summaryrefslogtreecommitdiff
path: root/arch/sparc/kernel
AgeCommit message (Collapse)Author
2018-10-31sparc64: Wire up compat getpeername and getsockname.David S. Miller
Fixes: 8b30ca73b7cc ("sparc: Add all necessary direct socket system calls.") Reported-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29sparc64: Remvoe set_fs() from perf_callchain_user().David S. Miller
Ever since commit 88b0193d9418 ("perf/callchain: Force USER_DS when invoking perf_callchain_user()") the caller does this for us. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26sparc64: Make corrupted user stacks more debuggable.David Miller
Right now if we get a corrupted user stack frame we do a do_exit(SIGILL) which is not helpful. If under a debugger, this behavior causes the inferior process to exit. So the register and other state cannot be examined at the time of the event. Instead, conditionally log a rate limited kernel log message and then force a SIGSEGV. With bits and ideas borrowed (as usual) from powerpc. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22sparc: Improve VDSO instruction patching.David S. Miller
The current VDSO patch mechanism has several problems: 1) It assumes how gcc will emit a function, with a register window, an initial save instruction and then immediately the %tick read when compiling vread_tick(). There is no such guarantees, code generation could change at any time, gcc could put a nop between the save and the %tick read, etc. So this is extremely fragile and would fail some day. 2) It disallows us to properly inline vread_tick() into the callers and thus get the best possible code sequences. So fix this to patch properly, with location based annotations. We have to be careful because we cannot do it the way we do patches elsewhere in the kernel. Those use a sequence like: 1: insn .section .whatever_patch, "ax" .word 1b replacement_insn .previous This is a dynamic shared object, so that .word cannot be resolved at build time, and thus cannot be used to execute the patches when the kernel initializes the images. Even trying to use label difference equations doesn't work in the above kind of scheme: 1: insn .section .whatever_patch, "ax" .word . - 1b replacement_insn .previous The assembler complains that it cannot resolve that computation. The issue is that this is contained in an executable section. Borrow the sequence used by x86 alternatives, which is: 1: insn .pushsection .whatever_patch, "a" .word . - 1b, . - 1f .popsection .pushsection .whatever_patch_replacements, "ax" 1: replacement_insn .previous This works, allows us to inline vread_tick() as much as we like, and can be used for arbitrary kinds of VDSO patching in the future. Also, reverse the condition for patching. Most systems are %stick based, so if we only patch on %tick systems the patching code will get little or no testing. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15Revert "sparc: Convert to using %pOFn instead of device_node.name"David S. Miller
This reverts commit 0b9871a3a8cc7234c285b5d9bf66cc6712cfee7c. Causes crashes with qemu, interacts badly with commit commit 6d0a70a284be ("vsprintf: print OF node name using full_name") etc. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-14sparc64: Set %l4 properly on trap return after handling signals.David S. Miller
If we did some signal processing, we have to reload the pt_regs tstate register because it's value may have changed. In doing so we also have to extract the %pil value contained in there anre load that into %l4. This value is at bit 20 and thus needs to be shifted down before we later write it into the %pil register. Most of the time this is harmless as we are returning to userspace and the %pil is zero for that case. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12sparc: Throttle perf events properly.David S. Miller
Like x86 and arm, call perf_sample_event_took() in perf event NMI interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12sparc: Fix single-pcr perf event counter management.David S. Miller
It is important to clear the hw->state value for non-stopped events when they are added into the PMU. Otherwise when the event is scheduled out, we won't read the counter because HES_UPTODATE is still set. This breaks 'perf stat' and similar use cases, causing all the events to show zero. This worked for multi-pcr because we make explicit sparc_pmu_start() calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do this because the idea there is to accumulate all of the counter settings into the single pcr value. So we have to add explicit hw->state handling there. Like x86, we use the PERF_HES_ARCH bit to track truly stopped events so that we don't accidently start them on a reload. Related to all of this, sparc_pmu_start() is missing a userpage update so add it. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09sparc: Wire up io_pgetevents system call.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07sparc64: fix fall-through annotationGustavo A. R. Silva
