summaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2008-05-19sh: Fix up restorer in debug_trap exception return path.Paul Mundt
There are a few different types of debug trap exceptions, though now that they are all going through a special jump table, the restorer needs to be unified as well. Presently this is falling through the ret_from_fork path, which more or less does the right thing on SH-3/4 whilst being completely unsuitable on MMU-less targets. Ultimately what we want here is a branch through the platform's restore_all directly, without worrying about the retval being clobbered. We can accomplish that through a branch to __restore_all directly, so switch it so we come back from the jump table and branch to the restorer. This fixes up a recursion in the nommu WARN_ON() path, as well as some other userspace nastiness where said recursion caused serious stack corruption. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-19sh: Make is_valid_bugaddr() more intelligent on nommu.Paul Mundt
Currently is_valid_bugaddr() is true for anything >= PAGE_OFFSET, which happens to be 0 on nommu configurations. Make this a bit smarter by just reading in the opcode and comparing it against the trap type that we already know. Follows the logic from avr32. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: fix sh7785 master clock valueYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: Fix up thread info pointer in syscall_badsys resume path.Hideo Saito
Entry to resume_userspace expects r8 to contain current_thread_info, which happens in all paths except for syscall_badsys, where r8 was being inadvertently trampled. Reload it before the branch. Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: Fix up optimized SH-4 memcpy on big endian.Hideo Saito
Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: disable initrd defaults in .empty_zero_page.Paul Mundt
When using initramfs on systems that don't explicitly clear LOADER_TYPE, unpack_to_rootfs() tramples tramples the range with the defaults taken out of .empty_zero_page. This causes kernels with valid initramfs images to bail out with crc or gzip magic mismatch errors after the second unpack takes place on certain platform configurations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: display boot params by default on entry.Paul Mundt
Some kernel and boot loader configurations tweak the .empty_zero_page settings, while others do not. Print the values out on entry as a debugging aid. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-14lib: create common ascii hex arrayHarvey Harrison
Add a common hex array in hexdump.c so everyone can use it. Add a common hi/lo helper to avoid the shifting masking that is done to get the upper and lower nibbles of a byte value. Pull the pack_hex_byte helper from kgdb as it is opencoded many places in the tree that will be consolidated. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-09SH: catch negative denormal_subf1() retval in denormal_add()Roel Kluin
'ix' is unsigned but denormal_subf1() may return a negative int. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-09sh: update smc91x platform data for se7206.Paul Mundt
Follows the se7722 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: intc register modify fixMagnus Damm
Make sure register modifications stay atomic. Fixes processors with shared priority register masking. Dual bitmap masking is unaffected. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: no high level trigger on some sh3 cpusMagnus Damm
The processor models sh7706, sh7707 and sh7709 don't support high level trigger sense configuration. And the intc code looks like crap these days so what's the difference. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: clean up sh7710 and sh7720 intc tablesMagnus Damm
Clean up the intc tables by removing unneeded #ifdefs. The vector list is what selects which interrupt sources that should be added, having unsupported bitfields listed is ok as long as the vector is excluded from the list. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add interrupt ack code to sh3Magnus Damm
This patch adds interrupt acknowledge code for external interrupt sources on sh3 processors. Only really required for edge triggered interrupts, but we ack regardless of sense configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: unify external irq pin code for sh3Magnus Damm
This patch unifies the sh3 external irq pin code. It buys us some savings with reduced code redundancy, but the main feature with this change is irq sense selection support for all sh3 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: reset hardware from early printkMagnus Damm
Reset the transmitter and receiver when setting up early printk. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: drain and wait for early printkMagnus Damm
Drain by waiting for all characters to be sent, and make sure to wait a little bit after setting up the baud rate. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: use sci_out() for early printkMagnus Damm
Use sci_out() instead of ctrl_outw() for early printk setup code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add memory resources to /proc/iomemMagnus Damm
Add physical memory resources such as System RAM, Kernel code/data/bss and reserved crash dump area to /proc/iomem. Same strategy as on x86. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add kernel bss resourceMagnus Damm
Do like everyone else and have a struct resource for kernel bss. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: fix sh7705 interrupt vector typoMagnus Damm
Fix sh7705 interrupt sources for vectors 0xc80 and 0xca0. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: update smc91x platform data for se7722Magnus Damm
Select smc91x bus width using platform data for se7722 now when the smc91x header file is in place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: update smc91x platform data for MigoRMagnus Damm
Select smc91x bus width and irg flags using platform data for MigoR now when the smc91x header file is in place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove -traditional.Mathieu Desnoyers
