summaryrefslogtreecommitdiff
path: root/arch/x86/boot
AgeCommit message (Collapse)Author
2009-03-28x86, setup: mark %esi as clobbered in E820 BIOS callMichael K. Johnson
Jordan Hargrave diagnosed a BIOS clobbering %esi in the E820 call. That particular BIOS has been fixed, but there is a possibility that this is responsible for other occasional reports of early boot failure, and it does not hurt to add %esi to the clobbers. -stable candidate patch. Cc: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Michael K Johnson <johnsonm@rpath.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org
2009-03-18x86, setup: fix the setting of 480-line VGA modesH. Peter Anvin
Impact: fix rarely-used feature The VGA Miscellaneous Output Register is read from address 0x3CC but written to address 0x3C2. This was missed when this code was converted from assembly to C. While we're at it, clean up the code by making the overflow bits and the math used to set the bits explicit. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-03-17x86, setup: move 32-bit code to .text32H. Peter Anvin
Impact: cleanup The setup code is mostly 16-bit code, but there is a small stub of 32-bit code at the end. Move the 32-bit code to a separate segment, .text32, to avoid scrambling the disassembly. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-03-12x86: use targets in the boot Makefile instead of CLEAN_FILESH. Peter Anvin
Impact: cleanup Instead of using CLEAN_FILES in arch/x86/Makefile, add generated files to targets in arch/x86/boot/Makefile, so they will get naturally cleaned up by "make clean". Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-12x86: remove additional vestiges of the zImage/bzImage splitH. Peter Anvin
Impact: cleanup Remove targets that were used for zImage only, and Makefile infrastructure that was there to support the zImage/bzImage split. Reported-by: Paul Bolle <pebolle@tiscali.nl> LKML-Reference: <1236879901.24144.26.camel@test.thuisdomein> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-11x86: remove zImage supportH. Peter Anvin
Impact: obsolete feature removal The zImage kernel format has been functionally unused for a very long time. It is just barely possible to build a modern kernel that still fits within the zImage size limit, but it is highly unlikely that anyone ever uses it. Furthermore, although it is still supported by most bootloaders, it has been at best poorly tested (or not tested at all); some bootloaders are even known to not support zImage at all and not having even noticed. Also remove some really obsolete constants that no longer have any meaning. LKML-Reference: <49B703D4.1000008@zytor.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-04Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', ↵Ingo Molnar
'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core
2009-02-24Merge branches 'x86/acpi', 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/mm', ↵Ingo Molnar
'x86/signal' and 'x86/urgent'; commit 'v2.6.29-rc6' into x86/core
2009-02-23x86: remove the Voyager 32-bit subarchIngo Molnar
Impact: remove unused/broken code The Voyager subarch last built successfully on the v2.6.26 kernel and has been stale since then and does not build on the v2.6.27, v2.6.28 and v2.6.29-rc5 kernels. No actual users beyond the maintainer reported this breakage. Patches were sent and most of the fixes were accepted but the discussion around how to do a few remaining issues cleanly fizzled out with no resolution and the code remained broken. In the v2.6.30 x86 tree development cycle 32-bit subarch support has been reworked and removed - and the Voyager code, beyond the build problems already known, needs serious and significant changes and probably a rewrite to support it. CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has been notified but no patches have been sent so far to fix it. While all other subarchs have been converted to the new scheme, voyager is still broken. We'd prefer to receive patches which clean up the current situation in a constructive way, but even in case of removal there is no obstacle to add that support back after the issues have been sorted out in a mutually acceptable fashion. So remove this inactive code for now. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20Merge branches 'x86/asm', 'x86/cleanups' and 'x86/headers' into x86/coreIngo Molnar
2009-02-19x86: compressed head_32 - use ENTRY,ENDPROC macrosCyrill Gorcunov
Impact: clenaup Linker script will put startup_32 at predefined address so using startup_32 will not bloat the code size. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19x86: compressed head_64 - use ENTRY,ENDPROC macrosCyrill Gorcunov
Impact: clenaup Linker script will put startup_32 at predefined address so using ENTRY will not bloat the code size. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19x86: pmjump - use GLOBAL,ENDPROC macrosCyrill Gorcunov
Impact: cleanup We are in setup stage so we use GLOBAL instead of ENTRY and do not increase code size. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19x86: copy.S - use GLOBAL,ENDPROC macrosCyrill Gorcunov
Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13x86: use _types.h headers in asm where availableJeremy Fitzhardinge
In general, the only definitions that assembly files can use are in _types.S headers (where available), so convert them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-02x86 setup: a20: early timeout for a nonexistent keyboard controllerH. Peter Anvin
