest was not seeing it.
I bisected it down and it was added to 4.0 with this commit:
ea9e9d802902 ("Specify PCI based UART for earlyprintk")
because it converted the simple_strtoul() that converts the baud
number into a kstrtoul(). The problem with this is, I had as my
baud rate, 115200n8 (acceptable for console=ttyS0), but because
of the "n8", the kstrtoul() doesn't parse the baud rate and
returns an error, which sets the baud rate to the default 9600.
This explains the garbage on my screen.
Now, earlyprintk= kernel parameter does not say it accepts that
format. Thus, one answer would simply be me changing my kernel
parameters to remove the "n8" since it isn't parsed anyway. But
I wonder if other people run into this, and it seems strange
that the two consoles for serial accepts different input.
I could also extend this to have earlyprintk do something with
that "n8" or whatever it has and have it match the console
parsing (which, BTW, still uses simple_strtoul(), as I guess it
has to).
This patch just makes my old kernel parameter parsing work like
it use to.
Although, simple_strtoull() is considered obsolete, it is the
only standard string parsing function that parses a number that
is attached to text. Ironically, commit ea9e9d802902 also added
several calls to simple_strtoul()!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stuart R. Anderson <stuart.r.anderson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150706101434.5f6a351b@gandalf.local.home
[ Cleaned it up a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here's the big tty/serial driver update for 4.1-rc1.
It was delayed for a bit due to some questions surrounding some of the
console command line parsing changes that are in here. There's still
one tiny regression for people who were previously putting multiple
console command lines and expecting them all to be ignored for some
odd reason, but Peter is working on fixing that. If not, I'll send a
revert for the offending patch, but I have faith that Peter can
address it.
Other than the console work here, there's the usual serial driver
updates and changes, and a buch of 8250 reworks to try to make that
driver easier to maintain over time, and have it support more devices
in the future.
All of these have been in linux-next for a while"
* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
n_gsm: Drop unneeded cast on netdev_priv
sc16is7xx: expose RTS inversion in RS-485 mode
serial: 8250_pci: port failed after wakeup from S3
earlycon: 8250: Document kernel command line options
earlycon: 8250: Fix command line regression
earlycon: Fix __earlycon_table stride
tty: clean up the tty time logic a bit
serial: 8250_dw: only get the clock rate in one place
serial: 8250_dw: remove useless ACPI ID check
dmaengine: hsu: move memory allocation to GFP_NOWAIT
dmaengine: hsu: remove redundant pieces of code
serial: 8250_pci: add Intel Tangier support
dmaengine: hsu: add Intel Tangier PCI ID
serial: 8250_pci: replace switch-case by formula for Intel MID
serial: 8250_pci: replace switch-case by formula
tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
serial: jsm: some off by one bugs
serial: xuartps: Fix check in console_setup().
serial: xuartps: Get rid of register access macros.
serial: xuartps: Fix iobase use.
...
|
|
Two static functions are only used if CONFIG_PCI is defined, so only
build them if this is the case. Fixes the build warnings:
arch/x86/kernel/early_printk.c:98:13: warning: ‘mem32_serial_out’ defined but not used [-Wunused-function]
static void mem32_serial_out(unsigned long addr, int offset, int value)
^
arch/x86/kernel/early_printk.c:105:21: warning: ‘mem32_serial_in’ defined but not used [-Wunused-function]
static unsigned int mem32_serial_in(unsigned long addr, int offset)
^
Also convert a few related instances of uintXX_t to kernel specific uXX
defines.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stuart.r.anderson@intel.com
Link: http://lkml.kernel.org/r/1427923924-22653-1-git-send-email-mark.einon@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since we have a native 8250 driver carrying the Intel MID serial devices the
specific support is not needed anymore. This patch removes it for Intel MID.
Note that the console device name is changed from ttyMFDx to ttySx.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for specifying PCI based UARTs for earlyprintk
using a syntax like "earlyprintk=pciserial,00:18.1,115200",
where 00:18.1 is the BDF of a UART device.
[Slightly tidied from Stuart's original patch]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Moorestown platform support was removed few years ago. This is a follow
up which removes Moorestown specific code for the serial devices. It includes
mrst_max3110 and earlyprintk bits.
This was used on SFI (Medfield, Clovertrail) based platforms as well, though
new ones use normal serial interface for the console service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/intel-mid changes from Ingo Molnar:
"Update the 'intel mid' (mobile internet device) platform code as Intel
is rolling out more SoC designs.
