summaryrefslogtreecommitdiff
path: root/arch/sh/kernel
AgeCommit message (Collapse)Author
2008-09-08kernel/cpu.c: create a CPU_STARTING cpu_chain notifierManfred Spraul
Right now, there is no notifier that is called on a new cpu, before the new cpu begins processing interrupts/softirqs. Various kernel function would need that notification, e.g. kvm works around by calling smp_call_function_single(), rcu polls cpu_online_map. The patch adds a CPU_STARTING notification. It also adds a helper function that sends the message to all cpu_chain handlers. Tested on x86-64. All other archs are untested. Especially on sparc, I'm not sure if I got it right. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.Paul Mundt
Follows the SH change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-05sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.Carmelo Amoroso
This patch fixes a problem within the SH implementation of resume_kernel code, that implements in assembly the bulk of preempt_schedule_irq function without taking care of the extra code needed to handle the BKL preemptible. The patch basically consists of removing this asm code and calling the common C implementation (see kernel/sched.c) as other archs do. Another change is the missing 'cli' macro invocation at the beginning of the resume_kernel. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: fix semtimedop syscallYoshihiro Shimoda
fix the problem that cannot work semtimedop system call. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: fix kexec entry point for crash kernelsMagnus Damm
The crash kernel entry point is currently checked by the kexec kernel code and only physical addresses in the reserved memory window are accepted. This means that we can't pass P2 or P1 addresses as entry points in the case of crash kernels. This patch makes sure we can start crash kernels by adding support for physical address entry points. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: crash kernel resource fixMagnus Damm
The reserved crash kernel memory range is currently missing from /proc/iomem. crashk_res is mistakenly setup after __add_active_range(). Reorder things to make sure the resource shows up in /proc/iomem. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-25sh: fix ptrace_64.c:user_disable_single_step()Adrian Bunk
This patch fixes the following compile error caused by commit c459dbf294b4a3d70490a468a7ca3907fb2c2f57 (sh: ptrace single stepping cleanups.): <-- snip --> ... CC arch/sh/kernel/ptrace_64.o arch/sh/kernel/ptrace_64.c: In function 'user_disable_single_step': arch/sh/kernel/ptrace_64.c:134: error: 'regs' undeclared (first use in this function) arch/sh/kernel/ptrace_64.c:134: error: (Each undeclared identifier is reported only once arch/sh/kernel/ptrace_64.c:134: error: for each function it appears in.) ... make[2]: *** [arch/sh/kernel/ptrace_64.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: export sh7723 VEU as VEU2HMagnus Damm
Export sh7723 VEU hardware blocks as VEU2H. The sh7723 VEU2H differs a bit from the sh7722 VEU so use different names for our UIO devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc.Yoshinori Sato
rsk7203_defconfig fails to build with the following error: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o:(__ksymtab+0xb8): undefined reference to `__udivsi3_i4i' arch/sh/kernel/built-in.o:(__ksymtab+0xc8): undefined reference to `__sdivsi3_i4i' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> That worked with 2.6.26, and these are far less undefined references than in the cases where libgcc was missing. [ These symbols are not defined on SH-2 versions of libgcc, so we have to special case the export there. - Paul ] Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Save NUMA node data in vmcore for crash dumps.Paul Mundt
Presently the NUMA node data isn't saved on kexec. This implements a simple arch_crash_save_vmcoreinfo() for saving off the relevant data. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: module_alloc() should be using vmalloc_exec().Paul Mundt
SH-X2 extended mode TLB allows for toggling of the exec bit, so make sure we are using the right protection bits for module space there also. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up __bug_table handling in module loader.Paul Mundt
We should be calling in to the lib/bug.c module helpers, fix that up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up broken kerneldoc comments.Paul Mundt
These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Fix up the audit arch endian specification.Paul Mundt
Presently this was always being set to AUDIT_ARCH_SH, which assumes big endian. Fix this up so that the architecture actually reflects what we're running on. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.Paul Mundt
This follows the changes in commits: 7d6d637dac2050f30a1b57b0a3dc5de4a10616ba 4f72c4279eab1e5f3ed1ac4e55d4527617582392 on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall tracing to be more generic. This is an incremental step to turning on tracehook, as well as unifying more of the ptrace and signal code across the 32/64 split. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: ptrace single stepping cleanups.Paul Mundt
This converts the single stepping done by sh/sh64 ptrace implementations to use the generic user_enable/disable_single_step(), and subsequently rips out a lot of ptrace request cases that are now handled generically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: seccomp support.Paul Mundt
This hooks up the seccomp thread flag and associated callback from the syscall tracer. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Tidy up the _TIF work masks, and fix syscall trace bug on singlestep.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02kdump: sh: parse elfcorehdr command line argumentSimon Horman