When probing the keyboard controller to enable A20, if we get FF back (which is *possible* as a valid status word, but is extremely unlikely) then bail after much fewer iterations than we otherwise would, and abort the attempt to access the KBC. This hopefully should make it work a lot better for embedded platforms which don't have a KBC and where the BIOS doesn't implement INT 15h AX=2401h (and doesn't boot with A20 already enabled.) If this works, it will be the one remaining use of CONFIG_X86_ELAN as anything other than a processor type optimization option. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-01-30x86 setup: fix asm constraints in vesa_store_edidAndreas Schwab
Impact: fix potential miscompile (currently believed non-manifest) As the comment explains, the VBE DDC call can clobber any register. Tell the compiler about that fact. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-27x86 setup: fix asm constraints in vesa_store_edidAndreas Schwab
Impact: fix potential miscompile (currently believed non-manifest) As the comment explains, the VBE DDC call can clobber any register. Tell the compiler about that fact. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-01-04bzip2/lzma: x86 kernel compression supportAlain Knaff
Impact: Replaces x86 kernel decompressor with new code This is the third part of the bzip2/lzma patch The bzip patch is based on an idea by Christian Ludwig, includes support for compressing the kernel with bzip2 or lzma rather than gzip. Both compressors give smaller sizes than gzip. Lzma's decompresses faster than bzip2. It also supports ramdisks and initramfs' compressed using these two compressors. The functionality has been successfully used for a couple of years by the udpcast project This version applies to "tip" kernel 2.6.28 This part contains: - support for new bzip2 and lzma kernel compression for x86 Signed-off-by: Alain Knaff <alain@knaff.lu> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-23Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', ↵Ingo Molnar
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core
2008-11-25x86: use limited register constraint for setnzSteven Rostedt
Impact: build fix with certain compilers GCC can decide to use %dil when "r" is used, which is not valid for setnz. This bug was brought out by Stephen Rothwell's merging of the branch tracer into linux-next. [ Thanks to Uros Bizjak for recommending 'q' over 'Q' ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23x86: boot - fix sparse warningsHannes Eder
Impact: make global variables static Fix these sparse warnings: arch/x86/boot/video.c:233:3: warning: symbol 'saved' was not declared. Should it be static? arch/x86/boot/video-vga.c:37:13: warning: symbol 'video_vga' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30.gitignore updatesAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix section mismatch warning - apic_x2apic_phys x86: fix section mismatch warning - apic_x2apic_cluster x86: fix section mismatch warning - apic_x2apic_uv_x x86: fix section mismatch warning - apic_physflat x86: fix section mismatch warning - apic_flat x86: memtest fix use of reserve_early() x86 syscall.h: fix argument order x86/tlb_uv: remove strange mc146818rtc include x86: remove redundant KERN_DEBUG on pr_debug x86: do_boot_cpu - check if we have ESR register x86: MAINTAINERS change for AMD microcode patch loader x86/proc: fix /proc/cpuinfo cpu offline bug x86: call dmi-quirks for HP Laptops after early-quirks are executed x86, kexec: fix hang on i386 when panic occurs while console_sem is held MCE: Don't run 32bit machine checks with interrupts on x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: make variables static
2008-10-22x86: Fix ASM_X86__ header guardsH. Peter Anvin
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86: make variables staticroel kluin
These variables are only used in their source files, so make them static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16fbdev: ignore VESA modes if framebuffer does not support themMichal Januszewski
Currently, it is possible to set a graphics VESA mode at boot time via the vga= parameter even when no framebuffer driver supporting this is configured. This could lead to the system booting with a black screen, without a usable console. Fix this problem by only allowing to set graphics modes at boot time if a supporting framebuffer driver is configured. Signed-off-by: Michal Januszewski <spock@gentoo.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-12Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', ↵Ingo Molnar
'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2
2008-10-11Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-DIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c arch/x86/kernel/signal_64.c include/asm-x86/cpufeature.h
2008-10-06Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', ↵Ingo Molnar
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1
2008-10-06Merge branch 'x86/header-guards' into x86-v28-for-linus-phase1Ingo Molnar
Conflicts: include/asm-x86/dma-mapping.h include/asm-x86/gpio.h include/asm-x86/idle.h include/asm-x86/kvm_host.h include/asm-x86/namei.h include/asm-x86/uaccess.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-05x86: replace a magic number with a named constant in the VESA boot codeMichal Januszewski
Replace a magic number with a named constant in the VESA boot code. Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04x86 setup: remove IMAGE_OFFSETPaul Bolle
After commit 968de4f ("i386: Relocatable kernel support") IMAGE_OFFSET wasn't actually used anymore in the (current) X86 build system. Now remove its last traces. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-03x86 setup: correct segfault in generation of 32-bit reloc kernelH. Peter Anvin
Impact: segfault on build of a 32-bit relocatable kernel When converting arch/x86/boot/compressed/relocs.c to support unlimited sections, the computation of sym_strtab in walk_relocs() was done incorrectly. This causes a segfault for some people when building the relocatable 32-bit kernel. Pointed out by Anonymous <pageexec@freemail.hu>. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-03Merge commit 'v2.6.27-rc8' into x86/setupIngo Molnar