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07sparc32: fix fall-through annotationGustavo A. R. Silva
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07sparc64: viohs: Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this allocates a fixed size array for the maximum number of cookies and adds a runtime sanity check. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1 RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07sparc: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02sparc: set a default 32-bit dma mask for OF devicesChristoph Hellwig
This keeps the historic default behavior for devices without a DMA mask, but removes the warning about a lacking DMA mask for doing DMA without a mask. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Guenter Roeck <linux@roeck-us.net>
2018-08-24Merge branch 'userns-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This is a set of four fairly obvious bug fixes: - a switch from d_find_alias to d_find_any_alias because the xattr code perversely takes a dentry - two mutex vs copy_to_user fixes from Jann Horn - a fix to use a sanitized size not the size userspace passed in from Christian Brauner" * 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: getxattr: use correct xattr length sys: don't hold uts_sem while accessing userspace memory userns: move user access out of the mutex cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()
2018-08-21sparc: use generic dma_noncoherent_opsChristoph Hellwig
Switch to the generic noncoherent direct mapping implementation. This removes the previous sync_single_for_device implementation, which looks bogus given that no syncing is happening in the similar but more important map_single case. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf update from Thomas Gleixner: "The perf crowd presents: Kernel updates: - Removal of jprobes - Cleanup and consolidatation the handling of kprobes - Cleanup and consolidation of hardware breakpoints - The usual pile of fixes and updates to PMUs and event descriptors Tooling updates: - Updates and improvements all over the place. Nothing outstanding, just the (good) boring incremental grump work" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) perf trace: Do not require --no-syscalls to suppress strace like output perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h perf tools: Allow overriding MAX_NR_CPUS at compile time perf bpf: Show better message when failing to load an object perf list: Unify metric group description format with PMU event description perf vendor events arm64: Update ThunderX2 implementation defined pmu core events perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet perf cs-etm: Fix start tracing packet handling perf build: Fix installation directory for eBPF perf c2c report: Fix crash for empty browser perf tests: Fix indexing when invoking subtests perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg perf trace beauty: Do not print NULL strarray entries perf beauty: Add a generator for IPPROTO_ socket's protocol constants tools include uapi: Grab a copy of linux/in.h perf tests: Fix complex event name parsing perf evlist: Fix error out while applying initial delay and LBR ...
2018-08-11sys: don't hold uts_sem while accessing userspace memoryJann Horn
Holding uts_sem as a writer while accessing userspace memory allows a namespace admin to stall all processes that attempt to take uts_sem. Instead, move data through stack buffers and don't access userspace memory while uts_sem is held. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-07-30sparc/time: Add missing __init to init_tick_ops()Steven Rostedt (VMware)
Code that was added to force gcc not to inline any function that isn't explicitly declared as inline uncovered that init_tick_ops() isn't marked as "__init". It is only called by __init functions and more importantly it too calls an __init function which would require it to be __init as well. Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobeMasami Hiramatsu
