| Age | Commit message (Collapse) | Author |
|---|
|
Fixes: 09c0f03bf8ce ("crypto: x86/des3_ede - convert to skcipher interface")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are no users of the original glue_fpu_begin() anymore, so rename
glue_skwalk_fpu_begin() to glue_fpu_begin() so that it matches
glue_fpu_end() again.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all glue_helper users have been switched from the blkcipher
interface over to the skcipher interface, remove the versions of the
glue_helper functions that handled the blkcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that all users of lrw_crypt() have been removed in favor of the LRW
template wrapping an ECB mode algorithm, remove lrw_crypt(). Also
remove crypto/lrw.h as that is no longer needed either; and fold
'struct lrw_table_ctx' into 'struct priv', lrw_init_table() into
setkey(), and lrw_free_table() into exit_tfm().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AESNI AVX and AESNI AVX2 implementations of Camellia from
the (deprecated) ablkcipher and blkcipher interfaces over to the
skcipher interface. Note that this includes replacing the use of
ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the x86 asm implementation of Camellia from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().
Remove the xts-camellia-asm algorithm which did this. Users who request
xts(camellia) and previously would have gotten xts-camellia-asm will now
get xts(ecb-camellia-asm) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-camellia-asm algorithm which did this. Users who request
lrw(camellia) and previously would have gotten lrw-camellia-asm will now
get lrw(ecb-camellia-asm) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-camellia-aesni-avx2 algorithm which did this. Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni-avx2 will now get lrw(ecb-camellia-aesni-avx2)
instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-camellia-aesni algorithm which did this. Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni will now get lrw(ecb-camellia-aesni) instead, which
is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the x86 asm implementation of Triple DES from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the x86 asm implementation of Blowfish from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AVX implementation of CAST6 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface. Note that this
includes replacing the use of ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-cast6-avx algorithm which did this. Users who request
lrw(cast6) and previously would have gotten lrw-cast6-avx will now get
lrw(ecb-cast6-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AVX implementation of CAST5 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface. Note that this
includes replacing the use of ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
With ecb-cast5-avx, if a 128+ byte scatterlist element followed a
shorter one, then the algorithm accidentally encrypted/decrypted only 8
bytes instead of the expected 128 bytes. Fix it by setting the
encryption/decryption 'fn' correctly.
Fixes: c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AVX implementation of Twofish from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-twofish-avx algorithm which did this. Users who request
lrw(twofish) and previously would have gotten lrw-twofish-avx will now
get lrw(ecb-twofish-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the 3-way implementation of Twofish from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().
Remove the xts-twofish-3way algorithm which did this. Users who request
xts(twofish) and previously would have gotten xts-twofish-3way will now
get xts(ecb-twofish-3way) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-twofish-3way algorithm which did this. Users who request
lrw(twofish) and previously would have gotten lrw-twofish-3way will now
get lrw(ecb-twofish-3way) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the AVX and AVX2 implementations of Serpent from the
(deprecated) ablkcipher and blkcipher interfaces over to the skcipher
interface. Note that this includes replacing the use of ablk_helper
with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-serpent-avx algorithm which did this. Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx will now
get lrw(ecb-serpent-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-serpent-avx2 algorithm which did this. Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx2 will now
get lrw(ecb-serpent-avx2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the SSE2 implementation of Serpent from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().
Remove the xts-serpent-sse2 algorithm which did this. Users who request
xts(serpent) and previously would have gotten xts-serpent-sse2 will now
get xts(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly. Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().
Remove the lrw-serpent-sse2 algorithm which did this. Users who request
lrw(serpent) and previously would have gotten lrw-serpent-sse2 will now
get lrw(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add ECB, CBC, and CTR functions to glue_helper which use skcipher_walk
rather than blkcipher_walk. This will allow converting the remaining
x86 algorithms from the blkcipher interface over to the skcipher
interface, after which we'll be able to remove the blkcipher_walk
versions of these functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add gcmaes_crypt_by_sg routine, that will do scatter/gather
by sg. Either src or dst may contain multiple buffers, so
iterate over both at the same time if they are different.
If the input is the same as the output, iterate only over one.
Currently both the AAD and TAG must be linear, so copy them out
with scatterlist_map_and_copy. If first buffer contains the
entire AAD, we can optimize and not copy. Since the AAD
can be any size, if copied it must be on the heap. TAG can
be on the stack since it is always < 16 bytes.
Only the SSE routines are updated so far, so leave the previous
gcmaes_en/decrypt routines, and branch to the sg ones if the
keysize is inappropriate for avx, or we are SSE only.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The asm macros are all set up now, introduce entry points.
