summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic_32.c
AgeCommit message (Collapse)Author
2008-06-10x86: introduce max_physical_apicid for bigsmp switchingYinghai Lu
a multi-socket test-system with 3 or 4 ioapics, when 4 dualcore cpus or 2 quadcore cpus installed, needs to switch to bigsmp or physflat. CPU apic id is [4,11] instead of [0,7], and we need to check max apic id instead of cpu numbers. also add check for 32 bit when acpi is not compiled in or acpi=off. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: move smp_found_configAlexey Starikovskiy
2008-05-25x86: move pic_mode to apic_32.cAlexey Starikovskiy
2008-05-25x86: make struct config_ioapic not MPspec specificAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: cleanup div_sc() usageAkinobu Mita
Remove the magic number in the third argment of div_sc(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-24"make namespacecheck" fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move up & smp variables to setup.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: change GET_APIC_ID() from an inline function to an out-of-line functionJack Steiner
Introduce a function to read the local APIC_ID. This change is in preparation for additional changes to the APICID functions that will come in a later patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move generic_processor_info to apic_32.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move x86_bios_cpu_apicid to apic_32.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move boot_cpu_physical_apicid to apic_32.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move mp_lapic_addr to apic_32.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move apic_ver array to apic_32.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: provide an end_local_APIC_setup functionGlauber de Oliveira Costa
It splits setup_local_APIC in two, providing a function corresponding to the ending part of it. As a side effect, smp_callin looks the same between i386 and x86_64. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: wrap esr setting up in i386 in lapic_setup_esrGlauber de Oliveira Costa
it is a little bit more complicated than x86_64 due to erratas and other stuff, but its existance will ease integration Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: move smp_intr_init away from smpboot_32.cGlauber de Oliveira Costa
We move it to apic_32.c, since it's irq related anyway, and only called from that file. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: apic: extended interrupt LVT support for AMDRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't disable the APIC if it hasn't been mapped yetAndi Kleen
When the kernel panics early for some unrelated reason there would be eventually an early exception inside panic because clear_local_APIC tried to disable the not yet mapped APIC. Check for that explicitely. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: preset apic clockevents multiplicatorThomas Gleixner
The check for an unitialized clock event device triggers, when the local apic timer is registered as a dummy clock event device for broadcasting. Preset the multiplicator to avoid a false positive. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: sanity check APIC timer frequencyThomas Gleixner
Check the APIC timer calibration result for sanity. When the frequency is out of range, issue a warning and disable the local APIC timer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: clean up apic_32.c, take 2Hiroshi Shimamoto
More white space and coding style clean up. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up apic_32/64.cHiroshi Shimamoto
White space and coding style clean up. Make apic_32/64.c similar. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30arch/x86/: spelling fixesJoe Perches
Spelling fixes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: adjust enable_NMI_through_LVT0()Jan Beulich
Its previous use in a call to on_each_cpu() was pointless, as at the time that code gets executed only one CPU is online. Further, the function can be __cpuinit, and for this to work without CONFIG_HOTPLUG_CPU setup_nmi() must also get an attribute (this one can even be __init; on 64-bits check_timer() also was lacking that attribute). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove all definitions with fastcallHarvey Harrison
fastcall is always defined to be empty, remove it from arch/x86 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add set/clear_cpu_cap operationsJeremy Fitzhardinge
The patch to suppress bitops-related warnings added a pile of ugly casts. Many of these were related to the management of x86 CPU capabilities. Clean these up by adding specific set/clear_cpu_cap macros, and use them consistently. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: move 8259 defines to i8259.hThomas Gleixner
Move the i8259 defines and remove the now io_ports.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: prepare merging arch/x86/kernel/apic_32/64.cThomas Gleixner
Shuffle code around, so we get a readable diff. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: use u32 for some lapic functionsThomas Gleixner
Use u32 so 32 and 64bit have the same interface. Andrew Morton: xen, lguest build fixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-24Driver core: change sysdev classes to use dynamic kobject namesKay Sievers
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-19x86 apic_32.c section fixAdrian Bunk
CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x2390d): Section mismatch: reference to .init.text.5:setup_local_APIC (between 'start_secondary' and 'check_tsc_warp') Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26x86: fix APIC related bootup crash on Athlon XP CPUsIngo Molnar
warmbloodedcreature@gmail.com reported that an APIC-enabled Asus a7v8x-x with an Athlon XP reboots early in the bootup: http://bugzilla.kernel.org/show_bug.cgi?id=8723 after a long marathon of spontaneous-reboot debugging, it turns out to be caused by sync_Arb_ids(). AMD CPUs never really needed this sequence anyway, so just return early if we meet an AMD CPU. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-20spelling fixes: arch/i386/Simon Arlott
Spelling fixes in arch/i386/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-17x86: expand /proc/interrupts to include missing vectors, v2Joe Korty
Add missing IRQs and IRQ descriptions to /proc/interrupts. /proc/interrupts is most useful when it displays every IRQ vector in use by the system, not just those somebody thought would be interesting. This patch inserts the following vector displays to the i386 and x86_64 platforms, as appropriate: rescheduling interrupts TLB flush interrupts function call interrupts thermal event interrupts threshold interrupts spurious interrupts A threshold interrupt occurs when ECC memory correction is occuring at too high a frequency. Thresholds are used by the ECC hardware as occasional ECC failures are part of normal operation, but long sequences of ECC failures usually indicate a memory chip that is about to fail. Thermal event interrupts occur when a temperature threshold has been exceeded for some CPU chip. IIRC, a thermal interrupt is also generated when the temperature drops back to a normal level. A spurious interrupt is an interrupt that was raised then lowered by the device before it could be fully processed by the APIC. Hence the apic sees the interrupt but does not know what device it came from. For this case the APIC hardware will assume a vector of 0xff. Rescheduling, call, and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics would be used to discover if an interrupt flood of the given type has been occuring. AK: merged v2 and v4 which had some more tweaks AK: replace Local interrupts with Local timer interrupts AK: Fixed description of interrupt types. [ tglx: arch/x86 adaptation ] [ mingo: small cleanup ] Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11i386: move kernelThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 14:54:38 +0000