Clear current_kprobe and enable preemption in kprobe even if pre_handler returns !0. This simplifies function override using kprobes. Jprobe used to require to keep the preemption disabled and keep current_kprobe until it returned to original function entry. For this reason kprobe_int3_handler() and similar arch dependent kprobe handers checks pre_handler result and exit without enabling preemption if the result is !0. After removing the jprobe, Kprobes does not need to keep preempt disabled even if user handler returns !0 anymore. But since the function override handler in error-inject and bpf is also returns !0 if it overrides a function, to balancing the preempt count, it enables preemption and reset current kprobe by itself. That is a bad design that is very buggy. This fixes such unbalanced preempt-count and current_kprobes setting in kprobes, bpf and error-inject. Note: for powerpc and x86, this removes all preempt_disable from kprobe_ftrace_handler because ftrace callbacks are called under preempt disabled. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <jhogan@kernel.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21sparc64/kprobes: Don't call the ->break_handler() in sparc64 kprobes codeMasami Hiramatsu
Don't call the ->break_handler() from the sparc64 kprobes code, because it was only used by jprobes which got removed. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-arch@vger.kernel.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942491684.15209.8114703769135529984.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21sparc64/kprobes: Remove jprobe implementationMasami Hiramatsu
Remove arch dependent setjump/longjump functions and unused fields in kprobe_ctlblk for jprobes from arch/sparc. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-arch@vger.kernel.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942459795.15209.9736720668494241853.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-04Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "This set of changes close the known issues with setting si_code to an invalid value, and with not fully initializing struct siginfo. There remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64 and x86 to get the code that generates siginfo into a simpler and more maintainable state. Most of that work involves refactoring the signal handling code and thus careful code review. Also not included is the work to shrink the in kernel version of struct siginfo. That depends on getting the number of places that directly manipulate struct siginfo under control, as it requires the introduction of struct kernel_siginfo for the in kernel things. Overall this set of changes looks like it is making good progress, and with a little luck I will be wrapping up the siginfo work next development cycle" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) signal/sh: Stop gcc warning about an impossible case in do_divide_error signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions signal/um: More carefully relay signals in relay_signal. signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code signal/signalfd: Add support for SIGSYS signal/signalfd: Remove __put_user from signalfd_copyinfo signal/xtensa: Use force_sig_fault where appropriate signal/xtensa: Consistenly use SIGBUS in do_unaligned_user signal/um: Use force_sig_fault where appropriate signal/sparc: Use force_sig_fault where appropriate signal/sparc: Use send_sig_fault where appropriate signal/sh: Use force_sig_fault where appropriate signal/s390: Use force_sig_fault where appropriate signal/riscv: Replace do_trap_siginfo with force_sig_fault signal/riscv: Use force_sig_fault where appropriate signal/parisc: Use force_sig_fault where appropriate signal/parisc: Use force_sig_mceerr where appropriate signal/openrisc: Use force_sig_fault where appropriate signal/nios2: Use force_sig_fault where appropriate ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-22sparc/PCI: Use dev_printk() when possibleBjorn Helgaas
Use the pci_info() and pci_err() wrappers for dev_printk() when possible. Log PCI device vendor and device IDs and BAR information in the same format used by other architectures. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-21sparc32/PCI/PCIC: Converge device enable pathBjorn Helgaas
Most architectures turn on PCI_COMMAND_IO and PCI_COMMAND_MEMORY in pci_enable_device() when a driver claims the device. Sparc PCIC did it in pcibios_fixup_bus(), which is called during enumeration, before any drivers are attached. Implement pcibios_enable_device() for PCIC so it will do the same as other architectures. This implementation is copied verbatim from sparc64. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-21sparc32/PCI/LEON: Converge device enable pathBjorn Helgaas
Most architectures turn on PCI_COMMAND_IO and PCI_COMMAND_MEMORY in pci_enable_device() when a driver claims the device. Sparc LEON did it in pcibios_fixup_bus(), which is called during enumeration, before any drivers are attached. Implement pcibios_enable_device() for LEON so it will do the same as other architectures. This implementation is copied verbatim from sparc64. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-09iommu-common: move to arch/sparcChristoph Hellwig