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Sam Ravnborg <sam@ravnborg.org> CC: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: r7780rp: Kill off unneded ifdefs for irq setup.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: rts7751r2d: Kill off unneeded ifdefs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: intc_sh5 depends on cayman board for IRQ priority table.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: export onchip_remap/unmap() too.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Some symbol exports to make the allmodconfig happier.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove the broken SH_MPC1211 supportAdrian Bunk
SH_MPC1211 has been marked as BROKEN for some time. Unless someone is working on reviving it now, I'd therefore suggest this patch to remove it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Setup I/D-TLB defaults in SH-5 probe path.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: kexec and kdump depend on SUPERH32.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Fix up compile warning in event tracer.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Fixup the nommu build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: fixups for xtime_lock seqlock conversion.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: sh-bios depends on SUPERH32.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-03unified (weak) sys_pipe implementationUlrich Drepper
This replaces the duplicated arch-specific versions of "sys_pipe()" with one unified implementation. This removes almost 250 lines of duplicated code. It's marked __weak, so that *if* an architecture wants to override the default implementation it can do so by simply having its own replacement version, since many architectures use alternate calling conventions for the 'pipe()' system call for legacy reasons (ie traditional UNIX implementations often return the two file descriptors in registers) I still haven't changed the cris version even though Linus says the BKL isn't needed. The arch maintainer can easily do it if there are really no obstacles. Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29i2c: Convert most new-style drivers to use module aliasingJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29sh: use kbuild.h instead of defining macros in asm-offsets.cChristoph Lameter
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proper __do_softirq() prototypeAdrian Bunk
Add a proper prototype for __do_softirq() in include/linux/interrupt.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29iomap: fix 64 bits resources on 32 bitsBenjamin Herrenschmidt
Almost all implementations of pci_iomap() in the kernel, including the generic lib/iomap.c one, copies the content of a struct resource into unsigned long's which will break on 32 bits platforms with 64 bits resources. This fixes all definitions of pci_iomap() to use resource_size_t. I also "fixed" the 64bits arch for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28hotplug-memory: make online_page() commonJeremy Fitzhardinge
All architectures use an effectively identical definition of online_page(), so just make it common code. x86-64, ia64, powerpc and sh are actually identical; x86-32 is slightly different. x86-32's differences arise because it puts its hotplug pages in the highmem zone. We can handle this in the generic code by inspecting the page to see if its in highmem, and update the totalhigh_pages count appropriately. This leaves init_32.c:free_new_highpage with a single caller, so I folded it into add_one_highpage_init. I also removed an incorrect comment referring to the NUMA case; any NUMA details have already been dealt with by the time online_page() is called. [akpm@linux-foundation.org: fix indenting] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: KAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com> Tested-by: KAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Christoph Lameter <clameter@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
2008-04-20PCI: remove initial bios sort of PCI devices on x86Greg Kroah-Hartman
We currently keep 2 lists of PCI devices in the system, one in the driver core, and one all on its own. This second list is sorted at boot time, in "BIOS" order, to try to remain compatible with older kernels (2.2 and earlier days). There was also a "nosort" option to turn this sorting off, to remain compatible with even older kernel versions, but that just ends up being what we have been doing from 2.5 days... Unfortunately, the second list of devices is not really ever used to determine the probing order of PCI devices or drivers[1]. That is done using the driver core list instead. This change happened back in the early 2.5 days. Relying on BIOS ording for the binding of drivers to specific device names is problematic for many reasons, and userspace tools like udev exist to properly name devices in a persistant manner if that is needed, no reliance on the BIOS is needed. Matt Domsch and others at Dell noticed this back in 2006, and added a boot option to sort the PCI device lists (both of them) in a breadth-first manner to help remain compatible with the 2.4 order, if needed for any reason. This option is not going away, as some systems rely on them. This patch removes the sorting of the internal PCI device list in "BIOS" mode, as it's not needed at all anymore, and hasn't for many years. I've also removed the PCI flags for this from some other arches that for some reason defined them, but never used them. This should not change the ordering of any drivers or device probing. [1] The old-style pci_get_device and pci_find_device() still used this sorting order, but there are very few drivers that use these functions, as they are deprecated for use in this manner. If for some reason, a driver rely on the order and uses these functions, the breadth-first boot option will resolve any problem. Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18sh: Fix up L2 cache probe.Paul Mundt
SH7723 is the first hard silicon to implement the L2, and unsurprisingly, does the precise inverse of what the specification alleges. XOR the URAM/L2 size bits to get back in line with the existing parsing logic. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up SH-4A part probe.Paul Mundt
The SH-4A series probe we were relying on doesn't work any more on the newer parts, bump this up to use CVR.CHIP instead so we have consistent behaviour across all of the parts, which is what this should have been testing in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up SH7763 build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add migor_ts support to MigoRMagnus Damm
Add support for the migor_ts touch panel to the MigoR board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 11:55:39 +0000