GCM_INIT and GCM_COMPLETE have arguments supplied, so that
the new scatter/gather entry points don't have to take all the
arguments, and only the ones they need.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We can fast-path any < 16 byte read if the full message is > 16 bytes,
and shift over by the appropriate amount. Usually we are
reading > 16 bytes, so this should be faster than the READ_PARTIAL
macro introduced in b20209c91e2 for the average case.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before this diff, multiple calls to GCM_ENC_DEC will
succeed, but only if all calls are a multiple of 16 bytes.
Handle partial blocks at the start of GCM_ENC_DEC, and update
aadhash as appropriate.
The data offset %r11 is also updated after the partial block.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
HashKey computation only needs to happen once per scatter/gather operation,
save it between calls in gcm_context struct instead of on the stack.
Since the asm no longer stores anything on the stack, we can use
%rsp directly, and clean up the frame save/restore macros a bit.
Hashkeys actually only need to be calculated once per key and could
be moved to when set_key is called, however, the current glue code
falls back to generic aes code if fpu is disabled.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Prepare to handle partial blocks between scatter/gather calls.
For the last partial block, we only want to calculate the aadhash
in GCM_COMPLETE, and a new partial block macro will handle both
aadhash update and encrypting partial blocks between calls.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fill in aadhash, aadlen, pblocklen, curcount with appropriate values.
pblocklen, aadhash, and pblockenckey are also updated at the end
of each scatter/gather operation, to be carried over to the next
operation.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AAD hash only needs to be calculated once for each scatter/gather operation.
Move it to its own macro, and call it from GCM_INIT instead of
INITIAL_BLOCKS.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Introduce a gcm_context_data struct that will be used to pass
context data between scatter/gather update calls. It is passed
as the second argument (after crypto keys), other args are
renumbered.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make a macro for the main encode/decode routine. Only a small handful
of lines differ for enc and dec. This will also become the main
scatter/gather update routine.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge encode and decode tag calculations in GCM_COMPLETE macro.
Scatter/gather routines will call this once at the end of encryption
or decryption.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reduce code duplication by introducting GCM_INIT macro. This macro
will also be exposed as a function for implementing scatter/gather
support, since INIT only needs to be called once for the full
operation.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Macro-ify function save and restore. These will be used in new functions
added for scatter/gather update operations.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use macro operations to merge implemetations of INITIAL_BLOCKS,
since they differ by only a small handful of lines.
Use macro counter \@ to simplify implementation.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The HASH_FIRST flag is never set. Remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The HASH_FIRST flag is never set. Remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The HASH_FIRST flag is never set. Remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- oversize stack frames on mn10300 in sha3-generic
- warning on old compilers in sha3-generic
- API error in sun4i_ss_prng
- potential dead-lock in sun4i_ss_prng
- null-pointer dereference in sha512-mb
- endless loop when DECO acquire fails in caam
- kernel oops when hashing empty message in talitos"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate
crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate
crypto: caam - fix endless loop when DECO acquire fails
crypto: sha3-generic - Use __optimize to support old compilers
compiler-gcc.h: __nostackprotector needs gcc-4.4 and up
compiler-gcc.h: Introduce __optimize function attribute
crypto: sha3-generic - deal with oversize stack frames
crypto: talitos - fix Kernel Oops on hashing an empty file
crypto: sha512-mb - initialize pending lengths correctly
|
|
The SHA-512 multibuffer code keeps track of the number of blocks pending
in each lane. The minimum of these values is used to identify the next
lane that will be completed. Unused lanes are set to a large number
(0xFFFFFFFF) so that they don't affect this calculation.
However, it was forgotten to set the lengths to this value in the
initial state, where all lanes are unused. As a result it was possible
for sha512_mb_mgr_get_comp_job_avx2() to select an unused lane, causing
a NULL pointer dereference. Specifically this could happen in the case
where ->update() was passed fewer than SHA512_BLOCK_SIZE bytes of data,
so it then called sha_complete_job() without having actually submitted
any blocks to the multi-buffer code. This hit a NULL pointer
dereference if another task happened to have submitted blocks
concurrently to the same CPU and the flush timer had not yet expired.
Fix this by initializing sha512_mb_mgr->lens correctly.
As usual, this bug was found by syzkaller.
Fixes: 45691e2d9b18 ("crypto: sha512-mb - submit/flush routines for AVX2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Enforce the setting of keys for keyed aead/hash/skcipher
algorithms.