This code is only used by sparc, and all new iommu drivers should use the drivers/iommu/ framework. Also remove the unused exports. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-08dma-debug: move initialization to common codeChristoph Hellwig
Most mainstream architectures are using 65536 entries, so lets stick to that. If someone is really desperate to override it that can still be done through <asm/dma-mapping.h>, but I'd rather see a really good rationale for that. dma_debug_init is now called as a core_initcall, which for many architectures means much earlier, and provides dma-debug functionality earlier in the boot process. This should be safe as it only relies on the memory allocator already being available. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
- Fixup license text for oradax driver, from Rob Gardner. - Release device object with put_device() instead of straight kfree(), from Arvind Yadav. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: vio: use put_device() instead of kfree() sparc64: Fix mistake in oradax license text
2018-04-30sparc: vio: use put_device() instead of kfree()Arvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error. Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25signal/sparc: Use force_sig_fault where appropriateEric W. Biederman
Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: David Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal/sparc: Use send_sig_fault where appropriateEric W. Biederman
Filling in struct siginfo before calling send_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper send_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls send_sig_info. In short about a 5 line reduction in code for every time send_sig_info is called, which makes the calling function clearer. Cc: David Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-19sparc: fix compat siginfo ABI regressionDmitry V. Levin
Starting with commit v4.14-rc1~60^2^2~1, a SIGFPE signal sent via kill results to wrong values in si_pid and si_uid fields of compat siginfo_t. This happens due to FPE_FIXME being defined to 0 for sparc, and at the same time siginfo_layout() introduced by the same commit returns SIL_FAULT for SIGFPE if si_code == SI_USER and FPE_FIXME is defined to 0. Fix this regression by removing FPE_FIXME macro and changing all its users to assign FPE_FLTUNK to si_code instead of FPE_FIXME. Note that FPE_FLTUNK is a new macro introduced by commit 266da65e9156d93e1126e185259a4aae68188d0e. Tested with commit v4.16-11958-g16e205cf42da. This bug was found by strace test suite. In the discussion about FPE_FLTUNK on sparc David Miller said: > Eric, feel free to do something similar on Sparc. Link: https://github.com/strace/strace/issues/21 Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic") Fixes: 2.3.41 Cc: David Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Conceptually-Acked-By: David Miller <davem@davemloft.net> Thanks-to: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-04-16sparc/PCI: Request legacy VGA framebuffer only for VGA devicesBjorn Helgaas
Previously we unconditionally requested the legacy VGA framebuffer (bus address 0xa0000-0xbffff) before we even know what PCI devices are present, in these paths: pci_fire_pbm_init, schizo_pbm_init, pci_sun4v_pbm_init, psycho_pbm_init_common pci_determine_mem_io_space pci_register_legacy_regions p->start = mem_res->start + 0xa0000 request_resource(mem_res, p) # claim VGA framebuffer pci_scan_one_pbm pci_of_scan_bus # scan DT for PCI devices pci_claim_bus_resources # claim PCI device BARs If we found a PCI device with a BAR or bridge window that overlapped the framebuffer area, we complained about not being able to claim the BAR, e.g., pci 0000:00:01.0: can't claim BAR 8 [mem 0x1ff00000000-0x1ffbfffffff]: address conflict with Video RAM area [??? 0x1ff000a0000-0x1ff000bffff flags 0x80000000] pci 0000:02:01.0: can't claim BAR 8 [mem 0x1ff00100000-0x1ff028fffff]: no compatible bridge window pci 0000:03:0f.0: can't claim BAR 8 [mem 0x1ff00100000-0x1ff028fffff]: no compatible bridge window pci 0000:04:04.0: can't claim BAR 1 [mem 0x1ff02808000-0x1ff02808fff]: no compatible bridge window This may make the conflicting device unusable because we try not to enable devices that have unassigned or conflicting BARs, e.g., qla1280 0000:04:04.0: can't ioremap BAR 1: [mem size 0x00001000] qla1280: Unable to map I/O memory If there is no VGA device in the same PCI segment, there's no reason to reserve the framebuffer and there's no conflict. If there *is* a VGA device in the same segment, both the VGA device and the device with an overlapping BAR may respond to the framebuffer addresses, which may cause bus errors. Request the legacy framebuffer area only when we actually find a VGA device. The fact that VGA