A quick cut and paste from other architectures to allow SH to parse the elfcorehdr command line argument which is required for both is_kdump_kernel() and vmcore to function. (the former is as yet unused on SH). Tested compilation only Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Move out the solution engine headers to arch/sh/include/mach-se/Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Add an arch/sh/kernel/.gitignorePaul Mundt
Ignore vmlinux.lds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: migrate to arch/sh/include/Paul Mundt
This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Wire up new syscalls.Paul Mundt
This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 syscalls. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Don't miss pending signals returning to user mode after signal processingStuart MENEFY
Without this patch, signals sent during architecture specific signal handling (typically as a result of the user's stack being inaccessible) are ignored. This is the SH version of commit c3ff8ec31c1249d268cd11390649768a12bec1b9 which was for the i386. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7366Magnus Damm
Use clk_always_enable() in the sh7366 processor code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7343 / SE77343Magnus Damm
Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722Magnus Damm
Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7723 / ap325rxaMagnus Damm
Use clk_always_enable() on the sh7723 processor and in the ap325rxa board code. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Show all clocks and their state in /proc/clocksMagnus Damm
Show all clocks in /proc/clocks, and also show if they are enabled or disabled. This is useful to show MSTPCR bits on SuperH Mobile processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Merge sh7343 and sh7722 clock codeMagnus Damm
This code makes sh7343 share the sh7722 clock code. Instead of just using the good and very old sh7343 clock implmentation, switch to the new MSTPCR enabled clock code. SIU clocks are disabled on sh7343 for now. With this change all SuperH Mobile devices now use the same clock code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile MSTPCR bits to clock frameworkMagnus Damm
Handle module stop clock bits in MSTPCRn through the clock framework. The clocks are named after the bits in the data sheet. The association between bit number and hardware block is processor specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use arch_flags to simplify sh7722 siu clock codeMagnus Damm
Make use of arch_flags to simplify the SIU clock code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add memory chunks to SH-Mobile UIO devicesMagnus Damm
This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirqMagnus Damm
This patch exports the VPU, VEU(1) and VEU(2) blocks of the sh7366 to user space using the uio_pdrv_genirq platform driver. While at it, fix up the VEU(2) interrupt vector. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirqMagnus Damm
This patch exports the VPU, VEU2H0 and VEU2H1 blocks of the sh7723 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7722 VPU and VEU using uio_pdrv_genirqMagnus Damm
This patch exports the VPU and VEU blocks of the sh7722 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Export sh7343 VPU and VEU using uio_pdrv_genirqMagnus Damm
This patch exports the VPU and VEU blocks of the sh7343 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh2(A) exception handler updateYoshinori Sato
This patch is By sh2 - Remove duplicate code - Reduce stack usage - Cleanup and little optimize By sh2a - Add missing handler(256 to 511) - Use sh2a instructions handler Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: update sh7343 codeYoshihiro Shimoda
updated the following codes for SH7343: - add register_intc_controller() - add EARLY_SCIF_CONSOLE_PORT - add define of CPG register Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7366Magnus Damm
This patch adds platform data for the single I2C channel on sh7366. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7723Magnus Damm
This patch adds platform data for the single I2C channel on sh7723. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add SuperH Mobile I2C platform data to sh7343Magnus Damm
This patch adds platform data for two I2C channels to the sh7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: add interrupt ack code to sh4aYoshihiro Shimoda
This patch is based on interrupt acknowledge code for external interrupt sources on sh3 processors and adds on sh4a processors. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Conditionally re-enable IRQs in fault path.Stuart Menefy
The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Record the major cut revision for probed SH-4A parts.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Optimized flush_icache_range() implementation.Chris Smith
Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Stub in silicon cut in CPU info.Stuart Menefy
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Tidy up the SH-3 exception vector table.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28SH7619 add ethernet controler supportYoshinori Sato
- Add EtherC + PHY resource define. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh/kernel/ cleanupsAdrian Bunk
This patch contains the following cleanups: - make the following needlessly global code static: - cf-enabler.c: cf_init() - cpu/clock.c: __clk_enable() - cpu/clock.c: __clk_disable() - process_32.c: default_idle() - time_32.c: struct clocksource_sh - timers/timer-tmu.c: struct tmu_timer_ops - remove the following unused functions (no CONFIG_BLK_DEV_FD on sh): - process_{32,64}.c: disable_hlt() - process_{32,64}.c: enable_hlt() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 03:12:47 +0000