This gets rid of most of the 'MRST' platform code in the process,
mostly by renaming and shuffling code around into their respective
'intel-mid' platform drivers"
* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
intel_mid: Move platform device setups to their own platform_<device>.* files
x86: intel-mid: Add section for sfi device table
intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
intel_mid: Moved SFI related code to sfi.c
intel_mid: Added custom handler for ipc devices
intel_mid: Added custom device_handler support
intel_mid: Refactored sfi_parse_devs() function
intel_mid: Renamed *mrst* to *intel_mid*
pci: intel_mid: Return true/false in function returning bool
intel_mid: Renamed *mrst* to *intel_mid*
mrst: Fixed indentation issues
mrst: Fixed printk/pr_* related issues
|
|
It's incredibly difficult to diagnose early EFI boot issues without
special hardware because earlyprintk=vga doesn't work on EFI systems.
Add support for writing to the EFI framebuffer, via earlyprintk=efi,
which will actually give users a chance of providing debug output.
Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
Following files contains code that is common to all intel mid
soc's. So renamed them as below.
mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c
Also, renamed the corresponding header files and made changes
to the driver files that included these header files.
To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The early console implementations are the same all over the place. Move
the print function to kernel/printk and get rid of the copies.
[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel config: Fix the APB_TIMER selection
x86/mrst: Add additional debug prints for pb_keys
x86/intel config: Revamp configuration to allow for Moorestown and Medfield
x86/intel/scu/ipc: Match the changes in the x86 configuration
x86/apb: Fix configuration constraints
x86: Fix INTEL_MID silly
x86/Kconfig: Cyclone-timer depends on x86-summit
x86: Reduce clock calibration time during slave cpu startup
x86/config: Revamp configuration for MID devices
x86/sfi: Kill the IRQ as id hack
|
|
This follows on from the patch applied in 3.2rc1 which creates
an INTEL_MID configuration. We can now add the entry for
Medfield specific code. After this is merged the final patch
will be submitted which moves the rest of the device Kconfig
dependancies to MRST/MEDFIELD/INTEL_MID as appropriate.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add support to specify which HSU port to use as an early console. This can
be selected by passing "earlyprintk=hsu<n>" on the kernel command line. By
default port 0 is still used.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Move the code to arch/x86/platform/mrst/. Also fix a typo to use
the correct config option: ONFIG_EARLY_PRINTK_MRST
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: alan@linux.intel.com
LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Intel Medfield platform has a high speed UART device, which
could act as a early console. To enable early printk of HSU
console, simply add "earlyprintk=hsu" in kernel command line.
Currently we put the code in the early_printk_mrst.c as it is
also for Intel MID platforms like the mrst early console
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: greg@kroah.com
LKML-Reference: <1284361736-23011-5-git-send-email-feng.tang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Intel Moorestown platform has a spi-uart device(Maxim3110),
which connects to a Designware spi core controller. This patch
will add early console function based on it.
As it will be used long before Linux spi subsystem get
initialised, we simply directly manipulate the spi controller's
register to acheive the early console func. This is safe as it
will be disabled when devices subsytem get initialised.
To use it, user need enable CONFIG_X86_MRST_EARLY_PRINTK in
kenrel config and add "earlyprintk=mrst" in kernel command line.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: greg@kroah.com
LKML-Reference: <1284361736-23011-4-git-send-email-feng.tang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Allow kdb to work properly with with earlyprintk=vga by interpreting
the backspace and carriage return output characters. These
interpretation of these characters is used for simple line editing
provided in the kdb shell.
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
|
|
Commit c953094 ("early_printk: Allow more than one early console")
introduced a regression in the parsing of the earlyprintk= kernel
arguments.
If you specify "earlyprintk=serial,ttyS0,115200" as a kernel
argument, the "serial,ttyS" should be parsed as a single argument
and not as "serial" and then "ttyS".
Also update the documentation to reflect you can specify the ttyS
directly without the "serial" argument.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
LKML-Reference: <4ABB7D5E.6000301@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If you use the kernel argument:
earlyprintk=serial,ttyS0,115200
This will cause a recursive hang printing the same line
again and again:
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Instead warn the end user that they specified the device
a second time, and ignore that second console.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4ABAAB89.1080407@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It is desirable to be able to use one early boot device to debug
another or to have multiple places you can see the early boot
diagnostics, such as the vga screen or serial device.
This patch changes the early_printk console device registration to
allow more than one early printk device to get registered via
register_console().
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Move the dbgp early printk driver in advance of refactoring and adding
new code, so the changes to this code are tracked separately from the
move of the code.