devices use the legacy framebuffer even though it's not reported in a BAR is not sparc-specific, so the reservation of that area could be made more generic in the PCI core eventually. Note that on some systems, e.g., Blade 100, we still report a conflict between an ISA bridge (00:07.0) and a VGA device (00:13.0): pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff]) pci 0000:00:07.0: reg 0x14: [mem 0x1ff00000000-0x1ff000fffff] pci 0000:00:13.0: can't claim VGA legacy [mem 0x1ff000a0000-0x1ff000bffff]: address conflict with 0000:00:07.0 [mem 0x1ff00000000-0x1ff000fffff] This is probably harmless, but if the VGA device and something behind the ISA bridge both responded to reads of the framebuffer, it would cause a bus error. Link: https://lkml.kernel.org/r/alpine.LRH.2.21.1804112323170.25495@math.ut.ee Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117191#c35 Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-11exec: pass stack rlimit into mm layout functionsKees Cook
Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-07Merge branch 'misc.sparc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sparc syscall cleanups from Al Viro: "sparc syscall stuff - killing pointless wrappers, conversions to {COMPAT_,}SYSCALL_DEFINE" * 'misc.sparc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sparc: get rid of asm wrapper for nis_syscall() sparc: switch compat {f,}truncate64() to COMPAT_SYSCALL_DEFINE sparc: switch compat pread64 and pwrite64 to COMPAT_SYSCALL_DEFINE convert compat sync_file_range() to COMPAT_SYSCALL_DEFINE switch sparc_remap_file_pages() to SYSCALL_DEFINE sparc: get rid of memory_ordering(2) wrapper sparc: trivial conversions to {COMPAT_,}SYSCALL_DEFINE() sparc: bury a zombie extern that had been that way for twenty years sparc: get rid of remaining SIGN... wrappers sparc: kill useless SIGN... wrappers sparc: get rid of sys_sparc_pipe() wrappers
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm: fix races between swapoff and flush dcacheHuang Ying
Thanks to commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"), after swapoff the address_space associated with the swap device will be freed. So page_mapping() users which may touch the address_space need some kind of mechanism to prevent the address_space from being freed during accessing. The dcache flushing functions (flush_dcache_page(), etc) in architecture specific code may access the address_space of swap device for anonymous pages in swap cache via page_mapping() function. But in some cases there are no mechanisms to prevent the swap device from being swapoff, for example, CPU1 CPU2 __get_user_pages() swapoff() flush_dcache_page() mapping = page_mapping() ... exit_swap_address_space() ... kvfree(spaces) mapping_mapped(mapping) The address space may be accessed after being freed. But from cachetlb.txt and Russell King, flush_dcache_page() only care about file cache pages, for anonymous pages, flush_anon_page() should be used. The implementation of flush_dcache_page() in all architectures follows this too. They will check whether page_mapping() is NULL and whether mapping_mapped() is true to determine whether to flush the dcache immediately. And they will use interval tree (mapping->i_mmap) to find all user space mappings. While mapping_mapped() and mapping->i_mmap isn't used by anonymous pages in swap cache at all. So, to fix the race between swapoff and flush dcache, __page_mapping() is add to return the address_space for file cache pages and NULL otherwise. All page_mapping() invoking in flush dcache functions are replaced with page_mapping_file(). [akpm@linux-foundation.org: simplify page_mapping_file(), per Mike] Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds
Pull sparc updates from David Miller: 1) Add support for ADI (Application Data Integrity) found in more recent sparc64 cpus. Essentially this is keyed based access to virtual memory, and if the key encoded in the virual address is wrong you get a trap. The mm changes were reviewed by Andrew Morton and others. Work by Khalid Aziz. 2) Validate DAX completion index range properly, from Rob Gardner. 3) Add proper Kconfig deps for DAX driver. From Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Make atomic_xchg() an inline function rather than a macro. sparc64: Properly range check DAX completion index sparc: Make auxiliary vectors for ADI available on 32-bit as well sparc64: Oracle DAX driver depends on SPARC64 sparc64: Update signal delivery to use new helper functions sparc64: Add support for ADI (Application Data Integrity) mm: Allow arch code to override copy_highpage() mm: Clear arch specific VM flags on protection change mm: Add address parameter to arch_validate_prot() sparc64: Add auxiliary vectors to report platform ADI properties sparc64: Add handler for "Memory Corruption Detected" trap sparc64: Add HV fault type handlers for ADI related faults sparc64: Add support for ADI register fields, ASIs and traps mm, swap: Add infrastructure for saving page metadata on swap signals, sparc: Add signal codes for ADI violations
