summaryrefslogtreecommitdiff
path: root/arch/sh/boards/Kconfig
AgeCommit message (Collapse)Author
2010-10-29sh: mach-systemh: Kill off dead board.Paul Mundt
This code has been untouched since it was merged many years ago, and has severely bitrotted since, suggesting that the board has no real users left. Notice of intent to remove has been sent out over the last few years, with no takers. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15sh: mach-sdk7786: Add support for the FPGA SRAM.Paul Mundt
This ties in the 2KiB of FPGA SRAM in to the generic SRAM pool. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14sh: mach-sdk7786: Add support for fpga gpios.Paul Mundt
The sdk7786 FPGA supports a number of user settable input switches that are otherwise unused. This wires up a dummy gpio chip for the switch bank to simply expose them to userspace. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-06sh: add sh7757lcr board supportYoshihiro Shimoda
This adds preliminary support for the sh7757lcr board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21sh: SH-2007 board support.Hitoshi Mitake
This patch series adds support for ITO Co., Ltd.'s SH-2007 reference platform (A PC-104 based SH7780 platform). This is a direct port of the out-of-tree board support from the vendor's kernel, originally located at: http://ms-n.org/sh-linux/kernel/ More information on the board and the vendor can be obtained from the vendor's site at: http://www.itonet.co.jp/ Presently supported peripherals are CF and ethernet, with support for the on-board IDE still pending further testing. Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: PIO disabling for x3proto and urquell.Paul Mundt
urquell only provides PIO in the PCI case, while the x3proto board never had a working PCIe controller, so it can simply disable it outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: mach-sdk7786: conditionally disable PIO support.Paul Mundt
SDK7786 only supports PIO via the PCI I/O space, so we disable PIO completely for the non-PCI case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15sh: Generalize SH7786 PCIe support.Paul Mundt
Previously this was only built in for Urquell boards, but the same approach can be used on SDK7786 now that the mode pin reading is supported, so make it generic to SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14sh: Preliminary SDK7786 board support.Paul Mundt
This stubs in some preliminary board support for the RTE SDK7786. This is quite stunted at the moment, and primarily builds on top of the system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity, with initial peripheral support restricted to the debug ethernet. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: disable trapped I/O on SH7785LCR.Paul Mundt
This board doesn't use trapped I/O for anything, so just kill off the select. This was causing problems in the unhandled page fault die path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28sh: sh7785lcr: fix prototype board on 32bit MMU mode.Yoshihiro Shimoda
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Add EcoVec (SH7724) board supportKuninori Morimoto
This adds preliminary support for the EcoVec board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23sh: kfr2r09 board support - SCIF consoleMagnus Damm
This patch adds basic kfr2r09 board support. Only the SCIF1 console is supported with this patch, but this patch and a proper sh7724 configuration is all that is needed. Combine with an initramfs to have a small RAM based kernel and distribution booted as zImage from RAM via JTAG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: pci: Initial PCI-Express support for SH7786 Urquell board.Paul Mundt
This adds initial support for the PCI-Express module in the SH7786, particularly as it relates to the urquell platform. Presently it is only supported in root complex mode, with endpoint mode still requiring more debugging. 29/32-bit mode and lane configurations are selectable via board mode pins, and are otherwise fixed. Only 4x and 1x PCI channels are presently handled, the PCI bridge still requires additional debugging and stabilization in hardware. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: Add ms7724se (SH7724) board supportKuninori Morimoto
This adds preliminary support for the ms7724se solution engine board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30sh: pass through ioremap() for non-mmu processors.Magnus Damm
All 32-bit SuperH processors currently go through __ioremap_mode() and check for IO_TRAPPED and directly mapped segments. With this patch we simplify the MMU less case with a pass through version of __ioremap_mode() which just returns the physical address. The effects of this is change are: - fix non-MMU ioremap() of high address hardware blocks (sh7203 CMT) - make sure IO_TRAPPED is not selected Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-21sh: add support for SMSC Polaris platformSteve Glendinning
Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118 ethernet controller. This patch adds support for it. Updated following feedback from Nobuhiro Iwamatsu. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17sh: espt-giga board supportNobuhiro Iwamatsu
This adds support for the ESPT-Giga (Ethernet Serial Parallel Translator) SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.html Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10sh: sh7785lcr: Updates for fixed PMB.Yoshihiro Shimoda
Add a new defconfig for SH7785LCR in 32-bit mode, and update the power off code to avoid 29-bit assumptions. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: Urquell board support.Kuninori Morimoto
This adds preliminary support for the SH7786-based Urquell board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27sh: mach-highlander and mach-rsk require gpiolib.Paul Mundt
Fix up the build for mach-highlander and mach-rsk. These operated on the assumption that GENERIC_GPIO support with an optional GPIOLIB was possible. This used to be true, but has not been the case since commit-id d56cc8bc661ac1ceded8d45ba2d53bb134fee17d ("sh: use gpiolib"), where the GENERIC_GPIO implementation was rewritten to use GPIOLIB directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27sh: use gpiolibMagnus Damm
This patch updates the SuperH gpio code to make use of gpiolib. The gpiolib callbacks get() and set() are lockless, but we use our own spinlock for the other operations to make sure hardware register bitfield accesses stay atomic. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt
RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7720 GPIO on magicpanelr2 boardMagnus Damm
This patch hooks up the magicpanelr2 board with the sh7720 pinmux code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7203 GPIO on rsk7203 boardMagnus Damm
Make the rsk7203 board use the newly added sh7203 pinmux code. Only a single LED plus the serial console pins for now. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7723 GPIO on AP325RXA boardMagnus Damm
This patch enables the GPIO code on AP325RXA and converts the code from register based pinmux configuration to GPIO based pin by pin setup. While at it 2 LEDs and one switch are added and exported to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20sh: Use sh7722 GPIO on Migo-R boardMagnus Damm
This patch enables the GPIO code on Migo-R and converts the code from register based pinmux configuration to GPIO based pin by pin setup. Fix whitespace damage while at it and add 2 LEDs and export them to user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Add Renesas EDOSK7760 board support.Luca Santini
This adds support for the Renesas (RTE) EDOSK7760 board. Currently supported devices are: - ramdisk support - ethernet support - nfs support - ext2/ext3 support - i2c support - fb support (M) Signed-off-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30sh: Move out individual boards without mach groups.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: Move out the solution engine headers to arch/sh/include/mach-se/Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 20:39:45 +0000