- Add multibuf speed tests in tcrypt.
Algorithms:
- Improve performance of sha3-generic.
- Add native sha512 support on arm64.
- Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
- Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
- Add cryptd_max_cpu_qlen module parameter to cryptd.
Drivers:
- Add support for EIP97 engine in inside-secure.
- Add inline IPsec support to chelsio.
- Add RevB core support to crypto4xx.
- Fix AEAD ICV check in crypto4xx.
- Add stm32 crypto driver.
- Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
- Add Derived Key Protocol (DKP) support in caam.
- Add Samsung Exynos True RNG driver.
- Add support for Exynos5250+ SoCs in exynos PRNG driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
crypto: picoxcell - Fix error handling in spacc_probe()
crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
crypto: testmgr - add new testcases for sha3
crypto: sha3-generic - export init/update/final routines
crypto: sha3-generic - simplify code
crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
crypto: sha3-generic - fixes for alignment and big endian operation
crypto: aesni - handle zero length dst buffer
crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
crypto: axis - remove unnecessary platform_get_resource() error check
crypto: testmgr - test misuse of result in ahash
crypto: inside-secure - make function safexcel_try_push_requests static
crypto: aes-generic - fix aes-generic regression on powerpc
crypto: chelsio - Fix indentation warning
crypto: arm64/sha1-ce - get rid of literal pool
crypto: arm64/sha2-ce - move the round constant table to .rodata section
...
|
|
GCM can be invoked with a zero destination buffer. This is possible if
the AAD and the ciphertext have zero lengths and only the tag exists in
the source buffer (i.e. a source buffer cannot be zero). In this case,
the GCM cipher only performs the authentication and no decryption
operation.
When the destination buffer has zero length, it is possible that no page
is mapped to the SG pointing to the destination. In this case,
sg_page(req->dst) is an invalid access. Therefore, page accesses should
only be allowed if the req->dst->length is non-zero which is the
indicator that a page must exist.
This fixes a crash that can be triggered by user space via AF_ALG.
CC: <stable@vger.kernel.org>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
"This contains:
- a PTI bugfix to avoid setting reserved CR3 bits when PCID is
disabled. This seems to cause issues on a virtual machine at least
and is incorrect according to the AMD manual.
- a PTI bugfix which disables the perf BTS facility if PTI is
enabled. The BTS AUX buffer is not globally visible and causes the
CPU to fault when the mapping disappears on switching CR3 to user
space. A full fix which restores BTS on PTI is non trivial and will
be worked on.
- PTI bugfixes for EFI and trusted boot which make sure that the user
space visible page table entries have the NX bit cleared
- removal of dead code in the PTI pagetable setup functions
- add PTI documentation
- add a selftest for vsyscall to verify that the kernel actually
implements what it advertises.
- a sysfs interface to expose vulnerability and mitigation
information so there is a coherent way for users to retrieve the
status.
- the initial spectre_v2 mitigations, aka retpoline:
+ The necessary ASM thunk and compiler support
+ The ASM variants of retpoline and the conversion of affected ASM
code
+ Make LFENCE serializing on AMD so it can be used as speculation
trap
+ The RSB fill after vmexit
- initial objtool support for retpoline
As I said in the status mail this is the most of the set of patches
which should go into 4.15 except two straight forward patches still on
hold:
- the retpoline add on of LFENCE which waits for ACKs
- the RSB fill after context switch
Both should be ready to go early next week and with that we'll have
covered the major holes of spectre_v2 and go back to normality"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
x86,perf: Disable intel_bts when PTI
security/Kconfig: Correct the Documentation reference for PTI
x86/pti: Fix !PCID and sanitize defines
selftests/x86: Add test_vsyscall
x86/retpoline: Fill return stack buffer on vmexit
x86/retpoline/irq32: Convert assembler indirect jumps
x86/retpoline/checksum32: Convert assembler indirect jumps
x86/retpoline/xen: Convert Xen hypercall indirect jumps
x86/retpoline/hyperv: Convert assembler indirect jumps
x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
x86/retpoline/entry: Convert entry assembler indirect jumps
x86/retpoline/crypto: Convert crypto assembler indirect jumps
x86/spectre: Add boot time option to select Spectre v2 mitigation
x86/retpoline: Add initial retpoline support
objtool: Allow alternatives to be ignored
objtool: Detect jumps to retpoline thunks
x86/pti: Make unpoison of pgd for trusted boot work for real
x86/alternatives: Fix optimize_nops() checking
sysfs/cpu: Fix typos in vulnerability documentation
x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
...
|