2018-04-02Merge branch 'syscalls-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull removal of in-kernel calls to syscalls from Dominik Brodowski: "System calls are interaction points between userspace and the kernel. Therefore, system call functions such as sys_xyzzy() or compat_sys_xyzzy() should only be called from userspace via the syscall table, but not from elsewhere in the kernel. At least on 64-bit x86, it will likely be a hard requirement from v4.17 onwards to not call system call functions in the kernel: It is better to use use a different calling convention for system calls there, where struct pt_regs is decoded on-the-fly in a syscall wrapper which then hands processing over to the actual syscall function. This means that only those parameters which are actually needed for a specific syscall are passed on during syscall entry, instead of filling in six CPU registers with random user space content all the time (which may cause serious trouble down the call chain). Those x86-specific patches will be pushed through the x86 tree in the near future. Moreover, rules on how data may be accessed may differ between kernel data and user data. This is another reason why calling sys_xyzzy() is generally a bad idea, and -- at most -- acceptable in arch-specific code. This patchset removes all in-kernel calls to syscall functions in the kernel with the exception of arch/. On top of this, it cleans up the three places where many syscalls are referenced or prototyped, namely kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h" * 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits) bpf: whitelist all syscalls for error injection kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions kernel/sys_ni: sort cond_syscall() entries syscalls/x86: auto-create compat_sys_*() prototypes syscalls: sort syscall prototypes in include/linux/compat.h net: remove compat_sys_*() prototypes from net/compat.h syscalls: sort syscall prototypes in include/linux/syscalls.h kexec: move sys_kexec_load() prototype to syscalls.h x86/sigreturn: use SYSCALL_DEFINE0 x86: fix sys_sigreturn() return type to be long, not unsigned long x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm() mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead() mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff() mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64() fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate() fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate() fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid() kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare() ...
2018-04-02Merge tag 'nds32-for-linus-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 architecture support from Greentime Hu: "This contains the core nds32 Linux port (including interrupt controller driver and timer driver), which has been through seven rounds of review on mailing list. It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX platform: Total Tests: 1901 Total Skipped Tests: 618 Total Failures: 78" Reviewed-by: Arnd Bergmann <arnd@arndb.de> * tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: (44 commits) nds32: To use the generic dump_stack() nds32: fix building failed if using elf toolchain. nios2: add ioremap_nocache declaration before include asm-generic/io.h. nds32: fix building failed if using older version gcc. dt-bindings: timer: Add andestech atcpit100 timer binding doc clocksource/drivers/atcpit100: VDSO support clocksource/drivers/atcpit100: Add andestech atcpit100 timer net: faraday add nds32 support. irqchip: Andestech Internal Vector Interrupt Controller driver dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller dt-bindings: nds32 SoC Bindings dt-bindings: nds32 L2 cache controller Bindings dt-bindings: nds32 CPU Bindings MAINTAINERS: Add nds32 nds32: Build infrastructure nds32: defconfig nds32: Miscellaneous header files nds32: Device tree support nds32: Generic timers support nds32: Loadable modules ...
2018-04-02mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()Dominik Brodowski
Using this helper allows us to avoid the in-kernel calls to the sys_readahead() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_readahead(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()Dominik Brodowski
Using this helper allows us to avoid the in-kernel calls to the sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mmap_pgoff(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 04:48:57 +0000