The drivers/usb/early directory will be the location of the current
and future early usb code for driving usb devices prior initializing
the standard interrupt driven USB drivers.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
On one of my systems, several thousand iterations are needed before
CMD_RESET can be observed clear after setting it. Using a much
higher value here obviously cannot hurt.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4AA0E85D02000078000136F9@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup, save memory
Don't keep code resident that's only needed during startup.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B91103.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
arch/x86/kernel/early_printk.c: In function ‘early_dbgp_init’:
arch/x86/kernel/early_printk.c:827: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function)
arch/x86/kernel/early_printk.c:827: error: (Each undeclared identifier is reported only once
arch/x86/kernel/early_printk.c:827: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix compile problem:
CC arch/x86/kernel/early_printk.o
In file included from /home/jeremy/hg/xen/paravirt/linux/arch/x86/kernel/early_printk.c:17:
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pmd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__pfn_to_section'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__section_mem_map_addr'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pud_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pgd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: return makes pointer from integer without a cast
This is a cycling dependency between asm/pgtable.h and linux/mmzone.h
when using CONFIG_SPARSEMEM. Rather than hacking up the headers some
more, remove asm/pgtable.h, since early_printk.c doesn't actually need
it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
|
|
Impact: cleanup
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: remove obsolete code
The later versions of SimNow! actually all have serial console
emulation, so the direct interface isn't needed anymore. So remove
the undocumented simnow earlyprintk console.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
fix warning:
arch/x86/kernel/early_printk.c:993: warning: ‘enable_debug_console’ defined but not used
Eliminate dead code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
arch/x86/kernel/early_printk.c:404:13: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:404:13: expected restricted __le16 [assigned] [usertype] wValue
arch/x86/kernel/early_printk.c:404:13: got int [signed] value
arch/x86/kernel/early_printk.c:405:13: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:405:13: expected restricted __le16 [assigned] [usertype] wIndex
arch/x86/kernel/early_printk.c:405:13: got int [signed] index
arch/x86/kernel/early_printk.c:406:14: warning: incorrect type in assignment (different base types)
arch/x86/kernel/early_printk.c:406:14: expected restricted __le16 [assigned] [usertype] wLength
arch/x86/kernel/early_printk.c:406:14: got int [signed] size
arch/x86/kernel/early_printk.c:845:16: warning: Using plain integer as NULL pointer
arch/x86/kernel/early_printk.c:992:13: warning: symbol 'enable_debug_console' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
based on work from Eric, and add some timeout so don't dead loop when debug
device is not installed
v2: fix checkpatch warning
v3: move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h
also add CONFIG_EARLY_PRINTK_DBGP to disable it by default
v4: address comments from Ingo, seperate ehci reg def moving to another patch
also add auto detect port that connect to debug device for Nvidia
southbridge
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Arjan van de Ven" <arjan@infradead.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Greg KH" <greg@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's not explicitly marked as asmlinkage, but invoked from x86_32
startup code with parameters on stack.
No other architectures define early_printk and none of them are affected
by this change, since defines asmlinkage as empty token.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Depends on:
[PATCH 2/3] x86: coding style fixes to arch/x86/kernel/early_printk.c
Remove two:
ERROR: do not initialise statics to 0 or NULL
paolo@paolo-desktop:/tmp/c$ size *
text data bss dec hex filename
1172 280 12 1464 5b8 early_printk.o.after
1172 280 12 1464 5b8 early_printk.o.before
This patch is changing the binary output:
paolo@paolo-desktop:/tmp/c$ md5sum *
dad9a9a881e0eeda62cc5645bd3d7cad early_printk.o.after
da32f5cd8f248970e4809e1005393e95 early_printk.o.before
because the two variables moved to another section. No
change in functionality.
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Before:
total: 17 errors, 3 warnings, 254 lines checked
After:
total: 2 errors, 3 warnings, 254 lines checked
paolo@paolo-desktop:/tmp/b$ md5sum *
da32f5cd8f248970e4809e1005393e95 early_printk.o.after
da32f5cd8f248970e4809e1005393e95 early_printk.o.before
paolo@paolo-desktop:/tmp/b$ size *
text data bss dec hex filename
1172 280 12 1464 5b8 early_printk.o.after
1172 280 12 1464 5b8 early_printk.o.befor
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Not necessary to expose it, also fixes sparse warning.
arch/x86/kernel/early_printk.c:196:16: warning: symbol 'early_console' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Instead of using magic macros for boot_params access, simply use the
boot_params structure.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|