2008-10-03Revert "x86: fix ghost EDD devices in /sys again"H. Peter Anvin
This reverts commit 464f04c9e9b3b1c4f5ffb89c51d8ba2a2034c846. Obsoleted by commit 6cdcdb99cf7c2e1835fc5b471864d21161c3e679. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-03x86 setup: fix ghost entries under /sys/firmware/edd take 3Andrey Borzenkov
Some BIOSes do not indicate error when trying to read from non- existing device. Zero buffer before reading and check that we possibly have valid MBR by looking for MBR magic. This was fixed in different way for edd.S in http://marc.info/?l=linux-kernel&m=114087765422490&w=2, but lost again when edd.S was rewritten in C. Signed-off-by: Andrey Borzenkov < arvidjaar@mail.ru> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-19Merge commit 'v2.6.27-rc6' into x86/cleanupsIngo Molnar
2008-09-16x86 setup: handle more than 8 CPU flag wordsH. Peter Anvin
Checkin e38e05a85828dac23540cd007df5f20985388afc added a 9th CPU flag word, but didn't adjust the boot code to match. This patch adds the necessary boot code support. Note: due to a typo in an #if statement, it didn't trigger the #error this was supposed to do. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-16x86 setup: drop SWAP_DEVPaul Bolle
Impact: None (cleanup) SWAP_DEV is unused since 2.6.23-rc1. The comment was already incorrect since (at least) 2.6.12. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-06x86: fix ghost EDD devices in /sys againAndrey Borzenkov
> This is regression but old enough. Apparently I had for whatever reasons > EDD turned off till recently. This is 2.6.27-rc5 just in case. > > In 2006 I fixed ghost devices due to buggy BIOS: > > http://marc.info/?l=linux-kernel&m=114087765422490&w=2 > > Later edd.S has been rewritten in C, and apparently this patch has been > lost: > > {pts/1}% ls /sys/firmware/edd > int13_dev80/ int13_dev84/ int13_dev88/ int13_dev8c/ > int13_dev81/ int13_dev85/ int13_dev89/ int13_dev8d/ > int13_dev82/ int13_dev86/ int13_dev8a/ int13_dev8e/ > int13_dev83/ int13_dev87/ int13_dev8b/ int13_dev8f/ > > But I have just a single disk. This is the same system BTW. Some BIOSes do not always set CF on error before return from int13. The patch adds additional check for status being zero (AH == 0). This was fixed for edd.S in http://marc.info/?l=linux-kernel&m=114087765422490&w=2, but lost again when edd.S was rewritten in C. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05x86: when building image.iso, use isohybrid if it existsH. Peter Anvin
When building image.iso (make isoimage), use the isohybrid tool if it exists. isohybrid is a script included with Syslinux 3.72 and higher, which creates an image that can be booted either as a hard disk (including removable, e.g. USB disk) or as a CD-ROM. If isohybrid doesn't exist, then this has no effect. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05x86: boot: stub out unimplemented CPU feature wordsH. Peter Anvin
The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-04Merge branch 'x86/cpu' into x86/coreH. Peter Anvin
Conflicts: arch/x86/kernel/cpu/feature_names.c include/asm-x86/cpufeature.h
2008-09-04x86: boot/compressed/Makefile: fix "make clean"H. Peter Anvin
The Kbuild variable "targets" is supposed to be configuration-independent and reflect "all possible targets". This is required to make "make clean" work properly. Therefore, move all manipulation of "targets" as well as custom rules out of the x86-32 ifdef statement. Only leave inside the ifdefs the things that are genuinely configuration-dependent. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-27x86: generate names for /proc/cpuinfo from <asm/cpufeature.h>H. Peter Anvin
We have had a number of cases where <asm/cpufeature.h> (and its predecessors) have diverged substantially from the names list in /proc/cpuinfo. This patch generates the latter from the former. It retains the option for explicitly overriding the strings, but by making that require a separate action it should at least be less likely to happen. It would be good to do a future pass and rename strings that are gratuituously different in the kernel (/proc/cpuinfo is a userspace interface and must remain constant.) Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-27Merge branch 'x86/urgent' into x86/cpuH. Peter Anvin
Conflicts: arch/x86/kernel/cpu/cyrix.c
2008-08-20Merge branch 'linus' into x86/cleanupsIngo Molnar
2008-08-18x86: boot: stub out unimplemented CPU feature wordsH. Peter Anvin
The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-18x86: fix build warnings in real mode codeAndi Kleen
This recent patch commit c3965bd15118742d72b4bc1a290d37b3f081eb98 Author: Paul Jackson <pj@sgi.com> Date: Wed May 14 08:15:34 2008 -0700 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant caused these new warnings during a normal build: In file included from linux-2.6/arch/x86/boot/memory.c:17: linux-2.6/include/linux/log2.h: In function '__ilog2_u32': linux-2.6/include/linux/log2.h:34: warning: implicit declaration of function 'fls' linux-2.6/include/linux/log2.h: In function '__ilog2_u64': linux-2.6/include/linux/log2.h:42: warning: implicit declaration of function 'fls64' linux-2.6/include/linux/log2.h: In function '__roundup_pow_of_two ': linux-2.6/include/linux/log2.h:63: warning: implicit declaration of function 'fls_long' I tried to fix them in log2.h, but it's difficult because the real mode environment is completely different from a normal kernel environment. Instead define an own ARRAY_SIZE macro in boot.h, similar to the other private macros there. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>